A Study on the Pseudo-Second-Order Kinetic Equation for the Adsorption of Methylene Blue onto Nitric Acid-Treated Rice Husk: Comparison of Linear Methods

2018 ◽  
Vol 8 (6) ◽  
Author(s):  
Yu-Ting Huang ◽  
Li-Chiun Lee ◽  
Ming-Cheng Shih
Keyword(s):  
Methylene Blue ◽  
Nitric Acid ◽  
Kinetic Equation ◽  
Rice Husk ◽  
Second Order ◽  
Order Kinetic ◽  
Pseudo Second Order ◽  
Order Kinetic Equation

scholarly journals Molybdenum Trioxide: Efficient Nanosorbent for Removal of Methylene Blue Dye from Aqueous Solutions

Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2295 ◽  
Author(s):  
Souad Rakass ◽  
Hicham Oudghiri Hassani ◽  
Mostafa Abboudi ◽  
Fethi Kooli ◽  
Ahmed Mohmoud ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Aqueous Solutions ◽  
Removal Efficiency ◽  
Molybdenum Trioxide ◽  
Second Order ◽  
Blue Dye ◽  
Order Kinetic ◽  
Methylene Blue Dye ◽  
Removal Capacity ◽  
Pseudo Second Order

Nano Molybdenum trioxide (α-MoO3) was synthesized in an easy and efficient approach. The removal of methylene blue (MB) in aqueous solutions was studied using this material. The effects of various experimental parameters, for example contact time, pH, temperature and initial MB concentration on removal capacity were explored. The removal of MB was significantly affected by pH and temperature and higher values resulted in increase of removal capacity of MB. The removal efficiency of Methylene blue was 100% at pH = 11 for initial dye concentrations lower than 150 ppm, with a maximum removal capacity of 152 mg/g of MB as gathered from Langmuir model. By comparing the kinetic models (pseudo first-order, pseudo second-order and intraparticle diffusion model) at various conditions, it has been found that the pseudo second-order kinetic model correlates with the experimental data well. The thermodynamic study indicated that the removal was endothermic, spontaneous and favorable. The thermal regeneration studies indicated that the removal efficiency (99%) was maintained after four cycles of use. Fourier Transform Infrared (FTIR) and Scanning Electron Microscopy (SEM) confirmed the presence of the MB dye on the α-MoO3 nanoparticles after adsorption and regeneration. The α-MoO3 nanosorbent showed excellent removal efficiency before and after regeneration, suggesting that it can be used as a promising adsorbent for removing Methylene blue dye from wastewater.

scholarly journals Methylene Blue Dye Removal from Aqueous Media Using Activated Carbon Prepared by Lotus Leaves: Kinetic, Equilibrium and Thermodynamic Study

2021 ◽  
Vol 68 (2) ◽  
pp. 363-373
Author(s):  
Roya Salahshour ◽  
Mehdi Shanbedi ◽  
Hossein Esmaeili
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Sorption Process ◽  
Second Order ◽  
Blue Dye ◽  
Order Kinetic ◽  
Methylene Blue Dye ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Lotus Leaves

In the present work, methylene blue was eliminated from aqueous solution using activated carbon prepared by lotus leaves. To perform the experiments, batch method was applied. Also, several analyses such as SEM, FTIR, EDAX and BET were done to determine the surface properties of the activated carbon. The results showed that the maximum sorption efficiency of 97.59% was obtained in initial dye concentration of 10 mg/L, pH of 9, adsorbent dosage of 4 g/L, temperature of 25 °C, contact time of 60 min and mixture speed of 400 rpm. Furthermore, the maximum adsorption capacity was determined 80 mg/g, which was a significant value. The experimental data was analyzed using pseudo-first order, pseudo-second order and intra-particle diffusion kinetic models, which the results showed that the pseudo-second order kinetic model could better describe the kinetic behavior of the sorption process. Also, the constant rate of the pseudo-second order kinetic model was obtained in the range of 0.0218–0.0345 g/mg.min. Moreover, the adsorption equilibrium was well described using Freundlich isotherm model. Furthermore, the thermodynamic studies indicated that the sorption process of methylene blue dye using the activated carbon was spontaneous and exothermic.

scholarly journals Preparation of Modified nano-SiO2 by Bismuth and Iron as a novel Remover of Methylene Blue from Water Solution

2017 ◽  
Vol 61 (3) ◽  
Author(s):  
Farhad Salimi ◽  
Keivan Tahmasobi ◽  
Changiz Karami ◽  
Alireza Jahangiri
Keyword(s):  
Methylene Blue ◽  
Contact Time ◽  
Water Solution ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Order Kinetic ◽  
Freundlich Isotherms ◽  
Pseudo Second Order ◽  
Adsorption Treatment ◽  
Dyes Adsorption

Modified nano-silica with Bismuth and Iron adsorbent was synthesized to be used as an effective adsorbent material for methylene blue (MB) removal from water solution. The prepared samples were characterized using SEM, FTIR, XRD and TEM. The effect of experimental parameters such as pH, contact time and initial concentration on adsorption treatment were studied. Results indicated that the optimum conditions for maximum <strong>adsorption</strong> of 20 mg/L MB <strong>were:</strong> contact time of 20 minutes, pH= 5-6 and 8 gr/L adsorbent, the remaining MB in solution was 1.75%. Langmuir and Freundlich isotherms were employed to model the experimental results and the Freundlich isotherm was the best-fitting models for the experiment results. The kinetic data were also analyzed through pseudo-first-order and pseudo-second-order models. The pseudo-second-order kinetic model well depicted the kinetics of dyes adsorption on adsorbent.

scholarly journals Transformation of residual biomass into adsorbent materials: Applications to treatment of liquid effluents

2019 ◽  
Vol 9 (1) ◽  
pp. 1-11
Author(s):  
Samia Glissi ◽  
Meriem Tarbaoui ◽  
Laila Makouki ◽  
Khadija Legrouri ◽  
Hassan Hannache ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Phosphoric Acid ◽  
Correlation Coefficient ◽  
Chemical Activation ◽  
Second Order ◽  
Order Kinetic ◽  
Residual Biomass ◽  
Pseudo Second Order ◽  
The Impact ◽  
Adsorbent Materials

In this work, some adsorbent materials were prepared from residual biomass, which constitutes a real hazard for the environment and human health. So, in order to valorize this vegetal resource, a process of transformation was studied. The residual biomass was turned into adsorbent materials under the effect of chemical activation with phosphoric acid which allows the development of a large pore in the activated materials. The optimization of the conditions for the elaboration of our adsorbents was realized by experimental design by evaluating some parameters (percentage of phosphoric acid, temperature and time of activation) and their effects on the responses (capacity of adsorption of methylene blue, adsorbent yield), these parameters were selected after a screening study. The activation of our residual biomass was effected with 60% of phosphoric acid in 225°C while 115 min. The studied biomass was characterized by different physic-chemical methods (Differential Thermal Analysis /Thermogravimetric Analysis (DTA/TGA), Scanning Electron Microscopy (SEM), Raman and X-Ray Diffraction (XRD)); the results of characterization show the presence of the excellent textural and structural properties. The application of the best adsorbent in the removal of textile dyes (methylene blue) from aqueous solutions was studied. The impact of various parameters such as contact time, pH and concentration on the removal was evaluated by batch method. The adsorption isotherms were studied using Langmuir and Freundlich isotherm models. Langmuir isotherm provided the best fit to the equilibrium data with a correlation coefficient equal to 0.998. This result shows the presence of monolayer adsorption. The experiments demonstrated that the removal of methylene blue followed the pseudo-second-order kinetic model. The correlation coefficient is consistent and equal to unity, and the experimental qe value (44.17) was agreed with the calculated qe value (45.45) of pseudo-second-order then the value of pseudo-first-order which confirm a chemisorption process. The obtained results revealed that the elaborated material is an effective adsorbent for the removal of methylene blue.

scholarly journals Comparison of novel Ziziphus lotus adsorbent and industrial carbon on methylene blue removal from aqueous solutions

2018 ◽  
Vol 78 (10) ◽  
pp. 2055-2063
Author(s):  
Asmaa Msaad ◽  
Mounir Belbahloul ◽  
Samir El Hajjaji ◽  
Abdeljalil Zouhri
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Aqueous Solutions ◽  
Low Cost ◽  
Sorption Process ◽  
Second Order ◽  
Order Kinetic ◽  
Industrial Carbon ◽  
Freundlich Isotherms ◽  
Pseudo Second Order

Abstract In this work, the use of a novel low-cost adsorbent derived from Ziziphus lotus (ZL) and industrial carbon (IC) has been successfully applied to the removal of methylene blue (MB) from aqueous solutions. The efficiency of this material was studied through Lagergren pseudo-first-order and pseudo-second-order kinetic models. The process for the novel activated carbon and the IC were best represented by the pseudo-second-order rate model. Langmuir and Freundlich isotherms were used to describe the sorption equilibrium data. The Langmuir model turned out to be the most adequate and maximum capacities were measured to be 833.33 and 142.85 mg.g−1 for ZL activated carbon and IC from Sigma Aldrich, respectively. The thermodynamic study revealed that the sorption process is spontaneous and endothermic for the two adsorbents. To explain the effectiveness of MB removal, ZL activated carbon was characterized by scanning electron microscopy, Brunauer–Emmett–Teller surface area, X-ray diffraction and Fourier transform infrared spectroscopy.

Sign in / Sign up

Export Citation Format

Share Document