First Successful Application of Digital Intelligent Artificial Lift DIAL System in Dual Strings in B Field Applying Lessons Learnt from its First Pilot Application in Different Field in Same Offshore Malaysia

2021 ◽  
Author(s):  
Suman Kumar ◽  
Mohamad Sazwan Ismail ◽  
Nurfarah Izwana Salleh ◽  
Amirul Adha Amsidom ◽  
M Haziq M Ghazali ◽  
...  
Keyword(s):  
Risk Assessment ◽  
Failure Analysis ◽  
Electrical Signal ◽  
Learning Curves ◽  
Well Completion ◽  
Scope Test ◽  
Lessons Learnt ◽  
Artificial Lift ◽  
The World ◽  
Gas Lift

Abstract There are five wells planned to be drilled in B field infill campaign starting Q3 2020 - Q1 2021 as per development plan. Two wells are planned to be installed with Digital Intelligent Artificial Lift (DIAL) system, which one in single string completion and another one in dual string completion. This paper will mainly describe on the DIAL application in dual strings completion in B field. The DIAL system has circumferential 3 active orifice valves to open/ close selectively or in combination, which is communicated and operated through TEC cable from surface remotely. Given that this will be the second DIAL system installation in the world, a back up gas lift mandrel (GLM) will be installed to mitigate the risk in case the DIAL system fails to work due to any unprecedented reason so that conventional gas lift valve can be installed in GLM and gas lift operations can be commensed. The world's first DIAL installation in dual strings was completed in a different field offshore Malaysia in Q2 2020. During well completion and system installation, all the DIAL units in short string were functioning well, however there were some issues initially observed in Continuity Resistance (CR) inconsistent reading during run in hole completion and then total failure was observed in long string after its installation based on CR test, TDR (Time Domain Refractometer) test, and Scope Test due to unprecedented technical issue which affected the downhole cable to receive and send electrical signal to operate DIAL valves. The risk assessment has been conducted with associated parties based on the failure analysis and lessons learnt from the first DIAL application in dual strings in order to implement mitigation plan and proceed with DIAL application in B field. This step is very crucial to build the learning curves as well as improve the operator's understanding on for future DIAL application in dual strings. This paper will summarize the DIAL tool functionality and its design, failure analysis & lessons learnt from other field offshore Malaysia, and risk assessment & mitigation plan carried out for the DIAL application in dual strings in B field. It marks the second application in the world at present & first successful DIAL application in dual strings worldwide presently.

Low Well Cost: Effective Cost Optimisation for Marginal Green Field Development Using Fit-for-Purpose Well Design

2021 ◽  
Author(s):  
Thivyashini Thamilyanan ◽  
Hasmizah Bakar ◽  
Irzee Zawawi ◽  
Siti Aishah Mohd Hatta
Keyword(s):  
Cost Effective ◽  
Second Phase ◽  
Sand Production ◽  
Field Development ◽  
Well Completion ◽  
Artificial Lift ◽  
Sand Control ◽  
Fit For Purpose ◽  
Reservoir Connectivity ◽  
Gas Lift

Abstract During the low oil price era, the ability to deliver a small business investment yet high monetary gains was the epitome of success. A marginal field with its recent success of appraisal drilling which tested 3000bopd will add monetary value if it is commercialized as early as possible. However, given its marginal Stock Tank Oil Initially in Place (STOIIP), the plan to develop this field become a real challenge to the team to find a fit-for-purpose investment to maximize the project value. Luxuries such as sand control, artificial lift and frequent well intervention need to be considered for the most cost-effective measures throughout the life of field ‘Xion’. During field development study, several development strategies were proposed to overcome the given challenges such as uncertainty of reservoir connectivity, no gas lift supply, limited footprint to cater surface equipment and potential sand production. Oriented perforation, Insitu Gas Lift (IGL), Pressure Downhole Gauge (PDG), Critical Drawdown Pressure (CDP) monitoring is among the approaches used to manage the field challenges will be discussed in this paper. Since there are only two wells required to develop this field, a minimum intervention well is the best option to improve the project economics. This paper will discuss the method chosen to optimize the well and completion strategy cost so that it can overcome the challenges mentioned above in the most cost-effective approach. Artificial lift will utilize the shallower gas reservoirs through IGL in comparison to conventional gas lift. Sand Production monitoring will utilize the PDG by monitoring the CDP. The perforation strategy will employ the oriented perforation to reduce the sand free drawdown limit compare to the full perforation strategy. The strategy to monitor production through PDG will also reduce the number of interventions to acquire pressure data in establishing reservoir connectivity for the second phase development through secondary recovery and reservoir pressure maintenance plan. This paper will also explain the innovative approaches adopted for this early monetization and fast track project which is only completed within 4 months. This paper will give merit to petroleum engineers and well completion engineers involved in the development of marginal fields.

Engaging Diaspora in Reconciliation Efforts in Sri Lanka: Lessons Learnt

2020 ◽  
Vol 17 (1) ◽  
pp. 7-16
Author(s):  
Amjad Mohamed-Saleem
Keyword(s):  
Sri Lanka ◽  
Cultural Capital ◽  
Trust Building ◽  
Social And Cultural Capital ◽  
Engagement Strategies ◽  
Post Conflict ◽  
Lessons Learnt ◽  
The World ◽  
Conflict Reconciliation ◽  
National Framework

With nearly three million Sri Lankans living overseas, across the world, there is a significant role that can be played by this constituency in post-conflict reconciliation.  This paper will highlight the lessons learnt from a process facilitated by International Alert (IA) and led by the author, working to engage proactively with the diaspora on post-conflict reconciliation in Sri Lanka.  The paper shows that for any sustainable impact, it is also critical that opportunities are provided to diaspora members representing the different communities of the country to interact and develop horizontal relations, whilst also ensuring positive vertical relations with the state. The foundation of such effective engagement strategies is trust-building. Instilling trust and gaining confidence involves the integration of the diaspora into the national framework for development and reconciliation. This will allow them to share their human, social and cultural capital, as well as to foster economic growth by bridging their countries of residence and origin.

Signature Analysis: Statistical Models and Their Application to FA

1996 ◽  
Author(s):  
C.K. Lakshminarayan ◽  
S. Pabbisetty ◽  
O. Adams ◽  
F. Pires ◽  
M. Thomas ◽  
...  
Keyword(s):  
Risk Assessment ◽  
Failure Analysis ◽  
Statistical Models ◽  
Essential Elements ◽  
Assessment Model ◽  
Signature Analysis ◽  
Risk Assessment Model ◽  
Sample Sizes ◽  
Reliability Engineering ◽  
Semiconductor Chips

Abstract This paper deals with the basic concepts of Signature Analysis and the application of statistical models for its implementation. It develops a scheme for computing sample sizes when the failures are random. It also introduces statistical models that comprehend correlations among failures that fail due to the same failure mechanism. The idea of correlation is important because semiconductor chips are processed in batches. Also any risk assessment model should comprehend correlations over time. The statistical models developed will provide the required sample sizes for the Failure Analysis lab to state "We are A% confident that B% of future parts will fail due to the same signature." The paper provides tables and graphs for the evaluation of such a risk assessment. The implementation of Signature Analysis will achieve the dual objective of improved customer satisfaction and reduced cycle time. This paper will also highlight it's applicability as well as the essential elements that need to be in place for it to be effective. Different examples have been illustrated of how the concept is being used by Failure Analysis Operations (FA) and Customer Quality and Reliability Engineering groups.

How India Fights with COVID-19 with Learning from Highly Affected Countries

2020 ◽  
Vol 15 ◽  
Author(s):  
Pooja Sharma ◽  
Karan Veer
Keyword(s):  
Risk Assessment ◽  
Gene Sequencing ◽  
Lessons Learned ◽  
World Health ◽  
Global Risk ◽  
The World ◽  
Global Risk Assessment ◽  
Health Organization ◽  
Very High ◽  
Breathing Problem

: It was 11 March 2020 when the World Health Organization (WHO) declared the name COVID-19 for coronavirus disease and also described it as a pandemic. Till that day 118,000 cases were confirmed of pneumonia with breathing problem throughout the world. At the start of New Year when COVID-19 came into knowledge a few days later, the gene sequencing of the virus was revealed. Today the number of confirmed cases is scary, i.e. 9,472,473 in the whole world and 484,236 deaths have been recorded by WHO till 26 June 2020. WHO's global risk assessment is very high [1]. The report is enlightening the lessons learned by India from the highly affected countries.

First Digital Intelligent Artificial Lift Production Optimization Technology in UAE Dual-String Gas Lift Well - Business Case and Implementation Plan

2019 ◽  
Author(s):  
Ahmed Alshmakhy ◽  
Khadija Al Daghar ◽  
Sameer Punnapala ◽  
Shamma AlShehhi ◽  
Abdel Ben Amara ◽  
...  
Keyword(s):  
Business Case ◽  
Production Optimization ◽  
Implementation Plan ◽  
Artificial Lift ◽  
Gas Lift

The Sanitary and Phytosanitary Agreement of the World Trade Organization: Debunking Its Reliance on Scientific Evidence and Reluctance to Endorse Potential Biotechnology Risks

2021 ◽  
pp. 1-17
Author(s):  
Muhammad ISLAM
Keyword(s):  
Risk Assessment ◽  
World Trade Organization ◽  
World Trade ◽  
Dispute Settlement ◽  
Scientific Evidence ◽  
Scientific Uncertainty ◽  
The World ◽  
Precautionary Measures ◽  
Phytosanitary Measures ◽  
Biotech Products

The World Trade Organization (WTO) Agreement on the Application of Sanitary and Phytosanitary Measures (SPS Agreement) relies on scientific evidence as a conclusive risk assessment criterion, which ignores the inherent limitations of science. This article highlights certain trade-restrictive effects of scientific evidence and comments on the Agreement’s aversions to precautionary measures and the consumer concern of the harmful effects of biotech products that may be necessary to protect public health and biosecurity in many WTO Member States. These measures and concerns have become pressing issues due to surging consumer awareness and vigilance concerning environmental protection and food safety. The Agreement is yet to overcome the weaknesses of its endorsed international standardising bodies, the problematic definition of scientific evidence and treatment of justification for scientific risk assessment methods and the implementation difficulties faced by most developing states. This article analyses these issues under the provisions of the Agreement and the interpretations of the WTO Dispute Settlement Body in disputes involving SPS matters, which fall short of addressing scientific uncertainty surrounding biotech products and their associated risks.

Actual Problems of the Safety and Reliability of the NPP Structures in Slovakia

2017 ◽  
Vol 738 ◽  
pp. 261-272 ◽  
Author(s):  
Juraj Kralik
Keyword(s):  
Risk Assessment ◽  
Numerical Methods ◽  
Probabilistic Analysis ◽  
Material Model ◽  
Safety Level ◽  
Concrete Cracking ◽  
The World ◽  
Safety And Reliability ◽  
Long Time ◽  
Calculated Model

The last accidents of the NPP in Chernobyl and Fukushima give us the new inspiration to verify the safety level of the NPP structures. This paper presents the new requirements to test of the safety and reliability of the NPP structures due to the last accidents in the world. The risk assessment to verify of the safety and reliability of the NPP structures based on probabilistic and nonlinear analysis is presented. The uncertainties of the loads level (long-time temperature and dead loads), the material model (concrete cracking and crushing, behaviour of the reinforcement and liner), degradation effects and other influences following from the inaccuracy of the calculated model and numerical methods were taken into account in the LHS method. The results of the deterministic and probabilistic analysis of the NPP structures are presented.

Numerical Simulation of Gas Lift Optimization Using Artificial Intelligence for a Middle Eastern Oil Field

2021 ◽  
Author(s):  
Mohammed Ahmed Al-Janabi ◽  
Omar F. Al-Fatlawi ◽  
Dhifaf J. Sadiq ◽  
Haider Abdulmuhsin Mahmood ◽  
Mustafa Alaulddin Al-Juboori
Keyword(s):  
Genetic Algorithm ◽  
Sensitivity Analysis ◽  
Middle Eastern ◽  
Optimization Technique ◽  
Injection Rate ◽  
Oil Field ◽  
Oil Fields ◽  
Reservoir Pressure ◽  
Artificial Lift ◽  
Gas Lift

Abstract Artificial lift techniques are a highly effective solution to aid the deterioration of the production especially for mature oil fields, gas lift is one of the oldest and most applied artificial lift methods especially for large oil fields, the gas that is required for injection is quite scarce and expensive resource, optimally allocating the injection rate in each well is a high importance task and not easily applicable. Conventional methods faced some major problems in solving this problem in a network with large number of wells, multi-constrains, multi-objectives, and limited amount of gas. This paper focuses on utilizing the Genetic Algorithm (GA) as a gas lift optimization algorithm to tackle the challenging task of optimally allocating the gas lift injection rate through numerical modeling and simulation studies to maximize the oil production of a Middle Eastern oil field with 20 production wells with limited amount of gas to be injected. The key objective of this study is to assess the performance of the wells of the field after applying gas lift as an artificial lift method and applying the genetic algorithm as an optimization algorithm while comparing the results of the network to the case of artificially lifted wells by utilizing ESP pumps to the network and to have a more accurate view on the practicability of applying the gas lift optimization technique. The comparison is based on different measures and sensitivity studies, reservoir pressure, and water cut sensitivity analysis are applied to allow the assessment of the performance of the wells in the network throughout the life of the field. To have a full and insight view an economic study and comparison was applied in this study to estimate the benefits of applying the gas lift method and the GA optimization technique while comparing the results to the case of the ESP pumps and the case of naturally flowing wells. The gas lift technique proved to have the ability to enhance the production of the oil field and the optimization process showed quite an enhancement in the task of maximizing the oil production rate while using the same amount of gas to be injected in the each well, the sensitivity analysis showed that the gas lift method is comparable to the other artificial lift method and it have an upper hand in handling the reservoir pressure reduction, and economically CAPEX of the gas lift were calculated to be able to assess the time to reach a profitable income by comparing the results of OPEX of gas lift the technique showed a profitable income higher than the cases of naturally flowing wells and the ESP pumps lifted wells. Additionally, the paper illustrated the genetic algorithm (GA) optimization model in a way that allowed it to be followed as a guide for the task of optimizing the gas injection rate for a network with a large number of wells and limited amount of gas to be injected.

Sign in / Sign up

Export Citation Format

Share Document