scholarly journals NEW DATA ON PROMISING OIL AND GAS OBJECTS IN THE SANDSTONES OF THE YAMNA SUITE OF THE PALEOCENE IN THE NORTHWEST OF THE SKIBA ZONE OF THE UKRAINIAN CARPATHIANS

2021 ◽  
pp. 90-110
Author(s):  
V.Ye. Shlapinskiy ◽  
H.Ya. Havryshkiv ◽  
Yu.P. Haievska
Keyword(s):  
Oil And Gas ◽  
Gas Production ◽  
Oil Field ◽  
Distribution Area ◽  
Total Production ◽  
Reservoir Properties ◽  
Oil And Gas Production ◽  
The North ◽  
Natural Oil ◽  
Porosity And Permeability

More than 6 million tons of the oil have been extracted in the Skybа Zone of the Ukrainian Carpathians. In particular, 4.2 million tons of oil (85.7% of total production) were obtained from the Yamna sandstones of Paleocene, which are characterized by satisfactory physical properties. Most of the areas of fields that exploited them are located in the Boryslav oil and gas production area. Among them are such oil fields as Skhidnytsko-Urytske (more than 3.8 million tons of oil extracted), Violeta, Faustina, MEP, Miriam and Ropne. Outside this area, oil was extracted in Strilbychi and Staraya Sol. At most of these fields, oil horizons are at a depth of only 100-800 m. The gas and condensate are extracted at the field of Tanyavа in the wing of the Vytvytska Luska of the Berehova Skyba, which has been torn off by the thrust. In addition, a very large number of natural oil and gas manifestations - direct signs of oil and gas potential - have been recorded in the Skyba Zone. All this indicates the potential prospects of structures within the Skyba Zone, including shallow ones. The distribution area of Yamna sandstones is much larger than the area of these deposits. The distribution area of sandstones of Yamna is much larger than the area of these deposits. It occupies about half of the area of Skyba Zone. Part of it can be considered promising, removing areas where of Yamna sandstones are present on the day surface, although, even in such conditions, they are in some cases industrially oil-bearing (Strelbychi oil field). Sandstones of Yamna are characterized by satisfactory reservoir properties., The calculated porosity and permeability reach the maximum values at known deposits: 0.182 and 130 ∙ 10–3 microns2 respectively, and the estimated thickness of 13.5 m. In the Folded Carpathians and, especially, within the north-eastern fragments (Beregova, Oriv, Skoliv) in different years performed a large amount of field seismic surveys. On the basis of the obtained materials, for the first time in the Carpathian region structural constructions were made on the reflecting horizons in the Paleocene (Yamna Formation) and in the Stryi Formation of the Upper Cretaceous. This article evaluates the prospects of these research objects. The Khodkiv and Osichnyanska structures of Berehova Skyba are recommended for conducting search works.

The Beryl Field, Block 9/13, UK North Sea

1991 ◽  
Vol 14 (1) ◽  
pp. 33-42 ◽  
Author(s):  
C. A. Knutson ◽  
I. C. Munro
Keyword(s):  
North Sea ◽  
Middle Jurassic ◽  
Oil And Gas ◽  
Upper Jurassic ◽  
Lower Jurassic ◽  
Gas Production ◽  
Upper Triassic ◽  
Oil Field ◽  
Oil And Gas Production ◽  
The North

AbstractThe Beryl Field, the sixth largest oil field in the UK sector of the North Sea, is located within Block 9/13 in the west-central part of the Viking Graben. The block was awarded in 1971 to a Mobil operated partnership and the 9/13-1 discovery well was drilled in 1972. The Beryl A platform was emplaced in 1975 and the Beryl B platform in 1983. To date, ninety-five wells have been drilled in the field, and drilling activity is anticipated into the mid-1990s.Commercial hydrocarbons occur in sandstone reservoirs ranging in age from Upper Triassic to Upper Jurassic. Structurally, the field consists of a NNE orientated horst in the Beryl A area and westward tilted fault blocks in the Beryl B area. The area is highly faulted and complicated by two major and four minor unconformities. The seal is provided by Upper Jurassic shales and Upper Cretaceous marls.There are three prospective sedimentary sections in the Beryl Field ranked in importance as follows: the Middle Jurassic coastal deltaic sediments, the Upper Triassic to Lower Jurassic continental and marine sediments, and the Upper Jurassic turbidites. The total ultimate recovery of the field is about 800 MMBBL oil and 1.6 TCF gas. As of December 1989, the field has produced nearly 430 MMBBL oil (primarily from the Middle Jurassic Beryl Formation), or about 50% of the ultimate recovery. Gas sales are scheduled to begin in the early 1990s. Oil and gas production is forecast until licence expiration in 2018.The Beryl Fields is located 215 miles northeast of Aberdeen, about 7 miles from the United Kingdom-Norwegian boundary. The field lies within Block 9/13 and covers and area of approximately 12 000 acres in water depths ranging from 350-400 ft. Block 9/13 contains several hydrocarbon-bearing structures, of which the Beryl Fields is the largest (Fig. 1). The field is subdivided into two producing areas: the Beryl Alpha area which includes the initial discovery well, and the Beryl Bravo area located to the north. The estimated of oil originally in place is 1400 MMBBL for Beryl A and 700 MMBBL for Beryl B. The fiel has combined gas in place of 2.8 TCF, consisting primarily of solution gas. Hydrocarbon accumulations occur in six reservoir horizons ranging in age from Upper Triassic to Upper Jurassic. The Middle Jurassic (Bathonian to Callovian) age Beryl Formation is the main reservoir unit and contains 78% of the total ultimate recovery.The field was named after Beryl Solomon, the wife of Charles Solomon, who was president of Mobil Europe in 1972 when the field was discovered. The satellite fields in Block 9/13 (Nevis, Ness and Linnhe) are named after Scottish lochs.

scholarly journals Impact of Diagenesis on the Reservoir Properties of the Cretaceous Sandstones in the Southern Bredasdorp Basin, Offshore South Africa

Minerals ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 757
Author(s):  
Temitope Love Baiyegunhi ◽  
Kuiwu Liu ◽  
Oswald Gwavava ◽  
Christopher Baiyegunhi
Keyword(s):  
Oil And Gas ◽  
Gas Production ◽  
Reservoir Quality ◽  
Reservoir Properties ◽  
Oil And Gas Production ◽  
Thin Sections ◽  
Hydrocarbon Reservoir ◽  
Porosity And Permeability ◽  
The Impact

The Cretaceous sandstone in the Bredasdorp Basin is an essential potential hydrocarbon reservoir. In spite of its importance as a reservoir, the impact of diagenesis on the reservoir quality of the sandstones is almost unknown. This study is undertaken to investigate the impact of digenesis on reservoir quality as it pertains to oil and gas production in the basin. The diagenetic characterization of the reservoir is based on XRF, XRD SEM + EDX, and petrographic studies of 106 thin sections of sandstones from exploration wells E-AH1, E-AJ1, E-BA1, E-BB1 and E-D3 in the basin. The main diagenetic processes that have affected the reservoir quality of the sandstones are cementation by authigenic clay, carbonate and silica, growth of authigenic glauconite, dissolution of minerals and load compaction. Based on the framework grain–cement relationships, precipitation of the early calcite cement was either accompanied or followed up by the development of partial pore-lining and pore-filling clay cements, particularly illite. This clay acts as pore choking cement, which reduces porosity and permeability of the reservoir rocks. The scattered plots of porosity and permeability versus cement + clays show good inverse correlations, suggesting that the reservoir quality is mainly controlled by cementation and authigenic clays.

scholarly journals Measuring methane emissions from oil and gas platforms in the North Sea

2019 ◽  
Author(s):  
Stuart N. Riddick ◽  
Denise L. Mauzerall ◽  
Michael Celia ◽  
Neil R. P. Harris ◽  
Grant Allen ◽  
...  
Keyword(s):  
North Sea ◽  
Oil And Gas ◽  
Gas Production ◽  
Normal Operation ◽  
Total Production ◽  
Emission Inventories ◽  
Oil And Gas Production ◽  
Ch4 Emissions ◽  
The North ◽  
The North Sea

Abstract. Recent studies suggest oil and natural gas production facilities in North America may be underestimating methane (CH4) emissions during extraction. This, coupled with unusually high CH4 mole fractions observed at coastal sites during onshore winds in the UK, suggests CH4 emissions from oil and gas extraction activities in the North Sea could be higher than previously reported. To investigate if these coastal CH4 enhancements could have come from oil and gas production platforms, we use near-source measurement techniques to estimate CH4 emissions from eight oil and gas production platforms in the North Sea. We estimate the mean CH4 emission from the eight platforms to be 10.1 g CH4 s−1, with a range of 1.1 to 25.0 g CH4 s−1. When matched to production records, individual platforms lose between 0.01 % and 1.58 % of gas production with an average loss of 0.61 % of gas production. However, when the measured platforms are considered collectively, i.e. when the total measured emission is compared to total production of the platforms measured, the CH4 loss is estimated at 0.27 % of gas production. These calculated ranges are at least double the most recently reported loss rates for these platforms, which are currently estimated at 0.13 % of gas production. In fact, the vast majority of reported emissions are due to gas flaring and offshore oil loading, neither of which was taking place at the time of these measurements. If emissions measured here resulted from leakage during normal operation, they represent significant additional emissions (at least 0.27 % of production) above previous estimates of CH4 leakage from off-shore oil and gas production platforms. These emissions are not explicitly included in UK emission inventories. Further research to determine CH4 leakage from all operations occurring at off-shore oil and gas platforms, and how to include them in national emission inventories, is needed.

scholarly journals DEVELOPMENT OF METHODS OF INCREASING OIL RECOVERY OF FIELDS IN THE CHECHEN REPUBLIC

2021 ◽  
Author(s):  
А.А. Умаев ◽  
А-М.Б. Измаилов ◽  
Т-А.У. Мусаев ◽  
А.Ш. Халадов
Keyword(s):  
Oil Recovery ◽  
Oil And Gas ◽  
Gas Production ◽  
North Caucasus ◽  
Reservoir Properties ◽  
Oil And Gas Production ◽  
The North ◽  
Geological Conditions ◽  
Temperature And Pressure ◽  
The Impact

Наряду с совершенствованием эксплуатации скважин и повышением продуктивности за счет работ по воздействию на призабойную зону пласта, одним из главных вопросов является повышение нефтеотдачи пласта. Актуальность этих вопросов не вызывает сомнения применительно к месторождениям Северного Кавказа. Особенные геологическиеусловия присущие продуктивным пластам Чеченской республики (большая глубина залегания, высокая температура и давление, неоднородность коллекторских свойств и т.д.) затрудняют или полностью исключают возможность применения известных методов физико-химического воздействия на пласты с целью интенсификации отборов нефти и повышения нефтеотдачи. На нефтегазодобывающих объектах ЧР применялись основные физико-химические, тепловые и гидродинамические методы повышения нефтеотдачи пластов Along with improving the operation of wells and increasing productivity due to the work on the impact on the bottomhole formation zone, one of the main issues is the increase in oil recovery. The relevance of these issues does not raise doubts in relation to the fields of the North Caucasus. The special geological conditions inherent in the productive formations of the Chechen Republic (large depth, high temperature and pressure, heterogeneity of reservoir properties, etc.) make it difficult or completely exclude the possibility of using known methods of physicochemical treatment of formations in order to intensify oil production and increase oil recovery. The main physical, chemical, thermal and hydrodynamic methods of enhanced oil recovery were used at oil and gas production facilities in the Chechen Republic

Ghana's petroleum industry: expectations, frustrations and anger in coastal communities

2020 ◽  
Vol 58 (3) ◽  
pp. 397-424
Author(s):  
Jesse Salah Ovadia ◽  
Jasper Abembia Ayelazuno ◽  
James Van Alstine
Keyword(s):  
Oil And Gas ◽  
Local Development ◽  
Petroleum Industry ◽  
Field Research ◽  
Gas Production ◽  
Oil Field ◽  
Oil And Gas Production ◽  
High Expectations ◽  
Petroleum Resources ◽  
Negative Impacts

ABSTRACTWith much fanfare, Ghana's Jubilee Oil Field was discovered in 2007 and began producing oil in 2010. In the six coastal districts nearest the offshore fields, expectations of oil-backed development have been raised. However, there is growing concern over what locals perceive to be negative impacts of oil and gas production. Based on field research conducted in 2010 and 2015 in the same communities in each district, this paper presents a longitudinal study of the impacts (real and perceived) of oil and gas production in Ghana. With few identifiable benefits beyond corporate social responsibility projects often disconnected from local development priorities, communities are growing angrier at their loss of livelihoods, increased social ills and dispossession from land and ocean. Assuming that others must be benefiting from the petroleum resources being extracted near their communities, there is growing frustration. High expectations, real and perceived grievances, and increasing social fragmentation threaten to lead to conflict and underdevelopment.

Solubility Of Common Oil Field Scales Of Injection Water And High–barium Concentration And High–salinity Formation Water

2012 ◽  
Author(s):  
Amer Badr Merdhah ◽  
Abu Azam Mohd Yassin
Keyword(s):  
Oil And Gas ◽  
High Salinity ◽  
Sea Water ◽  
Water Injection ◽  
Gas Production ◽  
Oil Field ◽  
Formation Water ◽  
Oil And Gas Production ◽  
Barium Concentration ◽  
Injection Water

Kerak pemendapan merupakan satu daripada masalah paling penting dan serius dalam sistem suntikan air. Kerak kadangkala mengehadkan atau menghalang penghasilan gas dan minyak melalui penyumbatan matrik atau perpecahan pembentukan minyak dan jeda yang berlubang. Makalah ini mengetengahkan kesimpulan pengukuran makmal bagi kerak terbentuk di dalam keterlarutan medan minyak biasa dalam sintetik air masin (pembentukan air dan air laut) bagi pembentukan air yang mengandungi barium dan kandungan garam yang tinggi pada suhu 40 hingga 90°C pada tekanan atmosfera. Keputusan uji kaji mengesahkan pola kebergantungan keterlarutan bagi kerak medan minyak biasa pada keadaan ini. Pada suhu yang lebih tinggi, kerak bagi CaCO3, CaSO4, dan SrSO4 meningkat manakala kerak BaSO4 menurun disebabkan oleh keterlarutan CaCO3, CaSO4, dan SrSO4 menurun dan keterlarutan BaSO4 meningkat dengan kenaikan suhu. Kata kunci: Masalah pengskalaan; skala keterlarutan; paras kandungan garam tinggi; logam barium tinggi Scale deposition is one of the most important and serious problems which water injection systems are generally engaged in. Scale sometimes limits or blocks oil and gas production by plugging the oil–producing formation matrix or fractures and the perforated intervals. This paper presents a summary of the laboratory measurements of the solubility of common oil field scales in synthetic brines (formation water and sea water) of high–barium and high–salinity formation waters at 40 to 90°C and atmospheric pressure. The experimental results confirm the general trend in solubility dependencies for common oil field scales at these conditions. At higher temperatures the deposition of CaCO3, CaSO4 and SrSO4 scale increases and the deposition of BaSO4 scale decreases since the solubilities of CaCO3, CaSO4 and SrSO4 scales decreases and the solubility of BaSO4 increases with increasing temperature. Key words: Scaling problems; solubility of scale; high salinity; high barium

Development of semi-submersible production vessels and its application to Australian waters

2008 ◽  
Vol 48 (1) ◽  
pp. 241
Author(s):  
Hilde Engelsen ◽  
Henrik Hannus
Keyword(s):  
North Sea ◽  
Environmental Conditions ◽  
Oil And Gas ◽  
Gas Production ◽  
Oil And Gas Production ◽  
The North ◽  
Hull Design ◽  
Steel Catenary Risers ◽  
Drilling Rigs ◽  
In The Beginning

Semi-submersible platforms have a long history in the North Sea. In the beginning they were used mainly as mobile offshore drilling units, but in the last two decades the permanently moored semi-submersible production vessels have become widely used both as gas processing units and combination oil and gas production vessels. The design of production semi-submersibles evolved from that of drilling rigs, but there have since been significant improvements to the design of the hull and the topside configuration in relation to operational requirements and construction processes. The design methods have also been successfully adapted to areas with different environmental conditions, in combination with steel catenary risers and polyester mooring systems. On recent designs, simplifications of the hull systems are being implemented, which ease operation and enhance the passive safety. Finally, the semi-submersible production vessel’s application to Australian waters is discussed with focus on topside layout, hull design and mooring system design. Environmental conditions offshore northwest Australia are compared to North Sea and Gulf of Mexico conditions, along with vessel class and regulatory requirements.

Design of Sand Washing and Plug Removal Device with High Pressure Foam Fluid Jet

2012 ◽  
Vol 155-156 ◽  
pp. 722-725
Author(s):  
Wen Bin Cai ◽  
Guo Wei Qin ◽  
Yan He
Keyword(s):  
High Pressure ◽  
Oil And Gas ◽  
Horizontal Wells ◽  
Gas Production ◽  
Oil Field ◽  
Good Effect ◽  
Well Bore ◽  
Sand Production ◽  
Oil And Gas Production ◽  
And Performance

In the oil and gas production process, serious sand production causes reservoir and pipe blocked, which makes productivity declined, even stopped. It's the efficient means of sand washing and plug removal by using high-pressure foam fluid jet. The structure and performance of sand washing device determines the efficiency of sand washing and plug removal. The device's nozzle consists of anti-blocking valves, three kinds of nozzles with self-drive, rotation characteristics during the operation. The nozzles include sand washing nozzle, couple nozzle and power nozzle. This device can be used in horizontal wells with complex well bore situation to carry out sand and plug removal. The device has a good effect on sand washing and plug removal in the oil field.

Research and Application of the Deep Horizontal Drilling and Completion Technology for Liaohe Oilfield Buried Hill Reservoir

2012 ◽  
Vol 241-244 ◽  
pp. 1396-1399
Author(s):  
Gui Min Nie ◽  
Dan Guo ◽  
Yan Wang ◽  
Xiao Wei Cheng
Keyword(s):  
Oil And Gas ◽  
Drilling Fluid ◽  
Horizontal Wells ◽  
Gas Production ◽  
Oil Field ◽  
Oil And Gas Production ◽  
Horizontal Drilling ◽  
Liaohe Oilfield ◽  
Buried Hill ◽  
Composite Drilling

With the depletion of shallow-layer oil and gas pools inLiaohe oilfield, buried hill stratigraphic reservoirs in Liaohe oil field are becoming main objectives for exploration in recent years, especially in high-risk areas of Xinglongtai deep the Hing ancient buried hill resources are particularly rich. Since 2007, Liaohe oilfield increased investment for Buried Hill reservoirs with deep horizontal drilling developt the buried hill reservoir. Liaohe has completed 36 deep horizontal, with a total footage of 183920m, the average depth of 5109m. Improving drilling speed of "buried hill deep horizontal and branch horizontal wells”, and reducing drilling costs are of great urgency. “Hing buried hill deep horizontal, horizontal wells,” with composite drilling technology, supporting the optimization of PDC bits, the high-pressure jet drilling, the MWD borehole trajectory control and optimization of drilling parameters, the new drilling fluid technology and so on. With a large number of horizontal wells put into Buried Hill stratigraphic reservoirs, oil and gas production of average deep horizontal well increase of 2-5 times. Besides, the previous recovery and production of oil and gas reservoirs significantly improved to create an objective economic and social benefits.

scholarly journals Late Cretaceous basin development of the southern Danish Central Graben

1969 ◽  
Vol 20 ◽  
pp. 15-18
Author(s):  
Finn Jakobsen ◽  
Claus Andersen
Keyword(s):  
Late Cretaceous ◽  
Oil And Gas ◽  
Seismic Inversion ◽  
Gas Production ◽  
Structural Development ◽  
Oil Accumulation ◽  
Oil And Gas Production ◽  
North West ◽  
The North ◽  
Basin Development

The Danish oil and gas production mainly comes from fields with chalk reservoirs of Late Cretaceous (Maastrichtian) and early Paleocene (Danian) ages located in the southern part of the Danish Central Graben in the North Sea. The area is mature with respect to exploration with most chalk fields located in structural traps known since the 1970s. However, the discovery by Mærsk Oil and Gas A/S of the large nonstructurally and dynamically trapped oil accumulation of the Halfdan Field in 1999 north-west of the Dan Field (e.g. Albrechtsen et al. 2001) triggered renewed exploration interest. This led to acquisition of new high quality 3-D seismic data that considerably enhanced imaging of different depositional features within the Chalk Group. Parallel to the endeavours by the operator to locate additional non-structural traps in porous chalk, the Geological Survey of Denmark and Greenland took advantage of the new data to unravel basin development by combining 3-D seismic interpretation of a large number of seismic markers, well log correlations and 2-D seismic inversion for prediction of the distribution of porous intervals in the Chalk Group. Part of this study is presented by Abramovitz et al. (in press). In the present paper we focus on aspects of the general structural development during the Late Cretaceous as illustrated by semi-regional time-isochore maps. The Chalk Group has been divided into two seismically mappable units (a Cenomanian–Campanian lower Chalk Unit and a Maastrichtian–Danian upper Chalk Unit) separated by a distinct basin-wide unconformity.

Sign in / Sign up

Export Citation Format

Share Document