Characteristics, structure, mechanisms of functioning and modern aspects of digital production system introduction in mechanical engineering

2018 ◽  
Vol 2018 (8) ◽  
pp. 25-32 ◽  
Author(s):  
Александр Ингеманссон ◽  
Aleksandr Ingemansson
Keyword(s):  
Production System ◽  
Mechanical Engineering ◽  
Production Systems ◽  
Modern Trend ◽  
Subject Field ◽  
Technological Control ◽  
Digital Production ◽  
Modern Level ◽  
And Storage

In the work it is defined that digital production systems (DPS) introduction is a modern trend to increase mechanical engineering efficiency and a subject field of the “Technet” measure plan of the National Technological Initiative of the RF up to 2035. There is offered a structure and mechanisms of DPS functioning for machining production. The aspects of DPS introduction taking into account a modern level of technological, control, transport and storage equipment are analyzed.

Prospects for the development of agrarian production systems in in the Right Bank Polesie of Ukraine

2018 ◽  
Vol 2 (95) ◽  
pp. 69-72
Author(s):  
Yu.A. Tarariko ◽  
L.V. Datsko ◽  
M.O. Datsko
Keyword(s):  
Agricultural Production ◽  
Production Systems ◽  
Economic Feasibility ◽  
Capital Investments ◽  
Resource Potential ◽  
Grain Processing ◽  
Processing And Storage ◽  
The Right ◽  
And Storage ◽  
Agricultural Production Systems

The aim of the work is to assess the existing and prospective models for the development of agricultural production in Central Polesie on the basis of economic feasibility and ecological balance. The evaluation of promising agricultural production systems was carried out with the help of simulation modeling of various infrastructure options at the levels of crop and multisectoral specialization of agroecosystems. The agro-resource potential of Central Polesie is better implemented in the rotation with lupine, corn and flax dolguntsem with well-developed infrastructure, including crop, livestock units, grain processing and storage systems, feed, finished products and waste processing in the bioenergetic station. The expected income for the formation of such an infrastructure is almost 8 thousand dollars. / with a payback period of capital investments of 2-3 years.

Making the Most of the Internet for Failure Analysis

1998 ◽  
Author(s):  
Dan J. Bodoh
Keyword(s):  
New Media ◽  
Failure Analysis ◽  
Digital Media ◽  
Optimization Theory ◽  
The Internet ◽  
Digital Medium ◽  
Production Distribution ◽  
Digital Production ◽  
Computer Monitors ◽  
And Storage

Abstract The growth of the Internet over the past four years provides the failure analyst with a new media for communicating his results. The new digital media offers significant advantages over analog publication of results. Digital production, distribution and storage of failure analysis results reduces copying costs and paper storage, and enhances the ability to search through old analyses. When published digitally, results reach the customer within minutes of finishing the report. Furthermore, images on the computer screen can be of significantly higher quality than images reproduced on paper. The advantages of the digital medium come at a price, however. Research has shown that employees can become less productive when replacing their analog methodologies with digital methodologies. Today's feature-filled software encourages "futzing," one cause of the productivity reduction. In addition, the quality of the images and ability to search the text can be compromised if the software or the analyst does not understand this digital medium. This paper describes a system that offers complete digital production, distribution and storage of failure analysis reports on the Internet. By design, this system reduces the futzing factor, enhances the ability to search the reports, and optimizes images for display on computer monitors. Because photographic images are so important to failure analysis, some digital image optimization theory is reviewed.

scholarly journals Soil Bacterial Community Diversity and Composition as Affected by Tillage Intensity Treatments in Corn-Soybean Production Systems

2021 ◽  
Vol 12 (1) ◽  
pp. 157-172
Author(s):  
Shankar G. Shanmugam ◽  
Normie W. Buehring ◽  
Jon D. Prevost ◽  
William L. Kingery
Keyword(s):  
Microbial Community ◽  
Bacterial Community ◽  
Community Composition ◽  
Production System ◽  
Soil Microbial Community ◽  
Production Systems ◽  
Bacterial Community Composition ◽  
Soybean Production ◽  
Soil Microbial ◽  
Soil Bacterial

Our understanding on the effects of tillage intensity on the soil microbial community structure and composition in crop production systems are limited. This study evaluated the soil microbial community composition and diversity under different tillage management systems in an effort to identify management practices that effectively support sustainable agriculture. We report results from a three-year study to determine the effects on changes in soil microbial diversity and composition from four tillage intensity treatments and two residue management treatments in a corn-soybean production system using Illumina high-throughput sequencing of 16S rRNA genes. Soil samples were collected from tillage treatments at locations in the Southern Coastal Plain (Verona, Mississippi, USA) and Southern Mississippi River Alluvium (Stoneville, Mississippi, USA) for soil analysis and bacterial community characterization. Our results indicated that different tillage intensity treatments differentially changed the relative abundances of bacterial phyla. The Mantel test of correlations indicated that differences among bacterial community composition were significantly influenced by tillage regime (rM = 0.39, p ≤ 0.0001). Simpson’s reciprocal diversity index indicated greater bacterial diversity with reduction in tillage intensity for each year and study location. For both study sites, differences in tillage intensity had significant influence on the abundance of Proteobacteria. The shift in the soil bacterial community composition under different tillage systems was strongly correlated to changes in labile carbon pool in the system and how it affected the microbial metabolism. This study indicates that soil management through tillage intensity regime had a profound influence on diversity and composition of soil bacterial communities in a corn-soybean production system.

A New Procedure of Production Orders Sequencing in Mixed-Model Production Systems

2014 ◽  
Vol 1036 ◽  
pp. 864-868 ◽  
Author(s):  
Marcin Zemczak ◽  
Damian Krenczyk
Keyword(s):  
Task Scheduling ◽  
Production System ◽  
Mixed Model ◽  
Production Systems ◽  
Production Capacity ◽  
Approximate Solutions ◽  
Task Sequence ◽  
Optimal Method ◽  
Sequencing Problem ◽  
Car Sequencing

The paper presents the task scheduling issue, which main aim is to establish a proper sequence of tasks, that would maximize the utilization of companys production capacity. According to the literature sources, the presented sequencing problem, denoted as CSP (Car Sequencing Problem) belongs to the NP-hard class, as has been proven by simple reduction from Hamiltonians Path problem. Optimal method of solution has not yet been found, only approximate solutions have been offered, especially from the range of evolutionary algorithms. Regardless of specific production system, while considering reception of new tasks into the system, current review of the state of the system is required in order to decide whether and when a new order can be accepted for execution. In this paper, the problem of task scheduling is limited to the specific existing mixed-model production system. The main goal is to determine the effective method of creation of task sequence. Through the use of computational algorithms, and automatic analysis of the resulting sequence, rates of production are able to be checked in a real time, and so improvements can be proposed and implemented.

scholarly journals Using Computer Simulation Method to Improve Throughput of Production Systems by Buffers and Workers Allocation

2015 ◽  
Vol 6 (4) ◽  
pp. 60-69 ◽  
Author(s):  
Sławomir Kłos ◽  
Peter Trebuna
Keyword(s):  
Computer Simulation ◽  
Production System ◽  
Production Systems ◽  
Simulation Method ◽  
System Throughput ◽  
Buffer Allocation ◽  
Simulation Experiments ◽  
Buffer Capacities ◽  
The Relationship ◽  
Support Decision Making

Abstract This paper proposes the application of computer simulation methods to support decision making regarding intermediate buffer allocations in a series-parallel production line. The simulation model of the production system is based on a real example of a manufacturing company working in the automotive industry. Simulation experiments were conducted for different allocations of buffer capacities and different numbers of employees. The production system consists of three technological operations with intermediate buffers between each operation. The technological operations are carried out using machines and every machine can be operated by one worker. Multi-work in the production system is available (one operator operates several machines). On the basis of the simulation experiments, the relationship between system throughput, buffer allocation and the number of employees is analyzed. Increasing the buffer capacity results in an increase in the average product lifespan. Therefore, in the article a new index is proposed that includes the throughput of the manufacturing system and product life span. Simulation experiments were performed for different configurations of technological operations.

Responsive Production Systems and Roles that Robots can Play

2009 ◽  
Vol 62-64 ◽  
pp. 275-292
Author(s):  
R.H. Weston
Keyword(s):  
Building Block ◽  
Production System ◽  
World Wide ◽  
Production Systems ◽  
Industrial Robots ◽  
Robotic Systems ◽  
Different Types ◽  
Useful Lifetime

With increased product dynamics world-wide, the average economic lifetime of production systems is falling. Industrial robots are widely assumed to be inherently flexible and therefore that they can function as a programmable building block of response production systems. This paper reviews common capabilities of contemporary industrial robotic systems and investigates their capability to extend the useful lifetime of production system by coping with different types of product dynamic. Also considered are relative capabilities of conventional programmable robots and an emerging generation of programmable and configurable component-based machines.

System dynamics modelling of fixed and dynamic Kanban controlled production systems: a supply chain perspective

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Jagan Mohan Reddy K. ◽  
Neelakanteswara Rao A. ◽  
Krishnanand Lanka ◽  
PRC Gopal
Keyword(s):  
Supply Chain ◽  
System Dynamics ◽  
Cycle Time ◽  
Production System ◽  
Demand Uncertainty ◽  
Production Systems ◽  
Decision Variable ◽  
Content Type ◽  
Pull Production ◽  
Kanban System

Purpose Pull production systems have received much attention in the supply chain management environment. The number of Kanbans is a key decision variable in the pull production system as it affects the finished goods inventory (FGI) and backorders of the system. The purpose of this study is to compare the performance of the fixed and dynamic Kanban systems in terms of operational metrics (FGI and backorders) under the demand uncertainty. Design/methodology/approach In this paper, the system dynamics (SD) approach was used to model the performance of fixed and dynamic Kanban based production systems. SD approach has enabled the feedback mechanism and is an appropriate tool to incorporate the dynamic control during the simulation. Initially, a simple Kanban based production system was developed and then compared the performance of production systems with fixed and dynamic controlled Kanbans at the various demand scenarios. Findings From the present study, it is observed that the dynamic Kanban system has advantages over the fixed Kanban system and also observed that the variation in the backorders with respect to the demand uncertainty under the dynamic Kanban system is negligible. Research limitations/implications In a just-in-time production system, the number of Kanbans is a key decision variable. The number of Kanbans is mainly depended on the demand, cycle time, safety stock factor (SSF) and container size. However, this study considered only demand uncertainty to compare the fixed and dynamic Kanban systems. This paper further recommends researchers to consider other control variables which may influence the number of Kanbans such as cycle time, SSF and container size. Originality/value This study will be useful to decision-makers and production managers in the selection of the Kanban systems in uncertain demand applications.

scholarly journals Surface lime and silicate application and crop production system effects on physical characteristics of a Brazilian Oxisol

Soil Research ◽  
2017 ◽  
Vol 55 (8) ◽  
pp. 778
Author(s):  
G. S. A. Castro ◽  
C. A. C. Crusciol ◽  
C. A. Rosolem ◽  
J. C. Calonego ◽  
K. R. Brye
Keyword(s):  
Physical Properties ◽  
Bulk Density ◽  
Production System ◽  
Crop Production ◽  
Management Practices ◽  
Production Systems ◽  
Crop Productivity ◽  
Soil Physical Properties ◽  
Physical Characteristics ◽  
Forage Crop

This work aimed to evaluate the effects of crop rotations and soil acidity amelioration on soil physical properties of an Oxisol (Rhodic Ferralsol or Red Ferrosol in the Australian Soil Classification) from October 2006 to September 2011 in Botucatu, SP, Brazil. Treatments consisted of four soybean (Glycine max)–maize (Zea mays)–rice (Oryza sativa) rotations that differed in their off-season crop, either a signal grass (Urochloa ruziziensis) forage crop, a second crop, a cover crop, or fallow. Two acid-neutralising materials, dolomitic lime (effective calcium carbonate equivalent (ECCE) = 90%) and calcium-magnesium silicate (ECCE = 80%), were surface applied to raise the soil’s base saturation to 70%. Selected soil physical characteristics were evaluated at three depths (0–0.1, 0.1–0.2, and 0.2–0.4 m). In the top 0.1 m, soil bulk density was lowest (P < 0.05) and macroporosity and aggregate stability index were greatest (P < 0.05) in the forage crop compared with all other production systems. Also, bulk density was lower (P < 0.05) and macroporosity was greater (P < 0.05) in the acid-neutralising-amended than the unamended control soil. In the 0.1–0.2-m interval, mean weight diameter and mean geometric diameter were greater (P < 0.05) in the forage crop compared with all other production systems. All soil properties evaluated in this study in the 0.2–0.4-m interval were unaffected by production system or soil amendment after five complete cropping cycles. Results of this study demonstrated that certain soil physical properties can be improved in a no-tillage soybean–maize–rice rotation using a forage crop in the off-season and with the addition of acid-neutralising soil amendments. Any soil and crop management practices that improve soil physical properties will likely contribute to sustaining long-term soil and crop productivity in areas with highly weathered, organic matter-depleted, acidic Oxisols.

Empirical Study on Process Optimization of MTO Production Systems

2011 ◽  
Vol 317-319 ◽  
pp. 2302-2305
Author(s):  
Ying Ying Guan ◽  
Bi Xi Zhang ◽  
Jing Song
Keyword(s):  
Empirical Study ◽  
Process Optimization ◽  
Production System ◽  
Production Systems ◽  
Make To Order ◽  
Structural Entropy ◽  
Degree Of Order

Based on the structural entropy, this paper establishes a model for analyzing the degree of order of different structure of small or medium sized make-to-order stationery enterprise by using system limitation entropy and quality entropy. This quantificational method to evaluate the process optimization of production system is well validated.

Sign in / Sign up

Export Citation Format

Share Document