ATE Failure Isolation Methodologies for Failure Analysis, Design Debug and Yield Enhancement

1998 ◽  
Author(s):  
D.S. Patrick ◽  
L.C. Wagner ◽  
P.T. Nguyen
Keyword(s):  
Integrated Circuits ◽  
Failure Analysis ◽  
Yield Enhancement ◽  
Production Test ◽  
Final Test ◽  
Critical Design ◽  
The Past ◽  
Product Engineering ◽  
Time Savings ◽  
Analysis Design

Abstract Failure isolation and debug of CMOS integrated circuits over the past several years has become increasingly difficult to perform on standard failure analysis functional testers. Due to the increase in pin counts, clock speeds, increased complexity and the large number of power supply pins on current ICS, smaller and less equipped testers are often unable to test these newer devices. To reduce the time of analysis and improve the failure isolation capabilities for failing ICS, failure isolation is now performed using the same production testers used in product development, multiprobe and final test. With these production testers, the test hardware, program and pattern sets are already available and ready for use. By using a special interface that docks the production test head to failure isolation equipment such as the emission microscope, liquid crystal station and E-Beam prober, the analyst can quickly and easily isolate the faillure on an IC. This also enables engineers in design, product engineering and the waferfab yield enhancement groups to utilize this equipment to quickly solve critical design and yield issues. Significant cycle time savings have been achieved with the migration to this method of electrical stimulation for failure isolation.

Direct Imaging of Device Characteristics In a Focused ion Beam System

1998 ◽  
Vol 4 (S2) ◽  
pp. 652-653 ◽  
Author(s):  
A. N. Campbell ◽  
J. M. Soden
Keyword(s):  
Integrated Circuits ◽  
Failure Analysis ◽  
Cross Sections ◽  
Material Removal ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Yield Enhancement ◽  
The Past ◽  
Design Changes ◽  
Design Debugging

A great deal can be learned about integrated circuits (ICs) and microelectronic structures simply by imaging them in a focused ion beam (FIB) system. FIB systems have evolved during the past decade from something of a curiosity to absolutely essential tools for microelectronics design verification and failure analysis. FIB system capabilities include localized material removal, localized deposition of conductors and insulators, and imaging. A major commercial driver for FIB systems is their usefulness in the design debugging cycle by (1) rewiring ICs quickly to test design changes and (2) making connection to deep conductors to facilitate electrical probing of complex ICs. FIB milling is also used for making precision cross sections and for TEM sample preparation of microelectronic structures for failure analysis and yield enhancement applications.

scholarly journals Backside Etching of GaAs Devices

1997 ◽  
Vol 5 (2) ◽  
pp. 18-19
Author(s):  
Jeffrey A. Mittereder
Keyword(s):  
Integrated Circuits ◽  
Failure Analysis ◽  
Integrated Circuit ◽  
Substrate Thickness ◽  
Microwave Integrated Circuits ◽  
Monolithic Microwave Integrated Circuits ◽  
The Past ◽  
Gaas Devices ◽  
Discrete Device

The following is a technique for analyzing the area underneath a GaAs integrated circuit or discrete device which may aid in failure analysis. This procedure has been used in the past by the microelectronics community, and it is reviewed here for GaAs monolithic microwave integrated circuits (MMICs) and discrete devices. Because it is a destructive method, we use it in our lab after all other testing is completed. The substrate thickness of the GaAs is ∼4 mils (25 μm).

The Logic Mapper

1998 ◽  
Author(s):  
Shawn Smith
Keyword(s):  
Failure Analysis ◽  
Functional Test ◽  
Yield Enhancement ◽  
Wafer Fab ◽  
Starting Point ◽  
Product Engineering ◽  
Device Integration ◽  
Large Populations ◽  
Test Correlation

Abstract The Logic Mapper software created by Knights Technology bridges the gap between traditional yield enhancement techniques in the wafer fab and analytical failure techniques in the failure analysis (FA) laboratory. With Logic Mapper, fabs can test logic devices as easily as memory devices. Traditional logic chip yield enhancement techniques within product engineering and wafer fab yield enhancement organizations rely heavily on binsort functional test correlation to anticipate and correct semiconductor process issues. Some of the key shortcomings of these techniques are: · The inability to relate a particular bin’s fallout to a suspect process level. · The inability to distinguish a defect-driven yield issue from a device-integration issue. · The inability to establish a clear link between large populations of failed die. Logic Mapper resolves these key shortcomings by taking the output from functional testers and translating it from a list of failed scan chains into a list of suspected netlist nodes. Using Merlin’s FrameworkTM software, the netlist can be used to identify the X, Y coordinates of a suspected failing node; the failure analysis and yield enhancement engineers have created a starting point for investigating failures. These nodes can then be crossmapped from the circuit design onto the chip’s layout over multiple photomask layers within the design. The ability to translate a logic device’s binsort functional test fail data to defect traces is an advancement in the quality of test information provided for failure analysis and yield enhancement.

Failure Analysis With the Scanning Electron Microscope

1972 ◽  
Vol 30 ◽  
pp. 482-483
Author(s):  
John R. Devaney
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Integrated Circuits ◽  
Failure Analysis ◽  
High Reliability ◽  
Military Applications ◽  
Small Structure ◽  
Useful Life ◽  
Insight Into ◽  
Scanning Electron

Occasionally in history, an event may occur which has a profound influence on a technology. Such an event occurred when the scanning electron microscope became commercially available to industry in the mid 60's. Semiconductors were being increasingly used in high-reliability space and military applications both because of their small volume but, also, because of their inherent reliability. However, they did fail, both early in life and sometimes in middle or old age. Why they failed and how to prevent failure or prolong “useful life” was a worry which resulted in a blossoming of sophisticated failure analysis laboratories across the country. By 1966, the ability to build small structure integrated circuits was forging well ahead of techniques available to dissect and analyze these same failures. The arrival of the scanning electron microscope gave these analysts a new insight into failure mechanisms.

Automated Detection of Pin Defects on Counterfeit Microelectronics

2018 ◽  
Author(s):  
Pallabi Ghosh ◽  
Domenic Forte ◽  
Damon L. Woodard ◽  
Rajat Subhra Chakraborty
Keyword(s):  
Integrated Circuits ◽  
Depth Map ◽  
Optical Microscope ◽  
Automated Detection ◽  
Detection Methods ◽  
Global Supply Chains ◽  
Subject Matter Experts ◽  
Security Breaches ◽  
The Past ◽  
Skilled Subject

Abstract Counterfeit electronics constitute a fast-growing threat to global supply chains as well as national security. With rapid globalization, the supply chain is growing more and more complex with components coming from a diverse set of suppliers. Counterfeiters are taking advantage of this complexity and replacing original parts with fake ones. Moreover, counterfeit integrated circuits (ICs) may contain circuit modifications that cause security breaches. Out of all types of counterfeit ICs, recycled and remarked ICs are the most common. Over the past few years, a plethora of counterfeit IC detection methods have been created; however, most of these methods are manual and require highly-skilled subject matter experts (SME). In this paper, an automated bent and corroded pin detection methodology using image processing is proposed to identify recycled ICs. Here, depth map of images acquired using an optical microscope are used to detect bent pins, and segmented side view pin images are used to detect corroded pins.

Fluorocarbon Precursor for High Aspect Ratio via Milling in Focused Ion Beam Modification of Integrated Circuits

2004 ◽  
Author(s):  
Valery Ray
Keyword(s):  
Side Effects ◽  
Aspect Ratio ◽  
Integrated Circuits ◽  
High Aspect Ratio ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Enabling Technology ◽  
Si Substrate ◽  
Ion Beam Modification ◽  
The Past

Abstract Gas Assisted Etching (GAE) is the enabling technology for High Aspect Ratio (HAR) circuit access via milling in Focused Ion Beam (FIB) circuit modification. Metal interconnect layers of microelectronic Integrated Circuits (ICs) are separated by Inter-Layer Dielectric (ILD) materials, therefore HAR vias are typically milled in dielectrics. Most of the etching precursor gases presently available for GAE of dielectrics on commercial FIB systems, such as XeF2, Cl2, etc., are also effective etch enhancers for either Si, or/and some of the metals used in ICs. Therefore use of these precursors for via milling in dielectrics may lead to unwanted side effects, especially in a backside circuit edit approach. Making contacts to the polysilicon lines with traditional GAE precursors could also be difficult, if not impossible. Some of these precursors have a tendency to produce isotropic vias, especially in Si. It has been proposed in the past to use fluorocarbon gases as precursors for the FIB milling of dielectrics. Preliminary experimental evaluation of Trifluoroacetic (Perfluoroacetic) Acid (TFA, CF3COOH) as a possible etching precursor for the HAR via milling in the application to FIB modification of ICs demonstrated that highly enhanced anisotropic milling of SiO2 in HAR vias is possible. A via with 9:1 aspect ratio was milled with accurate endpoint on Si and without apparent damage to the underlying Si substrate.

Failure Analysis of CDM-ESD Damage in a GaAs RFIC

2000 ◽  
Author(s):  
Amy Poe ◽  
Steve Brockett ◽  
Tony Rubalcava
Keyword(s):  
Radio Frequency ◽  
Failure Analysis ◽  
Integrated Circuit ◽  
Production Test ◽  
Analysis Techniques ◽  
Device Model ◽  
Charged Device ◽  
Subsequent Failure

Abstract The intent of this work is to demonstrate the importance of charged device model (CDM) ESD testing and characterization by presenting a case study of a situation in which CDM testing proved invaluable in establishing the reliability of a GaAs radio frequency integrated circuit (RFIC). The problem originated when a sample of passing devices was retested to the final production test. Nine of the 200 sampled devices failed the retest, thus placing the reliability of all of the devices in question. The subsequent failure analysis indicated that the devices failed due to a short on one of two capacitors, bringing into question the reliability of the dielectric. Previous ESD characterization of the part had shown that a certain resistor was likely to fail at thresholds well below the level at which any capacitors were damaged. This paper will discuss the failure analysis techniques which were used and the testing performed to verify the failures were actually due to ESD, and not caused by weak capacitors.

Detection and Characterization of an Electrical Failure Induced during Laser Ablation of Packages

2008 ◽  
Author(s):  
P. Schwindenhammer ◽  
H. Murray ◽  
P. Descamps ◽  
P. Poirier
Keyword(s):  
Laser Ablation ◽  
Integrated Circuits ◽  
Failure Analysis ◽  
Ablation Process ◽  
Thermally Induced ◽  
Electrical Failure ◽  
Electrical Phenomenon ◽  
Semiconductor Packages ◽  
Complex Semiconductor

Abstract Decapsulation of complex semiconductor packages for failure analysis is enhanced by laser ablation. If lasers are potentially dangerous for Integrated Circuits (IC) surface they also generate a thermal elevation of the package during the ablation process. During measurement of this temperature it was observed another and unexpected electrical phenomenon in the IC induced by laser. It is demonstrated that this new phenomenon is not thermally induced and occurs under certain ablation conditions.

Case Study in Fault Isolation of a Metal Short for Yield Enhancement

2010 ◽  
Author(s):  
Sarven Ipek ◽  
David Grosjean
Keyword(s):  
Failure Analysis ◽  
Failure Mechanism ◽  
Photon Emission ◽  
Fault Isolation ◽  
Yield Enhancement ◽  
Analysis Technique ◽  
Laser Signal ◽  
Signal Injection ◽  
Microscopy Techniques

Abstract The application of an individual failure analysis technique rarely provides the failure mechanism. More typically, the results of numerous techniques need to be combined and considered to locate and verify the correct failure mechanism. This paper describes a particular case in which different microscopy techniques (photon emission, laser signal injection, and current imaging) gave clues to the problem, which then needed to be combined with manual probing and a thorough understanding of the circuit to locate the defect. By combining probing of that circuit block with the mapping and emission results, the authors were able to understand the photon emission spots and the laser signal injection microscopy (LSIM) signatures to be effects of the defect. It also helped them narrow down the search for the defect so that LSIM on a small part of the circuit could lead to the actual defect.

Sign in / Sign up

Export Citation Format

Share Document