scholarly journals A study on the dispersion of I30E nanoclay in epoxy resin and bitumen matrix

2021 ◽  
Vol 63 (1) ◽  
pp. 55-59
Author(s):  
Thi Bich Thuy Nguyen ◽  
◽  
Ke The Ngo ◽  
Vinh Dieu Tran ◽  
Nhi Tru Nguyen ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Epoxy Resin ◽  
High Temperatures ◽  
Ultrasonic Vibration ◽  
Liquid Composition ◽  
Lower Molecular Weight ◽  
Mechanical Mixing ◽  
Xrd Techniques ◽  
Better Than

Dispersion of nanoclay in Epikote 828 resin is conducted by closed mixing of the liquid composition, mechanical mixing combined with ultrasonic vibration to form masterbatch; meanwhile, nanoclay dispersion in bitumen is processed by melted bitumen mixing. XRD techniques were used to determine the basal d-spacing of nanoclay. The dispersion was performed in Brabender mixer at temperature 40oC, speed 50 rpm, an Epikot/I30E=100/80 masterbatch provided the best dispersion with d001=33.818 Å. After mechanical mixing, an Epikote 828 composition with 4% I30E was sonicated for 5, 10, and 20 minutes. The value d001=41.65 Å achieved after 10 minutes of sonication was deemed optimal. Dispersion of 4% I30E in melted bitumen at 120, 130, 140, 150, and 160oC after 2h reached d001=49.5916 Å for the sample processed at 120oC. At high temperatures, penetration and delamination of bitumen were better than those of Epikote 828 despite the lower molecular weight of Epikote.

Reconstruction of Two-Dimensional Projections of GP 32*I

1981 ◽  
Vol 39 ◽  
pp. 38-39
Author(s):  
H.A. Cohen ◽  
W. Chiu ◽  
J. Hosoda
Keyword(s):  
Electron Microscopy ◽  
Molecular Weight ◽  
Uranyl Acetate ◽  
Distilled Water ◽  
Acetate Solution ◽  
Two Dimensional ◽  
Parent Molecule ◽  
T4 Bacteriophage ◽  
Electron Imaging ◽  
Better Than

GP 32 (molecular weight 35000) is a T4 bacteriophage protein that destabilizes the DNA helix. The fragment GP32*I (77% of the total weight), which destabilizes helices better than does the parent molecule, crystallizes as platelets thin enough for electron diffraction and electron imaging. In this paper we discuss the structure of this protein as revealed in images reconstructed from stained and unstained crystals.Crystals were prepared as previously described. Crystals for electron microscopy were pelleted from the buffer suspension, washed in distilled water, and resuspended in 1% glucose. Two lambda droplets were placed on grids over freshly evaporated carbon, allowed to sit for five minutes, and then were drained. Stained crystals were prepared the same way, except that prior to draining the droplet, two lambda of aqueous 1% uranyl acetate solution were applied for 20 seconds. Micrographs were produced using less than 2 e/Å2 for unstained crystals or less than 8 e/Å2 for stained crystals.

Soluble Fibrin Complexes and Fibrinogen Heterogeneity in Diabetes mellitus

1980 ◽  
Vol 44 (03) ◽  
pp. 130-134 ◽  
Author(s):  
E B Tsianos ◽  
N E Stathakis
Keyword(s):  
Diabetes Mellitus ◽  
Molecular Weight ◽  
Plasma Proteins ◽  
Polyacrylamide Gel Electrophoresis ◽  
Gel Filtration ◽  
Lower Molecular Weight ◽  
Polyacrylamide Gels ◽  
Soluble Fibrin ◽  
Α2 Macroglobulin ◽  
Patients With Diabetes

SummaryThe presence of soluble fibrin complexes (SFC) measured by gel filtration of plasma on 4% agarose columns, fibrinogen heterogeneity on 3.5% SDS-polyacrylamide gels and the concentrations of several plasma proteins were evaluated in 39 patients with diabetes mellitus (DM) and 19 matched control subjects. A small but significant increase of SFC was found in DM (p<0.01). On individual basis 51.2% of the patients had increased SFC (>M + 2 SD of the controls). Polyacrylamide gel electrophoresis of the SFC showed no evidence of cross-linking or proteolysis. Plasma clots formed in the presence of EDTA and trasylol were analysed in SDS-polyacrylamide gels in a normal and two lower molecular weight fibrin bands (band I, II, III). The percentage of band I fibrinogen was in diabetics (65.3 ± 4.7%) lower than that of the controls (71.8 ± 4.5%) (p < 0.01). Fibrinogen levels, antithrombin III, α1-antitrypsin, α2-macroglobulin and plasminogen were significantly increased in DM. We suggest that in DM there is an enhancement of intravascular fibrin formation and accelerated fibrinogen degradation to lower molecular weight forms.

Permeability Enhancing and Chemotactic Activities of Lower Molecular Weight Degradation Products of Human Fibrinogen

1981 ◽  
Vol 45 (01) ◽  
pp. 090-094 ◽  
Author(s):  
Katsuo Sueishi ◽  
Shigeru Nanno ◽  
Kenzo Tanaka
Keyword(s):  
Molecular Weight ◽  
Degradation Products ◽  
Electron Microscopic Observation ◽  
Chemotactic Activity ◽  
Lower Molecular Weight ◽  
Electron Microscopic ◽  
Human Fibrinogen ◽  
Rabbit Skin ◽  
Molecular Weights ◽  
Active Fragments

SummaryFibrinogen degradation products were investigated for leukocyte chemotactic activity and for enhancement of vascular permeability. Both activities increased progressively with plasmin digestion of fibrinogen. Active fragments were partially purified from 24 hr-plasmin digests. Molecular weights of the permeability increasing and chemotactic activity fractions were 25,000-15,000 and 25,000 respectively. Both fractions had much higher activities than the fragment X, Y, D or E. Electron microscopic observation of the small blood vessels in rabbit skin correlated increased permeability with the formation of characteristic gaps between adjoining endothelial cells and their contraction.These findings suggest that lower molecular weight degradation products of fibrinogen may be influential in contributing to granulocytic infiltration and enhanced permeability in lesions characterized by deposits of fibrin and/or fibrinogen.

Granulocyte-macrophage colony-stimulating factor preferentially activates the 94-kD STAT5A and an 80-kD STAT5A isoform in human peripheral blood monocytes

Blood ◽  
1996 ◽  
Vol 88 (4) ◽  
pp. 1206-1214 ◽  
Author(s):  
RL Rosen ◽  
KD Winestock ◽  
G Chen ◽  
X Liu ◽  
L Hennighausen ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Human Peripheral Blood ◽  
Janus Kinase ◽  
Lower Molecular Weight ◽  
Colony Stimulating Factor ◽  
Enhancer Element ◽  
Gm Csf ◽  
Macrophage Colony Stimulating Factor ◽  
Macrophage Colony ◽  
Stimulating Factor

Granulocyte-macrophage colony-stimulating factor (GM-CSF) induces immediate effects in monocytes by activation of the Janus kinase (JAK2) and STAT transcription factor (STAT5) pathway. Recent studies have identified homologues of STAT5, STAT5A, and STAT5B, as well as lower molecular weight variants of STAT5. To define the activation of the STAT5 homologues and lower molecular weight variant in human monocytes and monocytes differentiated into macrophages by culture in macrophage- CSF (M-CSF), we measured the GM-CSF induced tyrosine phosphorylation of STAT5A, STAT5B, and any lower molecular weight STAT5 isoforms. Freshly isolated monocytes expressed 94-kD STAT5A, 92-kD STAT5B, and an 80-kD STAT5A molecule. Whereas 94-kD STAT5A was clearly tyrosine phosphorylated and bound to the enhancer element, the gamma response region (GRR), of the Fc gamma RI gene, substantially less tyrosine phosphorylated STAT5B bound to the immobilized GRR element. Macrophages lost their ability to express the 80-kD STAT5A protein, but retained their ability to activate STAT5A. STAT5A-STAT5A homodimers and STAT5A- STAT5B heterodimers formed in response to GM-CSF. Therefore, activation of STAT5A predominates compared to STAT5B when assayed by direct immunoprecipitation and by evaluation of bound STATs to immobilized GRR. Selective activation of STAT5 homologues in addition to generation of lower molecular isoforms may provide specificity and control to genes expressed in response to cytokines such as GM-CSF.

Experimental Research on Mechanical Behavior of GFRP Bars under High Temperature

2011 ◽  
Vol 71-78 ◽  
pp. 3591-3594 ◽  
Author(s):  
Xiao Lu Wang ◽  
Xiao Xiong Zha
Keyword(s):  
Glass Transition ◽  
High Temperature ◽  
Transition Temperature ◽  
Glass Transition Temperature ◽  
Epoxy Resin ◽  
High Temperatures ◽  
Glass Fibers ◽  
Ultimate Tensile Stress ◽  
Gfrp Bars ◽  
Tensile Test Result

Experimental results on tensile mechanics properties of GFRP bars at high temperatures are present in this paper. Thirty commercially produced GFRP tensile specimens of 8mm diameter were tested at high temperature ranging from 10°Cup to 500°C. Tensile test result indicates that, the ultimate tensile stress has significant reduction at two temperature zones, one is glass transition temperature of epoxy resin (80-120°C), with strength degradation 22%, the second is the soften temperature of glass fibers(about 400°C), the strength decrease drastically with almost linear rate and remained 33% residual strength at 500°C. The elastic modulus remained unchanged until glass transition temperature of epoxy resin, and the modulus declined linearly with the temperature elevating. Stress-strain relationships of GFRP bars exhibit liner performance even at high temperatures.

Sensitization from epoxy resin powder of high molecular weight

1980 ◽  
Vol 6 (2) ◽  
pp. 144-144 ◽  
Author(s):  
F. Bokelund ◽  
S. Fregert ◽  
L. Trulsson
Keyword(s):  
Molecular Weight ◽  
Epoxy Resin ◽  
High Molecular Weight

Bagasse Wet-Stored with the Hypochlorite Bleaching Waste Water

2013 ◽  
Vol 295-298 ◽  
pp. 198-201 ◽  
Author(s):  
Bing Sun ◽  
Li Bao ◽  
Yu Xin Liu
Keyword(s):  
Waste Water ◽  
Molecular Weight ◽  
Storage Time ◽  
Storage System ◽  
Reducing Sugar ◽  
Total Sugar ◽  
Small Molecular Weight ◽  
Wet Storage ◽  
Change Trend ◽  
Better Than

In this paper, the bagasse was wet stored by hypochlorite bleaching waste water with or without chlorine. The dissolution ability of lignin, total sugar and reducing sugar was investigated. Then the effluent properties with the wet storage time prolonging were tested. The results showed that some small molecular weight substances were dissolved from baggase, such as sugar and lignin. And the dissolution ability of hypochlorite bleaching waste water with chlorine was better than that of hypochlorite bleaching waste water without chlorine. And the change trend of effluent properties for the two wet storage system were similar. With the wet storage time extending, the dissolved substances were degraded, COD and chroma of effluent were decreased, and the properties of effluent were improved.

scholarly journals The effect of the surface modification of carbon nanotubes on their dispersion in the epoxy matrix

2011 ◽  
Vol 13 (2) ◽  
pp. 62-69 ◽  
Author(s):  
Maria Wladyka-Przybylak ◽  
Dorota Wesolek ◽  
Weronika Gieparda ◽  
Anna Boczkowska ◽  
Ewelina Ciecierska
Keyword(s):  
Carbon Nanotubes ◽  
Surface Modification ◽  
Epoxy Resin ◽  
Epoxy Matrix ◽  
Mechanical Mixing ◽  
Weight Percentage ◽  
Homogeneous Dispersion ◽  
Multi Walled Carbon Nanotubes ◽  
Mixing Method ◽  
Walled Carbon Nanotubes

The effect of the surface modification of carbon nanotubes on their dispersion in the epoxy matrix Functionalization of multi-walled carbon nanotubes (MWCNTs) has an effect on the dispersion of MWCNT in the epoxy matrix. Samples based on two kinds of epoxy resin and different weight percentage of MWCNTs (functionalized and non-functionalized) were prepared. Epoxy/carbon nanotubes composites were prepared by different mixing methods (ultrasounds and a combination of ultrasounds and mechanical mixing). CNTs modified with different functional groups were investigated. Surfactants were used to lower the surface tension of the liquid, which enabled easier spreading and reducing the interfacial tension. Solvents were also used to reduce the liquid viscosity. Some of them facilitate homogeneous dispersion of nanotubes in the resin. The properties of epoxy/nanotubes composites strongly depend on a uniform distribution of carbon nanotubes in the epoxy matrix. The type of epoxy resin, solvent, surfactant and mixing method for homogeneous dispersion of CNTs in the epoxy matrix was evaluated. The effect of CNTs functionalization type on their dispersion in the epoxy resins was evaluated on the basis of viscosity and microstructure studies.

Sign in / Sign up

Export Citation Format

Share Document