scholarly journals Features of application of the in situ and ex situ measurement techniques for determination of 137Cs soil contamination

2018 ◽  
Vol 9 ◽  
Author(s):  
Volodymyr Grabovskyi ◽  
Orest Dzendzelyuk
1991 ◽  
Vol 222 ◽  
Author(s):  
B. Johs ◽  
J. L. Edwards ◽  
K. T. Shiralagi ◽  
R. Droopad ◽  
K. Y. Choi ◽  
...  

ABSTRACTA modular spectroscopic ellipsometer, capable of both in-situ and ex-situ operation, has been used to measure important growth parameters of GaAs/AIGaAs structures. The ex-situ measurements provided layer thicknesses and compositions of the grown structures. In-situ ellipsometric measurements allowed the determination of growth rates, layer thicknesses, and high temperature optical constants. By performing a regression analysis of the in-situ data in real-time, the thickness and composition of an AIGaAs layer were extracted during the MBE growth of the structure.


2002 ◽  
Vol 753 ◽  
Author(s):  
Martin A. Crimp ◽  
Boon-Chi Ng ◽  
Benjamin A. Simkin ◽  
Thomas R. Bieler

ABSTRACTTo gain a better understanding of the ductility limitations in TiAl alloys, the mechanisms involved in deformation strain transfer and/or microcrack initiation at grain boundaries have been examined in an equiaxed near-γ alloy. These studies have been carried out on both in-situ and ex-situ deformed bulk samples using scanning electron microscopy (SEM) techniques for both orientation analysis and deformation defect imaging. Selected area electron channeling patterns (SACPs) have allowed determination of grain orientations, eliminating ambiguity between the a and c axes. Deformation twins and dislocations have been imaged in the bulk samples using electron channeling contrast imaging (ECCI). A combination of ECCI contrast analysis and trace analysis based on orientations determined from SACP has allowed identification of the active deformation systems. Microcracks have been found to initiate at γ-γ boundaries as a result of an inability to adequately transfer twin strain from grain to grain. Once initiated, cracks propagate through cleavage and re-nucleation of grain boundary microcracks in front of the advancing crack. A geometric based predictive factor has been developed that accounts for microcrack initiation at γ-γ boundaries based in deformation twinning and strain accommodation by ordinary dislocations.


2005 ◽  
Vol 482 ◽  
pp. 355-358 ◽  
Author(s):  
S. Kúdela ◽  
H. Wendrock ◽  
L. Ptáček ◽  
S. Menzel ◽  
K. Wetzig

Fibers fracture in tensile strained Mg and MgLi matrix composites strengthened with ~10% vol. short δ-Al2O3 fibers (Saffil) is investigated by „in-situ“ scanning electron microscopy and ex-situ“ determination of the length of fibers chemically recovered from tensile failed composites. Little interfacial reaction in Mg matrix composite results in poor interfacial bond so that composite failure proceeds via fiber pull-out with negligible fiber fragmentation. On the other hand, extensive fiber/matrix reaction in MgLi matrix composites promotes formation of strong interfaces which are linked with multiple fiber cross-breakage during tensile straining. These results are consistent with experimental tensile strengths of related composites.


2021 ◽  
Vol 14 (2) ◽  
pp. 56-65
Author(s):  
V. P. Ramzaev ◽  
A. N. Barkovsky ◽  
A. A. Bratilova

The collection of representative soil samples in the territory of settlements and subsequent measurements of the content of radionuclides in these samples under laboratory conditions (the so-called “ex situ method”) is a generally accepted technology for determining the density of soil contamination with 137Cs in the populated areas contaminated due to the Chernobyl accident. Recently, as a supplement or alternative to the ex situ method, researchers are developing field (in situ) gamma-spectrometry methods. These methods allow determining the density of soil contamination with 137Cs directly on site, without soil sampling and laboratory analysis. At the same time, the in situ methodology has several limitations, the most important of which is a lack of generally recognized metrological basis for measurements and interpretation of results. Hence, before using a particular technique and measuring device for carrying out large-scale in situ measurements, it is necessary to validate (to assess the suitability) of the selected in situ method using an established ex situ method. The aim of this study was to validate the method for determining the density of 137Cs soil contamination in kitchen gardens using the MKS AT6101D spectrometer-dosimeter in situ. The method was recently presented by a Russian-Swedish-Belarusian group of researchers in an article published in the Journal of Environmental Radioactivity (https://doi.org/10.1016/j.jenvrad.2021.106562). To validate this method, we selected 10 representative kitchen garden plots. The plots were located in six settlements of the Bryansk region in Russia. The territory of the settlements had been heavily contaminated with 137Cs as a result of the Chernobyl accident: the officially established levels of the density of soil contamination by 137Cs ranged from 111 to 511 kBq/m2 in 2017. Field gamma-ray spectra were recorded at a height of 1 m above the ground in the center of kitchen garden plots using the MKS AT6101D device. The measurement duration was in the range of 1207–1801 s (the mean value = 1383 s). Samples of soil in the kitchen gardens were taken layer by layer (with a step of 5 cm) to a depth of 20 cm using a demountable cylindrical sampler. The 137Cs content in each soil layer was determined in the laboratory using a stationary semiconductor gamma spectrometer. The values of the 137Cs contamination density of the sampled soils ranged from 77 to 548 kBq/m2. It was found that the results of the ex situ analyzes of soil samples were in a good agreement with the contamination density values obtained with the in situ method. On average, the difference between two methodologies was 7% (a maximum of 20%). The results of the study confirm that the method proposed by the international group is suitable for determining the density of soil contamination by 137Cs in kitchen gardens in remote period after the Chernobyl accident.


2011 ◽  
Vol 95 (2) ◽  
pp. 809-815 ◽  
Author(s):  
G. B. González ◽  
T. O. Mason ◽  
J. S. Okasinski ◽  
T. Buslaps ◽  
V. Honkimäki
Keyword(s):  
Ex Situ ◽  

1992 ◽  
Vol 33 (1) ◽  
pp. 1-12 ◽  
Author(s):  
J Birnie ◽  
C Craggs ◽  
D.J Gardiner ◽  
P.R Graves

1991 ◽  
Vol 250 ◽  
Author(s):  
Max Klein ◽  
Bernard Gallois

AbstractA laser scattering apparatus was developed for the determination of surface roughness and other surface statistical parameters of chemically vapor-deposited coatings. Visual examination of HeNe laser scattering patterns reflected from polished sapphire and CVD titanium nitride surfaces showed a sensitivity to roughness differences of tens of nanometers. The scattering apparatus was integrated with a cold-wall CVD reactor. The root mean square roughness of silicon carbide deposits on silicon in the early stages of growth was determined from the intensity of the specularly reflected beam. Changes in roughness and the spatial arrangement of depositing crystallites were monitored in situ by angular resolution of the scattered light spectra. Both ex situ and in situ results were in good agreement with profilometric examinations of the rough surfaces.


1984 ◽  
Vol 37 ◽  
Author(s):  
I. P. Delrue ◽  
M. Wittmer ◽  
T. S. Kuan ◽  
R. Ludeke

AbstractIn situ Reflection High Energy Electron Diffraction and ex-situ Transmission Electron Diffraction and Ion Channeling have been applied to a reacted Pd-GaAs interface and the results obtained are critically compared. The investigation has been done on the stabilized c(2×8) surface obtained by MBE on GaAs(100) substrates. Smooth surface epitaxial growth has been observed by RHEED as soon as a few monolayers of Pd are deposited at a substrate temperature of about 325°C. TEM diffraction studies indicate the presence of an intermetallic hexagonal structure similar to the orthorhombic Pd5Ga2 but with slightly different lattice parameters due to the possible incorporation of As. A less abundant phase was also identified as an hexagonal structure similar to Pd8As2. Ion Channeling indicates pronounced reduction in scattering yield when the [100] axis of the substrate was aligned with the impinging beam, thus supporting the RHEED analysis. The three techniques listed above were found to be useful for the determination of the epitaxial relationship between the identified phases and the substrate.


Sign in / Sign up

Export Citation Format

Share Document