scholarly journals Photocatalytic Degradation of Reactive Yellow Dye in Wastewater using H2O2/TiO2/UV Technique

2020 ◽  
Vol 21 (1) ◽  
pp. 15-21
Author(s):  
Noor A. Mohammed ◽  
Abeer I. Alwared ◽  
Mohammed S. Salman
Keyword(s):  
Degradation Rate ◽  
Rate Coefficient ◽  
Mercury Lamp ◽  
Oxidation Treatment ◽  
First Order ◽  
First Order Kinetics ◽  
Characteristic Wavelength ◽  
Color Degradation ◽  
Pseudo First Order ◽  
Ph Range

In the present study, advanced oxidation treatment, the TiO2 /UV/H2O2  process was applied to decolorisation of the reactive yellow dyes in aqueous solution. The UV radiation was carried out with a 6 W low-pressure mercury lamp. The rate of color removal was studied by measuring the absorbency at a characteristic wavelength. The effects of H2O2 dosage, dye initial concentration and pH on decolorisation kinetics in the batch photoreactor were investigated. The highest decolorisation rates were observed (98.8) at pH range between 3 and 7. The optimal levels of H2O2 needed for the process were examined. It appears that high levels of H2O2 could reduce decolorisation by scavenging the *OH. The color degradation rate decreases as the dye concentration increases. The rate coefficient (k=0.0319 min-1) of degradation, follows the pseudo-first-order kinetics.

Comparative study on photooxidation of methyl orange using various UV/oxidant systems

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Soraya Boukhedoua ◽  
Razika Zouaghi ◽  
Oualida Nour El Houda Kaabeche
Keyword(s):  
Methyl Orange ◽  
Comparative Study ◽  
Degradation Rate ◽  
Mercury Lamp ◽  
Radical Species ◽  
First Order ◽  
First Order Kinetics ◽  
Oxidant Concentration ◽  
Pseudo First Order ◽  
Uv C

Abstract In the present work, a comparative study of the photooxidation of an aqueous solution of Methyl Orange (MeO) has been realized using H2O2 and IO3 −, BrO3 −, ClO3 −, ClO4 −, BO3 − ions in the presence of UV low pressure mercury lamp (UV-C light at λ max = 254 nm). The initial concentration of MeO in all experiments was 6 × 10−5 mol L−1. The degradation rate of MeO follows pseudo-first-order kinetics in all UV/Oxidant systems. The highest degradation rate of MeO was in the BrO3 −/UV254nm system. Different systems were compared for an oxidant concentration of 10−2 mol L−1 and the obtained results showed that decolorization followed the decreasing order: BrO 3 − /UV 254 nm  > IO 3 − /UV 254 nm  > H 2 O 2 /UV 254 nm  > BO 3 − /UV 254 nm  > ClO 3 − /UV 254 nm  = ClO 4 − /UV 254 nm  = UV 254 nm . The optimization of oxidants concentration for each process was determined (10−2 mol L−1 for IO3 − which gives almost the same k app for 5 × 10−3, 10−2 mol L−1 for BO3 − and 5 × 10−2 mol L−1 for H2O2). No degradation of MeO in presence of ClO3 − and ClO4 − because these ions do not absorb at 254 nm, therefore they do not generate radical species which degrade organic pollutants. The mineralization was also studied where it was reached 97% after 5 h of irradiation for both H2O2/UV254 nm and BO3 −/UV254 nm systems.

scholarly journals Photodegradation of levofloxacin in aqueous and organic solvents: A kinetic study

2013 ◽  
Vol 63 (2) ◽  
pp. 223-229 ◽  
Author(s):  
Iqbal Ahmad ◽  
Raheela Bano ◽  
Muhammad Ali Sheraz ◽  
Sofia Ahmed ◽  
Tania Mirza ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Degradation Rate ◽  
Hplc Method ◽  
Ph Profile ◽  
Degree Of Ionization ◽  
First Order ◽  
First Order Kinetics ◽  
Anionic Species ◽  
Ph Range ◽  
Kinetics Of

The kinetics of photodegradation of levofloxacin in solution on UV irradiation in the pH range 2.0-12.0 has been studied using a HPLC method. Levofloxacin undergoes first-order kinetics in the initial stages of the reaction and the apparent first-order rate constants are of the order of 0.167 to 1.807×10-3 min-1. The rate-pH profile is represented by a curve indicating the presence of cationic, dipolar and anionic species during the reaction. The singly ionized form of the molecule is non-fluorescent and is less susceptible to photodegradation. The increase in the degradation rate in the pH range 5.0-9.0 may be due to greater reactivity of the ionized species existing in that range. The rate appears to vary with a change in the degree of ionization of the species present in a particular pH range and their susceptibility to photodegradation. Above pH 9, the decrease in the rate of photodegradation may be a result of deprotonation of the piperazinyl group. The levofloxacin molecule is more stable in the pH range around 7, which is then suitable for formulation purposes. The photodegradation of levofloxacin was found to be affected by the dielectric constant and viscosity of the medium

Degradation Kinetics of Reactive Brilliant Red X-3B Dye by UV/Mn2+/H2O2/Micro-Aeration

2012 ◽  
Vol 441 ◽  
pp. 549-554
Author(s):  
Ying Jie Cai ◽  
Xiao Jun Yang ◽  
Dong Sheng Xia ◽  
Qing Fu Zeng
Keyword(s):  
Degradation Rate ◽  
Ph Value ◽  
Degradation Kinetics ◽  
H2o2 Concentration ◽  
Kinetics Equation ◽  
Linear Least Squares ◽  
First Order ◽  
First Order Kinetics ◽  
Pseudo First Order ◽  
Kinetics Of

Abstract. Degradation of reactive brilliant red X-3B (X-3B) by a UV/Mn2+/H2O2/micro- aeration method was investigated. The influencing factors of degradation of X-3B including UV irradiation, aeration, pH value, H2O2 concentration and X-3B concentration were examined. The results show that X-3B was effectively degraded by the UV/Mn2+/H2O2/micro-aeration method. The degradation rate of X-3B was obtained from weighted linear least squares analysis of the experimental data, and accorded with the pseudo-first order kinetics equation.

Kinetics and mechanism of substitution reactions of (N,N-dimethylformamide)pentaammine–cobalt(III) and –rhodium(III) ions in DMF as solvent

1978 ◽  
Vol 56 (20) ◽  
pp. 2609-2615 ◽  
Author(s):  
S. T. Danny Lo ◽  
Margaret J. Sisley ◽  
Thomas W. Swaddle
Keyword(s):  
Exchange Rate ◽  
Rate Coefficient ◽  
Kinetics And Mechanism ◽  
Rate Data ◽  
Substitution Reactions ◽  
First Order ◽  
Order Rate ◽  
First Order Kinetics ◽  
Simple Substitution ◽  
Pseudo First Order

The exchange of N,N-dimethylformamide (DMF) between M(NH3)5DMF3+ and solvent in acidic DMF solutions proceeds with pseudo-first-order kinetics governed by the parameters kex(55 °C) = 8 × 10−5 and 1.1 × 10−4 s−1, ΔHex* = 113 and 99 kJ mol−1, ΔSex* = +22 and −20 J K−1 mol−1, and ΔVex* = +3.2 and −1.4 cm3 mol−1 for M = Co and Rh respectively. For M = Co (but not Rh), the exchange rate was much faster in the absence of acid, and reduction of Co(III) to Co(II) was significant at low acidities. Solubility problems precluded the measurement of meaningful rate data for the reactions of M(NH3)5DMF3+ with nucleophiles X− in acidic DMF solution except for the case M = Co with X = Br−, for which a limiting first-order rate coefficient 2.5 times kex was obtained for the formation of Co(NH3)5Br2+ at high [Br−] at 55 °C. Despite this last result, the mechanism of simple substitution reactions is evidently dissociative interchange (Id) for pentaamminecobalt(III) complexes in general, but associative interchange (Ia) for pentaamminerhodium(III) analogues.

Photodegradation of sulfonamide antimicrobial compounds (sulfadiazine, sulfamethizole, sulfamethoxazole and sulfathiazole) in various UV/oxidant systems

2015 ◽  
Vol 71 (3) ◽  
pp. 412-417 ◽  
Author(s):  
J. T. Wu ◽  
C. H. Wu ◽  
C. Y. Liu ◽  
W. J. Huang
Keyword(s):  
Degradation Rate ◽  
Removal Rate ◽  
Antimicrobial Compounds ◽  
Mineralization Rate ◽  
First Order ◽  
First Order Kinetics ◽  
Photodegradation Rate ◽  
Total Organic Carbon Removal ◽  
Pseudo First Order ◽  
H2o2 System

This study used Na2S2O8, NaBrO8 and H2O2 to degrade sulfadiazine (SDZ), sulfamethizole (SFZ), sulfamethoxazole (SMX) and sulfathiazole (STZ) under ultraviolet (UV) irradiation. The initial concentration of sulfonamide and oxidant in all experiments was 20 mg/L and 5 mM, respectively. The degradation rate for sulfonamides satisfies pseudo-first-order kinetics in all UV/oxidant systems. The highest degradation rate for SDZ, SFZ, SMX and STZ was in the UV/Na2S2O8, UV/NaBrO3, UV/Na2S2O8 and UV/H2O2 system, respectively. In the UV/Na2S2O8 system, the photodegradation rate of SDZ, SFZ, SMX and STZ was 0.0245 min−1, 0.0096 min−1, 0.0283 min−1 and 0.0141 min−1, respectively; moreover, for the total organic carbon removal rate for SDZ, SFZ, SMX and STZ it was 0.0057 min−1, 0.0081 min−1, 0.0130 min−1 and 0.0106 min−1, respectively. Experimental results indicate that the ability of oxidants to degrade sulfonamide varied with pollutant type. Moreover, UV/Na2S2O8 had the highest mineralization rate for all tested sulfonamides.

scholarly journals Degradation of α-terpineol in aqueous solution by UV/H2O2: kinetics, transformation products and pathways

2019 ◽  
Vol 79 (11) ◽  
pp. 2195-2202
Author(s):  
Jie Yao ◽  
Jinglin Guo ◽  
Zhaoguang Yang ◽  
Haipu Li ◽  
Bo Qiu
Keyword(s):  
Natural Organic Matter ◽  
Degradation Rate ◽  
Apparent Rate Constant ◽  
Transformation Products ◽  
Foaming Agent ◽  
First Order ◽  
Real Water Samples ◽  
First Order Kinetics ◽  
Effective Technology ◽  
Pseudo First Order

Abstract The monoterpene alcohol α-terpineol is extensively used as the foaming agent in mineral processing and can be released to environment along with the wastewater. This study evaluated the feasibility of eliminating α-terpineol in water by ultraviolet irradiation (UV) in combination with hydrogen peroxide (H2O2). Within an H2O2 dose of 10 mg/L and an UV fluence of 64.8 J/cm2, more than 95% of the α-terpineol can be removed. The reactions fitted well to pseudo-first-order kinetics, and the apparent rate constant was 0.0678 min−1. The effects of matrix species including various anions and humic acid (HA), were evaluated. The degradation rate decreased significantly with the addition of bicarbonate and HA. Further verification was carried out with three types of real water samples. In the ground water and the surface water, the degradation rate decreased likely due to the presence of natural organic matter. Finally, possible degradation pathways were proposed based on the identification of transformation products, and the occurrence of two main transformation products were monitored. This study demonstrated that the UV/H2O2 is an effective technology for the degradation of α-terpineol in water.

Photo-catalytic degradation of gaseous pollutants in paper mills of southern China

TAPPI Journal ◽  
2018 ◽  
Vol 17 (03) ◽  
pp. 167-178 ◽  
Author(s):  
Xin Tong ◽  
Jiao Li ◽  
Jun Ma ◽  
Xiaoquan Chen ◽  
Wenhao Shen
Keyword(s):  
Degradation Rate ◽  
Southern China ◽  
Catalytic Degradation ◽  
Pulp And Paper ◽  
Gaseous Pollutants ◽  
Pulp And Paper Mills ◽  
Paper Mills ◽  
Initial Concentration ◽  
First Order ◽  
First Order Kinetics

Studies were undertaken to evaluate gaseous pollutants in workplace air within pulp and paper mills and to consider the effectiveness of photo-catalytic treatment of this air. Ambient air at 30 sampling sites in five pulp and paper mills of southern China were sampled and analyzed. The results revealed that formaldehyde and various benzene-based molecules were the main gaseous pollutants at these five mills. A photo-catalytic reactor system with titanium dioxide (TiO2) was developed and evaluated for degradation of formaldehyde, benzene and their mixtures. The experimental results demonstrated that both formaldehyde and benzene in their pure forms could be completely photo-catalytic degraded, though the degradation of benzene was much more difficult than that for formaldehyde. Study of the photo-catalytic degradation kinetics revealed that the degradation rate of formaldehyde increased with initial concentration fitting a first-order kinetics reaction. In contrast, the degradation rate of benzene had no relationship with initial concentration and degradation did not conform to first-order kinetics. The photo-catalytic degradation of formaldehyde-benzene mixtures indicated that formaldehyde behaved differently than when treated in its pure form. The degradation time was two times longer and the kinetics did not reflect a first-order reaction. The degradation of benzene was similar in both pure form and when mixed with formaldehyde.

Kinetic of oxidation of methyl orange by vanadium(V) under conditions VO2+ and decavanadates coexist: Catalysis by Triton X-100 micellar medium

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Methyl Orange ◽  
Solution Ph ◽  
Vanadium Concentration ◽  
Limiting Behavior ◽  
First Order ◽  
First Order Kinetics ◽  
Ph Range ◽  
Kinetic Pattern ◽  
Triton X ◽  
Kinetics Of

The kinetics of oxidation of methyl orange by vanadium(V) {V(V)} has been investigated in the pH range 2.3-3.79. In this pH range V(V) exists both in the form of decavanadates and VO2+. The kinetic results are distinctly different from the results obtained for the same reaction in highly acidic solution (pH < 1) where V(V) exists only in the form of VO2+. The reaction obeys first order kinetics with respect to methyl orange but the rate has very little dependence on total vanadium concentration. The reaction is accelerated by H+ ion but the dependence of rate on [H+] is less than that corresponding to first order dependence. The equilibrium between decavanadates and VO2+ explains the different kinetic pattern observed in this pH range. The reaction is markedly accelerated by Triton X-100 micelles. The rate-[surfactant] profile shows a limiting behavior indicative of a unimolecular pathway in the micellar pseudophase.

In-vitro Kinetic Hydrolysis Study of Metronidazole Derivatives with Carvacrol and Eugenol Using Validated RP-HPLC Method

2020 ◽  
Vol 16 ◽  
Author(s):  
M. Alarjah
Keyword(s):  
Half Life ◽  
Hplc Method ◽  
Hydrolysis Rate ◽  
First Order ◽  
First Order Kinetics ◽  
Rp Hplc ◽  
Pharmacokinetic Properties ◽  
Pseudo First Order ◽  
Kinetic Hydrolysis

Background: Prodrugs principle is widely used to improve the pharmacological and pharmacokinetic properties of some active drugs. Much effort was made to develop metronidazole prodrugs to enhance antibacterial activity and or to improve pharmacokinetic properties of the molecule or to lower the adverse effects of metronidazole. Objective: In this work, the pharmacokinetic properties of some of monoterpenes and eugenol pro metronidazole molecules that were developed earlier were evaluated in-vitro. The kinetic hydrolysis rate constants and half-life time estimation of the new metronidazole derivatives were calculated using the validated RP-HPLC method. Method: Chromatographic analysis was done using Zorbbax Eclipse eXtra Dense Bonding (XDB)-C18 column of dimensions (250 mm, 4.6 mm, 5 μm), at ambient column temperature. The mobile phase was a mixture of sodium dihydrogen phosphate buffer of pH 4.5 and methanol in gradient elution, at 1ml/min flow rate. The method was fully validated according to the International Council for Harmonization (ICH) guidelines. The hydrolysis process carried out in an acidic buffer pH 1.2 and in an alkaline buffer pH 7.4 in a thermostatic bath at 37ºC. Results: The results followed pseudo-first-order kinetics. All metronidazole prodrugs were stable in the acidic pH, while they were hydrolysed in the alkaline buffer within a few hours (6-8 hr). The rate constant and half-life values were calculated, and their values were found to be 0.082- 0.117 hr-1 and 5.9- 8.5 hr., respectively. Conclusion: The developed method was accurate, sensitive, and selective for the prodrugs. For most of the prodrugs, the hydrolysis followed pseudo-first-order kinetics; the method might be utilised to conduct an in-vivo study for the metronidazole derivatives with monoterpenes and eugenol.

New insights on the UV/TiO2 photocatalytic treatment of thiomersal and its 2-sulfobenzoic acid product

2021 ◽  
Vol 02 ◽  
Author(s):  
Emmanuel M. de la Fournière ◽  
Jorge M. Meichtry ◽  
Graciela S. Custo ◽  
Eduardo A. Gautier ◽  
Marta I. Litter
Keyword(s):  
Degradation Products ◽  
Acidic Ph ◽  
Cosmetic Products ◽  
Acid Product ◽  
First Order ◽  
First Order Kinetics ◽  
Photocatalytic Destruction ◽  
Pseudo First Order ◽  
Mineralization Degree ◽  
Suitable Technique

Background: Thiomersal (TM), a complex between 2-mercaptobenzoic acid (2-MBA) and ethylmercury (C2H5Hg+), is an antimicrobial preservative used in immunological, ophthalmic, cosmetic products, and vaccines. Objective: TM has been treated by UV/TiO2 photocatalysis in the presence or absence of oxygen at acidic pH. C2H5Hg+, 2-MBA, and 2-sulfobenzoic acid (2-SBA) were found as products. A 2-SBA photocatalytic treatment was undertaken to study sulfur evolution. Methods: Photocatalytic runs were performed using a UVA lamp (λmax = 352 nm), open to the air or under N2. A suspension of the corresponding TM or 2-SBA salt and TiO2 was prepared, and pH was adjusted. Suspensions were stirred in the dark for 30 min and then irradiated. TM, 2-MBA, 2-SBA, and C2H5Hg+ were quantified by HPLC, sulfur by TXRF, and the deposits on the photocatalyst were analyzed by chemical reactions. The mineralization degree was followed by TOC. Sulfate was determined using BaCl2 at 580 nm. Results: Photocatalytic destruction of TM and total C2H5Hg+ was complete under N2 and air, but TM degradation was much faster in air. The evolution of TM and the products followed a pseudo-first-order kinetics. Conclusion: TiO2-photocatalytic degradation is a suitable technique for the treatment of TM and its degradation products. In contrast to other organomercurial compounds, TM degradation is faster in the presence of O2, indicating that the oxidative mechanism is the preferred pathway. A significant TM mineralization (> 60%, NPOC and total S) was obtained. TM was more easily degraded than 2-SBA. Sulfate was the final product.

Sign in / Sign up

Export Citation Format

Share Document