The Relationship between Nonlinearity of Asphalt Binders and Asphalt Mixture Permanent Deformation

2010 ◽  
Vol 11 (3) ◽  
pp. 917-946
Author(s):  
Samer W Katicha ◽  
Gerardo W. Flintsch ◽  
Amara Loulizi
Keyword(s):  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Asphalt Binders ◽  
The Relationship

Rheological Properties of High Grade Asphalt and its Mixture

2014 ◽  
Vol 599 ◽  
pp. 244-247 ◽  
Author(s):  
Qun Shan Ye ◽  
Chang Jian Ye ◽  
Zhi Lin Sun
Keyword(s):  
Rheological Properties ◽  
Dynamic Modulus ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Binders ◽  
Test Results ◽  
Complex Shear Modulus ◽  
Complex Shear ◽  
Dynamic Modulus Test

Viscosity test, dynamic shear test, dynamic modulus test and creep test were conducted to investigate the rheological properties of high modulus asphalt and its mixture. Test results indicated that the viscosity of hard grade asphalt could be increased when compared with the ordinary asphalt, especially at high temperatures. The complex shear modulus and dynamic modulus of hard-grade asphalt binder and its mixture were increased, which implied that the stiffness of them was enhanced. Furthermore, the elastically portions for viscoelastic property of asphalt binders were increased, which resulted in the reduction of phase angle for hard grade asphalt binders and mixtures. The rutting parameter for hard-grade asphalt mixture was increased remarkably, which revealed that the resistance to permanent deformation could be significantly improved for hard grade asphalt mixture.

scholarly journals Characterisation of Permanent Deformation Behaviour of Asphalt Mix Based on a Combined Elastic Plastic (CEP) Parameter

2021 ◽  
Vol 6 (12) ◽  
pp. 183
Author(s):  
Abhirup B. Roy-Chowdhury ◽  
Mofreh F. Saleh ◽  
Miguel Moyers-Gonzalez
Keyword(s):  
Dynamic Modulus ◽  
Deformation Behaviour ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Asphalt Binders ◽  
Rheological Parameters ◽  
Elastic Plastic ◽  
Major Mode ◽  
Dynamic Creep ◽  
Asphalt Mix

Permanent deformation or rutting is a major mode of failure in Hot Mix Asphalt (HMA) pavements. The binder used in the asphalt mixture plays an important role in the rutting resistance performance of the mixture. Currently, the Superpave rutting parameter and a more advanced test called multiple stress creep and recovery (MSCR) are the most widely used tests for rutting characterisation of asphalt binders. However, they both have their own merits and demerits. This study was undertaken to introduce a combined Elastic-Plastic (CEP) parameter as an additional binder rheological rutting parameters. The study also aimed at investigating the applicability and potential of this parameter to supplement the existing binder rheological parameters to characterise the properties of asphalt binder related to HMA rutting performance. Additionally, the correlations of the binder rheological parameters with the asphalt mix rutting parameters generated by the dynamic creep and the dynamic modulus tests were investigated. For the polymer-modified binders, Styrene-Butadiene-Styrene (SBS) was added to the PG 70-16 binder at two concentration levels (4, and 6% by the mass of the binder). A dense-graded HMA AC 14 was tested in the Dynamic Modulus (DM) and Dynamic Creep (DC) tests for evaluating the rutting performance. The CEP parameter was found to be much more reliable than the traditional G*/sin (δ) and the non-recoverable creep compliance (Jnr) parameters for evaluating the rutting behaviour of polymer modified asphalt binders, evident from better correlations of CEP with the asphalt mix performance. Unlike Jnr, the CEP parameter revealed a wider range of values, which is comparable with asphalt mixture test results.

scholarly journals Effectiveness of Micro- and Nanomaterials in Asphalt Mixtures through Dynamic Modulus and Rutting Tests

2016 ◽  
Vol 2016 ◽  
pp. 1-14 ◽  
Author(s):  
Hui Yao ◽  
Zhanping You
Keyword(s):  
Dynamic Modulus ◽  
Mechanical Performance ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Test Results ◽  
Modified Asphalt ◽  
Overall Performance ◽  
Carbon Microfiber

The objectives of this research are to use micro- and nanomaterials to modify the asphalt mixture and to evaluate the mechanical performance of asphalt mixtures. These micro- and nanomaterials, including carbon microfiber, Nanomer material, nanosilica, nonmodified nanoclay, and polymer modified nanoclay, were selected to blend with the control asphalt to improve the overall performance of the modified asphalt binders and mixtures. The microstructures of original materials and asphalt binders were observed by the field emission scanning electron microscope (FE-SEM). The mixture performance tests were employed to evaluate the resistance to rutting and permanent deformation of the modified asphalt mixtures. Test results indicate that(1)the dynamic modulus of micro- and nanomodified asphalt mixtures improved significantly;(2)the rutting susceptibility of the modified asphalt mixtures was reduced significantly compared to that of the control asphalt mixture;(3)the microstructures of modified asphalt binders were different from the control asphalt, and the structures determine the improvement in the performance of modified asphalt mixtures. These results indicate that the addition of micro- and nanomaterials enhanced the rutting performance and strength of asphalt mixtures. In addition, the analysis of variance (ANOVA) was used to analyze the modifying effects of micro- and nanomaterials on the performance.

Relating Adhesion and Cohesion of Asphalts to the Effect of Moisture on Laboratory Performance of Asphalt Mixtures

2005 ◽  
Vol 1901 (1) ◽  
pp. 33-43 ◽  
Author(s):  
Kunnawee Kanitpong ◽  
Hussain Bahia
Keyword(s):  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Fundamental Properties ◽  
Water Conditioning ◽  
Before And After ◽  
Indirect Tensile ◽  
Wheel Tracking

Antistripping additives and polymer modifications are two common modifiers used to improve the fundamental properties of asphalt binders as those properties relate to the performance of asphalt mixtures. Adhesion and cohesion are two important related properties of asphalt binders that can affect asphalt mixture performance before and after water conditioning. The purpose of this study was to quantify the effects of antistripping additives and polymers on the adhesion and cohesion of binders and to relate these effects to the performance of mixtures as measured in the laboratory before and after water conditioning. The performance tests of asphalt mixtures included indirect tensile strength, uniaxial compression permanent deformation, and Hamburg wheel tracking. Asphalt mixtures were produced with different modified binders and with two aggregate types. The binders were modified with antistripping additives and polymers and by chemical treatment and oxidization methods. Granite and limestone were selected as two types of aggregate sources. The results indicate that the performance of asphalt mixtures is highly dependent on modification techniques and water conditioning. The overall performance of polymer-modified mixtures is more desirable than those of unmodified mixtures and of mixtures modified with antistripping additives. Polymers are found to improve rutting performance, adhesion, and cohesion of an asphalt binder. In contrast, the antistripping additive can improve only the adhesion without changing other properties. The results of this study also illustrate that the adhesion and cohesion of an asphalt binder are good indicators of the performance of asphalt mixtures in the laboratory when they are conditioned with water.

scholarly journals Characterization of neat and modified asphalt binders and mixtures in relation to permanent deformation

2019 ◽  
Vol 26 (1) ◽  
pp. 379-387
Author(s):  
Iuri S. Bessa ◽  
Márcia M. Takahashi ◽  
Kamilla L. Vasconcelos ◽  
Liedi L. B. Bernucci
Keyword(s):  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Rutting Resistance ◽  
Modified Asphalt ◽  
Recoverable Compliance ◽  
Modified Binder ◽  
Deformation Tests

AbstractThe addition of polymers on asphalt binders aims to enhance their performance, especially at high temperatures, which correspond to rutting resistance. The Superpave rutting parameter (|G*|/sinδ) has been considered to be inadequate to characterize the performance of modified materials, therefore the Multiple Stress Creep and Recovery (MSCR) test was developed, providing the parameter non-recoverable compliance (Jnr). This research has the main objective of correlating asphalt binders performance-based characterization with rutting resistance of asphalt mixtures, and presents results obtained for one conventional (50/70 penetration grade) and two modified asphalt binders (2.1% RET and 1.9% RET) regarding their rheological characteristics. With the use of the dynamic shear rheometer (DSR), master curves and MSCR results were obtained for the three binders. In addition, permanent deformation tests were performed on the asphalt mixtures by means of laboratory traffic simulation. The rutting characterization indicated higher permanent deformation resistance for the modified binders for the asphalt binder and the asphalt mixture testing. The main conclusions were that the use of modified binder reduced in approximately 50% the Jnr values and the rut depth; also, the asphalt binders’ characteristics were able to predict the asphalt mixtures rutting resistance.

scholarly journals Evaluation of Susceptibility of Asphalt Binders to Rutting through MSCR Test

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Rong Chang ◽  
Aimin Sha ◽  
Pinxue Zhao ◽  
Songchang Huang ◽  
Cong Qi
Keyword(s):  
Permanent Deformation ◽  
Asphalt Binder ◽  
Stress Sensitivity ◽  
Deformation Resistance ◽  
Asphalt Binders ◽  
Sensitivity Index ◽  
Rutting Resistance ◽  
Modified Asphalt ◽  
Modified Asphalt Binder ◽  
The Relationship

Using modified asphalt binder is one of the most effective methods to solve the rutting problem of asphalt pavement, but the traditional G ∗ / sin     δ parameter is not enough to characterize the rutting resistance of modified asphalt in field use. In order to accurately evaluate the high temperature performance of asphalt and establish the relationship between the rutting resistance of binder and mixture, two kinds of matrix asphalt and three kinds of modified asphalt were selected for DSR and MSCR tests. G ∗ / sin     δ , nonrecoverable creep compliance Jnr, recovery rate R, and other parameters were used to characterize the permanent deformation resistance of the binder, and the correlation between these parameters and the results of rutting test was analyzed. The results show that Jnr3.2 can accurately characterize the permanent deformation resistance of asphalt, while the stress sensitivity index Jnrdiff is not applicable to all types of modified asphalt. In contrast, Jnrslope can better reflect the stress sensitivity of asphalt, and Jnrslope is significantly correlated with the results of rutting test.

scholarly journals A Review of Nanomaterials’ Effect on Mechanical Performance and Aging of Asphalt Mixtures

2019 ◽  
Vol 9 (18) ◽  
pp. 3657 ◽  
Author(s):  
João Crucho ◽  
Luís Picado-Santos ◽  
José Neves ◽  
Silvino Capitão
Keyword(s):  
High Performance ◽  
Mechanical Performance ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Economic Feasibility ◽  
Asphalt Binders ◽  
Aging Resistance ◽  
Marshall Stability

This review addresses the effects of the modifications with nanomaterials, particularly nanosilica, nanoclays, and nanoiron, on the mechanical performance and aging resistance of asphalt mixtures. The desire for high-performance and long-lasting asphalt pavements significantly pushed the modification of the conventional paving asphalt binders. To cope with such demand, the use of nanomaterials for the asphalt binder modification seems promising, as with a small amount of modification an important enhancement of the asphalt mixture mechanical performance can be attained. Several studies already evaluated the effects of the modifications with nanomaterials, mostly focusing on the asphalt binder properties and rheology, and the positive findings encouraged the study of modified asphalt mixtures. This review focuses on the effects attained in the mechanical properties of the asphalt mixtures, under fresh and aged conditions. Generally, the effects of each nanomaterial were evaluated with the current state-of-art tests for the characterization of mechanical performance of asphalt mixtures, such as, permanent deformation, stiffness modulus, fatigue resistance, indirect tensile strength, and Marshall stability. Aging indicators, as the aging sensitivity, were used to evaluate the effects in the asphalt mixture’s aging resistance. Finally, to present a better insight into the economic feasibility of the analyzed nanomaterials, a simple cost analysis is performed.

Sign in / Sign up

Export Citation Format

Share Document