Oil Crops

2020 ◽  
Keyword(s):  
2020 ◽  
Vol 20 (2) ◽  
pp. 7-13
Author(s):  
G. Stankevych ◽  
L. Dmytrenko ◽  
A. Kats ◽  
V. Shpak

In the future, in Ukraine it is planned to increase the sown area for cereals, legumes and oilseeds, to increase the gross grain harvest to 80 million tons, and its export abroad was increased twice. Intensive construction in the southern ports of Ukraine of grain transshipment terminals with large metal silos will solve the problem of increasing grain export in the future. At these powerful terminals, the bulk of the grain comes mainly by rail, and is shipped to water. The aim of the work was to study the characteristics of the grain receiving from railway transport to the grain transshipment terminal of LLC “Ukrelevatorprom” in order to improve its works efficiency. The object of the study was the development of technology of grain receiving at the grain transshipment terminal; the subject of research is cereals, legume sand oil crops, as well as data from daily volumes of receiving and dispensing operations at the grain transshipment terminal of LLC “Ukrelevatorprom” for 2015-2016. The studies were carried out on the basis of processing data from the consignment notes for 2015-2016, according to which there was a summed amount of grain (net) daily transported by the railway. Further processing of the obtained data was carried out by a combined graphoanalytical method, for which, on the basis of tabular values for each studied year, the corresponding histograms and graphs were built and the necessary indicators were determined. Analysis of the structure of grain crops supplied by railway to LLC “Ukrelevatorprom” in 2015 and 2016 and their ratio showed that the main share was occupied by cereal crops (78.0 % and 73.1 % respectively), which were mainly represented by corn, share which was significantly dominated by other crops (wheat of various classes and barley) and amounted to 45.8 % and 44.5 %, respectively, which can be explained by its high demand in the international grain market, in which Ukraine occupies a leading position. Oilseeds (rapeseed) were taken in accordance with 19.1 % and 14.9 %, and legumes (soybeans) — 2.9 % and 12.0 %. An analysis of the timing of the unloading of grain wagons (hopper cars) showed that the total duration of this process, depending on the crops, averages 37...59 minutes. The longest steps for unloading wagons are to determine the grain quality indicators, especially rapeseed, and to spill grain from the wagons, therefore, to reduce their duration, it is necessary to form feeds of wagons with grain batches of the same quality and use more modern express analyzers to determine grain quality indicators, which will increase the productivity of the grain receiving line from the railway. According to the research results, the enterprise has the potential to increase by about 30 % the volume of grain intake. It was established that the periods of the grain receipt at the enterprise in 2015-2016 amounted to 349 and 353 days, respectively, the actual coefficients of the daily irregularity Kdaily for the grain receipt from the railway in these years are equal to 1.47 and 1.52, and the monthly irregularity Kmonth, respectively 1.33 and 1.21, does not exceed the standard values Kdaily = 2.5 and Kmonth= 2.0. This made it possible to clarify the database from the actual characteristics of the process of grain receiving by railway and can be used in design and verification calculations of equipment in technological lines for receiving grain from railway transport, and will contribute to increasing the efficiency of grain transshipment terminals. 


2019 ◽  
Vol 5 (1) ◽  
pp. 8-12
Author(s):  
Matkarim Ibragimov ◽  
◽  
Gulnoz Ergasheva

Author(s):  
V. М. Lukomets ◽  
S. V. Zelentsov

To improve the effectiveness of the soybeans and oil flax breeding, research to improve existing and develop new breeding methods are conducting in all-Russia Research institute of Oil Crops (Krasnodar). One of the improved methods for the soybean breeding, based on the use of sources of complexes of compensatory genes, is the CCG technology, which allows to create varieties with an increased yield of a heterotic level transmitted along the progeny for the entire life cycle of the variety. For the purpose of non-transgenic production of new traits, a theory of polyploid recombination of the genome (TPR) was formulated, which models the mechanism of the natural formation of polymorphism in the centers of origin of cultivated plants. On the basis of this theory, a method of breeding (TPR-technology) has been developed, which makes it possible to obtain recombinant reploids of soybeans and oil flax with an extended spectrum of traits. Of these reploids, the soybean lines with increased sucking force of the roots, providing high drought resistance, were distinguished; cold-resistant soybean lines, which stand in the phase of shoots of freezing to minus 5 °С; lines of oil flax with complete resistance to flax sickness of soil and high resistance to Fusarium; winter-hardy flax lines that withstand winter frosts down to minus 20–23 °С and ripen one and a half months earlier than spring sowings. Another original developed method is the ODCS-technology for isolating and selecting soybean genotypes with high resistance to fungal pathogens. The physiological basis of ODCS-technology is the blocking of osmotic nutrition of pathogenic fungi due to genetically determined increased osmotic pressure in the tissues of host plants. The practical implementation of CCG-, TPR- and ODKS-technologies in the selection process, allowed to create a whole series of soybean and oil flax varieties with improved or new traits.


Author(s):  
M Yu Gambotova ◽  
M A Bazgiev ◽  
Z M Tsitskiev ◽  
L Yu Kostoeva ◽  
F A Biteeva

2021 ◽  
Vol 659 (1) ◽  
pp. 012091
Author(s):  
A N Kshnikatkina ◽  
S A Kshnikatkin ◽  
P G Alenin ◽  
A A Shchanin ◽  
T Ya Prakhova ◽  
...  

1990 ◽  
Vol 44 (4) ◽  
pp. 462-462
Author(s):  
Dorothea Bedigian
Keyword(s):  

Author(s):  
Н. Зезин ◽  
М. Намятов

Исследования Уральского НИИСХ и опыт передовых хозяйств Свердловской области показывают, что для повышения эффективности и стабильности кормопроизводства необходимо в структуре кормовых культур увеличивать удельный вес высокобелковых, высокоэнергетических и засухоустойчивых культур, производить подсев многолетних трав ежегодно на площади не менее 60 тыс. га, а в перспективе 7080 тыс. га. За последние 7 лет (20112018 годы) площади люцерны в области увеличились в 2 раза (до 23 тыс. га), кукурузы по зерновой технологии в 2,4 раза (до 20,9 тыс. га) и масличных культур в 3,1 раза (до 30,8 тыс. га). Опыт СПК Килачёвский Ирбитского района показывает, что освоение научно обоснованных биологизированных севооборотов, прошедших изучение в стационарных опытах Уральского НИИСХ, позволяет ежегодно получать высокие и стабильные урожаи всех сельскохозяйственных культур. В этом хозяйстве каждая кормовая культура размещается в своём севообороте. В СПК Килачёвский и ряде других хозяйств Свердловской области большое значение придаётся возделыванию люцерны, кукурузы и масличных культур. Площадь этих культур в расчёте на одну корову мы назвали белковоэнергетическим коэффициентом (БЭК). Анализ показал тесную взаимосвязь между белковоэнергетическим коэффициентом и молочной продуктивностью. Так, в СПК Килачёвский в 2016 году при удое 10196кг БЭК был равен 1,25 в 2017 году удой достиг 10798кг, БЭК 1,43 в 2018 году соответственно 11493 кг и 1,47 при количестве коров 29002977 голов. According to the investigations conducted at the Ural Agricultural Research Institute and experience of the leading farms in the Sverdlovsk region high effectiveness and stability of Forage Production requires wide cultivation of droughtresistant crops rich in protein and energy as well as seeding over 60 thousand ha (in the future 7080 thousand ha) by perennial grasses annually. For the last 7 years (20112018) areas of alfalfa increased by 2 times (up to 23 thousand ha), grain maize by 2.4 times (up to 20.9 thousand ha), oil crops by 3.1 times (up to 30.8 thousand ha). SPK Kilachevskiy (agricultural production cooperative) reported that the use of approved crop rotations tested at the Ural Agricultural Research Institute resulted in annual high and stable yields of all the crops. SPK Kilachevskiy and other farms of the region widely grow alfalfa, maize and oil crops. Land area for the cultivation of these crops per one cow is called proteinenergy coefficient (PEC). Proteinenergy coefficient was shown to have a significant correlation with milk productivity. SPK Kilachevskiy reported that in 2016 PEC and milk yield reached 1.25 and 10196 kg in 2017 1.43 and 10798 kg in 2018 1.47 and 11493 kg, respectively under 29002977 cows.


2021 ◽  
Vol 37 (6) ◽  
pp. 1005-1014
Author(s):  
Guoliang Wei ◽  
Qingsong Zhang ◽  
Biao Wang ◽  
QingXi Liao

HighlightsThe seeder combined the plowing and rotating tillage to overcome the heavy soil and a large amount of straws.The plow could lift and turn the soil and straw before rotary tillage.The optimal working parameters of the seeder were obtained by orthogonal field experiments.Abstract. Rapeseed, one of the most important oil crops in China, is mainly planted in the mid-lower reaches of the Yangtze River. However, limited by the special long-term rice-rapeseed rotation, rotary tillage is applied in most of the planted areas apply instead of plow tillage, leading to a shallow arable layer. On the other hand, maintaining a high-quality seedbed for rapeseed becomes a challenge because a large amount of straw remains buried in the soil. As a solution, a rapeseed direct seeder that combines plow tillage and rotary tillage was designed. The structure of the plowing unit, whose key components were a lifting-turning plow and symmetrical plow, was analyzed based on the forming principle of the plow. Furthermore, a mechanical soil throwing model of the rotary tillage blade was built to determine the structural parameters. Then, the interaction between the rotary tillage unit and the lift-turning plow was analyzed. Finally, the performance and optimal parameters were evaluated by orthogonal field experiments. The seedbed after the operations indicated that the seeder could achieve the function of turning the soil and straw first and then rotating the soil with good passability, mixing the straw and the soil, flattening the surface of the seed bed, and stabilizing the tillage depth. Orthogonal experiments showed that the optimal working parameters of the seeder were as follows: the tillage depth was 180 mm, the equipment forward speed was 2.1 km/h, and the speed of the rotary tillage blade was 250 r/min. Under the optimal parameter combination, the power consumption of the seeder, the thickness of the tillage layer, the crop residue burial efficiency, the soil breakage efficiency, and the flatness of the seed bed surface were 30.48 kW, 231 mm, 90.88%, 93.26%, and 21.15 mm, respectively. The working performance of the seeder could meet the tillage requirements of rapeseed planting. Keywords: Direct seeder, Evaluation, Plow, Plowing-rotating combined tillage, Rapeseed.


Sign in / Sign up

Export Citation Format

Share Document