scholarly journals Research on the Abilities of Community Education Study Tour Instructors

2021 ◽  
Vol 5 (12) ◽  
pp. 134-141
Author(s):  
Honghui Fei
Keyword(s):  
Community Education ◽  
Three Dimensional ◽  
Lifelong Education ◽  
Governance System ◽  
High Quality ◽  
Education Governance ◽  
Study Tour ◽  
Education Study ◽  
Research Ability ◽  
Ability Index

Community education study tour instructors are important action elements of community education tours. It is necessary to sort out the abilities of community education study tour instructors as well as construct a scientific and reasonable professional ability index system for community education study tour instructors, so as to promote the high-quality development of community education as well as the modernization of lifelong education governance system and governance ability. Based on the practice of community education in Jiangsu and the basic theory of pedagogy, this paper puts forward five core vocational abilities of community education, including travel education and teaching ability, curriculum development ability, management and research ability, training and guidance ability, as well as study tour guarantee ability. This paper attempts to sort out the ability of community education study tour instructors through research and analysis. A three-dimensional and multi-dimensional framework of community education instructors’ ability has been constructed to provide a path for the professional development of community education study tour instructors.

An experience of elaboration and implementation of systems of slag-forming mixtures mechanized feeding into CCM moulds

2020 ◽  
Vol 76 (10) ◽  
pp. 994-1003
Author(s):  
S. P. Eron’ko ◽  
M. Yu. Tkachev ◽  
E. V. Oshovskaya ◽  
B. I. Starodubtsev ◽  
S. V. Mechik
Keyword(s):  
Economic Effect ◽  
Three Dimensional ◽  
Movable Part ◽  
High Quality ◽  
Working Zone ◽  
Fine Material ◽  
Mixing Chamber ◽  
Field Samples ◽  
Technical Solutions ◽  
Feeding Systems

Effective application of slag-forming mixtures (SFM), being fed into continuous castingg machine (CCM) moulds, depends on their even distribution on the melt surface. Manual feeding of the SFM which is widely usedd does not provide this condition, resulting in the necessity to actualize the work to elaborate systems of SFM mechanized feedingg into moulds of various types CCM. A concept of the designing of a system of SFM feeding into CCM moulds presented with the ratte strictly correspondent to the casting speed and providing formation of an even layer of fine material of given thickness on the whoole surface of liquid steel. The proposed methods of designing of the SFM mechanized feeding systems based on three-dimensional computer simulation with the subsequent verification of the correctness of the adopted technical solutions on field samples. Informattion is presented on the design features of the adjusted facilities intended for continuous supply of finely granulated and powder mixtuures on metal mirror in moulds at the production of high-quality billets, blooms and slabs. Variants of mechanical and pneumo-mechaanical SFM supply elaborated. At the mechanical supply the fine material from the feeding hopper is moved at a adjusted distance bby a rigid horizontally located screw. At the pneumo-mechanical supply the metered doze of the granular mixture is delivered by a sshort vertical screw, the lower part of which is located in the mixing chamber attached from below to the hopper and equipped with ann ejector serving for pneumatic supply of the SFM in a stream of transporting gas. It was proposed to use flexible spiral screws in the ffuture facilities of mechanical SFM feeding. It will enable to eliminate the restrictions stipulated by the lack of free surface for locatiion of the facility in the working zone of the tundish, as well as to decrease significantly the mass of its movable part and to decreaase the necessary power of the carriage moving mechanism driver. The novelty of the proposed technical solutions is protected by thhree patents. The reduction of 10–15% in the consumption of slag-forming mixtures during the transition from manual to mechanizeed feeding confirmed. The resulting economic effect from the implementation of technical development enables to recoup the costs inncurred within 8–10 months.

scholarly journals Generation and Annotation of Simulation-Real Ship Images for Convolutional Neural Networks Training and Testing

2021 ◽  
Vol 11 (13) ◽  
pp. 5931
Author(s):  
Ji’an You ◽  
Zhaozheng Hu ◽  
Chao Peng ◽  
Zhiqiang Wang
Keyword(s):  
Neural Networks ◽  
Convolutional Neural Networks ◽  
Image Annotation ◽  
Three Dimensional ◽  
Image Data ◽  
Detection Algorithm ◽  
Simulation Software ◽  
High Quality ◽  
Annotation Method ◽  
Detection Of Objects

Large amounts of high-quality image data are the basis and premise of the high accuracy detection of objects in the field of convolutional neural networks (CNN). It is challenging to collect various high-quality ship image data based on the marine environment. A novel method based on CNN is proposed to generate a large number of high-quality ship images to address this. We obtained ship images with different perspectives and different sizes by adjusting the ships’ postures and sizes in three-dimensional (3D) simulation software, then 3D ship data were transformed into 2D ship image according to the principle of pinhole imaging. We selected specific experimental scenes as background images, and the target ships of the 2D ship images were superimposed onto the background images to generate “Simulation–Real” ship images (named SRS images hereafter). Additionally, an image annotation method based on SRS images was designed. Finally, the target detection algorithm based on CNN was used to train and test the generated SRS images. The proposed method is suitable for generating a large number of high-quality ship image samples and annotation data of corresponding ship images quickly to significantly improve the accuracy of ship detection. The annotation method proposed is superior to the annotation methods that label images with the image annotation software of Label-me and Label-img in terms of labeling the SRS images.

scholarly journals The fossil record of whip spiders: the past of Amblypygi

PalZ ◽  
2021 ◽  
Author(s):  
Carolin Haug ◽  
Joachim T. Haug
Keyword(s):  
Fossil Record ◽  
3D Imaging ◽  
Three Dimensional ◽  
Dorsal Shield ◽  
Stereo Images ◽  
Geological Time ◽  
High Quality ◽  
The Past ◽  
Over Time

AbstractWhip spiders (Amblypygi), as their name suggests, resemble spiders (Araneae) in some aspects, but differ from them by their heart-shaped (prosomal) dorsal shield, their prominent grasping pedipalps, and their subsequent elongate pair of feeler appendages. The oldest possible occurrences of whip spiders, represented by cuticle fragments, date back to the Devonian (c. 385 mya), but (almost) complete fossils are known from the Carboniferous (c. 300 mya) onwards. The fossils include specimens preserved on slabs or in nodules (Carboniferous, Cretaceous) as well as specimens preserved in amber (Cretaceous, Eocene, Miocene). We review here all fossil whip spider specimens, figure most of them as interpretative drawings or with high-quality photographs including 3D imaging (stereo images) to make the three-dimensional relief of the specimens visible. Furthermore, we amend the list by two new specimens (resulting in 37 in total). The fossil specimens as well as modern whip spiders were measured to analyse possible changes in morphology over time. In general, the shield appears to have become relatively broader and the pedipalps and walking appendages have become more elongate over geological time. The morphological details are discussed in an evolutionary framework and in comparison with results from earlier studies.

THE VISIBLE ANIMAL PROJECT: A THREE-DIMENSIONAL, DIGITAL DATABASE FOR HIGH QUALITY THREE-DIMENSIONAL RECONSTRUCTIONS

1999 ◽  
Vol 40 (6) ◽  
pp. 611-616 ◽  
Author(s):  
Peter BOTtcher ◽  
Johann Maierl ◽  
Thomas Schiemann ◽  
Christian Glaser ◽  
Renate Weller ◽  
...  
Keyword(s):  
Three Dimensional ◽  
High Quality ◽  
Digital Database

scholarly journals TightCap: 3D Human Shape Capture with Clothing Tightness Field

2022 ◽  
Vol 41 (1) ◽  
pp. 1-17
Author(s):  
Xin Chen ◽  
Anqi Pang ◽  
Wei Yang ◽  
Peihao Wang ◽  
Lan Xu ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Ground Truth ◽  
Data Driven ◽  
Optimization Scheme ◽  
High Quality ◽  
3D Scan ◽  
Multi Stage ◽  
Geometry Image

In this article, we present TightCap, a data-driven scheme to capture both the human shape and dressed garments accurately with only a single three-dimensional (3D) human scan, which enables numerous applications such as virtual try-on, biometrics, and body evaluation. To break the severe variations of the human poses and garments, we propose to model the clothing tightness field—the displacements from the garments to the human shape implicitly in the global UV texturing domain. To this end, we utilize an enhanced statistical human template and an effective multi-stage alignment scheme to map the 3D scan into a hybrid 2D geometry image. Based on this 2D representation, we propose a novel framework to predict clothing tightness field via a novel tightness formulation, as well as an effective optimization scheme to further reconstruct multi-layer human shape and garments under various clothing categories and human postures. We further propose a new clothing tightness dataset of human scans with a large variety of clothing styles, poses, and corresponding ground-truth human shapes to stimulate further research. Extensive experiments demonstrate the effectiveness of our TightCap to achieve the high-quality human shape and dressed garments reconstruction, as well as the further applications for clothing segmentation, retargeting, and animation.

Centrifugal Compressor Volute Design Software

2003 ◽  
Author(s):  
Guy Phuong ◽  
Sylvester Abanteriba ◽  
Paul Haley ◽  
Philippe Guillerot
Keyword(s):  
Gas Turbines ◽  
Computer Aided Design ◽  
Three Dimensional ◽  
Grid Generation ◽  
Design Tool ◽  
Design System ◽  
High Quality ◽  
Complete Control ◽  
Functional Relationships ◽  
Analysis Process

Volutes are widely used in centrifugal compressors for industrial processes, refrigeration systems, small gas turbines and gas pipelines. However, large costs associated with the volute design and analysis process can be reduced with the introduction of a software design system that ties together both geometry creation and mesh generation having the ultimate intent of improving stage efficiency. Computational Fluid Dynamics (CFD) has become an integral part of engineering design. High quality grids need to be produced as part of the analysis process. Engineers of different expertise may be required to determine volute design constraints and parameters, produce the geometry, and generate a high quality grid. The current research aims to develop and demonstrate a volute design tool that allows design engineers the ability to easily and efficiently generate volute geometry and automate grid generation by means of geometrical constraints using functional relationships. The approach was outlined in [1]. Visualization of volute geometry can be in two-dimensional (2D) or three-dimensional (3D) modes. Control of the diffuser upstream of the scroll, the scroll itself and the conic are totally integrated in the design system. The user can position the conic anywhere in space and control the shape of the conic centroid curve, therefore having complete control over the development of the tongue region. The program will output data for automated grid generation where user can control resulting grid properties. Once the desired design configuration has been determined, the users can output the geometry surfaces and wireframes to a Computer Aided Design (CAD) package for production. Every little detail is also incorporated into the software from volute draft angle, discharge conic centroid shape, to cross section fillet radii. Upon entering all the required constraints and parameters of the volute, the geometry is created in seconds. Grids can be generated in minutes accommodating geometrical changes thus reducing the bottlenecks associated with geometry/grid generation for CFD applications.

Computer Aided Design of a Pattern and Risers for Casting Processes: Part 1

1991 ◽  
Vol 113 (1) ◽  
pp. 59-66
Author(s):  
Jong Cheon Park ◽  
Kunwoo Lee
Keyword(s):  
Computer Aided Design ◽  
Unique Feature ◽  
Three Dimensional ◽  
Automatic Design ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
High Quality ◽  
Commercial Practice ◽  
Interactive Computer Program ◽  
Aided Design

An interactive computer program has been developed to design a pattern and risers for the production of castings of high quality. In our system, the user models the shape of a final product by using the system’s modeling capability, a pattern is generated in a three-dimensional model by eliminating the holes and adding shrinkage allowances and drafts, the proper riser is created automatically, and they are united together to yield a three-dimensional model of this portion of a mold assembly. The mold can be completed after the runners and the gating systems are designed, modeled, and united which will be described in Part 2 of this work. The unique feature of this work is a realization of an automatic design of the pattern and risers by integrating the modeling capabilities and the design equations used in commercial practice.

scholarly journals Astrometric Tests of Galactic Evolution

1995 ◽  
Vol 166 ◽  
pp. 251-258
Author(s):  
Gerard Gilmore
Keyword(s):  
Phase Space ◽  
Three Dimensional ◽  
Galactic Evolution ◽  
Critical Test ◽  
Current Standard ◽  
High Quality ◽  
Stellar Velocity ◽  
Formation And Evolution ◽  
Standard Models

There are many fundamental aspects of Galactic structure and evolution which can be studied best or exclusively with high quality three dimensional kinematics. Amongst these we note as examples determination of the orientation of the stellar velocity ellipsoid, and the detection of structure in velocity-position phase space. The first of these is the primary limitation at present to reliable and accurate measurement of the Galactic gravitational potential. The second is a critical test of current standard models of Galactic formation and evolution.

Sign in / Sign up

Export Citation Format

Share Document