scholarly journals Functional properties of composite flour: a review

Food Research ◽  
2020 ◽  
Vol 4 (6) ◽  
pp. 1820-1831
Author(s):  
Hasmadi M. ◽  
Noorfarahzilah M. ◽  
Noraidah H. ◽  
M.K. Zainol ◽  
M.H. Jahurul
Keyword(s):  
Wheat Flour ◽  
Functional Properties ◽  
Review Paper ◽  
Raw Materials ◽  
Low Cost ◽  
Food Products ◽  
Composite Flour ◽  
Oil Absorption ◽  
Composite Flours ◽  
Gelation Concentration

Incorporation of composite flour into wheat flour for bakery goods production is expected to produce an effect in the functional properties of the blended samples. Functional properties of composite flour have been studied in most of the developing countries which used and imported a large amount of wheat flour to fulfil the increasing number of consumers as the higher demand in the development of bakery and pastry products. In this review paper, the characteristics of composite flours were reviewed to determine the suitability of the raw materials to be used in the production of food products. The functional properties such as water and oil absorption capability, foam ability, emulsion capability, least gelation concentration, and particle size distribution might indicate the capability of the composite flour before proceeding to the development of food products were reviewed. The functionality of composite flour was found to be beneficial to enhance the variety of food products with acceptable appearance, organoleptic, nutrition, and low cost to fulfil consumer demands.

scholarly journals Functional and Pasting Properties of Composite Flours from Triticum durum, Digitaria exilis, Vigna unguiculata and Moringa oleifera Powder

2020 ◽  
pp. 40-49
Author(s):  
C. A. Orisa ◽  
S. U. Udofia
Keyword(s):  
Vigna Unguiculata ◽  
Triticum Durum ◽  
Moringa Oleifera ◽  
Pasting Properties ◽  
Composite Flour ◽  
Oil Absorption ◽  
Composite Flours ◽  
Leaf Powder ◽  
Gelation Concentration ◽  
Flour Blends

The objective of this study was to determine the functional and pasting properties of composite flours from Triticum durum (wheat), Digitaria exilis (acha), Vigna unguiculata (cowpea) flours and Moringa oleifera leaf powder. The flour samples were mixed in a four by four factorial, in complete randomized design (CRD) to formulate the composite blends at four different levels (25, 50, 75 and 100) which gave 16 samples. The statistical analysis of data collected was used to select five (5) generally accepted composite flour samples (wheat, acha, cowpea and moringa oleifera leaf powder flours) with ratio of 100:0:0:0, 75:25:0:0, 0:50:50:0, 50:23:25:2 and 75:25:0:0, respectively. The flour samples were analyzed for functional and pasting properties using standard methods. Results of the functional properties showed that water absorption capacity of the composite flour blend ranged from 0.87-1.11g/g, bulk density 0.39-0.42 g/ml, least gelation concentration 2.00-4.00%, solubility 19.46-25.35%, wettability 2.57-4.02min, oil absorption 1.61-1.79g/g and least gelation temperature 62.00-68.50oC. The functionality of the composite flours such as water and oil absorption capacities, least gelation concentration and bulk density were improved when cowpea was incoporated into the blends than for moringa oleifera leaf powder and acha flour. On the other hand, wettability and solubility of the flour blends were improved when acha was incorporated into the blend. Results of pasting properties showed that peak viscosity ranged from 73.04-385.79RVU, trough viscosity 57.96-341.42RVU, break down viscosity 15.08-44.38RVU, final viscosity 109.54-581.58RVU, set back viscosity 51.58-240.17RVU, pasting time 5.70-6.40min and pasting temperature 50.08oC-50.35oC. These properties were shown to be higher when cowpea was incorporated into the flour blends than for moringa oleifera leaf powder and acha flour. However, pasting properties of the composite flour blends were higher than 100% wheat flour. This result therefore showed that composite flour from wheat, acha, cowpea and Moringa oleifera leaf powder has improved functionality and high pasting properties than the individual wheat flour and will serve as a useful ingredient in food formulations such as in dough, soups and baked products.

scholarly journals The Effects of Watermelon Rind Flour on the Functional and Proximate Properties of Wheat Bread

2020 ◽  
Vol 45 (5) ◽  
Author(s):  
C. Imoisi ◽  
J.U. Iyasele ◽  
U.C. Michael ◽  
E.E. Imhontu
Keyword(s):  
Wheat Flour ◽  
Functional Properties ◽  
Absorption Capacity ◽  
Wheat Bread ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Watermelon Rind ◽  
Composite Flours ◽  
Swelling Capacity ◽  
Composite Bread

The present study was undertaken to develop bread from composite flours. Composite flours were prepared by blending wheat flour with watermelon rind flour in ratios of 100:0 (AB1), 90:10 (AB2), 80:20 (AB3), 70:30 (AB4) and 60:40 (AB5), respectively. This study was carried out to ascertain the effects of watermelon rind flour at different replacement levels (0%, 10%, 20%, 30%, 40%) on the proximate and functional properties of composite wheat bread. The results of proximate properties determination on wheat/flour blend gave low bulk densities of 0.54g/cm3 to 0.60g/cm3, high water absorption capacity of 2.389 to 3.044 g/g as well as a high swelling capacity of 5.764 to 7.610 g/g and a low oil absorption capacity of 1.608 to 2.150 g/g. The results of proximate composition of composite bread revealed an increase in % protein, % carbohydrate and % ash from 15.7% to 18.8%, 47.1% to 52.0% and 0.6% to 1.2% respectively and a subsequent decrease in % fat from 18.4% to 13.8. There was a reduction in energy density for composite bread. The functional properties of composite flours such as swelling capacity, water absorption capacity, oil absorption capacity and bulk density were increased with increase in the incorporation of watermelon rind flour with wheat flour. Thus, the results indicate that by incorporating watermelon rind flour, it is possible to enhance the nutritional quality, chemical and functional properties of bread.

scholarly journals Functional Properties of Tigernut and Cowpea Flour Blends

2020 ◽  
Vol 2 (6) ◽  
Author(s):  
Patience C. Obinna-Echem ◽  
Happiness I. Wachukwu-Chikaodi ◽  
Okwagwung A. Dickson
Keyword(s):  
Bulk Density ◽  
Wheat Flour ◽  
Functional Properties ◽  
Good Alternative ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Oil Absorption ◽  
Swelling Power ◽  
Cowpea Flour ◽  
Flour Blends

The pH and functional properties: water and oil absorption capacity, bulk density, solubility, swelling power and foaming capacity of tigernut and cowpea flour blends were determined. The flour blends were coded with the letters B, C, D, E, F, G and H for cowpea flour substitutions of 5, 10, 15, 20, 30, 40 and 50 % respectively. For comparison sample A1, A2 and A3 representing 100 % of wheat, tigernut and cowpea respectively, were also evaluated. Standard methods were used for all the analysis. pH of the flour samples varied significantly (P ≤ 0.05) from 5.60-6.23 for sample B (5 % cowpea flour substitution) and A2 (100% tiger nut flour) respectively. Water and oil absorption capacity varied significantly (P ≤ 0.05) from 1.00-2.90 ml/g and 0.39-1.38 ml/g respectively. Sample A1 (100% wheat flour) and Sample B (5% Cowpea: 95% tigernut flour) was significantly (P ≤ 0.05) the highest in water absorption capacity while sample A1 (% wheat flour) had the highest oil absorption capacity. Bulk density varied from 0.58 - 0.84 g/cm3. Although Cowpea flour (sample A3) had the highest bulk density, there was significant (P ≤ 0.05) decrease with increase in cowpea substitution. Swelling power and solubility ranged from 0.08-6.74 g/g and 8.00–67.35 % respectively. Sample A1 (% wheat flour) had significantly (P ≤ 0.05) the highest solubility and swelling power while Sample A3 (% cowpea flour) had the least. The functional properties of the tigernut-cowpea composite flour were comparable with that of the wheat flour, except for the swelling power that was significantly (P ≤ 0.05) higher for the wheat flour. The result showed that the composite tigernut-cowpea flour can be good alternative in the production of bakery products that would not require much swelling.

scholarly journals Functional Properties of Sausage Rolls Made from Cocoyam and Wheat Flour Enriched with Soybean Flour

2019 ◽  
Vol 3 (2) ◽  
pp. 39
Author(s):  
Peter-Ikechukwu, A. ◽  
Ibeabuchi, J.C. ◽  
Eluchie, C.N. ◽  
Agunwa, I.M. ◽  
Aneke, E.J. ◽  
...  
Keyword(s):  
Wheat Flour ◽  
Functional Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Soybean Flour ◽  
Emulsion Capacity ◽  
Significant Difference ◽  
Flour Blends

<p><em>Functional properties of sausage rolls made from cocoyam and wheat flour enriched with soybean flour was studied. Cocoyam cormels and soybean were processed into flour, which were later used to formulate composite flour blends, with wheat flour in the ratio of: 90:10:0 (control 1), 80:10:10, 70:10:20, 60:10:40, 50:10:30, respectively, while 0:10:90 served as control 2. The result of the functional properties showed variation in behavior. There were no significant difference (p?0.05) in pH, bulk density, swelling index, foam capacity and emulsion capacity of the flour samples while significant difference (p?0.05) existed in water absorption capacity, oil absorption capacity and wettability.</em></p>

scholarly journals Use of Non-Traditional Types of Flour in the Flour Culinary Production (Pancakes)

Food Industry ◽  
2020 ◽  
Vol 5 (4) ◽  
pp. 33-37
Author(s):  
Vladislav Tiunov ◽  
Olga Chugunova ◽  
Aleksandr Arisov
Keyword(s):  
Wheat Flour ◽  
Raw Materials ◽  
Food Additives ◽  
Control Sample ◽  
Food Products ◽  
Biologically Active ◽  
Optimal Dosage ◽  
Soya Flour ◽  
Complete Replacement ◽  
Biological Value

Currently, Strategy for Improving the Food Products Quality in the Russian Federation until 2030 identifies the need to develop new food products as one of the important state tasks; the quality improvement of raw materials used, the nutritional and biological value of finished products and expanding its range are an urgent area of scientific research. Flour culinary products are no exception. These products made from traditional wheat flour of the highest grade have low nutritional value, high calorie, lack of vitamins and minerals. In order to increase the biological value of flour culinary products, a man adds food additives and biologically active substances; uses non-traditional raw materials for the production. The article considers the possibility of using non-traditional flour types mixtures instead of wheat flour of the highest grade in the production of flour culinary products (pancakes). The researchers developed the optimal dosage for adding mixtures of rice and corn, rice and amaranth, rice and soya flour to the product formulations. They studied comprehensively the regulated indicators of product quality and safety: organoleptic, physical and chemical, microbiological; run the comparative analysis of samples from non-traditional types of flour with a control sample. The authors developed the pancakes technology in the form of baking it in a convection steamer with a complete replacement of wheat flour with a mixture of rice and corn, rice and amaranth, rice and soya flour. They compiled technological maps and formulated a technical document package on the products range.

scholarly journals Organoleptic Characteristics of Cookies from Sorghum Composites Flour

2017 ◽  
Vol 2 (6) ◽  
pp. 506
Author(s):  
Wulandari E. ◽  
Sukarminah E. ◽  
Lanti I. ◽  
Sufmawati F.
Keyword(s):  
Sweet Potato ◽  
Wheat Flour ◽  
Food Products ◽  
Partial Substitution ◽  
Composite Flour ◽  
Potato Flour ◽  
Sorghum Flour ◽  
Organoleptic Characteristics ◽  
Significant Difference ◽  
Sweet Potato Flour

Application of wheat flour in various food products has increased the import of wheat flour over years. The use of domestically grown crops like Sorghum (Sorghum bicolor L. Moench) could reduce the demand of wheat. Sorghum flour can be used in partial substitution with wheat flour for many food products, like cookies. The use of sorghum as cookies ingredient could be combined with other flours to get a composite flour. The purpose of this research was to obtain proportion of sorghum flour, sweet potato flour and soyabean flour that produce cookies with good organoleptic characteristics. The proportion of composite flour adequacy was calculated using a list of foodstuffs (DKBM).The research method was based on Experimental Method with Randomized Block Design (RBD) in twelve treatments and two repetitions. The treatments were proportion of sorghum flour (6 minutes, 8 minutes, 10 minutes of dehulling time), sweet potato flour, and soyabean flour. The results showed that cookies made with proportion of sorghum flour, sweet potato flour, and soyabean flour gave no significant difference in organoleptic characteristics (Overall, color, taste, aroma, and hardness).  The result also showed that the characteristics of the cookies were not affected by dehulling of sorghum grains but influenced by other ingredient than flour. Keywords: Sorghum, Sweet Potato Flour,  Soyabean Flour, Cookies, Sensory Properties

scholarly journals PRODUCTION AND COMPARATIVE QUALITY EVALUATION OF CHIN-CHIN SNACKS FROM MAIZE, SOYBEAN AND ORANGE FLESHED SWEET POTATO FLOUR BLENDS

2020 ◽  
Vol 4 (2) ◽  
pp. 300-307
Author(s):  
J. Ndife ◽  
K. S. Abasiekong ◽  
B. Nweke ◽  
A. Linus-Chibuezeh ◽  
V. C. Ezeocha
Keyword(s):  
Wheat Flour ◽  
Functional Properties ◽  
Vitamin B1 ◽  
Nutrient Content ◽  
Absorption Capacity ◽  
Food Sources ◽  
Composite Flours ◽  
Sensory Qualities ◽  
Flour Blends ◽  
Orange Fleshed Sweet Potato

Most snacks are prepared from basically cereal flours which are nutritionally inadequate. There is the need to complement the nutrient content of these snacks by varying the food sources. Chin-chin snacks were produced from composite flours of Maize, soybean and OFSP with the following formation; sample A (50%: 25%: 25%), B (25%: 25%: 50%), C (25%: 50%: 25%), D (0%: 50%: 50%) and E (50%: 50%: 0%). Wheat flour (100%) served as the control F. The flour bends were analysed for functional properties while the chin-chin snacks were analysed for their nutrient and sensory qualities. The result of functional properties of the flours showed that bulk density of wheat flour (F) was the highest (0.746 g/ml). OFSP flour enhanced the water absorption capacity of the flour blends. Flour blends with soybean recorded higher values in foam capacity (11.20 - 22.55%). In proximate composition, the moisture was low (3.80 – 4.80%) in the chin-chin. Higher fibre content (2.60 - 4.20%) was obtained in samples containing higher proportion (50%) of OFSP. Samples D (19.38%) and C (18.80%) with higher soybean, recorded higher protein values. The mineral and the vitamin contents of snacks from composite flours were higher than that of the control F. Vitamin B1, B2, B3 and β-carotene contents of the snacks were enhanced by OFSP. The sensory evaluation showed preference for snack F (100% wheat flour) followed by snack A (50% maize, 25% soybean and 25% OFSP). However, improved nutrient dense chin-chin snacks were produced from the composite flours.

Proximate composition, pasting and functional properties of composite flour blends from cassava and chia seeds flour

2021 ◽  
pp. 108201322110694
Author(s):  
Ashura Katunzi-Kilewela ◽  
Leonard MP Rweyemamu ◽  
Lilian D Kaale ◽  
Oscar Kibazohi ◽  
Roman M Fortunatus
Keyword(s):  
Functional Properties ◽  
Proximate Composition ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Peak Time ◽  
Swelling Capacity ◽  
Pasting Temperature ◽  
Gelation Concentration ◽  
Flour Blends

The study established the proximate composition, pasting, and functional properties of cassava flour (CF) blended with chia seeds flour (CSF). Composite flour was prepared by blending CF with CSF in the ratios of 95:05, 90:10, 85:15, 80:20, and 75:25 with CF and CSF used as controls, respectively. The effect of blending significantly (p < 0.05) increased protein, fat, fibre, and ash contents as CSF increased. On other hand, moisture and carbohydrate contents decreased significantly. Pasting properties of composite flour blends decreased significantly (p < 0.05) as the incorporation of CSF increased and a noticeable change was observed for composite flour (75:25) except for peak time and pasting temperature. Functional properties of water absorption capacity (WAC) of CSF were significantly different with CF and composite flour blends. Oil absorption capacity (OAC) of CF and CSF were significantly different, while the composite flour blends had varied OAC due to the inclusion of the different amounts of CSF. The swelling capacity (SC) of CF and CSF were not significantly different, but composite flour blends were significantly different from both CSF and CF. The least gelation concentration (LGC) and bulk density (BD) increased significantly as chia seeds increased. Increased concentration of chia CSF in the composite flour blends showed to alter the functional properties. This study recommends composite flour 75:25 for processing semiliquid products like porridge due to reduced pasting properties values that may be associated with increased energy density compared to CF.

scholarly journals Technological Properties of Wheat/Trifoliate Yam (Dioscorea dumetorum) Hardened Tubers Composite Flours

2015 ◽  
Vol 2015 ◽  
pp. 1-8
Author(s):  
Véronique Josette Essa’a ◽  
Roger M. Mbanga Baleba ◽  
Gabriel Nama Medoua
Keyword(s):  
Wheat Flour ◽  
Functional Properties ◽  
Protein Quality ◽  
Deformation Energy ◽  
Falling Number ◽  
Bread Making ◽  
Homogeneous Cluster ◽  
Composite Flours ◽  
Rupture Pressure ◽  
Hagberg Falling Number

The ability of trifoliate hardened-yam flours to partially substitute wheat flour in food formulations was assessed. Three varieties of hardened-yam flour were incorporated in wheat flour in proportions of 0, 10, 20, 30, 40, and 50% (w/w). Samples were evaluated for protein content, Zeleny sedimentation index, Hagberg falling number, functional properties (WAC, WSI, and OAC), and some rheological properties including dough rupture pressure (P), extensibility (L), stability (P/L), and deformation energy (W). Results showed that trifoliate hardened-yam flours do not have acceptable baking properties as pictured by the low Zeleny sedimentation index and the low Hagberg falling number. Protein quality (Zeleny index, 31) of wheat flour helped to compensate gluten deficit of yam flours, but the amylasic activity determined by the Hagberg falling number could not be adjusted, which resulted in a loss of extensibility (L) of the paste at 10% substitution. Multivariate analysis of experimental data regrouped wheat flour and all wheat/hardened-yam treated with kanwa composite flours in one homogeneous cluster. Although wheat/hardened-yam treated with kanwa composite flours had physicochemical and functional properties similar to wheat, the inadequate diastasic activity makes them inappropriate for bread making, marking the strongest influence of that parameter.

Sign in / Sign up

Export Citation Format

Share Document