scholarly journals A mini review: Optimal dye removal by fenton process catalysed with waste materials

2020 ◽  
Author(s):  
Aleksandra Kulić Mandić ◽  
◽  
Milena Bečelić-Tomin ◽  
Đurđa Kerkez ◽  
Gordana Pucar Milidrag ◽  
...  
Keyword(s):  
Value Chain ◽  
Fenton Reaction ◽  
Dye Removal ◽  
Ph Value ◽  
Bottom Ash ◽  
Point Of View ◽  
Industrial Wastes ◽  
Waste Materials ◽  
Wide Range ◽  
Disposal Cost

Large quantities of solid waste from different industries are commonly disposed in landfills, where can generate wide range of environmental problems. Therefore, the aim of this paper is to give insight on the usage of various waste materials as oxidation catalysts in different Fenton processes for dye removal. In that manner the circular value chain of these materials will be reinforced, obtaining disposal cost reduction and further value addition. Some of industrial wastes (fly ash, electric arc furnace dust, red mud, coal bottom ash, activated carbon from biomass, etc.) that have been used to catalyse Fenton reaction in various researches are reviewed from optimization point of view. Both types of optimization, one-factor-at-a-time (OFAT) and response surface methodology (RSM) are investigated. The study revealed that factors as catalyst concentration, pH value, hydrogen peroxide concentration, dye concentration and reaction time are main factors that influence final Fenton capacity as oxidation process catalysed with reviewed waste materials.

Catalytic Degradation of Methyl Blue in Wastewater by Hematite

2012 ◽  
Vol 518-523 ◽  
pp. 2414-2417 ◽  
Author(s):  
Zhuan Nian Liu ◽  
Xiao Xue Zhang ◽  
Lin Zhao
Keyword(s):  
Reaction Time ◽  
Heterogeneous Catalyst ◽  
Fenton Reaction ◽  
Ph Value ◽  
Reaction System ◽  
Catalytic Degradation ◽  
Operating Conditions ◽  
Methyl Blue ◽  
Orthogonal Experiments ◽  
Wide Range

In this paper, catalytic degradation of simulated methyl blue in wastewater was investigated using hematite as heterogeneous catalyst in like-Fenton reaction. Through single factor experiments, the effects of the H2O2 dosage, the hematite dosage, initial pH value and reaction time on methyl blue catalytic degradation were studied. The results showed that as the amount of hematite, H2O2 dosage and reaction time increases, the degradation increases, more than a certain degradation value , the trend decreases and tends to stabilize. The optimal operating conditions determined by orthogonal experiments are as following: hematite dosage was 3g/L, H2O2 dosage was 3mL/L, and 4h at pH=9.The Fenton reaction system of hematite as heterogeneous catalyst has a wide range of pH, in the range of 3 to 11 have better removal effect, and generally more than 85%.

scholarly journals Physical, Mechanical and Durability Performance of Pastes Containing Carbon Fiber

2020 ◽  
Author(s):  
Mohamad Atiyeh ◽  
Ertug Aydin
Keyword(s):  
Carbon Fiber ◽  
Volume Fraction ◽  
Bottom Ash ◽  
Physical And Mechanical Properties ◽  
Vital Role ◽  
Industrial Wastes ◽  
Fiber Volume ◽  
Volume Percentage ◽  
Wide Range ◽  
Marble Dust

The damage caused by global warming is rapidly increasing, and its adverse effects become more evident with each passing day. Although it is known that the use of alternative binder materials in concrete would decrease this negative effect, reluctance to new composites continues. Waste use plays a vital role in sustainability studies. In this study, pure cement paste was prepared and enriched with carbon fiber. This study investigated the wide range of volume fraction of carbon fiber in cement-based composites. Two different industrial wastes, marble dust, and bottom ash were chosen and mixed with cement and four different (0.3%, 0.75%, 1.5%, and 2.5%) carbon fiber volume fractions. Based on physical, mechanical, and durability tests at 7, 28, and 56-days of curing, the composites were resistant to sulfate and seawater attack. The 0.75% carbon fiber addition seems to be an optimum volume percentage beyond which both physical and mechanical properties were adversely affected. The composites with 0.75% carbon fiber have reached 48.4 MPa and 47.2 MPa at 56-days of curing for marble dust and bottom ash mixture groups, respectively.

scholarly journals Propionic Acid

2020 ◽  
Vol 58 (2) ◽  
pp. 115-127
Author(s):  
Vahid Ranaei ◽  
Zahra Pilevar ◽  
Amin Mousavi Khaneghah ◽  
Hedayat Hosseini
Keyword(s):  
Propionic Acid ◽  
Acid Production ◽  
Ph Value ◽  
Culture Conditions ◽  
Point Of View ◽  
The Past ◽  
Whole Wheat ◽  
Wide Range ◽  
Growth Production ◽  
Propionic Acid Production

During the past years, there has been a growing interest in the bioproduction of propionic acid by Propionibacterium. One of the major limitations of the existing models lies in their low productivity yield. Hence, many strategies have been proposed in order to circumvent this obstacle. This article provides a comprehensive synthesis and review of important biotechnological aspects of propionic acid production as a common ingredient in food and biotechnology industries. We first discuss some of the most important production processes, mainly focusing on biological production. Then, we provide a summary of important propionic acid producers, including Propionibacterium freudenreichii and Propionibacterium acidipropionici, as well as a wide range of reported growth/production media. Furthermore, we describe bioprocess variables that can have impact on the production yield. Finally, we propose methods for the extraction and analysis of propionic acid and put forward strategies for overcoming the limitations of competitive microbial production from the economical point of view. Several factors influence the propionic acid concentration and productivity such as culture conditions, type and bioreactor scale; however, the pH value and temperature are the most important ones. Given that there are many reports about propionic acid production from glucose, whey permeate, glycerol, lactic acid, hemicelluloses, hydrolyzed corn meal, lactose, sugarcane molasses and enzymatically hydrolyzed whole wheat flour, only few review articles evaluate biotechnological aspects, i.e. bioprocess variables.

Colorimetric research of self-luminous objects in software and hardware environments by the method of multidimensional scales implementation

2020 ◽  
pp. 43-50
Author(s):  
Yauheniya N. Saukova
Keyword(s):  
Metrological Traceability ◽  
Point Of View ◽  
Intermediate Precision ◽  
Technical Vision ◽  
Wide Range ◽  
Chromaticity Coordinates ◽  
Unity Of Measurements ◽  
Software And Hardware ◽  
Luminous Objects ◽  
Reference Samples

It is shown that the issues of metrological traceability for extended self-luminous objects with a wide range of brightness have not yet been resolved, since the rank scales of embedded systems are used for processing digital images. For such scales, there is no “fixed” unit, which does not allow you to get reliable results and ensure the unity of measurements. An experiment is described to evaluate the accuracy of determining the intensity (coordinates) of the color of self-luminous objects. In terms of repeatability and intermediate precision compared to the reference measurement method, the color and chromaticity coordinates of self-luminous objects (reference samples) were determined by their multiple digital registration using technical vision systems. The possibilities of the developed methodology for colorimetric studies in hardware and software environments from the point of view of constructing a multidimensional conditional scale are determined.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

IMPROVEMENT OF INNOVATIVE ACTIVITY OF THE ENTERPRISE

2017 ◽  
Author(s):  
Nataliya Stoyanets ◽  
◽  
Mathias Onuh Aboyi ◽  
Keyword(s):  
Value Chain ◽  
Net Present Value ◽  
Successful Implementation ◽  
Innovative Development ◽  
Technological Equipment ◽  
Alliance Partner ◽  
Innovation Potential ◽  
Wide Range ◽  
Technological Platform ◽  
The Cost

The article defines that for the successful implementation of an innovative project and the introduction of a new product into production it is necessary to use advanced technologies and modern software, which is an integral part of successful innovation by taking into account the life cycle of innovations. It is proposed to consider the general potential of the enterprise through its main components, namely: production and technological, scientific and technical, financial and economic, personnel and actual innovation potential. Base for the introduction of technological innovations LLC "ALLIANCE- PARTNER", which provides a wide range of support and consulting services, services in the employment market, tourism, insurance, translation and more. To form a model of innovative development of the enterprise, it is advisable to establish the following key aspects: the system of value creation through the model of cooperation with partners and suppliers; creating a value chain; technological platform; infrastructure, determine the cost of supply, the cost of activities for customers and for the enterprise as a whole. The system of factors of influence on formation of model of strategic innovative development of the enterprise is offered. The expediency of the cost of the complex of technological equipment, which is 6800.0 thousand UAH, is economically calculated. Given the fact that the company plans to receive funds under the program of socio-economic development of Sumy region, the evaluation of the effectiveness of the innovation project, the purchase of technological equipment, it is determined that the payback period of the project is 3 years 10 months. In terms of net present value (NPV), the project under study is profitable. The project profitability index (PI) meets the requirements for a positive decision on project implementation> 1.0. The internal rate of return of the project (IRR) also has a positive value of 22% because it exceeds the discount rate.

Academy Journal No.3(15), 2019/ Chief Editors Susan Belih & Jaak Järv /OEAPS Inc.(Open European Academy of Public Sciences) & Estonian Academy of Sciences. Tallinn, Estonia. 09.03.2019: OEAPS Inc., 2019. - 88 P. ISBN: 9781797440507 ISSN 1736-7530 (electronic)

2019 ◽  
Author(s):  
Inc. OEAPS
Keyword(s):  
Service Sector ◽  
Point Of View ◽  
Scientific Quality ◽  
Final Decision ◽  
Research Subjects ◽  
Wide Range ◽  
Peer Reviewers ◽  
Verification Process ◽  
Scientific Research Articles ◽  
Monthly Journal

"Academy Journal" is an international, peer-reviewed monthly journal. It is devoted to the publication of original scientific research articles dealing with various academic disciplines.Articles that may be of interest to a wide range of researchers are welcome, and not limited to those who work on specific research subjects."Academy Journal" has an open archive, according to which published articles are available immediately after publication, excluding embargoes.Expert reviewThere is one blind verification process in the journal. All articles will be initially evaluated by the editor for compliance with the journal. Manuscripts that are considered appropriate are then usually sent to at least two independent peer reviewers to assess the scientific quality of the article. The editor is responsible for the final decision on whether to accept or reject the article. The editor's decision is final.The main criterion used in assessing the manuscript submitted to the journal is: uniqueness or innovation in the work from the point of view of the methodology being developed and / or its application to a problem of particular importance in the public sector or service sector and / or the setting in which the efforts, for example, in the developing region of the world. That is, the very model / methodology, application and context of problems, at least one of them must be unique and important.Additional criteria considered in the consideration of the submitted document are its accuracy, organization / presentation (ie logical flow) and recording quality.

Theory and Practice of Quality Management in Lifelong Learning at a Public University

2018 ◽  
Vol 8 (2) ◽  
pp. 49-73
Author(s):  
Petr Adamec
Keyword(s):  
Lifelong Learning ◽  
Public University ◽  
Further Education ◽  
Point Of View ◽  
Theory And Practice ◽  
University Policy ◽  
Higher Education Act ◽  
Wide Range ◽  
Learning Programs ◽  
Education Act

The core issue of this paper is a quality in the lifelong learning. The aim of the contribution is to describe the area, level and dimensions of quality in a wide range of lifelong learning programs, respectively of further education, which are realized in the sense of § 60 and 60a of the Higher Education Act. The content of the paper also focuses on the theoretical and practical starting points of the quality phenomenon, both from the historical point of view and especially from the perspective of the current focus and concept of university policy in the European and Czech region. The paper also presents the results of a survey focusing on approaches to the quality assurance systems in the concept of components at selected public university.

Configurations to Superior Environmental Innovation Strategy: A Both–And Approach

2021 ◽  
pp. 108602662110316
Author(s):  
Tiziana Russo-Spena ◽  
Nadia Di Paola ◽  
Aidan O’Driscoll
Keyword(s):  
Climate Change ◽  
Value Chain ◽  
Critical Role ◽  
Well Being ◽  
Point Of View ◽  
Future Generations ◽  
Innovation Strategy ◽  
Environmental Innovation ◽  
Data Set

An effective climate change action involves the critical role that companies must play in assuring the long-term human and social well-being of future generations. In our study, we offer a more holistic, inclusive, both–and approach to the challenge of environmental innovation (EI) that uses a novel methodology to identify relevant configurations for firms engaging in a superior EI strategy. A conceptual framework is proposed that identifies six sets of driving characteristics of EI and two sets of beneficial outcomes, all inherently tensional. Our analysis utilizes a complementary rather than an oppositional point of view. A data set of 65 companies in the ICT value chain is analyzed via fuzzy-set comparative analysis (fsQCA) and a post-QCA procedure. The results reveal that achieving a superior EI strategy is possible in several scenarios. Specifically, after close examination, two main configuration groups emerge, referred to as technological environmental innovators and organizational environmental innovators.

Sign in / Sign up

Export Citation Format

Share Document