scholarly journals Enhancement of Spectrum Sensing Performance via Cooperative Cognitive Radio ‎Networks at Low SNR

2021 ◽  
pp. 2474-2485
Author(s):  
Kotb A. Kotb ◽  
Ahmed S. Shalaby ◽  
Ahmed Yahya
Keyword(s):  
Signal To Noise Ratio ◽  
Total Error ◽  
Decision Fusion ◽  
Operating Conditions ◽  
Cognitive Network ◽  
Low Snr ◽  
Cooperative Cognitive Radio Networks ◽  
Total Error Rate ◽  
Hard Decision ◽  
Sensing Performance

     The inefficient use of spectrum is the key subject to overcome the upcoming spectrum crunch issue. This paper presents a study of performance of cooperative cognitive network via hard combining of decision fusion schemes. Simulation results presented different cooperative hard decision fusion schemes for cognitive network. The hard-decision fusion schemes provided different discriminations for detection levels. They also produced small values of Miss-Detection Probability at different values of Probability of False Alarm and adaptive threshold levels. The sensing performance was investigated under the influence of channel condition for proper operating conditions. An increase in the detection performance was achieved for cognitive users (secondary users) of the authorized unused dynamic spectrum holes (primary users) while operating in a very low signal-to-noise ratio  with the proper condition of minimum total error rate.

scholarly journals Fusion of Neuro-Signals and Dynamic Signatures for Person Authentication

Sensors ◽  
2019 ◽  
Vol 19 (21) ◽  
pp. 4641 ◽  
Author(s):  
Pradeep Kumar ◽  
Rajkumar Saini ◽  
Barjinder Kaur ◽  
Partha Pratim Roy ◽  
Erik Scheme
Keyword(s):  
Short Term Memory ◽  
User Authentication ◽  
Total Error ◽  
True Positive Rate ◽  
Decision Fusion ◽  
Eeg Signals ◽  
Total Error Rate ◽  
Private Data ◽  
Positive Rate ◽  
Dynamic Signature

Many biometric systems based on physiological traits such as ones facial characteristics, iris, and fingerprint have been developed for authentication purposes. Such security systems, however, commonly suffer from impersonation attacks such as obfuscation, abrasion, latent samples, and covert attack. More conventional behavioral methods, such as passwords and signatures, suffer from similar issues and can easily be spoofed. With growing levels of private data readily available across the internet, a more robust authentication system is needed for use in emerging technologies and mobile applications. In this paper, we present a novel multimodal biometric user authentication framework by combining the behavioral dynamic signature with the the physiological electroencephalograph (EEG) to restrict unauthorized access. EEG signals of 33 genuine users were collected while signing on their mobile phones. The recorded sequences were modeled using a bidirectional long short-term memory neural network (BLSTM-NN) based sequential classifier to accomplish person identification and verification. An accuracy of 98.78% was obtained for identification using decision fusion of dynamic signatures and EEG signals. The robustness of the framework was also tested against 1650 impersonation attempts made by 25 forged users by imitating the dynamic signatures of genuine users. Verification performance was measured using detection error tradeoff (DET) curves and half total error rate (HTER) security matrices using true positive rate (TPR) and false acceptance rate (FAR), resulting in 3.75% FAR and 1.87% HTER with 100% TPR for forgery attempts.

scholarly journals Collaborative Spectrum Sensing Optimisation Algorithms for Cognitive Radio Networks

2010 ◽  
Vol 2010 ◽  
pp. 1-20 ◽  
Author(s):  
Kamran Arshad ◽  
Muhammad Ali Imran ◽  
Klaus Moessner
Keyword(s):  
Cognitive Radio ◽  
Spectrum Sensing ◽  
Signal To Noise Ratio ◽  
Fusion Rule ◽  
Decision Fusion ◽  
Soft Decision ◽  
Collaborative Spectrum Sensing ◽  
Main Challenge ◽  
Fusion Centre ◽  
Sensing Performance

The main challenge for a cognitive radio is to detect the existence of primary users reliably in order to minimise the interference to licensed communications. Hence, spectrum sensing is a most important requirement of a cognitive radio. However, due to the channel uncertainties, local observations are not reliable and collaboration among users is required. Selection of fusion rule at a common receiver has a direct impact on the overall spectrum sensing performance. In this paper, optimisation of collaborative spectrum sensing in terms of optimum decision fusion is studied for hard and soft decision combining. It is concluded that for optimum fusion, the fusion centre must incorporate signal-to-noise ratio values of cognitive users and the channel conditions. A genetic algorithm-based weighted optimisation strategy is presented for the case of soft decision combining. Numerical results show that the proposed optimised collaborative spectrum sensing schemes give better spectrum sensing performance.

Modal frequencies of bridges from GNSS (GPS) monitoring data: Experimental, statistical evidence

2021 ◽  
Vol 17 (1-2) ◽  
pp. 3-14
Author(s):  
Stathis C. Stiros ◽  
F. Moschas ◽  
P. Triantafyllidis
Keyword(s):  
Signal To Noise Ratio ◽  
Vertical Axis ◽  
Bridge Monitoring ◽  
Low Snr ◽  
True Value ◽  
Gps Satellites ◽  
Wide Range ◽  
Spectral Peaks ◽  
Monitoring Survey ◽  
True Frequency

GNSS technology (known especially for GPS satellites) for measurement of deflections has proved very efficient and useful in bridge structural monitoring, even for short stiff bridges, especially after the advent of 100 Hz GNSS sensors. Mode computation from dynamic deflections has been proposed as one of the applications of this technology. Apart from formal modal analyses with GNSS input, and from spectral analysis of controlled free attenuating oscillations, it has been argued that simple spectra of deflections can define more than one modal frequencies. To test this scenario, we analyzed 21 controlled excitation events from a certain bridge monitoring survey, focusing on lateral and vertical deflections, recorded both by GNSS and an accelerometer. These events contain a transient and a following oscillation, and they are preceded and followed by intervals of quiescence and ambient vibrations. Spectra for each event, for the lateral and the vertical axis of the bridge, and for and each instrument (GNSS, accelerometer) were computed, normalized to their maximum value, and printed one over the other, in order to produce a single composite spectrum for each of the four sets. In these four sets, there was also marked the true value of modal frequency, derived from free attenuating oscillations. It was found that for high SNR (signal-to-noise ratio) deflections, spectral peaks in both acceleration and displacement spectra differ by up to 0.3 Hz from the true value. For low SNR, defections spectra do not match the true frequency, but acceleration spectra provide a low-precision estimate of the true frequency. This is because various excitation effects (traffic, wind etc.) contribute with numerous peaks in a wide range of frequencies. Reliable estimates of modal frequencies can hence be derived from deflections spectra only if excitation frequencies (mostly traffic and wind) can be filtered along with most measurement noise, on the basis of additional data.

scholarly journals Cooperative Spectrum Sensing Based on Convolutional Neural Networks

2021 ◽  
Vol 11 (10) ◽  
pp. 4440
Author(s):  
Youheng Tan ◽  
Xiaojun Jing
Keyword(s):  
Neural Networks ◽  
Spectrum Sensing ◽  
Convolutional Neural Networks ◽  
Cooperative Spectrum Sensing ◽  
Signal To Noise Ratio ◽  
Majority Voting ◽  
Signal To Noise ◽  
Hidden Terminal ◽  
Simulation Results ◽  
Sensing Performance

Cooperative spectrum sensing (CSS) is an important topic due to its capacity to solve the issue of the hidden terminal. However, the sensing performance of CSS is still poor, especially in low signal-to-noise ratio (SNR) situations. In this paper, convolutional neural networks (CNN) are considered to extract the features of the observed signal and, as a consequence, improve the sensing performance. More specifically, a novel two-dimensional dataset of the received signal is established and three classical CNN (LeNet, AlexNet and VGG-16)-based CSS schemes are trained and analyzed on the proposed dataset. In addition, sensing performance comparisons are made between the proposed CNN-based CSS schemes and the AND, OR, majority voting-based CSS schemes. The simulation results state that the sensing accuracy of the proposed schemes is greatly improved and the network depth helps with this.

scholarly journals CMUT-Based Sensor for Acoustic Emission Application: Experimental and Theoretical Contributions to Sensitivity Optimization

Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 2042
Author(s):  
Redha Boubenia ◽  
Patrice Le Moal ◽  
Gilles Bourbon ◽  
Emmanuel Ramasso ◽  
Eric Joseph
Keyword(s):  
Signal Processing ◽  
Signal To Noise Ratio ◽  
Ultrasonic Transducer ◽  
Operating Conditions ◽  
Geometrical Parameters ◽  
Signal To Noise ◽  
Coupling Conditions ◽  
Sensor Structure ◽  
Noise Ratio ◽  
Electrical Connections

The paper deals with a capacitive micromachined ultrasonic transducer (CMUT)-based sensor dedicated to the detection of acoustic emissions from damaged structures. This work aims to explore different ways to improve the signal-to-noise ratio and the sensitivity of such sensors focusing on the design and packaging of the sensor, electrical connections, signal processing, coupling conditions, design of the elementary cells and operating conditions. In the first part, the CMUT-R100 sensor prototype is presented and electromechanically characterized. It is mainly composed of a CMUT-chip manufactured using the MUMPS process, including 40 circular 100 µm radius cells and covering a frequency band from 310 kHz to 420 kHz, and work on the packaging, electrical connections and signal processing allowed the signal-to-noise ratio to be increased from 17 dB to 37 dB. In the second part, the sensitivity of the sensor is studied by considering two contributions: the acoustic-mechanical one is dependent on the coupling conditions of the layered sensor structure and the mechanical-electrical one is dependent on the conversion of the mechanical vibration to electrical charges. The acoustic-mechanical sensitivity is experimentally and numerically addressed highlighting the care to be taken in implementation of the silicon chip in the brass housing. Insertion losses of about 50% are experimentally observed on an acoustic test between unpackaged and packaged silicon chip configurations. The mechanical-electrical sensitivity is analytically described leading to a closed-form amplitude of the detected signal under dynamic excitation. Thus, the influence of geometrical parameters, material properties and operating conditions on sensitivity enhancement is clearly established: such as smaller electrostatic air gap, and larger thickness, Young’s modulus and DC bias voltage.

scholarly journals Convolution Network with Custom Loss Function for the Denoising of Low SNR Raman Spectra

Sensors ◽  
2021 ◽  
Vol 21 (14) ◽  
pp. 4623
Author(s):  
Sinead Barton ◽  
Salaheddin Alakkari ◽  
Kevin O’Dwyer ◽  
Tomas Ward ◽  
Bryan Hennelly
Keyword(s):  
Raman Spectra ◽  
Loss Function ◽  
Signal To Noise Ratio ◽  
Biomedical Science ◽  
Clinical Tool ◽  
Signal To Noise ◽  
Low Snr ◽  
Low Intensity ◽  
Spectral Peaks ◽  
Noise Ratio

Raman spectroscopy is a powerful diagnostic tool in biomedical science, whereby different disease groups can be classified based on subtle differences in the cell or tissue spectra. A key component in the classification of Raman spectra is the application of multi-variate statistical models. However, Raman scattering is a weak process, resulting in a trade-off between acquisition times and signal-to-noise ratios, which has limited its more widespread adoption as a clinical tool. Typically denoising is applied to the Raman spectrum from a biological sample to improve the signal-to-noise ratio before application of statistical modeling. A popular method for performing this is Savitsky–Golay filtering. Such an algorithm is difficult to tailor so that it can strike a balance between denoising and excessive smoothing of spectral peaks, the characteristics of which are critically important for classification purposes. In this paper, we demonstrate how Convolutional Neural Networks may be enhanced with a non-standard loss function in order to improve the overall signal-to-noise ratio of spectra while limiting corruption of the spectral peaks. Simulated Raman spectra and experimental data are used to train and evaluate the performance of the algorithm in terms of the signal to noise ratio and peak fidelity. The proposed method is demonstrated to effectively smooth noise while preserving spectral features in low intensity spectra which is advantageous when compared with Savitzky–Golay filtering. For low intensity spectra the proposed algorithm was shown to improve the signal to noise ratios by up to 100% in terms of both local and overall signal to noise ratios, indicating that this method would be most suitable for low light or high throughput applications.

scholarly journals Automotive antenna diversity system for satellite radio with high phase accuracy in low SNR-scenarios

2018 ◽  
Vol 10 (5-6) ◽  
pp. 578-586 ◽  
Author(s):  
Simon Senega ◽  
Ali Nassar ◽  
Stefan Lindenmeier
Keyword(s):  
Signal To Noise Ratio ◽  
A Priori ◽  
Multipath Fading ◽  
Correction Method ◽  
Antenna System ◽  
Antenna Diversity ◽  
Phase Detection ◽  
Low Snr ◽  
Single Antenna ◽  
Noise Correction

AbstractFor a fast scan-phase satellite radio antenna diversity system a noise correction method is presented for a significant improvement of audio availability at low signal-to-noise ratio (SNR) conditions. An error analysis of the level and phase detection within the diversity system in the presence of noise leads to a correction method based on a priori knowledge of the system's noise floor. This method is described and applied in a hardware example of a satellite digital audio radio services antenna diversity circuit for fast fading conditions. Test drives, which have been performed in real fading scenarios, are described and results are analyzed statistically. Simulations of the scan-phase antenna diversity system show higher signal amplitudes and availabilities. Measurement results of dislocated antennas as well as of a diversity antenna set on a single mounting position are presented. A comparison of a diversity system with noise correction, the same system without noise correction, and a single antenna system with each other is performed. Using this new method in fast multipath fading driving scenarios underneath dense foliage with a low SNR of the antenna signals, a reduction in audio mute time by one order of magnitude compared with single antenna systems is achieved with the diversity system.

scholarly journals Machine Learning Based Track Classification and Estimation using Kalman Filter

2020 ◽  
Vol 9 (1) ◽  
pp. 1700-1704
Keyword(s):  
Machine Learning ◽  
Kalman Filter ◽  
Learning Algorithm ◽  
Signal To Noise Ratio ◽  
Minimum Mean Square Error ◽  
Velocity Model ◽  
Supervised Machine Learning ◽  
Multiple Target ◽  
Low Snr

Classification of target from a mixture of multiple target information is quite challenging. In This paper we have used supervised Machine learning algorithm namely Linear Regression to classify the received data which is a mixture of target-return with the noise and clutter. Target state is estimated from the classified data using Kalman filter. Linear Kalman filter with constant velocity model is used in this paper. Minimum Mean Square Error (MMSE) analysis is used to measure the performance of the estimated track at various Signal to Noise Ratio (SNR) levels. The results state that the error is high for Low SNR, for High SNR the error is Low

Sign in / Sign up

Export Citation Format

Share Document