scholarly journals Comparison of Different DEM Generation Methods based on Open Source Datasets

2019 ◽  
Vol 26 (1) ◽  
pp. 63-85
Author(s):  
Aya M. Hapep ◽  
Maythm AL-Bakri
Keyword(s):  
Open Source ◽  
Google Earth ◽  
Fundamental Information ◽  
Natural Neighbor ◽  
Open Source Data ◽  
Digital Elevation ◽  
Gis Data ◽  
South Of Iraq ◽  
Elevation Model ◽  
Definition Of

Digital Elevation Model (DEM) is one of the developed techniques for relief representation.  The definition of a DEM construction is the modeling technique of earth surface from existing data. DEM plays a role as one of the fundamental information requirement that has been generally utilized in GIS data structures. The main aim of this research is to present a methodology for assessing DEMs generation methods. The DEMs data will be extracted from open source data e.g. Google Earth. The tested data will be compared with data produced from formal institutions such as General Directorate of Surveying. The study area has been chosen in south of Iraq (Al-Gharraf / Dhi Qar governorate. The methods of DEMs creation are kriging, IDW (inverse distance weight), spline, and natural neighbor. This research used different software for processing and analysis such as ArcGIS 10.2, TCX and Civil 3D. Two- sample t-test has been adopted to investigate the mean of elevation differences between compared datasets. The results showed that the spline is the best method that can be used to build DEM in this study area.

scholarly journals Evaluation of the Accuracy of Digital Elevation Model Produced from Different Open Source Data

2019 ◽  
Vol 25 (8) ◽  
pp. 100-112
Author(s):  
Raghad Hadi Hasan
Keyword(s):  
Open Source ◽  
Digital Elevation Model ◽  
Thermal Emission ◽  
Shuttle Radar Topography Mission ◽  
Google Earth ◽  
Reference Points ◽  
Aster Gdem ◽  
Digital Elevation ◽  
Elevation Model ◽  
High Level

This study aims to estimate the accuracy of digital elevation models (DEM) which are created with exploitation of open source Google Earth data and comparing with the widely available DEM datasets, Shuttle Radar Topography Mission (SRTM), version 3, and Advanced Spaceborne Thermal Emission and Reflection Radiometer Global Digital Elevation Model (ASTER GDEM), version 2. The GPS technique is used in this study to produce digital elevation raster with a high level of accuracy, as reference raster, compared to the DEM datasets. Baghdad University, Al Jadriya campus, is selected as a study area. Besides, 151 reference points were created within the study area to evaluate the results based on the values of RMS.Furthermore, the Geographic Information System (GIS) was utilized to analyze, imagine and interpolate data in this study. The result of the statistical analysis revealed that RMSE of DEM related to the differences between the reference points and Google Earth, SRTM DEM and ASTER GDEM are 6.9, 5.5 and 4.8, respectively. What is more, a finding of this study shows convergence the level of accuracy for all open sources used in this study.  

scholarly journals High spatial resolution digital elevation model (DEM) production using different interpolations techniques

2019 ◽  
Vol 11 (21) ◽  
pp. 116-126
Author(s):  
Israa Jameel Muhsin
Keyword(s):  
Spatial Resolution ◽  
University Campus ◽  
Interpolation Methods ◽  
Natural Neighbor ◽  
Digital Elevation ◽  
Global Positioning ◽  
Distance Weighted ◽  
Elevation Model ◽  
Accuracy Assessments ◽  
Inverse Distance

DEMs, thus, simply regular grids of elevation measurements over the land surface.The aim of the present work is to produce high resolution DEM for certain investigated region (i.e. Baghdad University Campus\ college of science). The easting and northing of 90 locations, including the ground-base and buildings of the studied area, have been obtained by field survey using global positioning system (GPS). The image of the investigated area has been extracted from Quick-Bird satellite sensor (with spatial resolution of 0.6 m). It has been geo-referenced and rectified  using 1st order polynomial transformation. many interpolation methods have been used to estimate the elevation such as ordinary Kriging, inverse distance weighted (IDW) and  natural neighbor methods. The mosaic  algorithm has then been applied between the base and building layers of studied area in order to perform the final DEM. The accuracy assessments of the interpolation methods have been calculated using the root-mean-square-error (RMSE) criterion. Finally, the estimated DEMs have been used to constructing 3-D views of the original image.

scholarly journals New discoveries on astronomical orientation of Inca site in Ollantaytambo, Peru

2015 ◽  
Vol 14 (2) ◽  
pp. 37-46
Author(s):  
Karolína Hanzalová ◽  
Jaroslav Klokočník ◽  
Jan Kostelecký
Keyword(s):  
Digital Elevation Model ◽  
Satellite Images ◽  
Observation Point ◽  
Google Earth ◽  
The Sun ◽  
Winter Solstice ◽  
Machu Picchu ◽  
Digital Elevation ◽  
Elevation Model ◽  
The Temple

<p>This paper deals with astronomical orientation of Incas objects in Ollantaytambo, which is located about 35 km southeast from Machu Picchu, about 40 km northwest from Cusco, and lies in the Urubamba valley. Everybody writing about Ollantaytambo, shoud read Protzen. (1)  He devoted his monograph to description and interpretation of that locality. Book of Salazar and Salazar (2) deals, among others, with the orientation of objects in Ollantaytambo with respect to the cardinal direction. Zawaski and Malville (3) documented astronomical context of major monuments of nine sites in Peru, including Ollantaytambo. We tested astronomical orientation in these places and confirm or disprove hypothesis about purpose of Incas objects. For assessment orientation of objects we used our measurements and also satellite images on Google Earth and digital elevation model from ASTER. The satellite images were used to estimate the astronomical-solar-solstice orientation, together with terrestrial images from Salazar and Salazar (2). The digital elevation model is useful in the mountains, where we need the actual horizon for a calculation of sunset and sunrise on specific days (solstices), which were for Incas people very important. We tested which astronomical phenomenon is connected with objects in Ollantaytambo. First, we focused on Temple of the Sun, also known the Wall of six monoliths.  We tested winter solstice sunrise and the rides of the Pleiades for the epochs 2000, 1500 and 1000 A.D. According with our results the Temple isn´t connected neither with winter solstice sunrise nor with the Pleiades. Then we tested also winter solstice sunset. We tried to use the line from an observation point near ruins of the Temple of Sun, to west-north, in direction to sunset. The astronomical azimuth from this point was about 5° less then we need. From this results we found, that is possible to find another observation point. By Salazar and Salazar (2) we found observation point at the corner (east rectangle) of the pyramid by <em>Pacaritanpu,</em> down by the riverside. There is a line connecting the east rectangular “platform” at the river, going along the Inca road up to vicinity of the Temple of the Sun and then in the direction to the Inca face. Using a digital elevation model we found the astronomical azimuth, which is needed for confirm astronomical orientation of the Temple. So, finally we are able to demonstrate a possibility of the solar-solstice orientation in Ollantaytambo.</p>

scholarly journals Distinguishing Glaciers between Surging and Advancing by Remote Sensing: A Case Study in the Eastern Karakoram

2020 ◽  
Vol 12 (14) ◽  
pp. 2297 ◽  
Author(s):  
Mingyang Lv ◽  
Huadong Guo ◽  
Jin Yan ◽  
Kunpeng Wu ◽  
Guang Liu ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Google Earth ◽  
High Mountain ◽  
Glacier Mass Balance ◽  
Visual Interpretation ◽  
Stable Mode ◽  
Optical Images ◽  
Digital Elevation ◽  
Glacier Surges ◽  
Elevation Model

The Karakoram has had an overall slight positive glacier mass balance since the end of 20th century, which is anomalous given that most other regions in High Mountain Asia have had negative changes. A large number of advancing, retreating, and surging glaciers are heterogeneously mixed in the Karakoram increasing the difficulties and inaccuracies to identify glacier surges. We found two adjacent glaciers in the eastern Karakoram behaving differently from 1995 to 2019: one was surging and the other was advancing. In order to figure out the differences existing between them and the potential controls on surges in this region, we collected satellite images from Landsat series, ASTER, and Google Earth, along with two sets of digital elevation model. Utilizing visual interpretation, feature tracking of optical images, and differencing between digital elevation models, three major differences were observed: (1) the evolution profiles of the terminus positions occupied different change patterns; (2) the surging glacier experienced a dramatic fluctuation in the surface velocities during and after the event, while the advancing glacier flowed in a stable mode; and (3) surface elevation of the surging glacier decreased in the reservoir and increased in the receiving zone. However, the advancing glacier only had an obvious elevation increase over its terminus part. These differences can be regarded as standards for surge identification in mountain ranges. After combining the differences with regional meteorological conditions, we suggested that changes of thermal and hydrological conditions could play a role in the surge occurrence, in addition, geomorphological characteristics and increasing warming climate might also be part of it. This research strongly contributes to the literatures of glacial motion and glacier mass change in the eastern Karakoram through remote sensing.

scholarly journals Nation-wide, general-purpose delineation of geomorphological slope units in Italy

2018 ◽  
Author(s):  
Massimiliano Alvioli ◽  
Ivan Marchesini ◽  
Fausto Guzzetti
Keyword(s):  
Adaptive Algorithm ◽  
Central Italy ◽  
Optimization Procedure ◽  
General Purpose ◽  
General Requirement ◽  
Italian Peninsula ◽  
Slope Unit ◽  
Digital Elevation ◽  
Elevation Model ◽  
Definition Of

Slope units are portions of terrain, defined by the general requirement of maximizing homogeneity within a single unit and heterogeneity between different ones. Slope units are being used to describe a variety of processes and to assess different natural hazards. An unambiguous and reproducible definition of slope units based on quantitative hydrologic and topographic criteria was previously provided by the r.slopeunits software to automatically draw slope unit polygons on a digital surface. The software contains an adaptive algorithm allowing for a flexible yet well-defined slope unit delineation, by means of an iterative procedure. It requires a digital elevation model and a few input parameters, whose values must be optimized in a sound way, by means of multiple software runs and a proper objective function. The code is designed to quickly produce results on large areas, and in this work we devised an optimization algorithm to delineate slope units over the whole Italian peninsula. We outline the rationale of the optimization procedure for a general purpose slope unit delineation within very large areas. We present preliminary results in Central Italy, specifically a slope unit mosaic in the whole area affected by the 2016 earthquake sequence. The procedure represents a well-defined framework for slope unit delineation over the whole of Italy.

scholarly journals Floods Risk Mapping and Assessing Vulnerability of Morang, Nepal

2021 ◽  
Author(s):  
Pawan Thapa ◽  
Narayan Thapa
Keyword(s):  
Drainage Density ◽  
Google Earth ◽  
Food And Agriculture ◽  
Food And Agriculture Organization ◽  
Digital Elevation ◽  
Two Factors ◽  
Flooding Risk ◽  
Elevation Model ◽  
The One ◽  
The Impact

Abstract Background: The impact of flooding rises due to unplanned settlements, especially in developing and underdeveloped countries. This study tries to address these issues by mapping flood risk places and assessing their impact on population and household.Methods: This study used the dataset available in Google Earth Engine (GEE), Food and Agriculture Organization (FAO), Central Bureau Statistics (CBS), Earth Data for preparing slope, drainage density, digital elevation model, rainfall, land use map, and soil map. These maps create using GEE and QGIS through overlay analysis that has two factors. The one is influence and other slopes, and it has provided high and low value according to its role on flooding.Results: The risk assessment shows around twenty-four percent population is at higher risk, whereas more than three thousand settlements are prone to flooding. It depicts a significant increasing trend of floods in the Morang district.Conclusion: This settlement risk map can help determine the flood safe and very high-risk areas in the Morang district. It will support residential places' planning by the local government, urban planners, and community people to reduce flooding risk.

scholarly journals Comparison of Vertical Accuracy of Open-Source Global Digital Elevation Models: A Case Study of Adama City, Ethiopia

2021 ◽  
Vol 12 (4) ◽  
pp. 1731-1744
Author(s):  
Hailu Zewde Abili
Keyword(s):  
Open Source ◽  
Thermal Emission ◽  
Accuracy Assessment ◽  
Shuttle Radar Topography Mission ◽  
Surface Model ◽  
Aster Gdem ◽  
Digital Elevation ◽  
Wide Range ◽  
Vertical Accuracy ◽  
Elevation Model

DEM can be generated from a wide range of sources including land surveys, Photogrammetry, and Remote sensing satellites. SRTM 30m DEM by The Shuttle Radar Topography Mission (SRTM), the Global Digital Elevation Model by Advanced Spaceborne Thermal Emission and Reflectance Radiometer (ASTER GDEM) and a global surface model called ALOS Worldview 3D 30 meter (AW3D30) by Advanced Land Observing Satellite (ALOS) are satellite-based global DEMs open-source DEM datasets. This study aims to assess the vertical accuracy of ASTER GDEM2, SRTM 30m, and ALOS (AW3D30) global DEMs over Ethiopia in the study area-Adama by using DGPS points and available accurate reference DEM data. The method used to evaluate the vertical accuracy of those DEMs ranges from simple visual comparison to relative and absolute comparisons providing quantitative assessment (Statistical) that used the elevation differences between DEM datasets and reference datasets. The result of this assessment showed better accuracy of SRTM 30m DEM (having RMSE of ± 4.63 m) and closely followed by ALOS (AW3D30) DEM which scored RMSE of ± 5.25 m respectively. ASTER GDEM 2 showed the least accuracy by scoring RMSE of ± 11.18 m in the study area. The second accuracy assessment was done by the analysis of derived products such as slope and drainage networks. This also resulted in a better quality of DEM derived products for SRTM than ALOS DEM and ASTER GDEM.

scholarly journals Floods Risk Mapping and Assessing Vulnerability of Morang, Nepal

2021 ◽  
Author(s):  
Pawan Thapa ◽  
Narayan Thapa
Keyword(s):  
Drainage Density ◽  
Google Earth ◽  
Food And Agriculture ◽  
Food And Agriculture Organization ◽  
Digital Elevation ◽  
Two Factors ◽  
Flooding Risk ◽  
Elevation Model ◽  
The One ◽  
The Impact

Abstract Background: The impact of flooding rises due to unplanned settlements, especially in developing countries. This study tries to address these issues by mapping flood risk places and assessing their impact on population and household.Methods: This study used the dataset available in Google Earth Engine (GEE), Food and Agriculture Organization (FAO), Central Bureau Statistics (CBS), Earth Data for preparing slope, drainage density, digital elevation model, rainfall, land use map, and soil map. These maps create using GEE and QGIS through overlay analysis that has two factors. The one is influence and other slopes, and it has provided high and low value according to its role on flooding.Results: The risk assessment shows around twenty-four percent population is at higher risk, whereas more than three thousand settlements are prone to flooding. It depicts a significant increasing trend of floods in the Morang district.Conclusion: This settlement risk map can help determine the flood safe and very high-risk areas in the Morang district. It will support residential places' planning by the local government, urban planners, and community people to reduce flooding risk.

scholarly journals استخدام نظم المعلومات الجغ ا رفية في إنشاء نموذج ارتفاع رقمي للكثبان الرملية

2013 ◽  
Vol 1 (1) ◽  
pp. 14-21
Author(s):  
Hussein M. Al-Khuzaie ◽  
Qassim J. Salman
Keyword(s):  
Sand Dunes ◽  
Google Earth ◽  
Digital Information ◽  
Space Images ◽  
Contour Maps ◽  
Contour Lines ◽  
Digital Elevation ◽  
Gis Technique ◽  
City District ◽  
Elevation Model

"In GIS, it is essential to use the areal and space images as data references for information, but it is necessary to create digital information using software such as SURFER 8 and ARC view. These data can be furnished to create digital contour lines map in a rapid way rather than the conventional methods. In this paper, GIS technique was used for producing 3 dimension contour maps for earth surface. This was called as Digital Elevation Model that can provide a view for spatial coordination for the location of these maps. The area was selected for this study is the sand dunes area at Al.Mamlaha (Samawa city district). The source of space images was Google Earth ."

Sign in / Sign up

Export Citation Format

Share Document