scholarly journals Design of Nonwoven Carpets to Upgrade Sound Isolation Features in Automobiles

2014 ◽  
Vol 14 (4) ◽  
pp. 270-280 ◽  
Author(s):  
Raziye Atakan ◽  
Hale Karakaş ◽  
Serdar Sezer ◽  
Süleyman İpek ◽  
İpek Aravi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Sound Absorption ◽  
Transmission Loss ◽  
Sound Transmission ◽  
Sound Insulation ◽  
Frequency Range ◽  
Absorption Coefficients ◽  
Floor Coverings ◽  
Effective Part ◽  
Heavy Layer

Abstract With the increases of the expected properties of textile products, better and advanced new designs are being created. Textiles used in vehicles are increasing, and the current performance of the expectations bar is determined by automobile manufacturers. While meeting the expectations of users in the vehicle mechanically, but also disturbing the user during operation of the mechanical properties of this ratio should be minimized. This study was intended to minimize sound transmission of nonwoven textile components, which are used in cars as silencer parts. For that purpose, four different models were developed in this study. First model consists of three designs for baggage carpets. Second model has six designs for floor coverings. Third model comprises two designs inner dash felt and finally fourth model includes two designs of hood liners. The acoustical absorption coefficients and transmission loss of these carpets were tested and evaluated in the frequency range of 16-6300 Hz. The measurements demonstrated that nonwoven layer is a very significant and effective part of a carpet due to its contribution in the sound isolation. With this study, it has been determined which layer has better performance on sound absorption and transmission loss among different carpet types. A combination of heavy layer and nonwoven layer carpets is found to be benefit for noise and sound insulation.

scholarly journals Non-Wovens as Sound Reducers

2018 ◽  
Vol 55 (2) ◽  
pp. 64-76
Author(s):  
D. Belakova ◽  
A. Seile ◽  
S. Kukle ◽  
T. Plamus
Keyword(s):  
Absorption Coefficient ◽  
Surface Density ◽  
Sound Absorption ◽  
Transmission Loss ◽  
Sound Transmission ◽  
Sound Insulation ◽  
Material Structure ◽  
Sound Transmission Loss ◽  
Sound Waves ◽  
Frequency Range

Abstract Within the present study, the effect of hemp (40 wt%) and polyactide (60 wt%), non-woven surface density, thickness and number of fibre web layers on the sound absorption coefficient and the sound transmission loss in the frequency range from 50 to 5000 Hz is analysed. The sound insulation properties of the experimental samples have been determined, compared to the ones in practical use, and the possible use of material has been defined. Non-woven materials are ideally suited for use in acoustic insulation products because the arrangement of fibres produces a porous material structure, which leads to a greater interaction between sound waves and fibre structure. Of all the tested samples (A, B and D), the non-woven variant B exceeded the surface density of sample A by 1.22 times and 1.15 times that of sample D. By placing non-wovens one above the other in 2 layers, it is possible to increase the absorption coefficient of the material, which depending on the frequency corresponds to C, D, and E sound absorption classes. Sample A demonstrates the best sound absorption of all the three samples in the frequency range from 250 to 2000 Hz. In the test frequency range from 50 to 5000 Hz, the sound transmission loss varies from 0.76 (Sample D at 63 Hz) to 3.90 (Sample B at 5000 Hz).

An improved approach for normal-incidence sound transmission loss measurement using a four-microphone impedance tube

2020 ◽  
pp. 107754632092690
Author(s):  
Zechao Li ◽  
Sizhong Chen ◽  
Zhicheng Wu ◽  
Lin Yang
Keyword(s):  
Transfer Matrix ◽  
Sound Absorption ◽  
Transmission Loss ◽  
Sound Transmission ◽  
Normal Incidence ◽  
Sound Insulation ◽  
Sound Transmission Loss ◽  
The Common ◽  
Wavefield Decomposition ◽  
Insulation Performance

The main aim of this study is to introduce an improved method for determining the sound properties of acoustic materials which is more precise than the common wavefield decomposition method and simpler than the common transfer matrix method. In the first part of the article, a group of formulae for calculating sound transmission loss is represented by combining the wavefield decomposition and transfer matrix methods. Subsequently, a formula for calculating sound absorption coefficients is derived from these formulae by definition. Furthermore, the present formulae are validated by comparing the experimental results achieved with the present formulae and those results obtained by other methods recorded in published articles. Eventually, it is demonstrated that the method can accurately measure the sound insulation performance of materials and the sound absorption properties of limp and lightweight materials.

Incorporation of Nanofiber Layers in Nonwoven Materials for Improving Their Acoustic Properties

2013 ◽  
Vol 8 (4) ◽  
pp. 155892501300800 ◽  
Author(s):  
Amir Rabbi ◽  
Hossein Bahrambeygi ◽  
Ahmad Mousavi Shoushtari ◽  
Komeil Nasouri
Keyword(s):  
Sound Absorption ◽  
Transmission Loss ◽  
Sound Transmission ◽  
Wide Band ◽  
Acoustic Properties ◽  
Sound Insulation ◽  
Sound Transmission Loss ◽  
Factors Affecting ◽  
Nonwoven Materials ◽  
Field Noise

Due to numerous developments in most industries and the increase in the usage of massive and powerful machines in every field, noise has become an unavoidable part of mechanized life and has brought about serious health hazards. The main aim of this work was to investigate the usability of polyurethane and polyacrylonitrile nanofibers for improving sound insulation properties over a wide band of frequencies and reducing weight and thickness of conventional polyester and wool nonwovens. The effect of the number of nanofiber layers and associated surface densities on acoustic properties was investigated. Sound transmission loss and sound absorption analysis using the impedance tube method were carried out as the main factors affecting acoustic behavior of samples. The results show that incorporation of nanofiber layers in nonwoven materials can improve both sound absorption and sound transmission loss simultaneously, especially in mid and lower frequencies, which are difficult to detect by conventional materials.

scholarly journals Analysis of the transmission loss of double-leaf panels with an equivalent spring–mass model for studs

2020 ◽  
Vol 37 ◽  
pp. 126-133
Author(s):  
Yuan-Wei Li ◽  
Chao-Nan Wang
Keyword(s):  
Distribution Curve ◽  
Transmission Loss ◽  
Sound Transmission ◽  
Experimental Results ◽  
Sound Insulation ◽  
Sound Transmission Loss ◽  
Mass Model ◽  
Steel Stud ◽  
Panel Thickness ◽  
Stiffness Distribution

Abstract The purpose of this study was to investigate the sound insulation of double-leaf panels. In practice, double-leaf panels require a stud between two surface panels. To simplify the analysis, a stud was modeled as a spring and mass. Studies have indicated that the stiffness of the equivalent spring is not a constant and varies with the frequency of sound. Therefore, a frequency-dependent stiffness curve was used to model the effect of the stud to analyze the sound insulation of a double-leaf panel. First, the sound transmission loss of a panel reported by Halliwell was used to fit the results of this study to determine the stiffness of the distribution curve. With this stiffness distribution of steel stud, some previous proposed panels are also analyzed and are compared to the experimental results in the literature. The agreement is good. Finally, the effects of parameters, such as the thickness and density of the panel, thickness of the stud and spacing of the stud, on the sound insulation of double-leaf panels were analyzed.

scholarly journals Diffuse Sound Absorptive Properties of Parallel-Arranged Perforated Plates with Extended Tubes and Porous Materials

Materials ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1091 ◽  
Author(s):  
Dengke Li ◽  
Daoqing Chang ◽  
Bilong Liu
Keyword(s):  
Boundary Condition ◽  
Porous Material ◽  
Porous Materials ◽  
Sound Absorption ◽  
Azimuthal Angle ◽  
Octave Band ◽  
Frequency Range ◽  
Absorption Coefficients ◽  
Perforated Plates ◽  
Absorption Performance

The diffuse sound absorption was investigated theoretically and experimentally for a periodically arranged sound absorber composed of perforated plates with extended tubes (PPETs) and porous materials. The calculation formulae related to the boundary condition are derived for the periodic absorbers, and then the equations are solved numerically. The influences of the incidence and azimuthal angle, and the period of absorber arrangement are investigated on the sound absorption. The sound-absorption coefficients are tested in a standard reverberation room for a periodic absorber composed of units of three parallel-arranged PPETs and porous material. The measured 1/3-octave band sound-absorption coefficients agree well with the theoretical prediction. Both theoretical and measured results suggest that the periodic PPET absorbers have good sound-absorption performance in the low- to mid-frequency range in diffuse field.

Sound insulation performance of pyramidal truss core sandwich structure with frame

2021 ◽  
pp. 109963622110288
Author(s):  
Yu-Zhou Wang ◽  
Li Ma
Keyword(s):  
Mechanical Properties ◽  
Sandwich Structure ◽  
Transmission Loss ◽  
Low Frequency ◽  
Sound Insulation ◽  
Geometrical Parameters ◽  
Acoustic Performance ◽  
Truss Core ◽  
Pyramidal Truss ◽  
Wave Angle

Recently, sandwich structures have been widely used in different fields because of their good mechanical properties, but these structures are weak in acoustic performance. In this paper, by combining pyramidal truss core sandwich structure with frame, a new structure is proposed with both good mechanical properties and excellent acoustic performance at low frequency. An analytical model of the pyramidal truss core sandwich structure with frame is developed to investigate the sound transmission loss (STL) performance. Finite element method (FEM) is also used to investigate the STL performance at low frequency. The effects of the incident wave angle and the geometrical parameters on the STL of the structure are discussed.

Sign in / Sign up

Export Citation Format

Share Document