scholarly journals The method of trophy assessment of capercaillies

2019 ◽  
Vol 20 (5) ◽  
pp. 508-516
Author(s):  
V. V. Kolesnikov ◽  
D. P. Strelnikov ◽  
N. S. Sukhanova

The capercaillie as one of the most important hunting objects in Russia has not yet been included in the list of esti-mated hunting trophies due to the lack of an acceptable assessment methodology. The aim of the work is to develop a method for assessing the trophy advantages of a capercaillie. The objects of the study were morphological indicators which expressed the size and the age of the birds caught. The study involved 39 stuffed animals of capercaillie, 47 carcasses of freshly caught birds and 105 skulls from research collections. Measurement of taxidermy products (stuffed animals and museum carcasses) gives inaccurate information about the fowl caught. It is preferable to use the skull of a male capercaillie as a trophy. In the system of the International Council for the Hunting and Preservation of the Wildlife (CIC) the traditional measurements of the skull are the maximum length and width. In trophy animals, the scull size sufficiently reflects the sum of these indicators, therefore they are chosen for trophy assessment. For capercaillie, the correlation of similar pro-meters with body weight was not so close r = 0.489. In authors’ opinion, the assessment method should include the size of the interorbital space as an addi-tional parameter. This measurement is used in methods for determining the age of capercaillies caught. The formula for scoring is the product of the interorbital space by the sum of the maximum length and width of the skull. The correlation coeffi-cient between the trophy rating by this formula and the bird weight in this study is rm = 0.931, and the trophy rating and age rv = 0.920. The intervals of the final points for awarding the medals are: bronze  55-59.99 points, silver  60-64.99, gold  more than 65 points. This assessment system was successfully tested at two exhibitions of hunting trophies held in the Kirov region in 2017, and was approved by expert commissions.

Author(s):  
A. Ilki ◽  
O. F. Halici ◽  
M. Comert ◽  
C. Demir

AbstractPost-Earthquake damage assessment has always been one of the major challenges that both engineers and authorities face after disastrous earthquakes all around the world. Considering the number of buildings in need of inspection and the insufficient number of qualified inspectors, the availability of a thorough, quantitative and rapidly applicable damage assessment methodology is vitally important after such events. At the beginning of the new millennia, an assessment system satisfying these needs was developed for the Turkish Catastrophe Insurance Pool (TCIP, known as DASK in Turkey) to evaluate the damages in reinforced concrete (RC) and masonry structures. Since its enforcement, this assessment method has been successfully used after several earthquakes that took place in Turkey, such as 2011 Van Earthquake, 2011 Kutahya Earthquake, 2019 Istanbul Earthquake and 2020 Elazig Earthquake to decide the future of damaged structures to be either ‘repaired’ or ‘demolished’. Throughout the years, the number of research activities focusing on the reparability of earthquake-damaged structures has increased, which is a purposeful parameter in the determination of buildings’ future after earthquakes. Accordingly, TCIP initiated a research project with a sole aim to regulate and reevaluate the damage assessment algorithm based on the results of state-of-the-art scientific research. This chapter presents the new version of the damage assessment methodology for reinforced concrete structures which was developed for TCIP (TCIP-DAM-2020). In addition, an application of the developed damage assessment algorithm on an earthquake-damaged reinforced concrete building which was struck by Kocaeli (1999) earthquake is presented.


Encyclopedia ◽  
2021 ◽  
Vol 1 (2) ◽  
pp. 472-481
Author(s):  
Nasim Aghili ◽  
Mehdi Amirkhani

Green buildings refer to buildings that decrease adverse environmental effects and maintain natural resources. They can diminish energy consumption, greenhouse gas emissions, the usage of non-renewable materials, water consumption, and waste generation while improving occupants’ health and well-being. As such, several rating tools and benchmarks have been developed worldwide to assess green building performance (GBP), including the Building Research Establishment Environmental Assessment Method (BREEAM) in the United Kingdom, German Sustainable Building Council (DGNB), Leadership in Energy and Environmental Design (LEED) in the United States and Canada, Comprehensive Assessment System for Built Environment Efficiency (CASBEE) in Japan, Green Star in Australia, Green Mark in Singapore, and Green Building Index in Malaysia. Energy management (EM) during building operation could also improve GBP. One of the best approaches to evaluating the impact of EM on GBP is by using structural equation modelling (SEM). SEM is a commanding statistical method to model testing. One of the most used SEM variance-based approaches is partial least squares (PLS), which can be implemented in the SmartPLS application. PLS-SEM uses path coefficients to determine the strength and significance of the hypothesised relationships between the latent constructs.


2011 ◽  
Vol 347-353 ◽  
pp. 4097-4103
Author(s):  
You Yin Jing ◽  
Jian Liang Zhang ◽  
He Bai

This paper proposes some suggestions to perfect our current green building assessment system. Green building and ecological building is undoubtedly the trend of construction industry. Green building assessment systems play a directional function for the design, the construction and the use of green architecture. This paper introduces the development of green building assessment system at China and other country firstly. Through the comparison and analysis for some kinds of green building assessment systems, found that that the applicability for buildings and areas and the fairness for ecological environment and surrounding people of current assessment system should be optimized. Finally,proposed that several aspects must be considered, and thus establish the new system-A Green Building Assessment Method Which Based on the Environmental Disturbance and Ecological Compensation.


2011 ◽  
Vol 71-78 ◽  
pp. 3868-3873
Author(s):  
Li Jin Ma ◽  
Hong Juan Zou ◽  
Jia Shun Zhu

According to the micro-climate environment outdoor of the region, wind environment outdoor which is under planning programming can be done analog computation using computational fluid mechanics PHOENICS software. A set of comprehensive prediction and assessment system which is mainly focused on outdoor environment composite index WBGT can be established combining with assessment method on wind environment outdoor of predecessors in order to more accurately and humanly predict and assess the wind environment outdoor, bring safe, comfortable and healthy outdoor environment and provide references for the assessment and design of green residential district.


2017 ◽  
Vol 5 (1) ◽  
pp. 6-9
Author(s):  
Fatima Parveen Chowdhury ◽  
AKM Asaduzzaman ◽  
Tahmina Nargis ◽  
Chowdhury Nasrath Munir Abeer

It was a descriptive study. The objective was to find out the perception of intern doctors regarding newly introduced assessment system in final professional MBBS examination which was held in July 2011. Data were collected from 500 inter doctors of selected medical colleges by using self administered questionnaire. It was found that majority (84%) of the respondent expressed their satisfaction with the newly introduced assessment method .Of the students 95.5% mentioned that SAQ is better than Essay questions. Inclusion of MCQ, SOE and OSCE in examination is worthy was opined by about 86.6%, 81.7%, 78% of the students respectively. Nearly eighty nine (89%) percent respondents thought that adding of a certain percentage of mark of formative assessment in final examination is better. About 29% of respondents said that examination phobia in oral /viva is not reduced by introducing SOE, 26.2% believed that all examinees are not judged in same standard by examiners by means of OSCE and 31% respondents believed that result of examination in SOE, some extent depends upon the examiners desire and intention. So, it reveals that the new assessment method is not implemented properly. Students also identified strengths and weakness of the new assessment.Bangladesh Journal of Medical Education Vol.5(1) 2014: 6-9


Author(s):  
JooWan Park ◽  
Chang-Lak Kim ◽  
Jin Beak Park ◽  
Eun Yong Lee ◽  
Youn Myoung Lee ◽  
...  

An integrated safety assessment system to be used for evaluation of near-surface disposal concept has been developed within the framework of safety assessment methodology taken for low- and intermediate-level radioactive waste disposal in Korea. It is to provide an evaluation of the safety of the disposal system in a clear, comprehensive and well-documented manner, and to integrate the results into a defensible package showing reasonable assurance of compliance with regulatory requirements for licensing application. This system is made up of two key components, a system-level safety assessment code and an input database/quality assurance module for safety assessment, which both are interfaced with each other.


Author(s):  
Xiang Li ◽  
Weihua Wang ◽  
Weike Jing ◽  
Jin Shi ◽  
Fakun Zhuang

Abstract In recent years, ammonia leakage accidents occur frequently, which causes a great concern in China. Based on traditional risk analysis methods and the equipment characteristics, a risk evaluation method for small ammonia refrigeration units is proposed. The method includes a risk assessment model based on area division, a failure probability assessment method based on expert scoring system, a failure consequence assessment method based on regional population density and consequence mitigation measures, and a HAZOP risk correction method. Based on the proposed method, a risk assessment system of small ammonia refrigeration units is developed. This risk assessment method and system will provide a scientific basis to carry out the cold storage management in China.


Author(s):  
Saheed O. Ajayi ◽  
Lukumon O. Oyedele ◽  
Jamiu A. Dauda

Purpose Buildings and their construction activities consume a significant proportion of mineral resources excavated from nature and contribute a large percentage of CO2 in the atmosphere. As a way of improving the sustainability of building construction and operation, various sustainable design appraisal standards have been developed across nations. Albeit criticism of the appraisal standards, evidence shows that increasing sustainability of the built environment has been engendered by such appraisal tools as Building Research Establishment Environmental Assessment Method (BREEAM), Code for Sustainable Homes (CfSH), Leadership in Energy and Environmental Design and Comprehensive Assessment System for Built Environment Efficacy, among others. The purpose of this paper is to evaluate the effectiveness of the appraisal standards in engendering whole lifecycle environmental sustainability of the built environment. Design/methodology/approach In order to evaluate the adequacy of sustainability scores assigned to various lifecycle stages of buildings in the appraisal standards, four case studies of a block of classroom were modelled. Using Revit as a modelling platform, stage by stage lifecycle environmental impacts of the building were simulated through Green Building Studio and ATHENA Impact estimator. The resulting environmental impacts were then compared against the assessment score associated with each stage of building lifecycle in BREAAM and CfSH. Findings Results show that albeit the consensus that the appraisal standards engender sustainability practices in the AEC industry, total scores assigned to impacts at each stage of building lifecycle is disproportionate to the simulated whole-life environmental impacts associated with the stages in some instances. Originality/value As the study reveals both strengths and weaknesses in the existing sustainability appraisal standards, measures through which they can be tailored to resource efficiency and lifecycle environmental sustainability of the built environment are suggested.


Author(s):  
Elzbieta Paszynska ◽  
Monika Dmitrzak-Węglarz ◽  
Aleksandra Perczak ◽  
Maria Gawriolek ◽  
Tomasz Hanć ◽  
...  

In recent years, attention has been paid to the co-occurrence of attention deficit hyperactivity disorder (ADHD) and obesity, but results in relation to dental caries outcomes differ. The study was conducted to determine obesity/overweight and dental caries in children suffering from ADHD and to draw comparisons with non-ADHD children. A total of 119 children under 11 years old (8.2 ± 1.2) were enrolled into a cross-sectional study: those with confirmed ADHD (n = 39), and healthy controls (n = 80). The behavioral evaluation included a parent interview directed at sweetened food/drink habits. The clinical evaluation included physical measurements (height, waist, hip circumference, body weight, body mass index (BMI), and dental examination (International Caries Detection and Assessment System—ICDAS). Results showed a higher prevalence of abnormal body weight, hip circumference, and BMI, and a higher frequency of caries (84.6%) in the ADHD group. Significant caries differences for primary (ICDAS 0, 1, 2, 5, 6 scores) and permanent teeth (ICDAS 1, 3 scores) were recorded. The questionnaire pinpointed interplays between sugar consumption and tooth decay, especially for primary dentition. It can be concluded that the consumption of sweetened foods/drinks among ADHD children may lead to an increased rate of overweight, but may also affect oral health. Limiting sugar consumption might be one of the important elements in prevention programmes against dental caries and overweight/obesity.


Coatings ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 69 ◽  
Author(s):  
Alejandra Naranjo ◽  
Andrés Colonia ◽  
Jaime Mesa ◽  
Heriberto Maury ◽  
Aníbal Maury-Ramírez

Green roof systems, a technology which was used in major ancient buildings, are currently becoming an interesting strategy to reduce the negative impact of traditional urban development caused by ground impermeabilization. Only regarding the environmental impact, the application of these biological coatings on buildings has the potential of acting as a thermal, moisture, noise, and electromagnetic barrier. At the urban scale, they might reduce the heat island effect and sewage system load, improve runoff water and air quality, and reconstruct natural landscapes including wildlife. In spite of these significant benefits, the current design and construction methods are not completely regulated by law because there is a lack of knowledge of their technical performance. Hence, this review of the current state of the art presents a proper green roof classification based on their components and vegetation layer. Similarly, a detailed description from the key factors that control the hydraulic and thermal performance of green roofs is given. Based on these factors, an estimation of the impact of green roof systems on sustainable construction certifications is included (i.e., LEED—Leadership in Energy and Environment Design, BREEAM—Building Research Establishment Environmental Assessment Method, CASBEE—Comprehensive Assessment System for Built Environment Efficiency, BEAM—Building Environmental Assessment Method, ESGB—Evaluation Standard for Green Building). Finally, conclusions and future research challenges for the correct implementation of green roofs are addressed.


Sign in / Sign up

Export Citation Format

Share Document