scholarly journals Research on Redesign and Manufacturing of an Automatic Roll Cutting Machine

2021 ◽  
Vol 5 (1) ◽  
pp. 27
Author(s):  
Tan Thang Nguyen ◽  
Manh Tuan Bui ◽  
Thanh-Phong Dao
Keyword(s):  
Significant Contribution ◽  
Theoretical Calculations ◽  
Garment Industry ◽  
Economic Sectors ◽  
Creative Commons ◽  
Cutting Machine ◽  
The Cost ◽  
Size Tolerance ◽  
Working Quality ◽  
Open Access Article

Textile-and-garment industry is one of the largest economic sectors in Vietnam, with 4000 enterprises and a turnover of 20 billion USD/year. Therefore, designing and manufacturing are essential tasks for roll fabric cutting machines to serve the textile and garment industry. First of all, theoretical calculations are formulated for an automatic roll cutting machine. Then, simulations are conducted by a combination of MITcalc and Catia software. A prototype of a fabric cutting machine is manufactured and experiments are implemented. The experimental results show that the machine stably works and overcomes the disadvantages of the popular cutting machines with the core-free roll on the market. The results also found that the size tolerance is achieved about ± 0.5 mm, and this ensures good working quality. The designed machine has a significant contribution to the textile and garment area in decreasing the cost of the cutting process.  This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium provided the original work is properly cited.

Microcontroller Device for Conductor Identification Using Acoustic Signal

2020 ◽  
Vol 67 (1) ◽  
pp. 28-34
Author(s):  
Aleksandr V. Vinogradov ◽  
Aleksey V. Bukreev
Keyword(s):  
Acoustic Signal ◽  
Acoustic Waves ◽  
Theoretical Calculations ◽  
Poor Quality ◽  
Electrical Circuit ◽  
Research Purpose ◽  
Electrical Wiring ◽  
The Right ◽  
The Cost ◽  
Technical Solutions

When repairing and replacing electrical wiring in enterprises, the main difficulty is the lack or poor quality of documentation, plans for conductors laying. Distinguishing wires (cables) and their cores by the color of the shells or using tags attached to the ends is difficult if the shells have the same color and there are no tags. Devices and technical solutions used to identify wires and cables do not allow recognizing conductors without breaking the electrical circuit, removing insulation, and de-energizing the network. Searching for the right conductor is a time-consuming operation. (Research purpose) The research purpose is developing a new microcontroller device for identifying wires using an acoustic signal. (Materials and methods) Literature sources has been searched for devices for conductors identifying. (Results and discussion) The article proposes a method that involves feeding an acoustic signal to a wire at one point and capturing it at another, in order to recognize the desired wire. The article presents results of comparison of the developed microcontroller device for identifying conductors using an acoustic signal with known devices and methods for conductors recognizing. (Conclusions) The article reveals the shortcomings of existing methods and means of identifying wires and cables. Authors performed a theoretical calculation of the sound pressure in the conductor at a given distance. The article presents the calculation of speed of acoustic waves in conductors with different types of insulation. Authors designed a microcontroller device for identifying conductors using an acoustic signal and tested it. It was determined that the device increases the safety of work, reduces the cost of operating internal wiring and identification time; eliminates the violation of wire insulation, the need to disable electrical receivers. The convergence of theoretical calculations and experimental data was shown.

scholarly journals Analisis Kelayakan Ekonomi Mesin Pencacah Rumput Gajah Tipe Reel

Agrikultura ◽  
2018 ◽  
Vol 29 (3) ◽  
pp. 144
Author(s):  
Wahyu K Sugandi ◽  
Asep Yusuf
Keyword(s):  
Net Present Value ◽  
Payback Period ◽  
Economic Feasibility ◽  
Cost Ratio ◽  
Elephant Grass ◽  
Period Analysis ◽  
Benefit Cost Ratio ◽  
Cutting Machine ◽  
The Cost ◽  
Benefit Cost

ABSTRACTEconomic analysis reel type cutting machine for elephant grassThe need grass for fodder in the region Lembang has been increasing, but it does not followed byits quality. Therefore, cutting machine which is able to cut the fodder no more than 5 cm size is needed. The Laboratory of Agricultural Machinery and Machinery Department of Agricultural Engineering and Biosystem FTIP Unpad had been developed an elephant grass enchant machine inaccordance with the requirements of making the silage, but no economic feasibility analysis has been done for the machine. Therefore it was necessary to study the economic feasibility analysis of elephant grass cutting machine. The method used in this study was the economic analysis methodwhich includes the cost of production and the breakeven point, and business feasibility including net present value (NPV), benefit cost ratio analysis (BCR), internal rate of return (IRR) and payback period analysis (PBP). The results showed that the cost of production of elephant grass enemies was Rp 2,178 / kg with production breakeven 18.769 kg, BC ratio of 1.15, NPV1 of Rp 70,770, - NPV2 of Rp 61.333, - IRR of 27% and payback period during 2 months. So it can be concluded that the use of elephant-type elephant chopper machine was feasible to use.Keywords: Elephant grass, economic analysis, cutting machineABSTRAKKebutuhan rumput gajah untuk pakan ternak (silase) di daerah Lembang terus meningkat. Syarat pembuatan silase tersebut bahwa panjang potongan rumput gajah sebaiknya < 5 cm. Untuk itudiperlukan sebuah mesin pencacah rumput gajah sesuai syarat pembuatan silase. LaboratoriumAlat dan Mesin Pertanian Departemen Teknik Pertanian dan Biosistem FTIP Unpad telah mengembangkan sebuah mesin pencacah rumput gajah sesuai syarat pembuatan silase tersebut, tetapi belum dilakukan analisis kelayakan ekonomi untuk mesin tersebut. Oleh karena itdiperlukan suatu penelitian berkenaan dengan analisis kelayakan ekonomi mesin pencacah rumput gajah. Metode yang digunakan pada penelitian ini adalah metode analisis ekonomi yang meliputi biaya pokok produksi dan titik impas, serta kelayakan usaha yang meliputi net present value(NPV), benefit cost ratio analysis (BCR), internal rate of return (IRR) dan payback period analysis(PBP). Hasil penelitian menunjukkan bahwa biaya pokok produksi mesin pencacah rumput gajah adalah Rp 2.178/kg dengan titik impas produksi 18.769 kg, BC rasio sebesar 1,15, NPV1 sebesar Rp 70.770,- NPV2 = Rp 61.333,- IRR sebesar 27% dan payback period selama 2 bulan. Maka dapat disimpulkan bahwa pengunaan mesin pencacah rumput gajah tipe reel layak digunakan. Kata Kunci : Rumput Gajah, Analisis Ekonomi, Mesin Pencacah

scholarly journals Research on the Correlation of Serum PCT and Plasma GSN Levels with the Prognosis of Urosepsis Patients

2020 ◽  
Vol 36 (5) ◽  
Author(s):  
Na Cui ◽  
Zhanbiao Yu ◽  
Zhi Chen ◽  
Ning Chen
Keyword(s):  
Poor Prognosis ◽  
Original Work ◽  
Protective Factor ◽  
Good Prognosis ◽  
Control Group ◽  
Creative Commons ◽  
The Poor ◽  
Prognosis Group ◽  
Good Prognosis Group ◽  
Open Access Article

Objective: To explore the correlation of procalcitonin (PCT) and gelsolin (GSN) with the prognosis of urosepsis patients. Method: The data of 71 urosepsis patients from March 2015 to April 2019 who were admitted to and treated in Affiliated Hospital of Hebei University were analyzed and compared with those of 92 healthy persons. Serum PCT and plasma GSN levels at different times after treatment were detected. According to prognosis, patients were classified into the good prognosis group or the poor prognosis group. The serum PCT and plasma GSN levels of both groups were compared. Result: The serum PCT level of the urosepsis group on the 1st, 3rd, 5th and 7th days was obviously higher than that of the control group (P<0.05). The plasma GSN levels of the urosepsis group on the 1st, 3rd, 5th and 7th days were obviously lower than those of the control group (P<0.05).The serum PCT level of the poor prognosis group on the 1st, 3rd, 5th and 7th days was obviously higher than that of the good prognosis group (P<0.05). The plasma GSN level of the poor prognosis group on the 1st, 3rd, 5th and 7th days was obviously lower than that of the good prognosis group (P<0.05). PCT was an independent risk factor influencing the prognosis of urosepsis patients and that GSN was a protective factor (P<0.05). Conclusion: The serum PCT and plasma GSN levels can accurately predict the severity and prognosis of urosepsis patients and reflect the disease state of early urosepsis patients. High PCT levels and low GSN levels indicate poor prognosis, and clinicians should consider these values. doi: https://doi.org/10.12669/pjms.36.5.2143 How to cite this:Cui N, Yu Z, Chen Z, Chen N. Research on the Correlation of Serum PCT and Plasma GSN Levels with the Prognosis of Urosepsis Patients. Pak J Med Sci. 2020;36(5):---------. doi: https://doi.org/10.12669/pjms.36.5.2143 This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

scholarly journals Promoting Research Culture at Indus Health Network

2019 ◽  
Vol 36 (ICON-Suppl) ◽  
Author(s):  
Shaukat Ali Jawaid
Keyword(s):  
Open Access ◽  
Original Work ◽  
Research Culture ◽  
Health Network ◽  
Creative Commons ◽  
Special Supplement ◽  
Open Access Article

doi: https://doi.org/10.12669/pjms.36.ICON-Suppl.1861 How to cite this:Jawaid SA. Promoting Research Culture at Indus Health Network. Pak J Med Sci. Special Supplement ICON 2020. 2020;36(1):S2. doi: https://doi.org/10.12669/pjms.36.ICON-Suppl.1861 This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

scholarly journals Malaria and the climate in Karachi: An eight year review

2019 ◽  
Vol 36 (ICON-Suppl) ◽  
Author(s):  
Fivzia Herekar ◽  
Sundus Iftikhar ◽  
Ahsana Nazish ◽  
Sabeen Rehman
Keyword(s):  
Chart Review ◽  
Climatic Factors ◽  
Meteorological Data ◽  
Climatic Variability ◽  
Climate Variables ◽  
Creative Commons ◽  
Medical Chart Review ◽  
Special Supplement ◽  
The Relationship ◽  
Open Access Article

Background and Objective: Malaria is an arthropod-borne infectious disease transmitted by the mosquito Anopheles and claims millions of lives globally every year. Reasons for failure to eradicate this disease are multifactorial. The seasonality of the malaria is principally determined by climatic factors conducive for breeding of the vector. We aimed to study the relationship between climatic variability and the seasonality of malaria over an eight-year duration. Methods: This was a retrospective medical chart review of 8,844 confirmed cases of malaria which presented to The Indus Hospital, Karachi from January 2008 to November 2015. Cases were plotted against meteorological data for Karachi to elicit monthly variation. Results: A secular incline and seasonality in malaria cases over the duration of 8 years was seen. More cases were reported in the summer, rainy season compared with the other three seasons in each year. There was significant association with specific climate variables such as temperature, moisture, and humidity. Conclusion: There is a marked seasonal variation of malaria in Karachi, influenced by various environmental factors. Identification of the ‘the concentrated period’ of malaria can be helpful for policymakers to deploy malaria control interventions. doi: https://doi.org/10.12669/pjms.36.ICON-Suppl.1712 How to cite this:Herekar F, Iftikhar S, Nazish A, Rehman S. Malaria and the climate in Karachi: An eight year review. Pak J Med Sci. Special Supplement ICON 2020. 2020;36(1):S33-S37. doi: https://doi.org/10.12669/pjms.36.ICON-Suppl.1712 This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

scholarly journals Comparison of Tooth Widths, Arch Widths and Arch Lengths in Class-I Normal Dentition to Class-I and II Crowded Dentitions

2021 ◽  
Vol 37 (2) ◽  
Author(s):  
Hafiza Zobia Shafique ◽  
Rumeesha Zaheer ◽  
Abdullah Jan ◽  
Ayesha Fazal
Keyword(s):  
Treatment Planning ◽  
Armed Forces ◽  
Class Ii ◽  
Vital Role ◽  
Class I ◽  
Permanent Teeth ◽  
Creative Commons ◽  
Normal Occlusion ◽  
Complete Set ◽  
Open Access Article

Background and Objective: Dental study casts play a vital role in the diagnosis and treatment planning of various orthodontic cases. This study was carried out to compare the tooth widths, arch widths, and arch lengths in Class-I normal dentition to those in Class-I and Class-II crowded dentition in an effort to improve treatment planning and to eventually reduce treatment duration. Methods: Total 170 patients, 12 to 40 years of age with a complete set of permanent teeth till 1st molars; who presented to the Orthodontics Department at Armed Forces Institute of Dentistry (A.F.I.D), Rawalpindi from Sep 2019 to Feb 2020, were included in the study. Non-probability purposive method of sampling was used. The dental casts obtained were used to measure tooth widths, arch widths, and arch lengths. Subjects were classified into Class-I normal and Class-I and Class-II crowded occlusion and comparison of the sum of tooth widths, arch widths, and arch length discrepancies were determined among the three occlusion groups. Data was analyzed in SPSS version 21 and independent samples t-test was used to differentiate the variables of interest. Results: Out of 170 subjects, 73 (42.9%) subjects had Class-I normal occlusion while 97 (57%) had Class-I and Class-II crowded occlusions. No statistical difference was found between the occlusal groups with regard to the sum of tooth widths, inter-canine widths, inter-first premolar widths, inter-second premolar widths and inter-molar widths. However, a remarkable difference was observed between the occlusal groups with respect to arch perimeters and arch length discrepancies (p = 0.000 and 0.000 respectively). Conclusions: Results of the current study indicate that crowding of teeth occurs as a consequence of decreased arch perimeters which may lead to increased arch length discrepancies. However, no prominent difference was noticed in the sum of tooth widths and arch widths among different occlusal groups. doi: https://doi.org/10.12669/pjms.37.2.3240 How to cite this:Shafique HZ, Zaheer R, Jan A, Fazal A. Comparison of Tooth Widths, Arch Widths and Arch Lengths in Class-I Normal Dentition to Class-I and II Crowded Dentitions. Pak J Med Sci. 2021;37(2):---------. doi: https://doi.org/10.12669/pjms.37.2.3240 This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

scholarly journals A Framework for Protecting Pregnant Women in the Era of COVID-19 Pandemic

2021 ◽  
Vol 10 (1) ◽  
pp. 109-112
Author(s):  
Deepa Dongarwar ◽  
Veronica Ajewole ◽  
Kiydra Harris ◽  
Emmanuella Oduguwa ◽  
Theresa Ofili ◽  
...  
Keyword(s):  
Open Access ◽  
Severe Acute Respiratory Syndrome ◽  
Best Practices ◽  
Global Health ◽  
Pregnant Women ◽  
Original Work ◽  
Creative Commons ◽  
New Challenges ◽  
Work First ◽  
Open Access Article

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the causative agent for the coronavirus disease 2019 (COVID-19) pandemic, highlighted and compounded problems while posing new challenges for the pregnant population. Although individual organizations have provided disparate information, guidance, and updates on managing the pregnant population during the current COVID-19 pandemic, it is important to develop a collective model that highlights all the best practices needed to protect the pregnant population during the pandemic. To establish a standard for ensuring safety during the pandemic, we present a framework that describes best practices for the management of the pregnant population during the ongoing COVID-19pandemic.   Copyright © 2021 Dongarwar, et al. Published by Global Health and Education Projects, Inc. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work, first published in this journal, is properly cited.

scholarly journals Problems faced by Researchers and pressure on Impact Factor Journal Editors

2021 ◽  
Vol 37 (3) ◽  
Author(s):  
Shaukat Ali Jawaid
Keyword(s):  
Open Access ◽  
Impact Factor ◽  
Original Work ◽  
Impact Factor Journal ◽  
Creative Commons ◽  
Journal Editors ◽  
Open Access Article

doi: https://doi.org/10.12669/pjms.37.3.4296 How to cite this:Jawaid SA. Problems faced by Researchers and pressure on Impact Factor Journal Editors. Pak J Med Sci. 2021;37(3):616-620.  doi: https://doi.org/10.12669/pjms.37.3.4296 This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

scholarly journals COVID-19 Vaccination Rates by Global Universal Health Care Coverage Status

2021 ◽  
Vol 5 (1) ◽  
pp. 33-36
Author(s):  
Deepa Dongarwar ◽  
Hamisu M. Salihu
Keyword(s):  
Health Care ◽  
Herd Immunity ◽  
Vaccination Rate ◽  
Universal Health Care ◽  
Vaccination Rates ◽  
Creative Commons ◽  
Universal Health Care Coverage ◽  
Universal Health ◽  
Open Access Article ◽  
Better Than

Healthcare coverage and the type of insurance have always played huge roles in public health outcomes. With coronavirus disease-2019 (COVID-19) vaccination now available across the world, we sought to determine vaccination rates across countries with Universal Health Care (UHC) coverage versus those without. We utilized the vaccination information from the Coronavirus (COVID-19) Vaccinations website, and calculated early vaccination rate for each country as of January, 13, 2021 by dividing the total number of vaccinations given to the total population of the country. We observed that the average early vaccination rate for countries with UHC was 1.55%, whereas that for countries without UHC was 0.51%. Countries with UHC are performing much better than those without UHC in this initial race for providing herd immunity across the globe.   Copyright © 2021 Dongarwar and Salihu. Published by Global Health and Education Projects, Inc. This is an open-access article distributed under the terms of the Creative Commons Attribution License CC BY 4.0.

scholarly journals Spontaneous Detorsion of Sigmoid Volvulus in a patient with Nineteen-Volvulus episode history: A rare outcome of an extremely rare clinical entity

2021 ◽  
Vol 37 (7) ◽  
Author(s):  
Sabri Selcuk Atamanalp ◽  
Esra Disci ◽  
Cansu Tatar Atamanalp ◽  
Refik Selim Atamanalp
Keyword(s):  
Open Access ◽  
Original Work ◽  
Sigmoid Volvulus ◽  
Clinical Entity ◽  
Rare Clinical Entity ◽  
Creative Commons ◽  
Multiple Episode ◽  
Open Access Article

Sigmoid volvulus (SV) recurrence more than 10 times is an extremely rare clinical entity and spontaneous detorsion is a rare outcome of SV. In this paper, we report a case with 19 previous SV attacks, in last of which spontaneous detorsion occurred. Such a multiple-episode history as well as an unexpected recovery was unique in a 1,036-case clinical profession of Ataturk University with SV over a 54.5-year period. doi: https://doi.org/10.12669/pjms.37.7.4703 How to cite this:Atamanalp SS, Disci E, Tatar Atamanalp C, Atamanalp RS. Spontaneous Detorsion of Sigmoid Volvulus in a patient with Nineteen-Volvulus episode history: A rare outcome of an extremely rare clinical entity. Pak J Med Sci. 2021;37(7):---------.  doi: https://doi.org/10.12669/pjms.37.7.4703 This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Sign in / Sign up

Export Citation Format

Share Document