scholarly journals Biological Resistance of Elm (Ulmus carpinifolia var. Umbelifera) Trees against Fungal Endophytes and White Rot Decay Fungi

2020 ◽  
Vol 3 (1) ◽  
pp. 1
Author(s):  
Huijun Dong ◽  
Mina Raiesi ◽  
Mohsen Bahmani ◽  
Ali Jafari ◽  
Hamed Aghajani
Keyword(s):  
Abiotic Factors ◽  
Fungal Endophytes ◽  
Wood Properties ◽  
Urban Trees ◽  
White Rot ◽  
Bending Test ◽  
Decay Fungi ◽  
Impact Bending ◽  
Decay Tests ◽  
The Impact

Urban trees are one of the valuable storage in metropolitan areas. Nowadays, a particular attention is paid to the trees and spends million dollars per year to their maintenance. Trees are often subjected to abiotic factors, such as fungi, bacteria, and insects, which lead to decline mechanical strength and wood properties. The objective of this study was to determine the potential degradation of Elm tree wood by Phellinus pomaceus fungi, and Biscogniauxia mediteranae endophyte. Biological decay tests were done according to EN 113 standard and impact bending test in accordance with ASTM-D256-04 standard. The results indicated that with longer incubation time, weight loss increased for both sapwood and heartwood. Fungal deterioration leads to changes in the impact bending. In order to manage street trees, knowing tree characteristics is very important and should be regularly monitored and evaluated in order to identify defects in the trees.

Growth behavior of wood-destroying fungi in chemically modified wood: wood degradation and translocation of nitrogen compounds

Holzforschung ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Lukas Emmerich ◽  
Maja Bleckmann ◽  
Sarah Strohbusch ◽  
Christian Brischke ◽  
Susanne Bollmus ◽  
...  
Keyword(s):  
Protective Action ◽  
Treated Wood ◽  
Untreated Wood ◽  
Brown Rot ◽  
Decay Resistance ◽  
White Rot ◽  
Decay Fungi ◽  
Chemically Modified ◽  
Decay Tests ◽  
Modified Wood

Abstract Chemical wood modification has been used to modify wood and improve its decay resistance. However, the mode of protective action is still not fully understood. Occasionally, outdoor products made from chemically modified timber (CMT) show internal decay while their outer shell remains intact. Hence, it was hypothesized that wood decay fungi may grow through CMT without losing their capability to degrade non-modified wood. This study aimed at developing a laboratory test set-up to investigate (1) whether decay fungi grow through CMT and (2) retain their ability to degrade non-modified wood. Acetylated and 1,3-dimethylol-4,5-dihydroxyethyleneurea (DMDHEU) treated wood were used in decay tests with modified ‘mantle specimens’ and untreated ‘core dowels’. It became evident that white rot (Trametes versicolor), brown rot (Coniophora puteana) and soft rot fungi can grow through CMT without losing their ability to degrade untreated wood. Consequently, full volume impregnation of wood with the modifying agent is required to achieve complete protection of wooden products. In decay tests with DMDHEU treated specimens, significant amounts of apparently non-fixated DMDHEU were translocated from modified mantle specimens to untreated wood cores. A diffusion-driven transport of nitrogen and DMDHEU seemed to be responsible for mass translocation during decay testing.

scholarly journals The Spread of Corrosion in Cast Iron and its Effect on the Life Cycle of Transportation Vehicles

2017 ◽  
Vol 65 (2) ◽  
pp. 383-389 ◽  
Author(s):  
Tomáš Binar ◽  
Jiří Švarc ◽  
Petr Dostál ◽  
Michal Šustr ◽  
Jan Tippner
Keyword(s):  
Impact Strength ◽  
Fractographic Analysis ◽  
Bending Test ◽  
Material Surface ◽  
Bending Tests ◽  
Corrosion Tests ◽  
Fracture Surfaces ◽  
Impact Bending ◽  
Notch Impact Strength ◽  
The Impact

This article deals with the spread of corrosion in material at different exposure times, and its effect on the measured brittle fracture and notch impact strength under different temperature conditions. To assess the degradational effect of corrosion on the material characteristics represented by the measured impact strength, we conducted a fractographic analysis of fracture surfaces, the aim of which was to evaluate the spread of corrosion in the material. In the first part of the experiment, two corrosion tests are simulated with a duration time of 432 and 648 hours, to compare the degradation effect of corrosion on the notch impact strength, depending on the duration of the corrosion tests. The following part shows the results of the impact bending test, where the experiment was conducted in an area of reduced and increased temperatures. The final part summarizes the results of the fractographic analysis of sample fracture surfaces from the impact bending tests. Based on the measured the length of the corrosion cracks, we analyzed the sample at the notch and from the material surface after the impact bending test.

Impact Resistance of SM Joints Formed With ICA

2002 ◽  
Vol 124 (4) ◽  
pp. 374-378 ◽  
Author(s):  
C. M. Lawrence Wu ◽  
Robert K. Y. Li ◽  
N. H. Yeung
Keyword(s):  
Impact Damage ◽  
Impact Resistance ◽  
High Energy ◽  
Bending Test ◽  
Conductive Adhesives ◽  
Energy Impact ◽  
Split Hopkinson ◽  
Post Impact ◽  
Impact Bending ◽  
The Impact

Isotropic conductive adhesives (ICA) have been considered as replacement materials for lead-tin solder alloys. In this paper, the post-impact shear strength of ICA surface mount (SM) joints was obtained experimentally and compared with that of SM lead-tin joints. The dynamic impact energy was provided in the form of three-point bending on the PCB using equipment called the split Hopkinson bar. Strain rates of over 4000/s were used for the impact bending test. The action of impact bending was used to simulate the effect on the PCB and the interconnection as a result of high energy impact on an electronic equipment. Shear test was then performed to examine the change in strength of the ICA joints as a result of impact damage. It was found that the SM ICA joints failed due to impact at a strain rate just over 4000/s. Microstructural examination carried out using a scanning electron microscope revealed that the interface between the ICA and copper pad on the PCB was the weakest region of the joint.

Combined effect of boron compounds and heat treatments on wood properties: Boron release and decay and termite resistance

Holzforschung ◽  
2006 ◽  
Vol 60 (4) ◽  
pp. 455-458 ◽  
Author(s):  
S. Nami Kartal
Keyword(s):  
Brown Rot ◽  
Wood Properties ◽  
Decay Resistance ◽  
Heat Treatments ◽  
Coptotermes Formosanus ◽  
White Rot ◽  
White Rot Fungus ◽  
Termite Resistance ◽  
Brown Rot Fungus ◽  
Decay Tests

Abstract The decay and termite resistance of boric acid (BA)- and di-sodium octoborate tetrahydrate (DOT)-treated sugi sapwood was tested in the context of additional heat treatments at two temperature levels. Heat treatments had no effect on boron release and almost all boron was leached from specimens during a 10-day weathering period. Decay tests with the brown-rot fungus Fomitopsis palustris and the white-rot fungus Trametes versicolor and a 3-week termite resistance test with the subterranean termite Coptotermes formosanus were performed. Heat treatments did not increase the decay resistance of either BA- or DOT-treated specimens against the brown-rot fungus. However, the decay resistance of BA-treated specimens against the same fungus increased after heat treatment at 220°C for 2 h. Heat treatments at 180°C for 4 h and 220°C for 2 h also resulted in increased decay resistance of DOT-treated specimens against T. versi-color. Increased resistance against termite attack was observed only in DOT-treated specimens heated at 180°C for 4 h or at 220°C for 2 h. Accordingly, a synergistic effect between heat and DOT treatments was observed for resistance against white-rot decay and termites.

Mechanical properties and chemical composition of beech wood exposed for 30 and 120 days to white-rot fungi

Holzforschung ◽  
2015 ◽  
Vol 69 (5) ◽  
pp. 587-593 ◽  
Author(s):  
Ehsan Bari ◽  
Hamid Reza Taghiyari ◽  
Behbood Mohebby ◽  
Carol A. Clausen ◽  
Olaf Schmidt ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Chemical Composition ◽  
Beech Wood ◽  
White Rot Fungi ◽  
White Rot ◽  
Chemical Components ◽  
Fungal Decay ◽  
Oriental Beech ◽  
Impact Bending ◽  
Decay Tests

Abstract The effects of exposing specimens of Oriental beech [Fagus sylvatica subsp. orientalis (Lipsky) Greuter and Burdet] to the white-rot fungi Pleurotus ostreatus (Jacq.: Fr.) Kummer and Trametes versicolor (L.: Fr.) Pilát strain 325 have been studied concerning the mechanical properties and chemical composition in terms of carbohydrates, cellulose, and lignin. Biological decay tests were carried out in accordance with the EN 113 standard specifications for 30 and 120 days. P. ostreatus had nearly the same deteriorating effects on the mechanical properties and chemical composition as that caused by T. versicolor. High and significant correlations were found between some mechanical properties with chemical components; for instance, the correlation coefficient (R2) between impact bending and carbohydrate content was about 0.96. The changes of components influence the various mechanical properties to a different degree. Incipient fungal decay caused severe changes for impact bending and carbohydrate loss. Several other properties declined at 120-day exposure time, such as the hardness, compression strength parallel to grain, and cellulose and lignin losses.

Impact Resistance of SM Joints Formed With ICA

2003 ◽  
Vol 125 (1) ◽  
pp. 93-97 ◽  
Author(s):  
C. M. Lawrence Wu ◽  
Robert K. Y. Li ◽  
N. H. Yeung
Keyword(s):  
Impact Damage ◽  
Impact Resistance ◽  
High Energy ◽  
Bending Test ◽  
Conductive Adhesives ◽  
Energy Impact ◽  
Split Hopkinson ◽  
Post Impact ◽  
Impact Bending ◽  
The Impact

Isotropic conductive adhesives (ICA) have been considered as replacement materials for lead-tin solder alloys. In this paper, the post-impact shear strength of ICA surface mount (SM) joints was obtained experimentally and compared with that of SM lead-tin joints. The dynamic impact energy was provided in the form of three-point bending on the PCB using equipment called the split Hopkinson bar. Strain rates of over 4000/s were used for the impact bending test. The action of impact bending was used to simulate the effect on the PCB and the interconnection as a result of high energy impact on an electronic equipment. Shear test was then performed to examine the change in strength of the ICA joints as a result of impact damage. It was found that the SM ICA joints failed due to impact at a strain rate just over 4000/s. Microstructural examination carried out using a scanning electron microscope revealed that the interface between the ICA and copper pad on the PCB was the weakest region of the joint.

Evaluation of Impact Bending Strength of Ceramic Composites at Ultra-High Temperatures from 1500-2000 °C in Air

2013 ◽  
Vol 591 ◽  
pp. 145-149 ◽  
Author(s):  
De Tian Wan ◽  
Yi Wang Bao ◽  
Hua Zhao ◽  
Yuan Tian
Keyword(s):  
High Temperatures ◽  
Bending Strength ◽  
Impact Load ◽  
Ceramic Composites ◽  
Test Method ◽  
Bending Test ◽  
Dynamic Force ◽  
Maximal Load ◽  
Impact Bending ◽  
The Impact

In this work, a new and novel test method was developed to determine the impact bending strength of ceramic composites at ultra-high temperature from 1500-2000 °C in air. Three-point impact bending test was carried out through a SiC pressure head with a dynamic force sensor fixed on a slider and movable along a guide rail. The impact load was adjusted by different saving energy and the impact speed was lower than 0.5 m/s. The center of the sample was heated up to about 1500-2000°C by oxygen-assisted spray combustion. An impact load was put on the specimen and the impact force was recorded automatically. The impact bending strength can be calculated from the maximal load and the sample size. To check the availability and reliability for this method, several ceramics including SiC, ZrB2/SiC and C/C fiber reinforced composite without coating, were used as the testing samples. The results indicate that this method is a good and feasible method for evaluating the mechanical properties of the ceramic composite at ultra-high temperatures.

On the impact bending test technique for high-strength pipe steels

2015 ◽  
Vol 2015 (10) ◽  
pp. 851-860
Author(s):  
A. M. Arsenkin ◽  
P. D. Odesskii ◽  
I. P. Shabalov ◽  
M. V. Likhachev
Keyword(s):  
High Strength ◽  
Bending Test ◽  
Pipe Steels ◽  
Test Technique ◽  
Impact Bending ◽  
The Impact
Sign in / Sign up

Export Citation Format

Share Document