Wear and microstructural properties of coatings on Weldox 700 steel

2020 ◽  
Vol 62 (6) ◽  
pp. 645-651 ◽  
Author(s):  
Cihan Özorak ◽  
Faik Okay ◽  
Ebru Özorak ◽  
Serkan Islak
Keyword(s):  
Microstructural Properties ◽  
Properties Of Coatings

Spectral and Topographic Microstructure of Brain Alpha Activity During Drowsiness at Sleep Onset and REM Sleep

2000 ◽  
Vol 14 (3) ◽  
pp. 151-158 ◽  
Author(s):  
José Luis Cantero ◽  
Mercedes Atienza
Keyword(s):  
Rem Sleep ◽  
Spectral Component ◽  
Sleep Onset ◽  
Quantitative Information ◽  
Maximum Energy ◽  
Alpha Activity ◽  
The Other ◽  
Classification Algorithms ◽  
Microstructural Properties ◽  
Brain States

Abstract High-resolution frequency methods were used to describe the spectral and topographic microstructure of human spontaneous alpha activity in the drowsiness (DR) period at sleep onset and during REM sleep. Electroencephalographic (EEG), electrooculographic (EOG), and electromyographic (EMG) measurements were obtained during sleep in 10 healthy volunteer subjects. Spectral microstructure of alpha activity during DR showed a significant maximum power with respect to REM-alpha bursts for the components in the 9.7-10.9 Hz range, whereas REM-alpha bursts reached their maximum statistical differentiation from the sleep onset alpha activity at the components between 7.8 and 8.6 Hz. Furthermore, the maximum energy over occipital regions appeared in a different spectral component in each brain activation state, namely, 10.1 Hz in drowsiness and 8.6 Hz in REM sleep. These results provide quantitative information for differentiating the drowsiness alpha activity and REM-alpha by studying their microstructural properties. On the other hand, these data suggest that the spectral microstructure of alpha activity during sleep onset and REM sleep could be a useful index to implement in automatic classification algorithms in order to improve the differentiation between the two brain states.

Evaluating Micro-Structure, Hydration and Thermal Expansions of Cement Containing Nano-Silica

GIS Business ◽  
2020 ◽  
Vol 15 (1) ◽  
pp. 158-165 ◽  
Author(s):  
Dr. Sarvesh PS Rajput
Keyword(s):  
Portland Cement ◽  
Mechanical Characteristics ◽  
Microstructural Properties ◽  
Nano Silica ◽  
Micro Structure ◽  
Microstructural Characteristics ◽  
Mechanical And Microstructural Properties

This study reported that the addition of nano-silica enhances the mechanical characteristics of concrete as its compressive, flexural and tensile split strengths are increased. As a comparison mixture to equate it along with nano-modified concrete, ordinary samples of Portland cement (OPC) have been utilized. Herein, upto 6.0 percent of OPC has been substituted by nanosilica. In fact, the introduction of nanosilica improves mechanical and microstructural characteristics of concrete by significantly (28 to 35%). The finding therefore, indicated that partly replacing OPC with up to 5 percent nanosilica increases the mechanical and microstructural properties cured up to ninety days as opposed to the standard OPC mix.

Evaluation of the accuracy indicators in determination of the coating thickness by crater grinding method

2020 ◽  
Vol 86 (7) ◽  
pp. 39-44
Author(s):  
K. V. Gogolinsky ◽  
A. E. Ivkin ◽  
V. V. Alekhnovich ◽  
A. Yu. Vasiliev ◽  
A. E. Tyurnina ◽  
...  
Keyword(s):  
Coating Thickness ◽  
Functional Dependence ◽  
Measurement Procedure ◽  
Metrological Certification ◽  
Measuring Instruments ◽  
Properties Of Coatings ◽  
Special Equipment ◽  
Grinding Method ◽  
Accuracy Of Measurements ◽  
Wide Range

Thickness is one of the key indicators characterizing the quality and functional properties of coatings. Various indirect methods (electromagnetic, radiation, optical) most often used in practice to measure thickness are based on the functional dependence of a particular physical parameter of the system «base – coating» on the coating thickness. The sensitivity of these procedures to the certain properties of coatings imposes the main restriction to the accuracy of measurements. Therefore, the development and implementation of the approaches based on direct measurements of geometric parameters of the coating appears expedient. These methods often belong to the class of «destructive» and, in addition to measuring instruments, require the use of special equipment. To ensure the uniformity of measurements in the laboratory or technological control, these methods are isolated as a separate procedure (method) and must undergo metrological certification in accordance with GOST R 8.563–2009. We present implementation, metrological certification and practical application of the method for measuring thickness of coatings by crater-grinding method. The principles of technical implementation of test equipment, measurement procedure and calculation formulas are described. The results of evaluating the accuracy indicators of the proposed procedure by calculation and experimental methods are presented. In both cases, the relative error did not exceed 6%. The applicability of the developed technique is shown for a wide range of coating materials (from soft metals to superhard ceramics) of different thickness (with from units to hundreds of micrometers). Apart from the goals of process control and outgoing inspection, the method can be recommended as a reference measurement procedure for calibration of measures and adjusting samples for various types of thickness gauges.

RESTORATION OF MACHINE PARTS WITH GALVANIZED ZINC COATINGS

2020 ◽  
Vol 4 (141) ◽  
pp. 140-147
Author(s):  
MIKHAIL VIKHAREV ◽  
◽  
VLADIMIR YUDIN ◽  
VESELOVSKIY NIKOLAY ◽  
◽  
...  
Keyword(s):  
Current Density ◽  
Cathode Surface ◽  
Zinc Coating ◽  
Cathode Current Density ◽  
Research Purpose ◽  
Cathode Layer ◽  
Properties Of Coatings ◽  
Chemical Polarization ◽  
Cathode Current ◽  
Zinc Coatings

The article shows the role of electroplating in the restoration of parts, indicates the advantages of restoring parts with electroplating over other methods, and gives the characteristics and properties of coatings obtained by electroplating. (Research purpose) The research purpose is in increasing the speed of application of zinc electroplating when restoring parts. (Materials and methods) The cathode current density has a decisive influence on the coating speed. The main reason for limiting the cathode current density during galvanizing from sulfuric acid electrolytes is the chemical polarization of the cathode. The article presents a study on the designed installation for the application of galvanic coatings. When applying coatings to the internal surfaces of parts, there was used a device with activating elements having an electromechanical rotation drive. This device prevents depletion of the near-cathode layer of the electrolyte and reduces the chemical polarization of the cathode. Elements made of moisture-resistant skin were used as activators. (Results and discussion) The article presents the results of experiments as a dependence of the coating speed on the speed of the activator relative to the restoring surface. It also presents the relationship between the size of the abrasive grains of the activating elements, the force of their pressing against the cathode surface, the speed of movement of the activator and the speed of applying the zinc coating, as well as its quality. By activating the cathode surface, it was possible to raise the operating current density to 100-150 amperes per square decimeter. The speed of application of zinc coatings is 16-25 micrometers per minute. (Conclusions) In the course of research, authors determined the conditions of electrolysis during galvanizing, which provide a significant increase in the cathode current density and the rate of application of these coatings during the restoration of parts.

Investigating formation, structure and properties of coatings based on Cu–Ti alloys

2019 ◽  
pp. 175-181
Author(s):  
A. I. Kovtunov ◽  
T. V. Semistenova ◽  
A. M. Ostryanko
Keyword(s):  
Wear Resistance ◽  
Heat Resistance ◽  
Chemical Compound ◽  
Wear Resistant Coating ◽  
Titanium Coating ◽  
Structure And Properties ◽  
Properties Of Coatings ◽  
Wear Resistant ◽  
Ti Alloys ◽  
Titanium Wire

The paper offers technology of argon-arc surfacing with titanium wire in order to form heat and wear resistant coating based on the titanium cuprides. The influence of surfacing modes on the chemical compound and structure of formed coatings is determined. The wear resistance and heat resistance at 600°C and 800°C were researched for copper–titanium coating with 8–63% titanium.

scholarly journals Time-Dependent Strength Behavior, Expansion, Microstructural Properties, and Environmental Impact of Basic Oxygen Furnace Slag-Treated Marine-Dredged Clay in South Korea

2021 ◽  
Vol 13 (9) ◽  
pp. 5026
Author(s):  
Gyeong-o Kang ◽  
Jung-goo Kang ◽  
Jin-young Kim ◽  
Young-sang Kim
Keyword(s):  
Particle Size ◽  
Environmental Impact ◽  
South Korea ◽  
Mechanical Characteristics ◽  
Basic Oxygen Furnace ◽  
Microstructural Properties ◽  
Compression Tests ◽  
Basic Oxygen ◽  
Strength Behavior ◽  
Bof Slag

The aim of this study was to investigate the mechanical characteristics, microstructural properties, and environmental impact of basic oxygen furnace (BOF) slag-treated clay in South Korea. Mechanical characteristics were determined via the expansion, vane shear, and unconfined compression tests according to various curing times. Scanning electron microscopy was conducted to analyze microstructural properties. Furthermore, environmental impacts were evaluated by the leaching test and pH measurements. According to the results, at the early curing stage (within 15 h), the free lime (F-CaO) content of the BOF slag is a significant factor for developing the strength of the adopted sample. However, the particle size of the BOF slag influences the increase in the strength at subsequent curing times. It was inferred that the strength behavior of the sample exhibits three phases depending on various incremental strength ratios. The expansion magnitude of the adopted samples is influenced by the F-CaO content and also the particle size of the BOF slag. Regarding the microstructural properties, the presence of reticulation structures in the amorphous gels with intergrowths of rod-like ettringite formation was verified inside the sample. Finally, the pH values and heavy metal leachates of the samples were determined within the compatible ranges of the threshold effect levels in the marine sediments of the marine environment standard of the Republic of Korea.

Sign in / Sign up

Export Citation Format

Share Document