scholarly journals Comparison of the coronal marginal microleakage of tooth colored restorative materials.

2020 ◽  
Vol 27 (01) ◽  
pp. 11-15
Author(s):  
Syed Muhammad Awais ◽  
Muhammad Raza ◽  
Syed Umer Farooq ◽  
Sana Ahmad
Keyword(s):  
Glass Ionomer Cement ◽  
Control Group ◽  
Blue Dye ◽  
Glass Ionomer ◽  
Group Iii ◽  
Depth Measurement ◽  
Group I ◽  
Significant Difference ◽  
Restorative Materials ◽  
Group Ii

Objectives: To compare the coronal marginal microleakage three types of available tooth colored restorative materials. Study Design: This in vitro comparative experimental study. Setting: Department of Science of Dental Materials, Sardar Begum Dental College. Period: July 2017 to November 2017. Material & Methods: Marginal micro-leakage of three tooth colored dental restorative materials were evaluated. In this study 55 specimens were divided into five groups, three experimental and two control groups. For experimental groups (I, II, III), 15 specimens each were allocated while five specimens each were allocated to positive control and negative control group. Standard Class I cavities were restored using Self-cured Glass Ionomer (Shofu Inc Japan), Resin Modified Glass Ionomer Cement (Kavitan LC; Spofa Dental Kerr Company) and Posterior Composites (Filtek P60; 3M ESPE). After thermo cycling and immersion in 2% methylene blue dye solution, the teeth were sectioned and the dye penetration depth measurement was done for each specimen with a periodontal probe in mm with the aid of magnifying lens. Analysis of variance (ANOVA) was used to assess the significant difference in coronal marginal microleakage of different materials by using SPSS. Results: It was found that there was a statistically significant difference (p < 0.05) in the micro-leakage of Group II and Group III when compared with group I but no statistically significant difference in the micro-leakage values of Group II and Group III was observed. Conclusion: All the restorative materials were unable to prevent the microleakage completely. Filtek P60 displayed minimum mean microleakage followed by Kavitan LC while the mean microleakage of Self-cured shofu Glass Ionomer was found to be maximum.

Comparative evaluation of compressive strength of esthetic restorative materials

2018 ◽  
Vol 14 (1) ◽  
pp. 24
Author(s):  
Dr. Sazan Sherdil Saleem
Keyword(s):  
Compressive Strength ◽  
Testing Machine ◽  
Glass Ionomer Cement ◽  
Glass Ionomer ◽  
Group Iii ◽  
Group I ◽  
Significant Difference ◽  
Resin Modified Glass Ionomer ◽  
Restorative Materials ◽  
Ionomer Cement

The present study was aimed to evaluate and compare the compressive strength ofconventional glass ionomer cement with resin modified glass ionomer, compomer andmicrohybrid composite. A total of 40 specimens of esthetic restorative materials werefabricated using customized cylindrical teflon mould measuring 6mm height and 4mmdiameter and were grouped with ten specimens in each group, Group I: Conventionalglass ionomer cement (Fuji II). Group II: Resin modified glass ionomer (Fuji II LC).Group III: Compomer (Dyract AP) and Group IV: Microhybrid composite resin(Tetric Ceram).They were covered with Mylar strip and were cured using LED lightcuring unit. Compressive strength was evaluated using Universal testing machine. Theresult showed that there were a significant difference among the groups in whichTetric Ceram showed highest compressive strength and Fuji II showed the leastcompressive strength

scholarly journals Evaluation of Microleakage in Posterior Nanocomposite Restorations with Adhesive Liners

2015 ◽  
Vol 03 (02) ◽  
pp. 097-102
Author(s):  
Sandeep Reyal ◽  
Ashu Gupta ◽  
Bhanu Singh
Keyword(s):  
Class Ii ◽  
Blue Dye ◽  
Glass Ionomer ◽  
Significant Group ◽  
Group Iii ◽  
Flowable Composite ◽  
Group I ◽  
Significant Difference ◽  
Resin Modified Glass Ionomer ◽  
Group Ii

AbstractMicroleakage is the clinically detectable passage of bacteria, fluids, molecules or ions between a cavity wall and the restorative materials applied to it. This study was conducted to evaluate and compare the microleakage in Class II nanocomposite restorations, with resin-modified glass ionomer liner(group I), nanofilled flowable composite liner(group II) & without liner(group III). Thirty six non carious upper premolar teeth extracted for orthodontic purposes were selected. Standard class II cavities were prepared. The teeth were then randomly & equally divided into three groups with 12 teeth in each group. The teeth were subjected to thermocycling. After that apex of each tooth was sealed with acrylic resin and the teeth were painted with two coats of nail varnish, except for the area of 2 mm from the periphery of the restorations. The coated teeth were immersed in buffered (Ph 7) 0.5% methylene blue dye for 48 hours. Teeth were sectioned & observed under stereomicroscope of 10X magnification. At gingival level, Group I exhibited slightly lesser microleakage than group II but was not statistically significant. Group I showed no significant difference between microleakage at occlusal and gingival level (Z=1.732; P=0.083). However, in Group II and Group III, there was significantly greater microleakage at the gingival level (Z= 2.162 and 3.162; P=0.002 and 0.002, respectively). Both resin-modified glass ionomer and flowable composite can be used as liners under nano composite restorations as reduction in microleakage was comparable.

The Role of sFas in the Immune Escape Mechanism and Progression of Cancer Larynx

2009 ◽  
Vol 2 ◽  
pp. CMENT.S2565
Author(s):  
Amr A El Badry ◽  
Ismail Elmofty ◽  
Amira Helmy
Keyword(s):  
Serum Level ◽  
Buffy Coat ◽  
Control Group ◽  
Group Iii ◽  
Soluble Fas ◽  
Group I ◽  
Significant Difference ◽  
Cancer Larynx ◽  
The Mean ◽  
Group Ii

This work assess serum levels of soluble Fas form (sFas) in patients with different stages of laryngeal squamous cell carcinoma(LSCC) to investigate its prognostic significance. We correlate its levels with the morphological changes of peripheral blood cells via buffy coat examinatin. The study population included 70 patients clinically diagnosed and pathohistologically confirmed LSCC in addition to 20 healthy controls. According to TNM classification 33(47.1%) patients were in stage I (group I) and 24(34.3%) in stage II (group II), 13(18.5%) in stage III (group III). The results revealed that the mean serum level of sFas (pg/ml) in the control group was 51.2, in group I was 66.33, in group II was 81.33 and in group III was 112.45. Statistical analysis of the mean of sFas by ELISA test in the patients' groups in comparison to the control revealed a significant increase of both group II and III in comparison to the control group (P < 0.01) but there was no significant difference (P > 0.05) between group I in comparison to either the control or group II. There was a significant difference (P < 0.05) between group I in comparison to group III. LM examination revealed massive extent of the apoptotic cells in group III when compared to both group I and group II. EM examination of the buffy coat revealed apoptotic changes, mainly in the peripheral blood mononuclear cells (PBMNCs), represented by surface membrane ruffles and blebs with clumped nuclear chromatin and vacuolated cytoplasm. In conclusion, this study may help us to better understand one of the escape mechanisms in cancer larynx. This mechanism is represented by the significant increase in both the serum level of sFas and the morphological apoptotic changes that detected in PBMNCs. Soluble Fas may contribute to the progression of laryngeal cancer. It can be used as an attractive target for anticancer therapy and may be considered as a marker of disease progression and poor prognosis in laryngeal cancer.

scholarly journals EFFECTS OF TRAINING SIDE HOP OVER BARRIER WITH DUMBELL AND HEXAGON WITH DUMBELL ON LEG STRENGTH AND LEG POWER

2018 ◽  
Vol 2 (2) ◽  
pp. 46
Author(s):  
Nur Akbari ◽  
Oce Wiriawan ◽  
Nining Widyah Kusnanik
Keyword(s):  
Control Group ◽  
Percentage Increase ◽  
Design Data ◽  
Group Iii ◽  
Strength Group ◽  
Leg Strength ◽  
Group I ◽  
Significant Difference ◽  
Quasi Experimental ◽  
Group Ii

This study was conducted at 45 students of SMAN 1 Cerme with aged between 15-16 years old. Students were  divided into 3 groups. the type of research used quantitative with quasi-experimental approach. Instruments of this study were test of leg strength and leg power using Leg Dynamometer and  Jump MD. The research design used matching only design. Data was anlyzed using ANOVA. The results of the  research was found that training program side hop over  barrier with dumbell and hexagon with  dumbbell significantly increase at leg strength and leg power (Sig. 0.000 <α = 0.05). Group I, Group II and Group III had significant difference (Sig. 0.000 α = 0.005). Percentage increase in leg strength group 1 of 1,80% and leg  power of 15,49%. Percentage increase in leg strength group II of  1,68% and a power of 14,27% and whereas in the control group increase in leg strength was 1.67% power at 12.32%.It can be concluded that There was an increase in leg strength and leg power in each group after the training was given. In addition, there were differences among the three groups effects seen improved in leg strength and leg power through ANOVA, where the training side hop over barrier with dumbbell and hexagon with dumbell had increased in leg strength and leg   power. But side hop over barrier with dumbbell had more significant increased than hexagon with dumbbell. Key words: Side hop over with barrier dumbell,  hexagon with dumbell, leg strength and leg power.

scholarly journals A traditional way to combat against Streptococcus mutans

2016 ◽  
Vol 7 (1) ◽  
Author(s):  
Prabhakar A R ◽  
Rekhamani Maganti ◽  
Mythri P ◽  
Saraswathi V Naik
Keyword(s):  
Streptococcus Mutans ◽  
Curcuma Longa ◽  
Glass Ionomer Cement ◽  
Control Group ◽  
Age Group ◽  
Glass Ionomer ◽  
Group Iii ◽  
Group Ii ◽  
Group 5 ◽  
Ionomer Cement

Purpose: This study was conducted to evaluate and compare the antimicrobial activity of conventional Glass ionomer cement, Glass ionomer cement (GIC) with 0.1% (w/w) epigallocatechin-3-gallate (EGCG) and Glass ionomer cement with 1% (w/w) Curcuma longa against streptococcus mutans.Methods: Children of age group 5-9 years, irrespective of sex, race and socioeconomic status with at least 3 cavitated dentinal lesions in primary molars clinically involving occlusal surface suitable for ART were selected.The dentinal samples were collected three times from each carious tooth, viz. baseline (before excavation of caries), after hand excavation of caries and after 7 days of restoration. The dentinal samples were subjected to microbiological evaluation for Streptococcus mutans count.Results: Experimental groups (Group II and group III) showed statistically significant reduction in Streptococcus mutans counts compared to control group (Conventional Glass ionomer cement). Group II i.e. (Glass ionomer cement with 0.1% (w/w) EGCG) showed significant reduction than Group III i.e. (Glass ionomer cement with 1% (w/w) Curcuma longa).Conclusion: ART technique was successful in reducing the streptococcus mutans load in a carious cavity but significant numbers of residual microbes were still found to be present even after the carious tissue was removed. Restoration of the cavity using EGCG and turmeric modified GIC was able to markedly reduce the S.mutans counts compared to conventional GIC. 

scholarly journals An in vitro comparative Evaluation of Fracture Strength of Roots Instrumentated with Self-adjusting File and Reciproc Reciprocating File, with and without Obturation

2017 ◽  
Vol 1 (1) ◽  
pp. 20-25
Author(s):  
Pooja Kabra
Keyword(s):  
Fracture Strength ◽  
Comparative Evaluation ◽  
Group Iv ◽  
Control Group ◽  
Group V ◽  
Group Iii ◽  
Group I ◽  
Significant Difference ◽  
Group Ii

ABSTRACT Aim The purpose of this study was to evaluate the fracture strength of roots instrumented with the self-adjusting file (SAF; ReDent-Nova, Ra'anana, Israel) and the Reciproc reciprocating file and that were and were not obturated using the warm vertical lateral compaction technique. Materials and methods In total, 75 mandibular premolar teeth were sectioned at or below the cementoenamel junction to obtain roots 13 mm in length. The roots were balanced with respect to buccolingual and mesiodistal diameters and weight. They were distributed into four experimental groups and one control group (n = 15): No instrumentation (group I), instrumentation with SAF files but no obturation (group II), instrumentation with SAF files and obturated with warm vertical lateral compaction (group III), instrumentation with Reciproc File but no obturation (group IV), and instrumentation with Reciproc File and obturated with warm vertical lateral compaction (group V). AH Plus sealer (Dentsply DeTrey, Konstanz, Germany) was used along with gutta-percha points. One week later, a vertical load was applied to the specimen's canal until fracture occurred. Data were statistically analyzed using one-way analysis of variance (p = 0.05). Results The mean fracture load was 312.83 N for group I, 297.35 N for group II, 359.15 N for group III, 231.51 N for group IV, and 275.81 N for group V. Conclusion The fracture resistances exhibited a statistically significant difference between all the groups. Teeth instrumented by SAF exhibited a better fracture resistance. How to cite this article Tyagi S, Choudhary E, Kabra P, Chauhan R. An in vitro comparative Evaluation of Fracture Strength of Roots Instrumentated with Self-adjusting File and Reciproc Reciprocating File, with and without Obturation. Int J Clin Dent Res 2017;1(1):20-25.

scholarly journals Influence of Internal Thoracic Artery Harvesting on Sternal Osteoblastic Activity and Perfusion

Diagnostics ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 921
Author(s):  
Sergey Mamchur ◽  
Yuri Vecherskii ◽  
Tatiana Chichkova
Keyword(s):  
Coronary Artery ◽  
Internal Thoracic Artery ◽  
Bypass Graft ◽  
Control Group ◽  
Emission Computed Tomography ◽  
Osteoblastic Activity ◽  
Group Iii ◽  
Group I ◽  
Significant Difference ◽  
Group Ii

The purpose of this study was to assess the sternal osteoblastic activity and perfusion in the early period after a coronary artery bypass graft (CABG) using single-photon emission computed tomography (SPECT) and three-phasic dynamic scintigraphy (3PDS) with 99mTc methylene diphosphonate (MDP). Methods: The study group consisted of 57 male patients that were 57.3 ± 6.6 years of age. Thirty-six of them were randomized into two groups: in group I (n = 18), the internal thoracic artery (ITA) was skeletonized, and in group II (n = 18), the ITA was pedicled. All the patients in groups I and II underwent an off-pump CABG using 1.7 ± 0.3 grafts, including one anastomosis of the ITA to the left anterior descending coronary artery. The control group III (n = 21) consisted of patients that underwent mitral valve repair surgery, in whom the sternotomy without the ITA harvesting was performed. The 3PDS and SPECT of the thorax with 99mTc MDP were performed 2 weeks after surgery. Results: The sternal phosphates uptake in group I was approximately twice as high as in group II and approximately 1.5 times higher than in group III (p < 0.05). The MDP uptake asymmetry after the ITA skeletonization was the same as in the group with both intact ITAs. In contrast, after the pedicled ITA harvesting, the osteoblastic activity of the ipsilateral side of the sternum was lower than in the contralateral one. There was no statistically significant difference in scintillation count in the xiphoid process between groups I and II (p > 0.05); however, we observed a significant difference in the manubrium and body (p < 0.05). Conclusion: The main factor that improved the sternal perfusion after a CABG was the preservation of branches supplying the sternum using the skeletonization technique of ITA harvesting.

Antibacterial Activity of Triclosan Incorporated Glass Ionomer Cements – An in vitro Pilot Study

2010 ◽  
Vol 35 (2) ◽  
pp. 157-161 ◽  
Author(s):  
Sajad Sainulabdeen ◽  
Prasanna Neelakantan ◽  
Sindhu Ramesh ◽  
CV Subbarao
Keyword(s):  
Antibacterial Activity ◽  
Pilot Study ◽  
Glass Ionomer Cement ◽  
Diffusion Method ◽  
Control Group ◽  
Glass Ionomer ◽  
Group I ◽  
Significant Difference ◽  
Ionomer Cement

Objectives: The aim of this pilot study was to evaluate the antibacterial activity of glass ionomer cement impregnated with different concentrations (0.5%, 1.25% and 2.5%) of a non releasing bactericide –Triclosan (TC) against two common cariogenic bacteria – Lactobacillus acidophilus and Streptococcus mutans; and to compare Triclosan incorporated GIC with chlorhexidine (CHX) incorporated GIC (2.5%)in terms of antibacterial activity. Methods: Chlorhexidine or Triclosan were added to glass ionomer cement powder to achieve 2.5% CHX – GIC (positive control – Group II), 0.5%, 1.25% and 2.5% TC-GIC (experimental groups III, IV and V respectively) formulations. Restorative glass ionomer cement (Fuji IX GC –Group I) served as negative control. The powder and liquid were mixed and inserted into the wells punched in agar plates (10mm × 4mm). The agar diffusion method was used to determine the antibacterial activity of the cements after 1, 7 and 30 days. Mean values were compared between different study groups using One-way ANOVA and Tukey's HSD procedure at a significance level of 5%. Results: Triclosan incorporated GIC was more effective against L.acidophilus and S.mutans than Chlorhexidine incorporated GIC. Triclosan at a concentration of 2.5% was more effective than at lower concentrations. At all time periods studied, the maximum zone of inhibition against L.acidophilus was produced by Group V. Against S.mutans, on days 1,7 and 30, there was no significant difference between Groups II and IV (p&gt;0.05), while the other groups showed significant differences. Conclusion: The use of triclosan as an antibacterial additive in GIC holds promise and further clinical research is needed in this direction.

scholarly journals Influence of disinfecting agents on the spatial dimensions of alginate mass impressions

2020 ◽  
Vol 74 ◽  
pp. 36-41
Author(s):  
Marcin Szerszeń ◽  
Michał Tyrajski ◽  
Daniel Surowiecki ◽  
Wojciech Poniewierski ◽  
Bartłomiej Górski
Keyword(s):  
Dimensional Stability ◽  
Control Group ◽  
Group Iii ◽  
Group I ◽  
Significant Difference ◽  
Spatial Dimensions ◽  
Group Ii ◽  
Large Groups

Disinfection of dental impressions is a compulsory procedure performed in order to break the chain of infection. Disinfectants used for this purpose are divided into two large groups. These are ready-to-use disinfectants applied directly over the surface of the impression in the form of a spray and concentrates, which are used to prepare a solution in which the impressions are immersed for a specific period of time. This study aims to evaluate the influence of disinfectants on spatial dimensions of alginate mass impressions. Ninety cubic impressions were prepared using metal matrixes with external dimensions of 28 x 28 mm. Each impression was measured in two planes. The impressions were divided into three equinumerous sets of 30: Group I was disinfected with Zeta 7 Spray (n = 30), Group II was disinfected with Zeta 7 Solution (n = 30), and the control Group III (n = 30). The dimensions of the samples were measured in two planes after 24 (T1) and 120 (T2) hours. The obtained data was analysed statistically. The dimensions of the samples after 24 and 120 hours in the first group were significantly different from those of the control group and the differences were statistically significant (p <0.05). There was no statistically significant difference between the second and the control group after 24 and 120 hours. Ready-to-use disinfectants influence the dimensional stability of alginate-mass impressions. The time between taking the impression and preparation of the cast should be considered while choosing the disinfecting agent.

scholarly journals Differences in surface roughness of enamel after whey-extract application and CPP-ACP in post extracoronal-tooth bleaching

2018 ◽  
Vol 4 (1) ◽  
pp. 15
Author(s):  
Afiatul Mukarromah ◽  
Irfan Dwiandhono ◽  
Dian Noviyanti Agus Imam
Keyword(s):  
Surface Roughness ◽  
Artificial Saliva ◽  
Enamel Surface ◽  
Tooth Bleaching ◽  
Control Group ◽  
Group Iii ◽  
Group I ◽  
Significant Difference ◽  
Group Ii ◽  
Bleaching Treatment

Demineralization is a process of partial or full tooth mineral loss which caused by acidic environment, for example the side effect of extracoronal bleaching treatment. Demineralization increases enamel surface roughness which leads plaque accumulation. Whey extract and calcium phosphopeptide-amorphous calcium phophate (CPP-ACP) contain calcium and phosphate that can stop the demineralization through remineralization process. This study aimed to determine the differences of enamel surface roughness after whey extract and CPP-ACP application post- extracoronal bleaching. Experimental laboratory with pre- and post-test control group design was performed on 24 first maxillary premolars which devided into 3 groups. On group I, specimens were immersed in artificial saliva. Specimens in group II were immersed in whey extract meanwhile specimens were immersed in CPP-ACP on group III. Whey extract and CPP-ACP immersions were conducted 10 minutes every 12 hours for 15 days. The enamel surface roughness test was performed twice, after extracoronal bleaching treatment and after 15 days remineralization agent application. This study result indicated significant differences between group I and group II and between group I and group III (p<0.05), but there was no significant difference between group II and group III (p>0.05). This study showed whey extract decreased more enamel surface roughness than CPP-ACP but the difference was not significant statistically. So, whey extract and CPP-ACP showed similar remineralization potential.

Sign in / Sign up

Export Citation Format

Share Document