THE INFLUENCE OF SMALL DEFECTS ON THE FATIGUE LIMIT OF 1045 STEEL

2019 ◽  
Author(s):  
Daniel Oliveira ◽  
Artur Dias ◽  
Cainã Bemfica de Barros ◽  
Fábio Castro ◽  
Roberto Costa
Keyword(s):  
Fatigue Limit ◽  
1045 Steel

Theoretical justifi cation for use of combined methods for hardening of surfaces of machine parts in order to control their fretting resistance

2020 ◽  
pp. 339-342
Author(s):  
V.F. Bez’yazychny ◽  
M.V. Timofeev ◽  
R.V. Lyubimov ◽  
E.V. Kiselev
Keyword(s):  
Surface Layer ◽  
Fatigue Limit ◽  
Surface Hardening ◽  
Theoretical Justification ◽  
Hardening Process ◽  
Subsequent Application ◽  
Machine Parts ◽  
Combined Methods

The theoretical justification for the hardening process of the surface layer of machine parts for combined methods of surface hardening with subsequent application of strengthening coatings, as well as reducing or increasing the fatigue limit due to the fretting process is presented.

Fuzzy Modeling to Simulate Surface Roughness in CNC Turning of AISI 1045 Steel

2011 ◽  
Vol 486 ◽  
pp. 262-265
Author(s):  
Amit Kohli ◽  
Mudit Sood ◽  
Anhad Singh Chawla
Keyword(s):  
Experimental Data ◽  
Surface Roughness ◽  
Process Parameters ◽  
Fuzzy Model ◽  
Fuzzy Modeling ◽  
Cnc Machine ◽  
Model Based ◽  
Aisi 1045 Steel ◽  
Aisi 1045 ◽  
1045 Steel

The objective of the present work is to simulate surface roughness in Computer Numerical Controlled (CNC) machine by Fuzzy Modeling of AISI 1045 Steel. To develop the fuzzy model; cutting depth, feed rate and speed are taken as input process parameters. The predicted results are compared with reliable set of experimental data for the validation of fuzzy model. Based upon reliable set of experimental data by Response Surface Methodology twenty fuzzy controlled rules using triangular membership function are constructed. By intelligent model based design and control of CNC process parameters, we can enhance the product quality, decrease the product cost and maintain the competitive position of steel.

scholarly journals Evaluation of the characteristics of an AISI 1045 steel quenched in different concentration of polymer solutions of polyvinylpyrrolidone

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Eduardo da Rosa Vieira ◽  
Luciano Volcanoglo Biehl ◽  
Jorge Luis Braz Medeiros ◽  
Vagner Machado Costa ◽  
Rodrigo Jorge Macedo
Keyword(s):  
Microstructural Characterization ◽  
Exchange Capacity ◽  
X Ray Diffraction ◽  
Thermal Exchange ◽  
The Core ◽  
Aisi 1045 Steel ◽  
Aisi 1045 ◽  
Quench Hardening ◽  
Polymeric Solutions ◽  
1045 Steel

AbstractQuench hardening aims at the microstructural transformation of steels in order to improve hardness and mechanical strength. The aim phase is, in most cases, the martensite. It is necessary to heat the material until it obtains its austenitization and quenching by immersion in a fluid. Currently, it is common to use watery polymeric solutions in this procedure. These fluids, which are the mixture of polymers in water, vary their thermal exchange capacity depending on the concentrations applied. The increase in concentration minimizes the removal of heat from the part, reducing the formation capacity of martensite, and developing a lower hardness and strong steel. In this work, microstructural characteristics and properties of AISI 1045 steel quenched in solutions based on polyvinylpyrrolidone (PVP) in 10, 15, 20, and 25% concentration were evaluated. The microstructural characterization quantified the percentage of the phases in each concentration, demonstrating a reduction of martensite as the concentrations were high. The investigation of the samples by x-ray diffraction confirmed the absence of austenite retained in the material. Furthermore, a microhardness scale between the core and the surface was constructed, in which a reduction gradient of the indices of this property towards the core of the sample was evidenced.

scholarly journals Study on the Dissolution and Precipitation Behavior of Self-Designed (NbTi)C Nanoparticles Addition in 1045 Steel

Metals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 184
Author(s):  
Hongwei Zhu ◽  
Haonan Li ◽  
Furen Xiao ◽  
Zhixiang Gao
Keyword(s):  
Tensile Strength ◽  
Electron Microscope ◽  
Optical Microscope ◽  
Cast Steels ◽  
Uniform Dispersion ◽  
The Matrix ◽  
Thermo Calc Software ◽  
Particle Strengthening ◽  
1045 Steel ◽  
Addition Amount

Self-designed (NbTi)C nanoparticles were obtained by mechanical alloying, predispersed in Fe powder, and then added to 1045 steel to obtain modified cast steels. The microstructure of cast steels was investigated by an optical microscope, scanning electron microscope, X-ray diffraction, and a transmission electron microscope. The results showed that (NbTi)C particles can be added to steels and occur in the following forms: original ellipsoidal morphology nanoparticles with uniform dispersion in the matrix, cuboidal nanoparticles in the grain, and microparticles in the grain boundary. Calculations by Thermo-Calc software and solubility formula show that cuboidal (NbTi)C nanoparticles were precipitated in the grain, while the (NbTi)C microparticles were formed by eutectic transformation. The results of the tensile strength of steels show that the strength of modified steels increased and then declined with the increase in the addition amount. When the addition amount was 0.16 wt.%, the modified steel obtained the maximum tensile strength of 759.0 MPa, which is an increase of 52% compared with to that with no addition. The hardness of the modified steel increased with the addition of (NbTi)C nanoparticles. The performance increase was mainly related to grain refinement and the particle strengthening of (NbTi)C nanoparticles, and the performance degradation was related to the increase in eutectic (NbTi)C.

Sign in / Sign up

Export Citation Format

Share Document