scholarly journals Demonstration of MEOR as an alternative enhanced oil recovery technique in Nigeria offshore oilfield

2020 ◽  
Vol 4 (3) ◽  
pp. 277-284
Author(s):  
Nsisong Emmanuel Udosoh ◽  
Thaddeus Chidiebere Nwaoha
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Economic Viability ◽  
Reservoir Characteristics ◽  
Water Output ◽  
Average Porosity ◽  
Recovery Technique ◽  
Original Oil In Place ◽  
Water Cut ◽  
Capital Intensive

Eni oilfield has been experiencing production decline with increase in water output. The implementation of enhanced oil recovery (EOR) can help to extract some percentages of the original oil in place (OOIP). EOR methods are capital intensive and few are environmental hazardous. In a bid to address these issues, this paper discusses on an alternate economically viable enhanced oil recovery technique which has the potential to curb the challenges of other conventional EOR methods.This work suggested a 3 stage approach of applying microbial enhanced oil recovery (MEOR) method for oil recovery in Eni field. The reservoir characteristics in Eni field were studied, the average porosity  value of the reservoirs is between 0.238 and 0.241.The reservoir characteristics and parameters were found suitable for the  application of MEOR technique for effective oil drainage from the delineated reservoir compartments. Microbial flooding was found to be matured in reservoirs with temperature less than 200 F, brine salinity not more than 100,000 ppm, water depth not more than 3500m and permeability should be above 30 (Md). It was recommended that MEOR  approach should be applied in Eni Oilfield for increment of oil production and reduction in water cut due to its efficiency and economic viability.

Enhanced Oil Recovery in Gasflooded Carbonate Reservoirs by Wettability-Altering Surfactants

SPE Journal ◽  
2014 ◽  
Vol 20 (01) ◽  
pp. 60-69 ◽  
Author(s):  
Leizheng Wang ◽  
Kishore Mohanty
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Surfactant Solution ◽  
Carbonate Reservoir ◽  
Wettability Alteration ◽  
Foam Formation ◽  
Recovery Technique ◽  
Flow Functions ◽  
Original Oil In Place ◽  
Water Gas

Summary Gas-aided gravity drainage is a common oil-recovery technique in anticline-shaped oil reservoirs. If the permeability is low and the reservoir is oil-wet, the remaining oil saturation can be quite high. The goal of this work is to mobilize a part of this oil by surfactant injection. An anionic-surfactant formulation was developed to alter wettability and lower interfacial tension (IFT) for a gasflooded, carbonate reservoir. Different coreflood strategies, including gas/water/surfactant/water (GWSW), gas/surfactant/gas (GSG), gas/surfactant/water (GSW), and gas/surfactant/water/gas (GSWG) floods, were investigated. GSG, GWSW, and GSWG corefloods conducted in limestone cores recovered an additional 40–50% of the original oil in place (OOIP) because of the injection of surfactant. GSW corefloods conducted in a vuggy dolomite recovered less: an approximately 20%-of-OOIP incremental recovery. Numerical simulation was used to match GSG and GSW corefloods and estimate multiphase-flow functions. A 2D conceptual simulation model using these functions was built for an anticline reservoir for gas and surfactant-solution injection. GSG flooding using wettability-altering surfactant exhibited high oil recovery at the field scale. IFT reduction, wettability alteration, and foam formation contributed to enhanced oil recovery (EOR).

Modeling to support physicochemical enhancement techniques

2021 ◽  
pp. 79-90
Author(s):  
Т. A. Pospelova
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Oil And Gas ◽  
Chemical Modeling ◽  
Comparative Structure ◽  
Water Cut ◽  
Physical And Chemical ◽  
Oil And Gas Companies ◽  
The Impact ◽  
Selection Of

The article discusses ways to increase the oil recovery factor in already developed fields, special attention is paid to the methods of enhanced oil recovery. The comparative structure of oil production in Russia in the medium term is given. The experience of oil and gas companies in the application of enhanced oil recovery in the fields is analyzed and the dynamics of the growth in the use of various enhanced oil recovery in Russia is estimated. With an increase in the number of operations in the fields, the requirements for the selection of candidates inevitably increase, therefore, the work focuses on hydrodynamic modeling of physical and chemical modeling, highlights the features and disadvantages of existing simulators. The main dependences for adequate modeling during polymer flooding are given. The calculation with different concentration of polymer solution is presented, which significantly affects the water cut and further reduction of operating costs for the preparation of the produced fluid. The possibility of creating a specialized hydrodynamic simulator for low-volume chemical enhanced oil recovery is considered, since mainly simulators are applicable for chemical waterflooding and the impact is on the formation as a whole.

Microwave Synthesis of ZnO Nanoparticles for Enhanced Oil Recovery

2014 ◽  
Vol 1024 ◽  
pp. 83-86 ◽  
Author(s):  
Mohamad Sahban Alnarabiji ◽  
Noorhana Yahya ◽  
Sharifa Bee Abd Hamid ◽  
Khairun Azizi Azizli ◽  
Afza Shafie ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Zno Nanoparticles ◽  
Sol Gel ◽  
Zinc Nitrate ◽  
Nitrate Hexahydrate ◽  
Zno Nps ◽  
Nanoparticle Morphology ◽  
Original Oil In Place

Synthesising zinc oxide nanoparticles to get certain specific characteristics to be applied in Enhanced oil recovery (EOR) is still challenging to date. In this work, zinc oxide (ZnO) nanoparticles were synthesised using the sol-gel method by dissolving zinc nitrate hexahydrate in nitric acid. The ZnO crystal and particles morphology and structure were determined using X-ray Diffractometer (XRD) and Field Emission Scanning Electron Microscope (FESEM). In this study, a microwave oven was used for annealing ZnO without insulating a sample in any casket. The results show that 30 and 40 minutes of annealing and stirring for 1 hour influenced the morphology and size of zinc oxide particles in nanoscale. These parameters could be tailored to generate a range of nanoparticle morphology (agglomerated nanoparticles in a corn-like morphology), a crystal size with the mean size of 70.5 and 74.9 nm and a main growth at the peak [10. EOR experiment were conducted by dispersing 0.10 wt% ZnO NPs in distilled water to form a ZnO nanofluid. Then the fluid was injected into the medium in the 3rd stage of the oil recovery to present EOR stage. It was found that ZnO nanofluid has the ability to extract 8% of the original oil in place (OOIP).

Effect of pressure variation on polymer flooding

2021 ◽  
Author(s):  
Ahmad Ali Manzoor
Keyword(s):  
Polymer Solution ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Heavy Oil ◽  
Constant Pressure ◽  
Maximum Pressure ◽  
Core Flooding ◽  
Sweep Efficiency ◽  
Black Oil Model ◽  
Original Oil In Place

Chemical-based enhanced oil recovery (EOR) techniques utilize the injection of chemicals, such as solutions of polymers, alkali, and surfactants, into oil reservoirs for incremental recovery. The injection of a polymer increases the viscosity of the injected fluid and alters the water-to-oil mobility ratio which in turn improves the volumetric sweep efficiency. This research study aims to investigate strategies that would help intensify oil recovery with the polymer solution injection. For that purpose, we utilize a lab-scale, cylindrical heavy oil reservoir model. Furthermore, a dynamic mathematical black oil model is developed based on cylindrical physical model of homogeneous porous medium. The experiments are carried out by injecting classic and novel partially hydrolyzed polyacrylamide solutions (concentration: 0.1-0.5 wt %) with 1 wt % brine into the reservoir at pressures in the range, 1.03-3.44 MPa for enhanced oil recovery. The concentration of the polymer solution remains constant throughout the core flooding experiment and is varied for other subsequent experimental setup. Periodic pressure variations between 2.41 and 3.44 MPa during injection are found to increase the heavy oil recovery by 80% original-oil-in-place (OOIP). This improvement is approximately 100% more than that with constant pressure injection at the maximum pressure of 3.44 MPa. The experimental oil recoveries are in fair agreement with the model calculated oil production with a RMS% error in the range of 5-10% at a maximum constant pressure of 3.44 MPa.

scholarly journals Experimental Investigation of Chemical Flooding Using Nanoparticles and Polymer on Displacement of Crude Oil for Enhanced Oil Recovery

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Imran Akbar ◽  
Hongtao Zhou ◽  
Wei Liu ◽  
Muhammad Usman Tahir ◽  
Asadullah Memon ◽  
...  
Keyword(s):  
Fluid Flow ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Petroleum Industry ◽  
Chemical Flooding ◽  
Polymer Gel ◽  
Core Flooding ◽  
High Concentration ◽  
Remaining Oil ◽  
Water Cut

In the petroleum industry, the researchers have developed a new technique called enhanced oil recovery to recover the remaining oil in reservoirs. Some reservoirs are very complex and require advanced enhanced oil recovery (EOR) techniques containing new materials and additives in order to produce maximum oil in economic and environmental friendly manners. In this work, the effects of nanosuspensions (KY-200) and polymer gel HPAM (854) on oil recovery and water cut were studied in the view of EOR techniques and their results were compared. The mechanism of nanosuspensions transportation through the sand pack was also discussed. The adopted methodology involved the preparation of gel, viscosity test, and core flooding experiments. The optimum concentration of nanosuspensions after viscosity tests was used for displacement experiments and 3 wt % concentration of nanosuspensions amplified the oil recovery. In addition, high concentration leads to more agglomeration; thus, high core plugging takes place and diverts the fluid flow towards unswept zones to push more oil to produce and decrease the water cut. Experimental results indicate that nanosuspensions have the ability to plug the thief zones of water channeling and can divert the fluid flow towards unswept zones to recover the remaining oil from the reservoir excessively rather than the normal polymer gel flooding. The injection pressure was observed higher during nanosuspension injection than polymer gel injection. The oil recovery was achieved by about 41.04% from nanosuspensions, that is, 14.09% higher than polymer gel. Further investigations are required in the field of nanoparticles applications in enhanced oil recovery to meet the world's energy demands.

Characteristics of a Geobacillus sp. as an Enhanced Oil Recovery Material

2012 ◽  
Vol 496 ◽  
pp. 542-545
Author(s):  
Xiang Ping Kong
Keyword(s):  
Crude Oil ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Sewage Treatment ◽  
Core Flooding ◽  
Treatment Technology ◽  
Promising Candidate ◽  
Different Types ◽  
Displacement Experiments ◽  
Original Oil In Place

The enhanced oil recovery characteristics of a Geobacillus sp. was investigated by shake flask experiments, blind-tube oil displacement experiments and core flooding tests. The strain exhibited good properties such as resisting high temperature, taking different types of crude oil as the sole carbon source, reducing the viscosity of crude oil, emulsifying and dispersing crude oil or liquid wax. The oil in the dead area could be effectively driven out by the strain, and the oil recovery of original oil in place had been increased by 12.9-15.9% after 5 treatments in 50 days by adopting air-assistant technique (air/liquid 10:1, v/v) due to the synergistic effect of the bacteria and their metabolites such as biogas and biosurfactants. The strain seems to be a promising candidate for microbial enhanced oil recovery and underground sewage treatment technology.

Study on Technical Limits of Single-Pipe Concatenation Gathering Process during High Water-Cut Stage

2013 ◽  
Vol 295-298 ◽  
pp. 3323-3327
Author(s):  
Li Xin Wei ◽  
Xin Peng Le ◽  
Yun Xia Fu ◽  
Zhi Hua Wang ◽  
Yu Wang
Keyword(s):  
Oil Recovery ◽  
High Water ◽  
Temperature Limit ◽  
Tertiary Oil Recovery ◽  
Recovery Technique ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut ◽  
Single Pipe ◽  
Oil Gas

In order to optimize the gathering system and reduce the energy consumption in the production, single-pipe concatenation process has been widely used after the tertiary oil recovery technique is applied and development enters into high water cut stage in the oilfield. Aiming at condensate oil in gathering pipeline and obvious increase of the high circle pressure wells in the operation of the process, the adaption relationship between oil gathering pipeline size and flow, as well as the temperature limit of the gathering system start are studied, through the hydraulic and thermodynamic calculations of oil-gas-water multiphase flow. It has directive function for making effective schemes to solve the production problems caused by the high back pressure of wells.

Sign in / Sign up

Export Citation Format

Share Document