scholarly journals Effect of different sowing times and spacings on growth, yield and quality of water spinach (Ipomoea reptans Poir.) under terai region of West Bengal

2014 ◽  
Vol 6 (2) ◽  
pp. 489-494
Author(s):  
R. K. Sarkar ◽  
J. C. Jana ◽  
S. Datta
Keyword(s):  
Seed Yield ◽  
West Bengal ◽  
Seed Quality ◽  
Growth Yield ◽  
Water Spinach ◽  
Seedling Vigour ◽  
Sowing Time ◽  
Economic Point ◽  
Quality Of Water

An experiment was conducted to find out suitable sowing time and spacing as to increase the production of both green and seed yield and its quality of water spinach (Ipomoea reptans Poir.) during the year 2007-08 and 2008-09. The experiment was comprised of three sowing times (1st week of May; 1st week of June and 1st week July) and three spacings (30 cm × 15 cm; 30 cm ×30 cm and 30 cm ×45 cm). It was found that early sowing on 1st week of May and closest spacing of 30 cm ×15 cm alone and their combination executed best results with respect to all parameters. The sowing on 1st week of May with closest spacing of 30 cm ×15 cm produced about 3.26 times higher green yield (18.83 t/ha). On the other hand, sowing on 1st week of June with 30 cm ×15 cm spacing contributed 52.95 percent higher seed yield (0.78 t/ha). All the seed quality testing parameters viz. shelling percentage (62.53), 1000 seed weight (40.56 g), germination percentage (82.40), seedling vigour index (5.38) and seedling growth rate (0.091 g/plant/day) were observed to be highest in 1st week of June with widest spacing of 30 cm ×45 cm. On economic point of view, the combination of 1st week of May along with 30 cm ×15 cm spacing was noticed to be superior amongst all other treatment combinations and that may be adopted for its commercial cultivation in medium to upland situation under terai region of West Bengal.

scholarly journals Effect of boron and zinc application on growth, seed yield and seed quality of water spinach (Ipomoea reptans Poir.) under terai region of West Bengal

2017 ◽  
Vol 9 (3) ◽  
pp. 1696-1702 ◽  
Author(s):  
R. K. Sarkar ◽  
J. C. Jana ◽  
S. Datta
Keyword(s):  
Seed Yield ◽  
West Bengal ◽  
Seed Quality ◽  
Cost Ratio ◽  
Water Spinach ◽  
Soil Application ◽  
Foliar Sprays ◽  
Quality Of Water ◽  
Zinc Application

The field experiment was conducted at the Instructional Farm, Uttar Banga Krishi Viswavidyalaya, Pundibari, Cooch Behar, West Bengal to study the effect of boron and zinc application on growth, seed yield and its quality of water spinach (Ipomoea reptans Poir.). The study consisted of borax @ 0 (B0), 25 kg/ha through soil (B1) and 1.5 g/litre twice through foliar sprays at 15 days interval (B2) and ZnSO4 @ 0 (Zn0), 15 kg/ha through soil (Zn1) and 1.5 g/litre twice foliar sprays at 15 days interval (Zn2) and their nine treatment combinations (viz. B0 Zn0, B1 Zn0, B2 Zn0, B0Zn1, B1 Zn1, B2 Zn1, B0Zn2, B1 Zn2 and B2 Zn2. The results revealed that application of boron and zinc at all rates alone and as combinations markedly influenced all growth, seed yield and its quality parameters as compared with the control. Soil application of borax @ 25 kg/ha and ZnSO4 @ 15 kg/ha alone and as combination recorded maximum number of flowers/hill (282.6, 275.1 & 311.5), number of capsules/hill (238.2, 220.7 & 257.8), seed yield (1.22 t/ha, 1.21 t/ha & 1.32 t/ha), shelling percentage (67.14%, 67.06% & 68.76%), 1000 seed weight (38.05 g, 38.25 g & 41.16 g), germination percentage (86.6%, 86.3% & 90.0%), seedling vigour index (6.20, 6.26 & 6.63) and seedling growth rate (0.123, 0.123 and 0.127 g/plant/day), respectively over control. Maximum vine length, number of nodes per plant, average internode length and chlorophyll content of leaf were found in twice foliar sprays of bo-rax @ 1.5 g/litre (B2) and twice foliar sprays of ZnSO4 @ 1.5 g/litre (Zn2) individually as well as their combination (B2Zn2). Considering the benefit : cost ratio (B: C ratio), combination of both soil application of borax @ 25 kg/ha and ZnSO4 @ 15 kg/ha (B1Zn1) was found most economical (2.60).

Effect of NPK on growth, yield and seed quality of hybrid Chilli

2019 ◽  
Vol 9 (1) ◽  
pp. 35-41
Author(s):  
M Hasan ◽  
M Robbani ◽  
R Parvin ◽  
MNH Mehedi ◽  
I Hossain
Keyword(s):  
Seed Yield ◽  
Seed Quality ◽  
Seed Viability ◽  
Growth Yield ◽  
Control Treatment ◽  
Npk Fertilizers ◽  
Seed Vigour ◽  
Female Line ◽  
Long Time

An experiment was carried out at Germplasm Centre and Plant Biotechnology Lab, Department of Horticulture, PSTU to evaluate the growth, seed yield and quality of hybrid F1 chilli (cv. Sonic) crossing male line (LTSL-004-M) and female line (LTSL-004-F) along the viability of productive seeds influenced by NPK fertilizers during the period from November 2015 to October 2016. Ten different treatments of NPK fertilizers were used. Result showed that all the characteristics except primary branches and1000 seed weight were influenced significantly due to the application of NPK fertilizers. The tallest plant (69.88 cm), more leaves plant–1 (2491.33), highest number of secondary branches plant-1, tertiary branches plant-1 (5.00 and 88.00, respectively), number of flowers and hybrid fruits plant–1 (1533.00 and 12.33, respectively) and weight of seeds (4.03 g plant–1) along with required more time (54.67 days) for flowering were obtained from the application of 145 kg N ha–1, 175 kg P ha–1 and 96 kg K ha–1 (T4) which produced the highest final seed yield of chilli (4.03 kg ha–1). Application of T5 and T9 showed the highest number of primary branches (2.33). In seed viability characteristics T9 treated seeds showed the highest germination (100, 97.33 and 94.97%) at 1st, (1 MAH - Month After Harvest), 2nd (2 MAH) and 3rd (4 MAH) observations, respectively. The T3 treated seeds performed well in respect of Seed Vigour Index (SVI) at 1st and 2nd observations (8.00 and 7.48, respectively) but T9 treated seeds showed the highest SVI (6.32) at 3rd observation. Above indicating all characteristics were lowest under only recommended doses of NPK T1 as control treatment except days to first flowering. The observations suggested that production of hybrid chilli seeds could be enhanced by applying T4. While seeds of chilli treated by T9 in field level showed long time viable. Application of 145 kg N ha–1, 175 kg P ha–1 and 96 kg K ha–1 may be suggested for seed production of chilli and 110 kg N ha–1, + 175 kg P ha–1 + 115 kg K ha–1 for keeping the long time seed viability. Int. J. Agril. Res. Innov. & Tech. 9 (1): 35-41, June, 2019

Effect dates of sowing and cutting time on seed yield and quality of alfalfa (Medicago sativa L.) CV. RL-88

2017 ◽  
Vol 51 (05) ◽  
Author(s):  
P.R. Arvind Kumar ◽  
B. C. Channakeshava ◽  
R. Siddaraju
Keyword(s):  
Seed Yield ◽  
Seed Quality ◽  
Dry Weight ◽  
Quality Parameters ◽  
Seedling Vigour ◽  
Yield And Quality ◽  
Seedling Length ◽  
Sowing Dates ◽  
Vigour Index

An experiment was carried to find out the effect of sowing dates and cutting time on seed yield and quality of alfalfa cv. RL-88. The results of the experiment revealed that, the significantly higher seed yield per plant (1.491 g), seed yield per plot (161.07 g) and seed yield (355.00 kg ha-1) was noticed in 15th August sowing and the cutting carried out at 60 days after sowing. Whereas, the seed quality parameters of the resultant seeds viz., highest seed germination (95.00 %), seedling length (13.90 cm), seedling dry weight (412.69 mg) and seedling vigour index (1320) found highest in15th August sowing and the cutting followed at 60 days after sowing.

scholarly journals Effect of zinc and boron on seed yield and quality of onion (Allium cepa L.)

2021 ◽  
Vol 16 (1) ◽  
pp. 87-92
Author(s):  
S. H. Arunkumar ◽  
Jitendra Kumar S. Hilli ◽  
D. S. Uppar
Keyword(s):  
Seed Yield ◽  
Zinc Sulphate ◽  
Seed Quality ◽  
Foliar Application ◽  
Block Design ◽  
Foliar Spray ◽  
Quality Parameters ◽  
Seedling Vigour ◽  
Yield And Quality

The field experiment was carried out in the olericulture unit, MARS, University of Agricultural Sciences, Dharwad during 2019-2020 to study the effect of zinc and boron on seed yield and quality of onion on variety cv. Bhima super at different levels of both basal and foliar application. The treatments consists of soil application of zinc sulphate (5 kg/ha and 10 kg/ ha), Borax (4 kg/ha and 6 kg/ha) and foliar application of zinc sulphate (0.25 % and 0.5 %), Borax (0.1 % and 0.2 %) and control without micronutrient application replicated thrice in a Randomized Block Design. The foliar application was given at 45 days after bulb planting. From the present investigation, a significant increase in seed yield and quality parameters were recorded with foliar spray of zinc sulphate (0.5 %) and borox (0.2 %) viz., seed yield per plant (4.29 g), seed yield per plot (214.13 g) and seed yield per hectare (9.91q/ha). The germination percentage was found maximum from the treatment foliar application of zinc sulphate (0.5 %) (84.8%) and the other seed quality parameters was found best from the treatment foliar spray of ZnSO4 (0.5%) and B (0.2 %) i.e., higher shoot length (8.83 cm), root length (7.21 cm), seedling vigour index (1352) and test weight (3.75 g). The non-significant differences were observed due to influence of soil and foliar application of zinc and boron on electrical conductivity and seedling dry weight.

scholarly journals Effect of Sowing Time Based Temperature Variations on Growth, Yield and Seed Quality of Garden Pea

2016 ◽  
Vol 19 (1) ◽  
pp. 29-36
Author(s):  
MZ Ali ◽  
MA Aziz ◽  
MAI Sarker ◽  
S Mazumder ◽  
SK Paul ◽  
...  
Keyword(s):  
Seed Quality ◽  
Maximum Yield ◽  
Growth Yield ◽  
Crop Growth ◽  
Growth Duration ◽  
Sowing Time ◽  
Garden Pea ◽  
Temperature Variations ◽  
Sowing Dates

A field experiment was conducted at the research field of Agronomy Division, BARI, Joydebpur, Gazipur and ARS, Burirhat, Rangpur to evaluate crop growth, yield and seed quality of garden pea in prevailing temperature at different sowing dates (10 November, 20 November, 30 November, 10 December, 20 December and 30 December). Sowing date based temperature variations significantly affected the crop growth, TDM production, yield and seed quality of BARI Motorshuti-3. Plants with November 20-30 sowing performed the best in respect of yield and yield contributing characters. However, with the delayed in sowing dates, the temperatures at the later growth phases were increased, while the grain growth duration, grain yield and grain quality decreased substantially. Results revealed that November 20-30 would be the optimum time of sowing for maximum yield with quality seed production of garden pea in Bangladesh.Bangladesh Agron. J. 2016, 19(1): 29-36

scholarly journals Effect of cutting frequencies and nitrogen levels on growth, green and seed yield and quality of water spinach (Ipomoea reptans Poir.)

2014 ◽  
Vol 6 (2) ◽  
pp. 545-551
Author(s):  
R. K. Sarkar ◽  
J. C. Jana ◽  
S. Datta
Keyword(s):  
Seed Yield ◽  
Seed Quality ◽  
Fertilizer Application ◽  
Quality Parameters ◽  
Quality Parameter ◽  
Water Spinach ◽  
Nitrogen Levels ◽  
Commercial Cultivation ◽  
Yield And Quality

To study the effect of cutting frequencies and nitrogen levels on growth, green and seed yield and quality of upland water spinach (Ipomoea reptans Poir.) an experiment was undertaken with four cutting frequencies (C0 = no cutting; C1 = one cutting at 45 days after sowing (DAS); C2 = two cutting at 45 and 65 DAS and C3 = three cutting at 45, 65 and 85 DAS) and five nitrogen levels (N0 = no application; N1 = 50 kg/ha; N2 = 100 kg/ha; N3 = 150 kg/ha and N4 = 200 kg/ha). Results revealed that all growth, seed yield and seed quality attributes were found to decrease significantly with higher cutting frequencies, whereas, reverse effects on all physiological attributes, green yield and its quality parameters. On the other hand, nitrogen level (upto 150 kg N/ha) had significant effect and all these parameters. The highest green yield was recorded at three cuttings and 150 kg N/ha individually and also at their interaction (16.34, 12.57 and 17.77 t/ha, respectively). Maximum value of quality parameter like vitamin A (3072.9 μg/100 g) was recorded in one cutting with 150 kg N/hectare, whereas, maximum ascorbic acid was recorded maximum (45.31 mg/100 g) in one cutting without N fertilizer application Maximum net profit of Rs. 114324.00 with B: C ratio of 2.22:1 was obtained with combination of three cuttings and 150 kg N/ha and that may be adopted for its commercial cultivation in medium to upland situation under terai region of West Bengal.

scholarly journals Plant spacing and pollen quantity on yield and quality of squash seeds

2003 ◽  
Vol 21 (3) ◽  
pp. 443-447 ◽  
Author(s):  
Márcio S. de Lima ◽  
Antonio I. I. Cardoso ◽  
Marcelo F. Verdial
Keyword(s):  
Seed Yield ◽  
Seed Quality ◽  
Block Design ◽  
Fruit Production ◽  
Plant Spacing ◽  
Plant Seed ◽  
Yield And Quality ◽  
Randomized Complete Block Design ◽  
Pollen Quantity

Squash seeds yield and quality can be improved by proper population plant spacing and the pollen quantity, which influences the pollination quality and fertilization. Nine experiments were conducted as a factorial combination of three spacing between plants (0.8 x 0.3, 0.8 x 0.6 and 0.8 x 0.9 m), two quantities of pollen (50% of an anther and another entire one) and natural insect pollination. Seed and fruit production parameters, and seed quality were evaluated. A randomized complete block design, five replications, with ten plants per plot was adopted. Larger plant spacing increased the average number of mature fruits and seed yield per plant. Seed yield was directly proportional to the amount of pollen used during pollination. Higher amounts of pollen resulted in higher seed yield per area, but the plant spacing did not affect this characteristic. Manual pollination, using a whole anther, did not differ from natural pollination in relation to seed yield and quality.

scholarly journals Assessing the Response of Sesame to Inorganic and Organic Nutrient Sources

2019 ◽  
Vol 12 (1) ◽  
pp. 108
Author(s):  
Paul Anguria ◽  
George N. Chemining’wa ◽  
Richard N. Onwonga ◽  
Michael A. Ugen
Keyword(s):  
Seed Yield ◽  
Finger Millet ◽  
Crop Residues ◽  
Seed Quality ◽  
Block Design ◽  
Mineral Fertilizers ◽  
Fertilizer Rate ◽  
Nutrient Sources ◽  
Randomized Complete Block Design

Sesame (Sesamum indicum. L) is one of the main sources of livelihoods in northern Uganda. However, its production is constrained by low soil fertility and moisture levels. A study was conducted at Serere, Uganda in 2013 and 2014 to investigate the effect of organo-mineral fertilizers on growth, seed yield and nutritional quality of sesame. The design of the experiment was a randomized complete block design with three replications. The treatments comprised: control (no soil amendment), mixtures of 4 crop residues each at (3 and 6 t/ha) and two rates of N, P and K. Finger millet husks (3 t/ha) plus lower fertilizer rate (30 kg N-25 kg P-40 Kg K/ha) had significantly higher seed yield of sesame; while finger millet husks (6 t/ha) plus higher fertilizer rate (60 kg N-50 kg P-80 Kg K/ha) significantly increased vegetative growth of sesame. Finger millet husks (6 t/ha) plus lower fertilizer rate had significantly higher seed crude protein content of sesame; while cowpea husks (3 t/ha) plus higher fertilizer rate and groundnut shells (3 t/ha) plus lower fertilizer rate produced significantly higher seed total ash and seed oil content of sesame, respectively. This study has demonstrated that application of a mixture of crop residues and inorganic fertilizers is the best treatment in enhancing growth, seed yield and nutritional seed quality of sesame.

Sign in / Sign up

Export Citation Format

Share Document