scholarly journals CHARACTERIZATION AND KINETIC ADSORPTION OF THE DIFFERENT SOURCES ACTIVATED CARBON FOR LIQUID-PHASE ADSORPTION

2015 ◽  
Vol 2 (1) ◽  
pp. 58
Author(s):  
Sutrisno ◽  
Yusnaidar
Keyword(s):  
Activated Carbon ◽  
Coal Mining ◽  
Oil Palm ◽  
Activated Carbons ◽  
Hold Time ◽  
Adsorptive Capacity ◽  
Activation Temperature ◽  
Kinetic Adsorption ◽  
Coconut Shells ◽  
Adsorptive Properties

 ABSTRACT The activated carbon from oil-palm stones of agriculural by-products from palm-oil mills in several tropical countries, a coconut shells and a solid waste exploring coals mining (ex-coal mining) were studied in this paper. The activated and characterized carbon are carried out both chemical and adsorptive properties. The different chemical activators such as H3PO4, KOH, H2SO4 in the different ratio and also different temperature from 550° to 850°C was done. The adsorptive properties are including the textural properties of the activated carbons are investigated. It was found that the temperature and hold time had significantly influences on the surface area and pore size in the distribution of the activated carbon. The optimum conditions for preparing these activated carbons from chars. paralyzed at 600°C to derive the highest specific surface areas were found to be an activation temperature of 750°C for phenol adsorption of KOH for carbon from coconut shells, H3PO4 for oil palm stone and ex-coal mining activator in 850°C. For chemical characterization, AAS and a Fourier transform infrared (FTIR) spectroscopy were used to identify the inorganic components and surface organic functional groups of the activated carbons, respectively. For the determination of the adsorptive capacity of the activated carbons, adsorption of phenol was carried out using spectrophotometric analyses. Experimental results showed that phenol and iodine could be adsorbed effectively by the three different activated carbons. The adsorptive capacity of these activated carbons was comparable with those of some commercial activated carbons by using Juan, R-S et al’s model[1]. Keywords: activated carbon, oil palm stone, coconout shell, ex-coal maining, phenol reduction, kinetic adsorption, adsorptive capacity

scholarly journals Optimization of Activated Carbons Prepared byH3PO4and Steam Activation of Oil Palm Shells

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Daouda Kouotou ◽  
Horace Ngomo Manga ◽  
Abdelaziz Baçaoui ◽  
Abdelrani Yaacoubi ◽  
Joseph Ketcha Mbadcam
Keyword(s):  
Activated Carbon ◽  
Oil Palm ◽  
Activated Carbons ◽  
Optimum Conditions ◽  
Steam Activation ◽  
Experimental Conditions ◽  
Activation Temperature ◽  
Impregnation Ratio ◽  
Preparation Conditions ◽  
Two Factors

In this study, activated carbons were prepared from oil palm shells by physicochemical activation. The methodology of experimental design was used to optimize the preparation conditions. The influences of the impregnation ratio (0.6–3.4) and the activation temperature between 601°C and 799°C on the following three responses: activated carbon yield (R/AC-H3PO4), the iodine adsorption (I2/AC-H3PO4), and the methylene blue adsorption (MB/AC-H3PO4) results were investigated using analysis of variance (ANOVA) to identify the significant parameters. Under the experimental conditions investigated, the activation temperature of 770°C and impregnation ratio of 2/1 leading to the R/AC-H3PO4of 52.10%, theI2/AC-H3PO4of 697.86 mg/g, and the MB/AC-H3PO4of 346.25 mg/g were found to be optimum conditions for producing activated carbon with well compromise of desirability. The two factors had both synergetic and antagonistic effects on the three responses studied. The micrographs of activated carbons examined with scanning electron microscopy revealed that the activated carbons were found to be mainly microporous and mesoporous.

Application of locally available materials for the treatment of organic polluted water

2002 ◽  
Vol 46 (9) ◽  
pp. 339-346 ◽  
Author(s):  
M.R. Salim ◽  
F. Othman ◽  
Md. Imtiaj Ali ◽  
J. Patterson ◽  
T. Hardy
Keyword(s):  
Activated Carbon ◽  
Water Treatment ◽  
Removal Efficiency ◽  
Oil Palm ◽  
Activated Carbons ◽  
Coastal Region ◽  
Coconut Shell ◽  
Polluted Water ◽  
Adsorptive Capacity ◽  
Agricultural Product

Several types of water treatment technologies including adsorption are now being used to treat polluted water. In this paper the removal of phenol by adsorption will be discussed. Activated carbons are successfully applied for purification of potable water and the removal of organic pollutants in wastwater. This paper is concerned with a low cost approach to treating waste water that is significant especially for those countries where oil palm is an available agricultural product like Malaysia, Ivory Coast, Nigeria, Thailand, Papua New Guinea. In the coastal region coconut is an available agricultural product and activated carbon prepared using coconut shell is also an economical method of water treatment. The materials used in this study were Commercial Activated Carbon (CAC), prepared from coconut shell and Modified Oil Palm Shell (MOPAS) of 1 to 2 mm diameters. The surface area of CAC and MOPAS was 38.5 m2/g and 38.2 m2/g respectively and the iodine number was determined as 674 and 454 for CAC and MOPAS, respectively. From the study the result shows above 70% removal efficiency for 5 mg/L and 40% removal efficiency for 20 mg/L of phenol solution. The performance efficiency will be discussed based on batch test, following Freundlich adsorption isotherm.The results indicate that CAC exhibits a higher adsorptive capacity (Kf of 0.079) as compared to MOPAS (Kf of 0.048). Hence a better removal efficiency for CAC at lower concentration of phenol. Results from column tests show a better adsorptive capacity for CAC (2.73) as compared to MOPAS (2.48).

scholarly journals Computer Analysis of the Effect of Activation Temperature on the Microporous Structure Development of Activated Carbon Derived from Common Polypody

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2951
Author(s):  
Mirosław Kwiatkowski ◽  
Jarosław Serafin ◽  
Andy M. Booth ◽  
Beata Michalkiewicz
Keyword(s):  
Activated Carbon ◽  
Porous Structure ◽  
Computer Analysis ◽  
Density Functional ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Geometrical Parameters ◽  
Activation Process ◽  
Microporous Structure ◽  
Activation Temperature

This paper presents the results of a computer analysis of the effect of activation process temperature on the development of the microporous structure of activated carbon derived from the leaves of common polypody (Polypodium vulgare) via chemical activation with phosphoric acid (H3PO4) at activation temperatures of 700, 800, and 900 °C. An unconventional approach to porous structure analysis, using the new numerical clustering-based adsorption analysis (LBET) method together with the implemented unique gas state equation, was used in this study. The LBET method is based on unique mathematical models that take into account, in addition to surface heterogeneity, the possibility of molecule clusters branching and the geometric and energy limitations of adsorbate cluster formation. It enabled us to determine a set of parameters comprehensively and reliably describing the porous structure of carbon material on the basis of the determined adsorption isotherm. Porous structure analyses using the LBET method were based on nitrogen (N2), carbon dioxide (CO2), and methane (CH4) adsorption isotherms determined for individual activated carbon. The analyses carried out showed the highest CO2 adsorption capacity for activated carbon obtained was at an activation temperature of 900 °C, a value only slightly higher than that obtained for activated carbon prepared at 700 °C, but the values of geometrical parameters determined for these activated carbons showed significant differences. The results of the analyses obtained with the LBET method were also compared with the results of iodine number analysis and the results obtained with the Brunauer–Emmett–Teller (BET), Dubinin–Radushkevich (DR), and quenched solid density functional theory (QSDFT) methods, demonstrating their complementarity.

Treatment of Dyeing and Printing Wastewater by Copper Oxide Loaded on Coconut Shell Activated Carbon

2011 ◽  
Vol 366 ◽  
pp. 412-415
Author(s):  
Yu De Liu ◽  
Bo Quan Jiang ◽  
Zheng Qiang Xiao
Keyword(s):  
Activated Carbon ◽  
Copper Oxide ◽  
Orthogonal Experiment ◽  
Chemical Activation ◽  
Copper Nitrate ◽  
Color Removal ◽  
Removal Rates ◽  
Activation Temperature ◽  
Coconut Shells ◽  
Coconut Shell Activated Carbon

The activated carbon loaded copper oxide catalyst was prepared from Hainan abandoned coconut shells using chemical activation method and applied in treatment of acid bright red GR simulation dyeing wastewater. The effects of phosphoric acid concentration, ratio of liquid to solid, activation time and activation temperature on the COD and color removal rates were investigated by orthogonal experiment. The results showed that the optimal values of the parameters above were 65% (in mass), 3:1, 2.5h and 500°C under the designed copper oxide loading conditions of calcining temperature 300°C,calcining time 3.0 h and use level of copper nitrate 15 mL. Using the prepared sample for the treatment of the wastewater, the COD and color removal rates reached 94.384% and 99.840%, respectively.

PREPARATION AND CHARACTERIZATION OF ACTIVATED CARBON FROM OIL PALM EMPTY FRUIT BUNCH WASTES USING ZINC CHLORIDE

2015 ◽  
Vol 74 (11) ◽  
Author(s):  
Riry Wirasnita ◽  
Tony Hadibarata ◽  
Abdull Rahim Mohd Yusoff ◽  
Zainab Mat Lazim
Keyword(s):  
Activated Carbon ◽  
Zinc Chloride ◽  
Oil Palm ◽  
Active Sites ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Proximate Analysis ◽  
Infrared Spectrometry ◽  
Empty Fruit Bunch

An oil palm empty fruit bunch-derived activated carbon has been successfully produced by chemical activation with zinc chloride and without chemical activation. The preparation was conducted in the tube furnace at 500oC for 1 h. The surface structure and active sites of activated carbons were characterized by means of Fourier transform infrared spectrometry and field emission scanning electron microscopy. The proximate analysis including moisture content, ash content, bulk density, pH, and pH at zero charge was conducted to identify the psychochemical properties of the adsorbent. The results showed that the zinc chloride-activated carbon has better characteristics compared to the carbon without chemical activation.  

scholarly journals INVESTIGATION OF THE SORPTION CHARACTERISTICS OF ACTIVATED CARBONS

2021 ◽  
Vol 2 (446) ◽  
pp. 105-109
Author(s):  
A.E. Ilyassov ◽  
A.О. Baikonurova ◽  
B.N. Surimbayev
Keyword(s):  
Activated Carbon ◽  
Activated Carbons ◽  
Raw Materials ◽  
Reference Sample ◽  
Heap Leaching ◽  
Gold Content ◽  
Coking Coal ◽  
Industrial Facilities ◽  
Coconut Shells ◽  
Sorption Characteristics

The article presents the results of a comparison of the sorption characteristics for gold of crushed activated carbon of the foreign Haycarb brand, obtained from expensive raw materials - coconut shells, and crushed activated carbon of the domestic Shubarkol brand, obtained from relatively cheap raw materials - low-ash coking coal. The activated carbon Shubarkol crushed to a class of -3.6+1.0 mm, was produced in Kazakhstan from coking coal by Shubarkolkomir JSC. To test the crushed coal Shubarkol, industrial crushed coal Haycarb, made from coconut shells, was used as a reference sample. This coal is widely used in gold mining enterprises for the sorption of dissolved gold from cyanide solutions and pulps. For research, a productive solution of the process of heap leaching of gold from oxidized ore of one of the deposits of Kazakhstan was used with the composition, mg/L: gold 0.82; silver 0.44; copper 8.34; pH 11.05. Determination of the sorption characteristics of coals was carried out by the method of saturation with gold when changing solutions. The results of changes in the gold content in the mother solution, its extraction and saturation of coals with precious metal after each sorption cycle from the productive heap leaching solution using crushed coals of the Shubarkol and Haycarb brands are presented. It follows from the obtained data that Shubarkol activated carbon has similar sorption characteristics compared to Haycarb activated carbon. The working capacity for gold of Shubarkol coal was 2.28 kg/ton of sorbent, and of Haycarb coal - 2.57 kg/ton. Thus, crushed coal Shubarkol, obtained from relatively cheap raw materials, can be successfully used at industrial facilities instead of foreign sorbent.

scholarly journals Characteristics of Activated Carbon from Oil Palm Fronds with the Addition of Sodium Carbonate (Na2CO3) and Sodium Chloride (NaCl) as an Activator

2019 ◽  
Vol 1 (1) ◽  
pp. 30-35
Author(s):  
Seri Maulina ◽  
Gewa Handika
Keyword(s):  
Activated Carbon ◽  
Sodium Chloride ◽  
Sodium Carbonate ◽  
Oil Palm ◽  
Elaeis Guineensis ◽  
Activation Temperature ◽  
Spectra Analysis ◽  
Oil Palm Fronds ◽  
The Difference ◽  
Palm Fronds

This paper aims to understand the difference in characteristics of activated carbon produced from oil palm fronds (Elaeis guineensis Jacq) through the addition of two different activators, namely sodium carbonate (Na2CO3) and sodium chloride (NaCl). To do this, activator concentration of 10 percent each with activation temperature of 600 oC were applied in the experiment. Moreover, to determine the quality of activated carbon produced, a morphological analysis of activated carbon surfaces as well as FTIR spectra analysis on activated carbon. Identification using FTIR spectrophotometer revealed that the activated carbon in this study contained functional groups of O-H, C = O, C = C, C-C, and C-H.

Removal of Cu, Fe, and Zn from Peat Water by Using Activated Carbon Derived from Oil Palm Leaves

2021 ◽  
Vol 1162 ◽  
pp. 65-73
Author(s):  
Rakhmawati Farma ◽  
Ona Lestari ◽  
Erman Taer ◽  
Apriwandi ◽  
Minarni ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Activated Carbon ◽  
Oil Palm ◽  
Activated Carbons ◽  
Nitrogen Adsorption ◽  
Surface Characteristics ◽  
Batch Adsorption ◽  
X Ray ◽  
Turbidity Level ◽  
Adsorption Desorption

Heavy metal such as Cu, Fe, and Zn are the most serious contributers to environmental problems. The removal of heavy metal from the environment is the research interest nowdays. The adsorption of Cu, Fe and Zn from wastewater was investigated with various activated carbons as adsorbents. The activated carbons were produced from oil palm leaves by using multi-activation methods. The H3PO4, NaOH, ZnCl2 and KOH were chosen as chemical activating agents. Batch adsorption experiment was used to test the ability of activated carbon to remove Cu, Fe, and Zn from wastewater. The surface characteristics of activated carbon were evaluated using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FTIR), and nitrogen adsorption-desorption isotherms. The Activated carbons were able to purify wastewater with a maximum turbidity level of 2.83 NTU. The AC-H3PO4 activated carbon showed the highest absorbability of Cu metal as 91.540%, while the highest absorbabilities of Zn and Fe metals were indicated by AC-KOH activated carbon of 22.853% and 82.244% absorption respectively. Therefore, these results enable the oil palm leaves to become a high potential for activated carbon as removal the heavy metals.

scholarly journals Effects of Maturity of Coconut Shells on Gold Adsorption Efficiencies of Derived Activated Carbons

2019 ◽  
Vol 19 (2) ◽  
pp. 50-54
Author(s):  
W. K. Buah ◽  
J. Darmey ◽  
F. Osei
Keyword(s):  
Activated Carbon ◽  
Activated Carbons ◽  
Cyanide Solution ◽  
Adsorption Capacities ◽  
Relative Hardness ◽  
Coconut Shells ◽  
Activation Times ◽  
Adsorption Rates

AbstractCoconut shells are used as precursors for preparation of activated carbons. The shells could vary in terms of their maturity. The influence of the maturity of the shells on gold adsorption efficiencies of derived activated carbons (ACs) from gold di-cyanide solution was investigated. The shells were pyrolysed at 900 ºC and the resulting chars were activated in steam at the same temperature for different durations. Assessment of the properties of the derived ACs revealed that; the hardness, gold adsorption capacities and rates of gold adsorption of the ACs depended on the maturity of the shells. The more matured the shells the harder the AC. The relative hardness and gold adsorption rates of the mature coconut shells activated carbons, HMand RM, respectively and those of the less mature shells, HLand RL, respectively were in the order of HM >HL and RM >RL. The relative hardness of the ACs derived from the more mature and less mature shells after 3 hrs activation were 99.3% and 94.0%, respectively and the gold adsorption rates were 5.78 mg Au/hr/gand 4.95 mg Au/hr/g, respectively. The adsorption rates and relative hardness depended on the duration of activation, where longer activation times resulted in increase in the adsorption rates and a decrease in relative hardness of the derived ACs. Keywords: Adsorption, Activated Carbon, Coconut Shells, Maturity, Relative Hardness

Preparation of activated carbons from wet activated sludge by direct chemical activation

2009 ◽  
Vol 59 (12) ◽  
pp. 2387-2394 ◽  
Author(s):  
X. Wang ◽  
N. Zhu ◽  
J. Xu ◽  
B. Yin
Keyword(s):  
Activated Carbon ◽  
Activated Sludge ◽  
Water Content ◽  
Iodine Value ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Total Pore Volume ◽  
Processing Parameters ◽  
Experimental Conditions ◽  
Activation Temperature

An improved method for preparing activated carbons from wet waste activated sludge (WAS) by direct chemical activation was studied in this paper. The effects of processing parameters on iodine adsorption capacity of the product were investigated. Results show that sludge-based activated carbon prepared with KOH had a larger iodine value than those activated with ZnCl2 and KCl. The maximum iodine value was observed at the KOH concentration of 0.50 M. Increasing the impregnation time from 10 to 20 h resulted in a 20% increase in the iodine value. The highest iodine value was obtained at the activation temperature of 600°C and holding time of 1 h. Sludge water content had insignificant effects on the iodine value of products. Raw WAS with a water content of 93.2% can be converted into an activated carbon with a high specific surface area of 737.6 m2 g−1 and iodine value of 864.8 mgg−1 under optimum experimental conditions. Other physical properties such as total pore volume, micropore volume and mean pore diameter of the product were also reported and compared with those of commercial activated carbon.

Sign in / Sign up

Export Citation Format

Share Document