scholarly journals COMPARATIVE PERFORMANCE OF VARIOUS SUNFLOWER HYBRIDS FOR YIELD AND ITS RELATED ATTRIBUTES

2013 ◽  
Vol 46 (4) ◽  
pp. 57-64 ◽  
Author(s):  
M.A. Sarwar ◽  
M.N. Khalil-Ur-Rehman ◽  
H.M.R. Javeed ◽  
W. Ahmad ◽  
M.A. Shehzad ◽  
...  
Keyword(s):  
Statistical Analysis ◽  
Block Design ◽  
Research Area ◽  
Climatic Conditions ◽  
Comparative Performance ◽  
Area Index ◽  
Head Diameter ◽  
High Productivity ◽  
Plot Size ◽  
Randomized Complete Block Design

ABSTRACT An experiment to evaluate comparative performance of various sunflower hybrids for yield and its related attributes was conducted at the Agronomic Research Area, University of Agriculture, Faisalabad, Pakistan, during autumn 2008. Twelve sunflower hybrids, i.e. G-101 (H1), DK-4040 (H2), SF-187 (H3), S-278 (H4), Hysun-33 (H5), FH-37 (H6), Ausigold-61 (H7), Ausigold-62 (H8), FSS-50 (H9), NX- 00989 (H10), NX-00997 (H11) and XIYU-12 (H12) were included in the trail. The experiment was laid out in randomized complete block design (RCBD), having three replicates with plot size of 5m x 3m. Statistical analysis of the data showed significant differences for all the parameters. It was observed that Hysun-33 showed greater plant height (148.47 cm) and achene per head (682.70) than all other hybrids, however in case of yield (3891.0 kg ha-1) and other related traits such as number of plants m-2, leaf area index, head diameter and 1000-achene weight SF-187 displayed better performance by recording values (6.87), (4.33), (18.62) and (49.11g), respectively, following Hysun-33 for most of the traits. From the results of experiment it can be concluded that the hybrids SF-187 and Hysun-33 showed high productivity and are best adapted to the climatic conditions of Faisalabad.

scholarly journals Ratooning Response of Lowland Rice NSIC Rc352 (Oryza sativa L.) to Method of Nitrogen Application

2020 ◽  
Vol 8 (2) ◽  
pp. 63-74
Author(s):  
Dionesio Banoc ◽  
Keyword(s):  
Oryza Sativa L ◽  
Block Design ◽  
N Fertilization ◽  
Lowland Rice ◽  
Ratoon Crop ◽  
N Application ◽  
Area Index ◽  
High Productivity ◽  
Days To Heading ◽  
Randomized Complete Block Design

This study seeks to determine the effect of N fertilization method on ratoon lowland rice performance, to choose a fertilization method that provides high ratooned yield, and to assess its profitability adopting N fertilization method. The experiment lays out in a Randomized Complete Block Design with three replications and five N fertilization methods as treatments. Method of N application significantly affected the number of days to heading and maturity, plant height, leaf area index (LAI), number of productive tillers hill-1, panicle length and weight, number of filled and unfilled grains panicle-1. This method compensates cost of production of growing ratoon crop than those of the main crop. In fact, the highest profit (PhP25,564.80) was obtained in ratooned plants, which received 60 kg ha-1 N basal + 30 kg ha-1 N topdress application (T3) due to higher grain yield. Thereby, this is an appropriate option that provides high productivity and income for the ratoon growers.

scholarly journals Impact of Zinc and Manganese Application to Increase Productivity of Autumn Planted Maize (Zea Mays L.)

2015 ◽  
Vol 47 (4) ◽  
pp. 65-70 ◽  
Author(s):  
H.Z. Khan ◽  
M. Amin ◽  
N. Akbar ◽  
M.F. Saleem ◽  
A. Iqbal ◽  
...  
Keyword(s):  
Zea Mays ◽  
Seed Protein ◽  
Zea Mays L ◽  
Block Design ◽  
Research Area ◽  
Seed Protein Content ◽  
Plot Size ◽  
Randomized Complete Block Design ◽  
Biological Yield ◽  
Increase Productivity

Abstract Micronutrients play a significant role in various plant metabolic processes and are required in much smaller amount by the plants as compared to the macronutrients. An experiment was conducted during 2011, at the Agronomic research area, University of Agriculture, Faisalabad, Pakistan, to investigate the response of autumn planted maize to ZnSO4 and MnSO4 levels (10, 20 and 30 kg ha-1) and in combinations (5 kg ha-1 ZnSO4 + 5 kg ha-1 MnSO4, 10 kg ha-1 ZnSO4 + 10 kg ha-1 MnSO4 and 15 kg ha-1 ZnSO4 + 15 kg ha-1 MnSO4). The randomized complete block design (RCBD) having three replicates was used with plot size of 3 m x 6 m. The crop was planted on ridges 75 cm apart with recommended plant to plant distance of 25 cm. Maximum values for plant height at maturity (225 cm), cob diameter (4.29 cm), number of grains per cob (415), biological yield (20.15 tons ha-1), grain yield (7.42 tons ha-1) and seed protein content (8.96%) were recorded where 15 kg ha-1 ZnSO4 + 15 kg ha-1 MnSO4 was applied.

Genetic Analysis of Half Diallel Matting with Different Methods and their Comparisons for Yield and its Associated Traits in Sunflower under Saline Soil Stress Conditions

Helia ◽  
2017 ◽  
Vol 40 (66) ◽  
Author(s):  
Mohamed Ali Abd El-Satar
Keyword(s):  
Genetic Analysis ◽  
Agricultural Research ◽  
Saline Soil ◽  
Block Design ◽  
Diallel Cross ◽  
Head Diameter ◽  
Physiological Maturity ◽  
Randomized Complete Block Design ◽  
Soil Stress ◽  
Half Diallel

AbstractA half diallel cross between five divergent sunflower genotypes was evaluated under two contrast locations of Kafr El-Hamam (fovourable soil as a control) and Tag Al-Ezz (as salt affected soil) Agricultural Research Stations using randomized complete block design with three replications. High significance variation among genotypes and their components was detected for all studied traits at both and combined locations. Selection in early generations would be effective at both locations for improving days to 50 % flowering, days to physiological maturity, plant height, head diameter, No. of green leaves plant

scholarly journals Evaluasi Genotipe Tomat Hasil Iradiasi Sinar Gamma di Dataran Rendah

2018 ◽  
Vol 46 (2) ◽  
pp. 189
Author(s):  
Muhammad Roiyan Romadhon ◽  
Surjono Hadi Sutjahjo ◽  
Dan Siti Marwiyah
Keyword(s):  
Bacterial Wilt ◽  
High Weight ◽  
Block Design ◽  
High Productivity ◽  
Bacterial Wilt Disease ◽  
Fruit Cracking ◽  
Yield Trial ◽  
Randomized Complete Block Design ◽  
Lowland Area ◽  
Low Altitude

<p><em></em><em>ABSTRACT<br /><br />Bacterial wilt and fruit cracking are serious problems in tomatoes cultivation in the lowland area. This research aimed to evaluate the yield of M4 generation of tomatoes in the field and the incidence of bacterial wilt disease and fruit cracking in low altitude. The research was conducted at the IPB Experimental Field in Leuwikopo, Dramaga, Bogor, from December 2015 to April 2016. The experiment used a randomized complete block design with three replications. The material consisted of 15 M4 genotypes and two controls (Berlian and Kefaminano 6). The results showed that genotype of M4/495 Lombok 1-9-2 (U2) has high  productivity. Genotype M4/990 Lombok 1-5-1 (U1) has  high weight  per fruit and resistant to fruit cracking. Genotype M4/495 GL2-8-10 (U2), M4/495 Kemir 1- 4-7 (U3), M4/495 STBGL 1-2-3 (U1) M4/990 Lombok 1-5-1 (U1), and  M4/495 STBGL 1-2-9 (U1) have the lowest incidence of bacterial wilt (0.00%). Two genotypes which have high productivity and resistant to fruit cracking are M4/495 Lombok 1-9-2 (U2) and M4/990 Lombok 1-5-1 (U1), and to be evaluated in a preliminary yield trial.<br /><br />Keywords: bacterial wilt, fruit cracking, genotype, yield<br /><br /></em></p>

scholarly journals Effect of Zinc and Boron on Growth and Yield of Okra (Abelmoschus esculentus L.)

2020 ◽  
pp. 41-47
Author(s):  
Nusrat Jahan ◽  
Md. Ashabul Hoque ◽  
Md. Rasal-Monir ◽  
Sumya Fatima ◽  
Mohammad Nurul Islam ◽  
...  
Keyword(s):  
Dry Matter ◽  
Block Design ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Growth And Yield ◽  
Area Index ◽  
Spad Value ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
Fruit Diameter

The study was carried out to find out the effect of zinc (Zn) and boron (B) on growth and yield of okra (BARI Dherosh 1). The experiment was laid out in Randomized Complete Block Design (RCBD) with three replications. The treatments of the experiment were, T0 (without Zn or B), T1 (20 kg Zn ha-1), T2 (30 kg Zn ha-1), T3 (10 kg B ha-1), T4 (20 kg B ha-1), T5 (20 kg Zn ha-1 + 10 kg B ha-1), T6 (20 kg Zn ha-1 + 20 kg B ha-1), T7 (30 kg Zn ha-1 + 10 kg B ha-1) and T8 (30 kg Zn ha-1 + 20 kg B ha-1) were undertaken to evaluate the best results of the study. The highest plant height was found in T8 (30 kg Zn ha-1 + 20 kg B ha-1) but the highest number of leaves plant-1 was recorded from T7 (30 kg Zn ha-1 + 10 kg B ha-1). On the other hand, the maximum leaf area index, SPAD value, mean fruit weight, fruit length, fruit diameter, fruit dry matter (%), number of fruits plant-1, fresh fruit weight plant-1 , fruit yield plot-1 and fruit yield ha-1 were found in T7 (30 kg Zn ha-1 + 10 kg B ha-1), while the control (T0) showed lowest performance for the respected parameters. It is strongly concluded that 30 kg Zn ha-1 with 10 kg B ha-1 combination may be helpful for okra cultivation in the field level to increase okra production.

scholarly journals Response Of Maize Varieties To Sowing Dates In Inner Terai Region, Dang, Nepal

2019 ◽  
Vol 2 (2) ◽  
pp. 27-31
Author(s):  
Pukar Khanal ◽  
Rupak Karn ◽  
Pratibha Budhathoki Chhetri ◽  
Samita Karki ◽  
Shrawan Kumar Sah
Keyword(s):  
Unit Area ◽  
Block Design ◽  
Climatic Conditions ◽  
Spring Season ◽  
Thousand Grain Weight ◽  
Maize Hybrids ◽  
Sowing Dates ◽  
Maize Varieties ◽  
Randomized Complete Block Design ◽  
Hybrid Maize

AbstractSowing dates and varieties affect the productivity of maize. A field experiment was conducted to find out the response of maize hybrids to sowing dates on growth and productivity of maize in spring season at Lamahi, Dang in 2019. The experiment was laid out in two factor factorial Randomized Complete Block Design with four replications. The treatment consisted of combination of three different sowing dates (February 1, February12 and February 23) and two maize varieties (Arun-2 i.e. OPV and hybrid Bioseed-9220).The result revealed that earlier planting on February 1 produced the highest yield (8265 Kg ha-1) which was significantly superior than latter planting of February 12(6099 kg ha-1)and February 23 (5934 kg ha-1).The higher yield in earlier planting was due to significantly higher no of kernel per ear, non-significant but higher number of cob per unit area, thousand grain weight. Similarly, Bioseed 9220 produced higher yield (7798 kg ha-1) compared to Arun-2 (5,734 kg ha-1). The higher yield of hybrid Bioseed 9220 was because of higher number of cob per unit area harvested and more number of kernel per cob. Therefore, earlier planting with hybrid maize is recommended in spring season of Dang and locations with similar climatic conditions for higher productivity of maize.

Foliage applied zinc improves growth, yield and oil contents of sunflower hybrids (Helianthus annus L.)

2019 ◽  
Vol 1 (2) ◽  
pp. 63-69
Author(s):  
Shabir Hussain ◽  
Hakoomat Ali ◽  
Muhammad Ehmer ◽  
Waqas Ahmad
Keyword(s):  
Leaf Area ◽  
Plant Height ◽  
Foliar Application ◽  
Block Design ◽  
Growth Yield ◽  
Research Area ◽  
Stem Diameter ◽  
Head Diameter ◽  
Helianthus Annus ◽  
Zinc Levels

The research was conducted at Research Area of Department of Agronomy, Bahauddin Zakariya University Multan, during the spring season, 2016. The study aimed to evaluate the influence of foliage applied zinc on growth, yield and oil contents of hybrid sunflower. Experimental treatments comprise of two sunflower hybrids viz. H1= Hysun-33 and H2= S-278 and three zinc levels viz. T1= Control (no application), T2=1% ZnSO4 and T3 = 2% ZnSO4. The experiment was laid out in Randomized Complete Block Design (RCBD) with split plot arrangement and repeated thrice. Data regarding growth, yield and oil contents were collected by using standard procedures. Results revealed that sunflower hybrid Hysun-33 gained maximum plant height (210.67cm), stem diameter (2.427), head diameter (15.533) achene number (852), achene yield (189.19 t ha-1), leaf area (789.56cm2) and oil contents (40.423%) followed by sunflower hybrid S-278. Zinc application significantly improved the yield and oil contents. In this regard, maximum plant height (194.67 cm), stem diameter (2.718cm), head diameter (14.633 cm), achene number (842.17), achene yield (194.56 t ha-1), leaf area (782.5cm2) and oil contents (40.12%) from 2% foliar application of zinc followed by 1% foliar application of zinc. Whereas, minimum plant height, stem diameter, head diameter, achene number, achene yield, leaf area and oil contents were recorded from control where no zinc was applied. Interaction of sunflower hybrids with zinc was also significant. In this contest, maximum plant height (231.67cm), stem diameter (2.917cm), head diameter (15.7cm), achene number (925.0), achene yield (205.89 t ha-1), leaf area (801.33cm2) and oil contents (41.65%) were recorded from sunflower hybrid Hysun-33 with 2% application of zinc followed by sunflower hybrid S-278 with 1% zinc foliar application. In Conclusion, sunflower hybrid along with the 2% foliar application of zinc is the most suitable combination to achieve higher yield and oil contents.

scholarly journals Verification of disease management technology on lentil against Stemphylium blight at farmer’s field in Nepal

2018 ◽  
Vol 1 (1) ◽  
pp. 51-61
Author(s):  
Subash Subedi ◽  
Sarswati Neupane
Keyword(s):  
Lens Culinaris ◽  
Block Design ◽  
Cost Ratio ◽  
Row Spacing ◽  
Benefit Cost Ratio ◽  
Plot Size ◽  
Management Technology ◽  
Randomized Complete Block Design ◽  
Stemphylium Blight ◽  
Benefit Cost

Technologies generated from lentil (Lens culinaris Medik) stemphylium blight (Stemphylium botryosum Walr) management experiments were verified at farmers field of 5 districts viz., Chitawan, Rautahat, Dang, Parsa and Banke during two winter seasons of 2013-2014 and 2014- 2015. The experiment was laid out in randomized complete block design with factorial arrangement of treatments and replicated 4 times. The plot size was 340 m2 (1 Kattha) with 25 cm row to row spacing. There were altogether 3 factors of the experiment i.e. year (2013-2014 and 2014-2015), location (5 districts) and package of practice (improved and farmers practice). The higher crop yield (1142.50 kg/ha) with lower disease index (34.95%) and higher benefit cost ratio of 2.42 were recorded in the farmers field of Banke district following seed rate (30 kg/ha), 8 hour primed improved variety (Black lentil), fertilizer doze of (20:40:20 NPK kg/ha+ 1 kg/ha B basal doze) and subsequent 3 sprays of Dithane M-45 @ 2.5 g/l of water at 10 days interval.

scholarly journals Plot size for evaluation of Arabica coffee yield

2019 ◽  
Vol 41 ◽  
pp. e42712
Author(s):  
Bráulio Fabiano Xavier de Moraes ◽  
Fernando Henrique Ribeiro Barroso Toledo ◽  
Kaio Olímpio das Graças Dias ◽  
Vinícius Teixeira Andrade ◽  
Daniel Furtado Ferreira ◽  
...  
Keyword(s):  
Block Design ◽  
Basic Unit ◽  
Parameter Estimates ◽  
Coffee Production ◽  
Resampling Methods ◽  
Arabica Coffee ◽  
Plot Size ◽  
Coffee Yield ◽  
Randomized Complete Block Design ◽  
Set Up

In most cases, in genetic breeding of Arabica coffee, plot size is defined in an empirical manner. It is often based only on the experience of the breeders and the availability of resources, potentially leading to a reduction in precision. Therefore, the aim of this study was to estimate the size of the experimental plot for evaluation of coffee yield. We evaluated two experiments for validation of cultivars with 12 treatments set up in a randomized complete block design with three replicates and plots composed of 50 plants. Each plant was considered as a basic unit. Estimates of ideal plot size were made by maximum curvature of the coefficient of variation, linear-plateau segmented model and by the resampling methods. We discussed the variations in the parameter estimates for different plot sizes. Divergence was seen among the plot sizes estimated by the different methodologies. Increasing the number of plants per plot led to a higher experimental precision to the point that the increase was no longer significant. The plot size recommended for evaluating coffee production is from seven to 19 plants.

scholarly journals Performance evaluation of early maize genotypes in far western hills of Nepal

2015 ◽  
Vol 1 (1) ◽  
pp. 106-111
Author(s):  
Hari Kumar Prasai ◽  
Ujjawal Kumar Singh Kushwaha ◽  
Bishnu Prasad Joshi ◽  
Jiban Shrestha
Keyword(s):  
Performance Evaluation ◽  
Statistical Analysis ◽  
Research And Development ◽  
Agricultural Research ◽  
Block Design ◽  
Initial Evaluation ◽  
Research Station ◽  
Maize Genotypes ◽  
Randomized Complete Block Design ◽  
Evaluation Trial

Initial evaluation trial of maize (early) genotypes was carried out at Regional Agricultural Research Station, Doti, Nepal in 2013 and 2014. Total fourteen and fifteen genotypes of early maize were included in initial evaluation experiment of the year 2013 and 2014 respectively. The experiment was laid out in randomized complete block design (RCBD) with three replications in each year. Out of the tested genotypes, SO3TEY/LN, ZM 423 and SO3TEY-FM (ER) identified as promising from statistical analysis over year. All the tested characters were found statistically significant. Similarly, the coordinated varietal trial of maize (early) was also carried out in the same station at 2013 and 2014. Total fourteen genotypes in 2013 and fifteen genotypes in 2015 of maize (early) were included in the experiment. The RCB design was applied and the experiment was replicated three times in every year. ZM 627 and ZM 621/Pool -15 genotypes identified as superior next to Arun-2 from the analysis of two year data. All the tested traits were found statistically significant in over year analysis.Journal of Maize Research and Development (2015) 1(1):106-111DOI: http://dx.doi.org/10.5281/zenodo.34291

Sign in / Sign up

Export Citation Format

Share Document