scholarly journals Bioconversion on Wastewater of Soybeans using Microbial Fuel Cell

2019 ◽  
Vol 1 (1) ◽  
Author(s):  
Yohanes A Cahyono ◽  
Tilana Madurani ◽  
Widya F Azzahra ◽  
Retno A S Lestari
Keyword(s):  
Wastewater Treatment ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Electrical Energy ◽  
Electricity Production ◽  
Anode Chamber ◽  
Cathode Chamber ◽  
Renewable Electricity ◽  
Electric Currents ◽  
Washing Wastewater

Microbial fuel cell (MFC) is a technology developed to obtain new sources of renewable energy to produce electricity.  It can be an alternative for wastewater treatment and bioenergy producers of renewable electricity. This method requires bacteria to convert substrate in wastewater into electrical energy. The mechanism of MFC were oxidation of substrate by bacteria to produce electrons and protons at the anode. The proton in anode chamber passes through a membrane exchange to the cathode chamber, however the electrons couldn’t through. It caused accumulation of electron in anode chamber and then both of electrode had a potential difference, so electron in anode chamber passed through membrane exchange to cathode chamber. In this study used dual-chambers reactors with each compartment having 8 cm × 10 cm × 10 cm of dimensions and 5 mm of thickness. This study was subjected to evaluate the performance of MFC in soybean washing wastewater treatment with bacteria of EM4 to analyze the potentials production of electricity energy. The focus of this study was to evaluate the effect of time to electricity. MFC system was observed for 40 hours, measurement of voltages and electric currents performed every 4 hours. The results showed that there was potential of electricity production from soybean wastewater treatment by MFC. The maximum electricity reached in soybean wastewater media were voltage 441 mV (at 24 h), the electric currents 170 µA and the power density 51, 35 mW/m2 (at 24 h after acclimatization). Increasing of time effect to decreasing of electricity produced.Keywords: bioenergy, electricity, microbial fuel cell, membrane, wastewater soybean

Continuous Flow Microbial Fuel Cell for Organic Wastewater Treatment

2013 ◽  
Vol 777 ◽  
pp. 92-95
Author(s):  
Wei Ping Liu ◽  
Xia Fei Yin
Keyword(s):  
Wastewater Treatment ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Continuous Flow ◽  
Removal Rate ◽  
Maximum Output Power ◽  
Maximum Output ◽  
Anode Chamber ◽  
Cathode Chamber ◽  
Organic Wastewater

A continuous flow double chamber microbial fuel cell (MFC) for wastewater treatment was constructed. Anaerobic activated sludge was used as bacterial source and simulated organic wastewater was used as substrate. Effluent of anode chamber was used directly as influent of the cathode chamber. The aerobic microorganisms could degrade organic matters further. The electricity production and organic wastewater treatment of the MFC were studied. The results show that the wastewater chemical oxygen demand (COD) of the total removal rate was 74.1%~77.45%, the anode chamber in which the removal rate of COD is 32.2%~35.3%, and COD removal efficiency of aerobic biological treatment in the cathode chamber was 60.2%~66.7%. The continuous flow system could improve the removal rate further. The maximum current density of MFC was 1.56 mAm-2, the maximum output power was 24.336 mWm-2.

EXPERIMENTAL STUDY OF BIOELECTRICITY-MICROBIAL FUEL CELL FOR ELECTRICITY GENERATION: PERFORMANCE CHARACTERIZATION AND CAPACITY IMPROVEMENT

2017 ◽  
Vol 79 (5-2) ◽  
Author(s):  
Zul Hasrizal Bohari ◽  
Nur Asyhikin Azhari ◽  
Nuraina Nasuha Ab Rahman ◽  
Mohamad Faizal Baharom ◽  
Mohd Hafiz Jali ◽  
...  
Keyword(s):  
Organic Matter ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Electrical Power ◽  
Electrical Energy ◽  
Sewage Water ◽  
Electricity Production ◽  
Sample Type ◽  
Series Of Experiments ◽  
The Right

Energy trending lately shown the need of new possible renewable energy. This paper studies about the capability and capacity generating of electricity by using Bio-electricity-Microbial Fuel Cell (Bio-MFC). Bio-MFC is the device that converts chemical energy to electrical energy by using microbes that exist in the sewage water. The energy contained in organic matter can be converted into useful electrical power. MFC can be operated by microbes that transfer electrons from anode to cathode for generating electricity. There are two major goals in this study. The first goal is to determine the performance characteristics of MFCs in this application. Specifically we investigate the relationship between the percentages of organic matter in a sample results in higher electricity production of MFCs power by that sample. As a result, the sewage (wastewater) chosen in the second series experiment because the sewage (wastewater) also produced the highest percentage of organic matter which is around 10%. Due to these, the higher percentage of organic matter corresponds to higher electricity production. The second goal is to determine the condition under which MFC work most efficiently to generating electricity. After get the best result of the combination for the electrode, which is combination of zinc and copper (900mV),the third series of experiments was coducted, that show the independent variable was in the ambient temperature. The reasons of these observations will be explained throughout the paper. The study proved that the electricity production of MFC can be increased by selecting the right condition of sample type, temperature and type of electrode. 

scholarly journals The effects of biofilm and selective mixed culture on the electricity outputs and wastewater quality of tempe liquid waste based microbial fuel cell

REAKTOR ◽  
2018 ◽  
Vol 18 (2) ◽  
pp. 84
Author(s):  
Tania Surya Utami ◽  
Rita Arbianti ◽  
M Mariana ◽  
Nathania Dwi Karina ◽  
Vifki Leondo
Keyword(s):  
Wastewater Treatment ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Mixed Culture ◽  
Biofilm Formation ◽  
Formation Time ◽  
Electricity Production ◽  
Gram Negative Bacteria ◽  
Treatment Unit ◽  
Gram Negative

Microbial Fuel Cell (MFC) technology is highly prospective to be developed because it could be utilized as the alternative electricity sources and simultaneously as the wastewater treatment unit using microorganism as catalyst. Industrial Tempe wastewater has the potential to be used as MFC substrate since it still contains high nutrition for microbe and could pollute the environment if it disposed before being processed first. This study focused on investigating the effect of selective mixed culture addition and biofilm formation on the electricity production and the wastewater treatment aspects with tubular single chamber membranless reactor and industrial Tempe wastewater substrate. The result showed that, with the addition of selective mixed culture, the optimum electricity production obtained with addition of 1 ml gram-negative bacteria with increase in electricity production up to 92.14% and average voltage of 17.91 mV, while the optimum decreased levels of COD and BOD obtained with addition of 5 ml gram-negative bacteria which are 29.32% and 51.32%. On the biofilm formation experiment, optimum electricity production obtained from biofilm formation time for 14 days with increase in electricity production up to 10-folds and average voltage of 30.52 mV, while the optimum decreased levels of COD and BOD obtained from biofilm formation time for 7 days which are 18.2% and 35.9%.Keywords : biofilm, Microbial Fuel Cell, selective mixed culture, Tempe wastewater, tubular reactor

scholarly journals Microalgae Microbial Fuel Cell (MMFC) using Chlorella vulgaris and “Batik” Wastewater as Bioelectricity

2021 ◽  
Vol 226 ◽  
pp. 00032
Author(s):  
Nadiyah Faizi Polontalo ◽  
Falvocha Alifsmara Joelyna ◽  
Abdullah Malik Islam Filardli ◽  
Hadiyanto Hadiyanto ◽  
Zainul Akmar Zakaria
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Chlorella Vulgaris ◽  
Alternative Energy ◽  
Human Growth ◽  
Electrical Energy ◽  
Anode Chamber ◽  
Graphite Electrodes ◽  
Environmental Friendly ◽  
Metabolic Activities

Nowadays, Indonesia is faced with an increase in human growth, and followed by increasing electricity demand. One of the environmental friendly alternative energy that can solve this problem is microbial fuel cell, which utilizes organic matter as a substrate of bacteria in carrying out its metabolic activities to produce electricity. In this study, investigated the electrical energy produced by Microalgae Microbial Fuel Cell (MMFC) using Chlorella vulgaris and “Batik” wastewater. This study aims to assess the performance of the MMFC system based on the influence of yeast (8 g L−1 and 4 g L−1), “Batik wastewater” concentration (50 % and 100 %), and graphite electrodes (1:1 and 2:2). The MMFC system was carried out by filling anode chamber with “Batik” wastewater and the cathode with C. vulgaris. MMFC simulation was operated for 7 d. Concentration of 100 % “Batik” wastewater and 2:2 number of electrodes gave the best result in MMFC with voltage 0.115 Volt, algae absorbance 0.666. The COD decreased from 824 mg L−1 to 752 mg L−1 after the MMFC. The addition of 8 g L−1 yeast gave the optimum of bioelectricity production reached 0.322 Volt and the microalgae grew until the absorbance reached 1.031.

scholarly journals Wastewater Treatment and Electricity Production in a Microbial Fuel Cell with Cu–B Alloy as the Cathode Catalyst

Catalysts ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 572 ◽  
Author(s):  
Paweł P. Włodarczyk ◽  
Barbara Włodarczyk
Keyword(s):  
Wastewater Treatment ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Microbial Fuel Cells ◽  
Oxygen Demand ◽  
Electricity Production ◽  
Cathode Catalyst ◽  
Similar Reduction ◽  
Fuel Cell Operation

The possibility of wastewater treatment and electricity production using a microbial fuel cell with Cu–B alloy as the cathode catalyst is presented in this paper. Our research covered the catalyst preparation; measurements of the electroless potential of electrodes with the Cu–B catalyst, measurements of the influence of anodic charge on the catalytic activity of the Cu–B alloy, electricity production in a microbial fuel cell (with a Cu–B cathode), and a comparison of changes in the concentration of chemical oxygen demand (COD), NH4+, and NO3– in three reactors: one excluding aeration, one with aeration, and during microbial fuel cell operation (with a Cu–B cathode). During the experiments, electricity production equal to 0.21–0.35 mA·cm−2 was obtained. The use of a microbial fuel cell (MFC) with Cu–B offers a similar reduction time for COD to that resulting from the application of aeration. The measured reduction of NH4+ was unchanged when compared with cases employing MFCs, and it was found that effectiveness of about 90% can be achieved for NO3– reduction. From the results of this study, we conclude that Cu–B can be employed to play the role of a cathode catalyst in applications of microbial fuel cells employed for wastewater treatment and the production of electricity.

scholarly journals Microbial Fuel Cell with Ni–Co Cathode Powered with Yeast Wastewater

Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 3194 ◽  
Author(s):  
Paweł Włodarczyk ◽  
Barbara Włodarczyk
Keyword(s):  
Wastewater Treatment ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Sewage Treatment ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Electricity Production ◽  
High Concentration ◽  
Yeast Wastewater

Wastewater originating from the yeast industry is characterized by high concentration of pollutants that need to be reduced before the sludge can be applied, for instance, for fertilization of croplands. As a result of the special requirements associated with the characteristics of this production, huge amounts of wastewater are generated. A microbial fuel cell (MFC) forms a device that can apply wastewater as a fuel. MFC is capable of performing two functions at the same time: wastewater treatment and electricity production. The function of MFC is the production of electricity during bacterial digestion (wastewater treatment). This paper analyzes the possibility of applying yeast wastewater to play the function of a MFC (with Ni–Co cathode). The study was conducted on industrial wastewater from a sewage treatment plant in a factory that processes yeast sewage. The Ni–Co alloy was prepared by application of electrochemical method on a mesh electrode. The results demonstrated that the use of MFC coupled with a Ni–Co cathode led to a reduction in chemical oxygen demand (COD) by 90% during a period that was similar to the time taken for reduction in COD in a reactor with aeration. The power obtained in the MFC was 6.1 mW, whereas the volume of energy obtained during the operation of the cell (20 days) was 1.27 Wh. Although these values are small, the study found that this process can offer an additional level of wastewater treatment as a huge amount of sewage is generated in the process. This would provide an initial reduction in COD (and save the energy needed to aerate wastewater) as well as offer the means to generate electricity.

scholarly journals Investigation of the lamination of electrospun graphene-poly(vinyl alcohol) composite onto an electrode of bio-electro-Fenton microbial fuel cell

2017 ◽  
Vol 7 ◽  
pp. 184798041772742 ◽  
Author(s):  
Yi-Ta Wang ◽  
Yuan-Kuo Wang
Keyword(s):  
Electron Microscopy ◽  
Wastewater Treatment ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Power Density ◽  
Vinyl Alcohol ◽  
Poly Vinyl Alcohol ◽  
Reactive Black 5 ◽  
Cathode Chamber ◽  
Fenton System

The bio-electron-Fenton system integrates microbial fuel cell and Fenton process into a single system to destroy the organic and bio-refractory contaminants in wastewater. Its performance is closely dependent on the sufficient electron supplement by the oxidation process in anode chamber and the reduction process in cathode chamber. This article presents a novel cathode of a bio-electron-Fenton system which can simultaneously achieve good electron supplement and the wastewater treatment in cathode chamber. The cathode consists of indium-tin-oxide conductive glass on which layers of graphene-poly(vinyl alcohol) composite are sprayed by electrospinning. The material characterization is verified by Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. The voltage, current, and power density of the system are verified by cyclic voltammetry. The wastewater treatment is verified by dye decolorization. With the addition ratio of 4 wt% graphene, the system achieves the optimal power density of 74.1 mW/m2, open-circuit voltage of 0.42 V, and the decolorization of reactive black 5 of 60.25%. By constant-resistance discharge testing within three-cycle, the system can stably supply a maximum voltage of 0.41 V or above. Hence, the proposed electrospun graphene-poly(vinyl alcohol) composite cathode electrode can not only improve the power-supply efficiency but also enhance the efficiency of wastewater treatment.

scholarly journals Microbial Fuel Cell and its Efficiency in Treating Wastewater - a Novel Technique for Wastewater Treatment

2018 ◽  
Vol 7 (3.12) ◽  
pp. 69
Author(s):  
B Antony Fantin ◽  
S Ramesh ◽  
J S.Sudarsan ◽  
P Vanamoorthy Kumaran
Keyword(s):  
Wastewater Treatment ◽  
Fuel Cells ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Microbial Fuel Cells ◽  
Large Scale ◽  
Electric Energy ◽  
Electrical Energy ◽  
Organic Content ◽  
Good Energy

Due to depletion of coal and other natural fuel there is an urgent need to find eco-friendly and workable technology for alternate energy. Microbial fuel cells is considered as assuringmethod to extract energy from various sources of wastewater and to generate electricity. But, due to practical limits, MFCs are still unsuitable to meet high power demands. Since wastewater contains several contaminants including organic substances, therefore, generation of electric energy from wastewater using MFC can offer an alternate solution for electricity issue as well as to reduce environmental pollution. Microbial fuel cells harvest electrical energy from wastewater with the help of microorganisms present within the wastewater. The energy confined in organic matter converted in to useful electric current. In Microbial Fuel Cell electrons from the microorganisms transfer from a reduced electron donor to an electron acceptor at a higher electrochemical potential. The study highlights that wastewater with high organic content found to be more effective and it also gives good energy production. If the same concept implemented in large scale it can help in achieving sustainable development and it helps in achieving 3R formula in the process of wastewater treatment. 

Sign in / Sign up

Export Citation Format

Share Document