scholarly journals RANCANG BANGUN KONTRUKSI DAN SISTEM GERAK SUMBU PADA MESIN FUSED DEPOSITION MODELLING

POROS ◽  
2017 ◽  
Vol 14 (2) ◽  
pp. 99
Author(s):  
Jeffrey Jeffrey ◽  
Didi Widya Utama ◽  
Gatot Soeharsono
Keyword(s):  
Modeling And Simulation ◽  
3D Modeling ◽  
Fused Deposition Modeling ◽  
Physical Models ◽  
Additive Manufacture ◽  
Fused Deposition Modelling ◽  
Design Tools ◽  
Fused Deposition ◽  
3D Printers ◽  
Deposition Modeling

Abstract: Fused Deposition Modelling (FDM) is a technology additive manufacture for modelling, prototyping, and production. This technology is one of the techniques used for 3D printers. Our focus is on studying, design machines fused deposition with 3D modeling and simulation with autodesk inventor and other design tools. Design is done by simulating the strength of the construction and then determine the components needed. We are making fused deposition modeling is intended as a prototype in order to understand how it works and how to innovate in the development of fused deposition modeling. The results of the design in the form of a fused depositon modeling that is able to create physical models 

Effect of Printing Parameters on the Mechanical Properties of Parts Fabricated with Open-Source 3D Printers in PLA by Fused Deposition Modeling

2020 ◽  
Vol 22 (4) ◽  
pp. 895-908
Author(s):  
M. Ouhsti ◽  
B. El Haddadi ◽  
S. Belhouideg
Keyword(s):  
Mechanical Properties ◽  
Polylactic Acid ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Fused Deposition Modelling ◽  
Fused Deposition ◽  
3D Printers ◽  
Deposition Modeling ◽  
Printed Materials ◽  
Printing Parameters

Abstract3D polymer-based printers have become easily accessible to the public. Usually, the technology used by these 3D printers is Fused Deposition Modelling (FDM). The majority of these 3D printers mainly use acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA) to fabricate 3D objects. In order for the printed parts to be useful for specific applications, the mechanical properties of the printed parts must be known. The aim of this study is to determine the tensile strength and elastic modulus of printed materials in polylactic acid (PLA) according to three important printing parameters such as deposition angle, extruder temperature and printing speed. The central composite design (CCD) was used to reduce the number of tensile test experiments. The obtained results show that the mechanical properties of printed parts depend on printing parameters. Empirical models relating response and process parameters are developed. The analysis of variance (ANOVA) was used to test the validity of models relating response and printing parameters. The optimal printing parameters are determined for the desired mechanical properties.

scholarly journals A 3D Printer Guide for the Development and Application of Electrochemical Cells and Devices

2021 ◽  
Vol 9 ◽  
Author(s):  
Ana Luisa Silva ◽  
Gabriel Maia da Silva Salvador ◽  
Sílvia V. F. Castro ◽  
Nakédia M. F. Carvalho ◽  
Rodrigo A. A. Munoz
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Three Dimensions ◽  
Raw Material ◽  
Fused Deposition Modelling ◽  
Electrochemical Cells ◽  
Fused Deposition ◽  
3D Printers ◽  
Deposition Modeling ◽  
Near Future

3D printing is a type of additive manufacturing (AM), a technology that is on the rise and works by building parts in three dimensions by the deposit of raw material layer upon layer. In this review, we explore the use of 3D printers to prototype electrochemical cells and devices for various applications within chemistry. Recent publications reporting the use of Fused Deposition Modelling (fused deposition modeling®) technique will be mostly covered, besides papers about the application of other different types of 3D printing, highlighting the advances in the technology for promising applications in the near future. Different from the previous reviews in the area that focused on 3D printing for electrochemical applications, this review also aims to disseminate the benefits of using 3D printers for research at different levels as well as to guide researchers who want to start using this technology in their research laboratories. Moreover, we show the different designs already explored by different research groups illustrating the myriad of possibilities enabled by 3D printing.

scholarly journals Accuracy of three-dimensional dental resin models created by fused deposition modeling, stereolithography, and Polyjet prototype technologies: A comparative study

2018 ◽  
Vol 88 (3) ◽  
pp. 363-369 ◽  
Author(s):  
Raymund E. Rebong ◽  
Kelton T. Stewart ◽  
Achint Utreja ◽  
Ahmed A. Ghoneima
Keyword(s):  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Vertical Plane ◽  
Physical Models ◽  
Dental Resin ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
School Of Dentistry ◽  
Plaster Models ◽  
Plaster Casts

ABSTRACT Objectives: The aim of this study was to assess the dimensional accuracy of fused deposition modeling (FDM)–, Polyjet-, and stereolithography (SLA)–produced models by comparing them to traditional plaster casts. Materials and A total of 12 maxillary and mandibular posttreatment orthodontic plaster casts were selected from the archives of the Orthodontic Department at the Indiana University School of Dentistry. Plaster models were scanned, saved as stereolithography files, and printed as physical models using three different three-dimensional (3D) printers: Makerbot Replicator (FDM), 3D Systems SLA 6000 (SLA), and Objet Eden500V (Polyjet). A digital caliper was used to obtain measurements on the original plaster models as well as on the printed resin models.Methods: Results: Comparison between the 3D printed models and the plaster casts showed no statistically significant differences in most of the parameters. However, FDM was significantly higher on average than were plaster casts in maxillary left mixed plane (MxL-MP) and mandibular intermolar width (Md-IMW). Polyjet was significantly higher on average than were plaster casts in maxillary intercanine width (Mx-ICW), mandibular intercanine width (Md-ICW), and mandibular left mixed plane (MdL-MP). Polyjet was significantly lower on average than were plaster casts in maxillary right vertical plane (MxR-vertical), maxillary left vertical plane (MxL-vertical), mandibular right anteroposterior plane (MdR-AP), mandibular right vertical plane (MdR-vertical), and mandibular left vertical plane (MdL-vertical). SLA was significantly higher on average than were plaster casts in MxL-MP, Md-ICW, and overbite. SLA was significantly lower on average than were plaster casts in MdR-vertical and MdL-vertical. Conclusions: Dental models reconstructed by FDM technology had the fewest dimensional measurement differences compared to plaster models.

Localised Pre-Heating to Improve Inter-Layer Delamination Strength in Fused Deposition Modelling

2019 ◽  
Author(s):  
Andrew Aitchison ◽  
Qing Wang
Keyword(s):  
Tensile Strength ◽  
Thermal Energy ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Additive Manufacture ◽  
Fused Deposition Modelling ◽  
Print Quality ◽  
Air Gaps ◽  
Fused Deposition ◽  
Air Temperatures

Abstract Additive manufacture, specifically Fused Deposition Modeling (FDM), is an advancing manufacture method opening up new possibilities in design previously impossible to machine, in a relatively affordable way. However, its use in functional products is limited due to anisotropic strength and reduced strength from injection molded components. This paper aims to increase the tensile strength of Acrylonitrile Butadiene Styrene (ABS) in the weakest direction (Z axis), where poor interlayer fusion and air gaps between extruded trails reduce strength. Extra thermal energy was applied to the top surface layer during the printing process (through hot air) to encourage more polymer chain diffusion across the boundary, and spreading out to fill air gaps. Multiple tensile test samples were printed at a variety of heat levels. The ultimate tensile strength σuts was plotted against these temperatures and a weak positive correlation was found. However, only air temperatures above 81°C increased strength past the control to a maximum of 1.4MPa. Heat application has proven to increase tensile strength, but needs to be applied with a more precise method, to the boundary interface, to allow greater thermal energy transfer without sacrificing print quality.

scholarly journals PENENTUAN SETTING OPTIMAL MESIN 3D PRINTER BERBASIS FUSED DEPOSITION MODELING MENGGUNAKAN METODE TAGUCHI

2018 ◽  
Vol 4 (2) ◽  
Author(s):  
Anggit Prakasa ◽  
Setya Permana Sutisna ◽  
Anton Royanto Ahmad
Keyword(s):  
Experimental Design ◽  
Taguchi Method ◽  
Fused Deposition Modeling ◽  
Dimensional Accuracy ◽  
High Accuracy ◽  
3D Printer ◽  
Fused Deposition ◽  
3D Printers ◽  
Optimal Setting ◽  
Deposition Modeling

<p>The 3D printers process is applied to create prototype components, but at the last 3D Printers are often applied as last products. So, high accuracy is required in this case. In this research will find the optimal<br />setting of the dimensional accuracy 3D printers based fused deposition modeling. The method used is<br />the Taguchi method, the reason for using this method its efficiency, this is because the Orthogonal<br />Array matrix requires less number of experiments than the classical experimental design. Analysis of<br />Variance is also needed in this method to see the factors that significantly influence the response<br />variable. The results of this study indicate that the factors that significantly influence is printspeed by<br />contributing 53.08%, flowrate contributes 16.4%, and temperature heater block contributes 3.85% and<br />optimal setting is temperature heater block 190º, print speed 60mm/s and flowrate 6.28 mm3/s. (A1,<br />C3 dan D2).</p>

Development of New Composite Materials for Rapid Tooling Using Fused Deposition Modelling

2014 ◽  
Vol 808 ◽  
pp. 103-108 ◽  
Author(s):  
Harish Kumar Garg ◽  
Rupinder Singh
Keyword(s):  
Rapid Prototyping ◽  
Fused Deposition Modeling ◽  
Research Work ◽  
Rapid Tooling ◽  
Industrial Applications ◽  
Fused Deposition Modelling ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
The Impact ◽  
Feedstock Material

The impact of Rapid Prototyping (RP) on the future engineering and manufacturing will undoubtedly be widespread .It has variety of applications which include the manufacture of prototypes know as rapid prototyping, tool cores and cavities know as rapid tooling and in the manufacture of patterns for a range of casting processes known as rapid casting. In the proposed research work, fused deposition modeling (FDM) technique of RP will be used for development of a tool for direct application using Rapid tooling. The research work includes development of new hybrid feedstock filament of Fe – Nylon6 composite material for the FDM machine which will be suitable for the machine in its existing setup. The feedstock filament will have the desired mechanical thermal and rheological properties as desired for Rapid Tooling applications. The proposed feedstock material will be ferromagnetic in nature and can find wide application in industrial applications.

scholarly journals Biodegradable Poly(Lactic Acid) Nanocomposites for Fused Deposition Modeling 3D Printing

Nanomaterials ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 2567
Author(s):  
Madison Bardot ◽  
Michael D. Schulz
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Ecological Crisis ◽  
Poly Lactic Acid ◽  
Fused Deposition Modelling ◽  
Fused Deposition ◽  
Biodegradable Poly ◽  
Deposition Modeling

3D printing by fused deposition modelling (FDM) enables rapid prototyping and fabrication of parts with complex geometries. Unfortunately, most materials suitable for FDM 3D printing are non-degradable, petroleum-based polymers. The current ecological crisis caused by plastic waste has produced great interest in biodegradable materials for many applications, including 3D printing. Poly(lactic acid) (PLA), in particular, has been extensively investigated for FDM applications. However, most biodegradable polymers, including PLA, have insufficient mechanical properties for many applications. One approach to overcoming this challenge is to introduce additives that enhance the mechanical properties of PLA while maintaining FDM 3D printability. This review focuses on PLA-based nanocomposites with cellulose, metal-based nanoparticles, continuous fibers, carbon-based nanoparticles, or other additives. These additives impact both the physical properties and printability of the resulting nanocomposites. We also detail the optimal conditions for using these materials in FDM 3D printing. These approaches demonstrate the promise of developing nanocomposites that are both biodegradable and mechanically robust.

scholarly journals Mesh-type 3D Printing of Human Organs and Tumors: Fast, Cost-Effective, and Personalized Anatomic Modeling

2020 ◽  
Author(s):  
Jungirl Seok ◽  
Sungmin Yoon ◽  
Chang Hwan Ryu ◽  
Junsun Ryu ◽  
Seok-ki Kim ◽  
...  
Keyword(s):  
3D Printing ◽  
3D Modeling ◽  
Fused Deposition Modeling ◽  
Cost Effective ◽  
Tumor Location ◽  
Surgical Specimen ◽  
Personalized Care ◽  
Fused Deposition ◽  
Mesh Work ◽  
Deposition Modeling

OBJECTIVE: Although 3D-printed anatomic models are not new to medicine, the high costs and lengthy production times entailed have limited their application. Our goal was developing a new and less costly 3D modeling method to depict organ-tumor relations at faster printing speeds. METHODS: We have devised a method of 3D modeling using DICOM images. Coordinates are extracted at a specified interval, connecting them to create mesh-work replicas. Adjacent constructs are depicted by density variations, showing anatomic targets (ie, tumors) in contrasting color. RESULTS: An array of organ solid-tumor models were printed via Fused Deposition Modeling 3D printer at significantly less cost ($0.05/cm3) and time expenditure (1.73 min/cm3; both, p&lt;.001). Printed models helped promote visual appreciation of organ-tumor anatomy and adjacent tissues. Our mesh-work 3D thyroidal prototype reproduced glangular size/contour and tumor location, readily approximating the surgical specimen. CONCLUSIONS: This newly devised mesh-type 3D printing method may facilitate anatomic modeling for personalized care and improve patient awareness during informed surgical consent.

The Mechanical Characteristics of 3D Printed Parts According to the Build Orientation

2014 ◽  
Vol 474 ◽  
pp. 381-386 ◽  
Author(s):  
Petr Zelený ◽  
Jiří Šafka ◽  
Irina Elkina
Keyword(s):  
Rapid Prototyping ◽  
Fused Deposition Modeling ◽  
Mechanical Characteristics ◽  
Tensile Tests ◽  
Physical Models ◽  
Build Orientation ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Component Element ◽  
3D Printed

This article is focused on a production of mechanically resistant physical models using Rapid Prototyping technology. There are two tested materials, ABS is the first build material and ABS-like is the second build material with similar properties. The article describes the production of a testing component - element for tensile tests by two RP technologies. The first technology is FDM (Fused Deposition Modeling) and the second PolyJet Matrix. Further the article describes the description and evaluation of the tensile tests.

Sign in / Sign up

Export Citation Format

Share Document