scholarly journals Adsorption of Amino Acids on Graphene: Assessment of Current Force Fields

Author(s):  
Siva Dasetty ◽  
John K. Barrows ◽  
Sapna Sarupria

<div> <div> <div> <p>We compare the free energies of adsorption (∆Aads) and the structural preferences of amino acids obtained using the force fields — Amberff99SB-ILDN/TIP3P, CHARMM36/modified-TIP3P, OPLS-AA/M/TIP3P, and Amber03w/TIP4P/2005. The amino acid–graphene interactions are favorable irrespective of the force field. While the magnitudes of ∆Aads differ between the force fields, the trends in the free energy of adsorption with amino acids are similar across the studied force fields. ∆Aads positively correlates with amino acid–graphene and negatively correlates with graphene–water interaction energies. Using a combination of principal component analysis and density-based clustering technique, we grouped the structures observed in the graphene adsorbed state. The resulting population of clusters, and the conformation in each cluster indicate that the structures of the amino acid in the graphene adsorbed state vary across force fields. The differences in the conformations of amino acids are more severe in the graphene adsorbed state compared to the bulk state for all the force fields. Our findings suggest that while the thermodynamics of adsorption of proteins and peptides would be described consistently across different force fields, the structural preferences of peptides and proteins on graphene will be force field dependent. </p> </div> </div> </div>


Author(s):  
Siva Dasetty ◽  
John K. Barrows ◽  
Sapna Sarupria

<div> <div> <div> <p>We compare the free energies of adsorption (∆Aads) and the structural preferences of amino acids obtained using the force fields — Amberff99SB-ILDN/TIP3P, CHARMM36/modified-TIP3P, OPLS-AA/M/TIP3P, and Amber03w/TIP4P/2005. The amino acid–graphene interactions are favorable irrespective of the force field. While the magnitudes of ∆Aads differ between the force fields, the trends in the free energy of adsorption with amino acids are similar across the studied force fields. ∆Aads positively correlates with amino acid–graphene and negatively correlates with graphene–water interaction energies. Using a combination of principal component analysis and density-based clustering technique, we grouped the structures observed in the graphene adsorbed state. The resulting population of clusters, and the conformation in each cluster indicate that the structures of the amino acid in the graphene adsorbed state vary across force fields. The differences in the conformations of amino acids are more severe in the graphene adsorbed state compared to the bulk state for all the force fields. Our findings suggest that while the thermodynamics of adsorption of proteins and peptides would be described consistently across different force fields, the structural preferences of peptides and proteins on graphene will be force field dependent. </p> </div> </div> </div>



Author(s):  
Siva Dasetty ◽  
John K. Barrows ◽  
Sapna Sarupria

<div> <div> <div> <p>We compare the free energies of adsorption (∆Aads) and the structural preferences of amino acids obtained using the force fields — Amberff99SB-ILDN/TIP3P, CHARMM36/modified-TIP3P, OPLS-AA/M/TIP3P, and Amber03w/TIP4P/2005. The amino acid–graphene interactions are favorable irrespective of the force field. While the magnitudes of ∆Aads differ between the force fields, the trends in the free energy of adsorption with amino acids are similar across the studied force fields. ∆Aads positively correlates with amino acid–graphene and negatively correlates with graphene–water interaction energies. Using a combination of principal component analysis and density-based clustering technique, we grouped the structures observed in the graphene adsorbed state. The resulting population of clusters, and the conformation in each cluster indicate that the structures of the amino acid in the graphene adsorbed state vary across force fields. The differences in the conformations of amino acids are more severe in the graphene adsorbed state compared to the bulk state for all the force fields. Our findings suggest that while the thermodynamics of adsorption of proteins and peptides would be described consistently across different force fields, the structural preferences of peptides and proteins on graphene will be force field dependent. </p> </div> </div> </div>



2018 ◽  
Author(s):  
Maximiliano Riquelme ◽  
Alejandro Lara ◽  
David L. Mobley ◽  
Toon Vestraelen ◽  
Adelio R Matamala ◽  
...  

<div>Computer simulations of bio-molecular systems often use force fields, which are combinations of simple empirical atom-based functions to describe the molecular interactions. Even though polarizable force fields give a more detailed description of intermolecular interactions, nonpolarizable force fields, developed several decades ago, are often still preferred because of their reduced computation cost. Electrostatic interactions play a major role in bio-molecular systems and are therein described by atomic point charges.</div><div>In this work, we address the performance of different atomic charges to reproduce experimental hydration free energies in the FreeSolv database in combination with the GAFF force field. Atomic charges were calculated by two atoms-in-molecules approaches, Hirshfeld-I and Minimal Basis Iterative Stockholder (MBIS). To account for polarization effects, the charges were derived from the solute's electron density computed with an implicit solvent model and the energy required to polarize the solute was added to the free energy cycle. The calculated hydration free energies were analyzed with an error model, revealing systematic errors associated with specific functional groups or chemical elements. The best agreement with the experimental data is observed for the MBIS atomic charge method, including the solvent polarization, with a root mean square error of 2.0 kcal mol<sup>-1</sup> for the 613 organic molecules studied. The largest deviation was observed for phosphor-containing molecules and the molecules with amide, ester and amine functional groups.</div>



1998 ◽  
Vol 4 (6) ◽  
pp. 407-418 ◽  
Author(s):  
P. Hernandez Orte ◽  
A. Guitart ◽  
V. Ferreira ◽  
J. Gracia ◽  
J. Cacho

The purpose of this work is to study the effect of maceration time (with and without pectolitic en zyme addition) on the concentrations of 18 amino acids found in must and wines of the Macabeo grape variety. The presence of enzymes had a significant effect on the relative composition of the amino acids. The maceration process, with or without enzymes, led to a decrease in amino acid con tent after 2 h of maceration. After 2 h the solid parts of the grape released amino acids into the must, with the maximum concentration reached after 6 h. A certain degree of correlation given by principal component analysis was observed between the concentration of valine, isoleucine and histidine present in the musts and the aromatic compounds in the wines related to the metabolism of the fatty acids (hexanoic acid, octanoic acid, ethyl octanoate, hexanoate and decanoate). For the wines, a high corre lation was found between valine and isobutanol and a lower value for valine with isoamyl alcohol and β-phenyl ethanol.



Agronomy ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1637
Author(s):  
Quintino Reis de Araujo ◽  
Guilherme Amorim Homem de Abreu Loureiro ◽  
Cid Edson Mendonça Póvoas ◽  
Douglas Steinmacher ◽  
Stephane Sacramento de Almeida ◽  
...  

Free amino acids in cacao beans are important precursors to the aroma and flavor of chocolate. In this research, we used inferential and explanatory statistical techniques to verify the effect of different edaphic crop conditions on the free amino acid profile of PH-16 dry cacao beans. The decreasing order of free amino acids in PH-16 dry cacao beans is leucine, phenylalanine, glutamic acid, alanine, asparagine, tyrosine, gamma-aminobutyric acid, valine, isoleucine, glutamine, lysine, aspartic acid, serine, tryptophan, threonine, glycine. With the exception of lysine, no other free amino acid showed a significant difference between means of different edaphic conditions under the ANOVA F-test. The hydrophobic free amino acids provided the largest contribution to the explained variance with 58.01% of the first dimension of the principal component analysis. Glutamic acid stands out in the second dimension with 13.09%. Due to the stability of the biochemical profile of free amino acids in this clonal variety, it is recommended that cacao producers consider the genotype as the primary source of variation in the quality of cacao beans and ultimately the chocolate to be produced.



Author(s):  
David Slochower ◽  
Niel Henriksen ◽  
Lee-Ping Wang ◽  
John Chodera ◽  
David Mobley ◽  
...  

<div><div><div><p>Designing ligands that bind their target biomolecules with high affinity and specificity is a key step in small- molecule drug discovery, but accurately predicting protein-ligand binding free energies remains challenging. Key sources of errors in the calculations include inadequate sampling of conformational space, ambiguous protonation states, and errors in force fields. Noncovalent complexes between a host molecule with a binding cavity and a drug-like guest molecules have emerged as powerful model systems. As model systems, host-guest complexes reduce many of the errors in more complex protein-ligand binding systems, as their small size greatly facilitates conformational sampling, and one can choose systems that avoid ambiguities in protonation states. These features, combined with their ease of experimental characterization, make host-guest systems ideal model systems to test and ultimately optimize force fields in the context of binding thermodynamics calculations.</p><p><br></p><p>The Open Force Field Initiative aims to create a modern, open software infrastructure for automatically generating and assessing force fields using data sets. The first force field to arise out of this effort, named SMIRNOFF99Frosst, has approximately one tenth the number of parameters, in version 1.0.5, compared to typical general small molecule force fields, such as GAFF. Here, we evaluate the accuracy of this initial force field, using free energy calculations of 43 α and β-cyclodextrin host-guest pairs for which experimental thermodynamic data are available, and compare with matched calculations using two versions of GAFF. For all three force fields, we used TIP3P water and AM1-BCC charges. The calculations are performed using the attach-pull-release (APR) method as implemented in the open source package, pAPRika. For binding free energies, the root mean square error of the SMIRNOFF99Frosst calculations relative to experiment is 0.9 [0.7, 1.1] kcal/mol, while the corresponding results for GAFF 1.7 and GAFF 2.1 are 0.9 [0.7, 1.1] kcal/mol and 1.7 [1.5, 1.9] kcal/mol, respectively, with 95% confidence ranges in brackets. These results suggest that SMIRNOFF99Frosst performs competitively with existing small molecule force fields and is a parsimonious starting point for optimization.</p></div></div></div>



2021 ◽  
Vol 33 (2) ◽  
pp. 46-53
Author(s):  
Kaizheng Zhang ◽  
Wenchi Wu ◽  
Wei Zou ◽  
Zhenhui Kang ◽  
Qin Yan ◽  
...  

An amino acid analyzer was used to detect free amino acids (FAA) in Mimai Qu rice wines (SMW and DMW) and control wine samples (Chinese rice wine [CRW] and Japanese sake [JNS]). It was found that CRW had the highest total amino acid (TAA) content (~2814 mg/L), followed by SMW (~2509 mg/L) and DMW (~1474 mg/L), while JNS had the least (~917 mg/L). Amino acid ratio coefficient method (SRCAA), linear regression method, cluster analysis (CA) and principal component analysis (PCA) were used for evaluating the nutritional value of amino acids in wine samples, giving similar results. SMW had the highest nutritional value, followed by CRW and DMW and JNS.



Author(s):  
Norio Kitadai ◽  
Kumiko Nishiuchi

The ubiquity of amino acids in carbonaceous meteorites has suggested that amino acids are widespread in the Universe, serving as a common class of components for the emergence of life. However, parameters for modeling amino acid polymerization at mineral–water interfaces remain limited, although the interfacial conditions inevitably exist on planets with surface liquid water. Here, we present a set of extended triple-layer model parameters for aspartate (Asp) and aspartyl-aspartate (AspAsp) adsorptions on ferrihydrite, anatase, and γ-alumina determined based on the experimental adsorption data. By combining the parameters with the reported thermodynamic constants for amino acid polymerization in water, the impacts of these minerals on Asp dimerization are calculable over a wide range of environmental conditions. It was predicted, for example, that ferrihydrite strongly increases the AspAsp/Asp equilibrium ratio in neutral to acidic pH; the ratio in the adsorbed state reaches 40% even from a low Asp concentration (0.1 mM) at pH 4. This percentage is approximately 5 × 107 times higher than that attainable without mineral (8.5 × 10–6%). Our exemplified approach enables us to screen wide environmental settings for abiotic peptide synthesis from a thermodynamic perspective, thereby narrowing down the geochemical situations to be explored for life’s origin on Earth and Earth-like habitable planets.



Sign in / Sign up

Export Citation Format

Share Document