scholarly journals Synthesis, Electrical Conductivity, and Dielectric Behaviour of Nano Polyaniline doped with H2SO4; HCl and (HCl + NaNO2) mixture: A comparative study with acetone washing

2020 ◽  
Vol 2 (2) ◽  
Author(s):  
J. Mohanty ◽  
S.S. Mishra ◽  
T.R. Das Mohapatra ◽  
S. R. Mishra ◽  
T. Badapanda
Keyword(s):  
Electrical Conductivity ◽  
Electrical Properties ◽  
Filler Materials ◽  
Ammonium Persulphate ◽  
Conducting Filler ◽  
Pani Salt ◽  
Doped Polyaniline ◽  
Electrical Conductivity Study ◽  
Washed Acid ◽  
Pani Base

Acid doped Polyaniline (PANI) due to their increased electrical conductivity, are considered to be the most promising conducting filler materials. Hence, the present study, reports the synthesis of the nano PANI followed by acid doping, electrical conductivity and dielectric properties measurements of H2SO4; HCl and (Conc. HCl + NaNO2mixture) doped PANI. In order to know the effect of acetone washing on the electrical properties of acid doped PANI samples, the electrical properties of the non-acetone washed acid doped PANI samples are compared with that of their acetone washed counterparts. The PANI salt was prepared by conventional route using aniline hydrochloride and ammonium persulphate as an oxidant. PANI salt was subjected to 0.5M NaOH to form PANI base, which was further doped separately with H2SO4; HCl and (Conc. HCl + NaNO2mixture) respectively followed by acetone washing.  A comparative electrical conductivity study between the acetone washed and unwashed PANI salt and H2SO4, HCl and Conc. HCl + NaNO2 mixture doped PANI were characterized by dielectric and impedance study.

Hydrogen Bonding Effects on the Electrical Properties and Phase Morphology of Polyaniline Blends

2005 ◽  
Vol 13 (4) ◽  
pp. 415-423
Author(s):  
Pan Wei ◽  
Yang Shenglin ◽  
Li Guang ◽  
Jiang Jianming
Keyword(s):  
Electrical Conductivity ◽  
Hydrogen Bonding ◽  
Electrical Properties ◽  
Cluster Size ◽  
Sulfonic Acid ◽  
Carbonyl Groups ◽  
Solution Cast ◽  
Doped Polyaniline ◽  
Dodecylbenzene Sulfonic Acid ◽  
Polyacrylonitrile Copolymer

Blends of dodecylbenzene sulfonic acid-doped polyaniline (PANI-DBSA) with either polyacrylonitrile copolymer (PAN) or polystyrene (PS) were solution cast. The investigation focused on the interaction between the components, the morphology and the resulting electrical conductivity of blends. The results showed that with the same PANI-DBSA content the conductivity of PANI-DBSA/PAN was higher than that of PANI-DBSA/PS. PANI-DBSA was dispersed uniformly in the PAN matrix and its cluster size was rather smaller than in the PS matrix. This is attributed to hydrogen bonding between the carbonyl groups in PAN and the imine groups in PANI, which should lead to better compatibility between PANI-DBSA and PAN.

Effect of HCl Concentration and Acetone Washing on the Dielectric and Conduction Properties of Polyaniline Salts

2021 ◽  
Vol 14 ◽  
Author(s):  
Jayashree Mohanty ◽  
S.R. Mishra ◽  
Tanmaya Badapanda ◽  
S. Anwar
Keyword(s):  
Electrical Conductivity ◽  
Electrical Properties ◽  
Acid Concentration ◽  
Charge Carriers ◽  
Short Chain ◽  
Water Medium ◽  
Distilled Water ◽  
Chain Polymer ◽  
Pani Salt ◽  
Long Chain

Aims: The aim of the work is to study the effect of acid concentration and acetone washing on electrical properties of Polyaniline (PANI) salts prepared through chemically oxidative polymerization. Background: The frequency dependent conductivity and dielectric permittivity provide important information on the electrical properties of conducting polymers which gives information regarding their utility in electronic applications. Objective: Hence, the present study is based on the comparative the electrical properties study (dielectric and electrical conductivity) of PANI salts prepared in two different media like water and 1M HCl along with study regarding effect acetone washing on the said electrical properties of the polymer samples. Methods: PANI salts are synthesized through chemical oxidative polymerisation of aniline hydrochloride with the oxidant ammonium persulphate in two different media like water and 1M HCl. One part of the PANI salt samples were washed with distilled water after synthesis and another part of the polymer samples were washed with distilled water followed by acetone to study the effect of acetone washing on the electrical properties of polymer samples. Results: Non-acetone washed PANI salt prepared in water medium shows the highest dielectric as well as electrical conductivity due to the increased charge carriers provided both by long chain polymer as well as short chain oligomers. When the acid concentration is increased to 1M there may be loss of protons accompanied by pairing of free radicals to form quinoimine units that leads to the loss of charge carriers consequently decreasing the dielectric constant and electrical conductivity. Conclusion : PANI salt prepared in water shows the highest dielectric as well as conductivity due to the increased charge carriers provided both by long chain polymer as well as short chain oligomers.

Effect of Gamma Radiation on Structural, Optical and Electrical Properties of nanostructured CdHgTe Thin Films

2018 ◽  
Vol 1 (1) ◽  
pp. 26-31 ◽  
Author(s):  
B Babu ◽  
K Mohanraj ◽  
S Chandrasekar ◽  
N Senthil Kumar ◽  
B Mohanbabu
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Electrical Properties ◽  
Gamma Radiation ◽  
Glass Substrate ◽  
Gamma Ray ◽  
Optical And Electrical Properties ◽  
Deposition Technique ◽  
Polycrystalline Structure ◽  
Dc Electrical Conductivity

CdHgTe thin films were grown onto glass substrate via the Chemical bath deposition technique. XRD results indicate that a CdHgTe formed with a cubic polycrystalline structure. The crystallinity of CdHgTe thin films is gradually deteriorate with increasing the gamma irradiation. EDS spectrums confirms the presence of Cd, Hg and Te elements. DC electrical conductivity results depicted the conductivity of CdHgTe increase with increasing a gamma ray dosage

Effect of the structure of cellulose acetate membranes on their permeability, electrical conductivity and rejection

1990 ◽  
Vol 55 (12) ◽  
pp. 2933-2939 ◽  
Author(s):  
Hans-Hartmut Schwarz ◽  
Vlastimil Kůdela ◽  
Klaus Richau
Keyword(s):  
Electrical Conductivity ◽  
Electrical Properties ◽  
Cellulose Acetate ◽  
Reverse Osmosis ◽  
Water Flux ◽  
Cellulose Acetate Membrane ◽  
Structure Parameters ◽  
Dc Electrical Conductivity ◽  
Cellulose Acetate Membranes

Ultrafiltration cellulose acetate membrane can be transformed by annealing into reverse osmosis membranes (RO type). Annealing brings about changes in structural properties of the membranes, accompanied by changes in their permeability behaviour and electrical properties. Correlations between structure parameters and electrochemical properties are shown for the temperature range 20-90 °C. Relations have been derived which explain the role played by the dc electrical conductivity in the characterization of rejection ability of the membranes in the reverse osmosis, i.e. rRO = (1 + exp (A-B))-1, where exp A and exp B are statistically significant correlation functions of electrical conductivity and salt permeation, or of electrical conductivity and water flux through the membrane, respectively.

Enhanced electrical conductivity of Au–LaNiO3 nanocomposite thin films by chemical solution deposition

RSC Advances ◽  
2015 ◽  
Vol 5 (94) ◽  
pp. 76783-76787 ◽  
Author(s):  
H. L. Wang ◽  
X. K. Ning ◽  
Z. J. Wang
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Electrical Properties ◽  
Chemical Solution Deposition ◽  
Nanocomposite Films ◽  
Chemical Solution ◽  
Solution Deposition ◽  
Nanocomposite Thin Films ◽  
One Step

Au–LaNiO3 (Au–LNO) nanocomposite films with 3.84 at% Au were firstly fabricated by one-step chemical solution deposition (CSD), and their electrical properties were investigated.

Electrical conductivity and thermopower of phosphoric acid doped polyaniline

1997 ◽  
Vol 84 (1-3) ◽  
pp. 789-790 ◽  
Author(s):  
Chul Oh Yoon ◽  
Jong Hyun Kim ◽  
Hyun Kyung Sung ◽  
Hosull Lee
Keyword(s):  
Electrical Conductivity ◽  
Phosphoric Acid ◽  
Doped Polyaniline

Studies on Polyaniline: Polyethyleneterephthalate Films

2006 ◽  
Vol 111 ◽  
pp. 99-102 ◽  
Author(s):  
A.A. Ahmed ◽  
Faiz Mohammad
Keyword(s):  
Electrical Conductivity ◽  
Electrical Properties ◽  
Arrhenius Equation ◽  
Great Increase ◽  
Thermooxidative Stability ◽  
Ambient Conditions ◽  
Dc Electrical Conductivity ◽  
The Stability ◽  
Almost All ◽  
Conductivity Retention

The films of polyaniline:polyethyleneterephthalate films were prepared by polymerizing aniline soaked in polyethyleneterephthalate films of different thicknesses. The films were characterized by FTIR as well as for their electrical properties. The electrical properties of the films were observed to be of good quality as almost all the films showed a great increase in their electrical conductivity from insulator to semiconductor region after doping with hydrochloric acid. All the films in their doped state follow the Arrhenius equation for the temperature dependence of electrical conductivity from 35 to 115oC. The thermooxidative stability was studied by thermogravimetry and differential thermal analysis. The stability in terms of dc electrical conductivity retention was also studied under ambient conditions by two slightly different techniques viz. isothermal and cyclic techniques. The dc electrical conductivity of the films was found to be stable below 90oC for all the films under ambient conditions.

Influence of Chemical Modification on the Electrical Properties of Si Nanowire Arrays

2010 ◽  
Vol 160-162 ◽  
pp. 1331-1335 ◽  
Author(s):  
Chuan Bo Li ◽  
Kristel Fobelets ◽  
S.N. Syed Jalal ◽  
Wei A. Ng ◽  
Zahid A.K. Durrani
Keyword(s):  
Electrical Conductivity ◽  
Electrical Property ◽  
Electrical Properties ◽  
Chemical Modification ◽  
Nanowire Array ◽  
Noise Measurement ◽  
Nanowire Arrays ◽  
Interface Traps ◽  
Si Nanowire ◽  
Si Nanowire Array

The influence of the chemical modification on the electrical property of Si nanowire array was studied. It is found that H-terminated Si nanowire has a better electrical conductivity while OH-passivation could increase their resistance. It is believed that the introducing of OH group on the surface nanowire increases the interface traps and it is confirmed by our 1/f noise measurement.

Structure and Electrical Properties of Pulsed Laser Deposited Amorphous Carbon Nitride Thin Films

2002 ◽  
Vol 750 ◽  
Author(s):  
Yoshifumi Aoi ◽  
Kojiro Ono ◽  
Kunio Sakurada ◽  
Eiji Kamijo
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Electrical Properties ◽  
Photoelectron Spectroscopy ◽  
Pulsed Laser ◽  
Film Surface ◽  
Input Power ◽  
Localized States ◽  
Active Nitrogen ◽  
Deposited Films

ABSTRACTAmorphous CNx thin films were deposited by pulsed laser deposition (PLD) combined with a nitrogen rf radical beam source which supplies active nitrogen species to the growing film surface. The deposited films were characterized by X-ray photoelectron spectroscopy (XPS), Raman scattering, and Fourier transform infrared (FTIR) spectroscopy. Nitrogen content of the deposited films increased with increasing rf input power and N2 pressure in the PLD chamber. The maximum N/C ratio 0.23 was obtained at 400 W of rf input power and 1.3 Pa. XPS N 1s spectra shows the existence of several bonding structures in the deposited films. Electrical properties of the deposited films were investigated. The electrical conductivity decreased with increasing N/C atomic ratio. Temperature dependence of electrical conductivity measurements indicated that electronic conduction occurred by variable-range hopping between p electron localized states.

Sign in / Sign up

Export Citation Format

Share Document