scholarly journals Field Tests with Regard to Pile Driving and Bearing Capacity of Piled Foundations

1967 ◽  
Vol 7 (3) ◽  
pp. 30-53 ◽  
Author(s):  
Yasunori Koizumi ◽  
Kojiro Ito
Keyword(s):  
Bearing Capacity ◽  
Field Tests ◽  
Pile Driving ◽  
Piled Foundations

scholarly journals ANALYSIS OF THE FIELD TESTS RESULTS OF BORED CONICAL PILES UNDER THE ACTION OF VARIOUS TYPES OF LOADS

2018 ◽  
Vol 3 (3) ◽  
pp. 24-29
Author(s):  
Ирина Рыбникова ◽  
Irina Rybnikova ◽  
Александр Рыбников ◽  
Aleksandr Rybnikov
Keyword(s):  
Bearing Capacity ◽  
Load Capacity ◽  
Normal Component ◽  
Cone Angle ◽  
Field Tests ◽  
Side Surface ◽  
Test Results ◽  
Head Diameter ◽  
Cylindrical Piles ◽  
Bored Piles

One of the methods of improving the bearing capacity of bored piles is giving them a taper. The feature of these (wedge-type) piles is that under load they work "as a thrust" and transfer part of the load due to the normal component to the inclined side surface. Three sizes of tapered bored piles were tested, with the length of 4.5 m, head diameter 0.4; 0.5; 0.6 m and with cone angle 1o and 2,5o. The test results were compared with the test results of cylindrical piles, 4.5 m long, with head diameter 0.4 m and 0.6 m. It has been discovered that with the increasing cone angle, the bearing capacity of piles against the pressing load, especially the specific load capacity for 1 m3 of material, as compared to cylindrical piles, increases significantly. It has been determined that the larger is the diameter of the head of the pile, the higher is the bearing capacity against the horizontal load, and the bearing capacity against the pullout load is equal to the breakout force of a pile from the soil.

scholarly journals A concrete prefabricated slab as a technology for reconstructing damaged, local air-field pavements

2018 ◽  
Vol 2018 (12) ◽  
pp. 51-64
Author(s):  
Mariusz Wesołowski ◽  
Bartosz Świerzewski
Keyword(s):  
Bearing Capacity ◽  
Field Tests ◽  
Working Life ◽  
Concrete Slabs ◽  
Load Bearing Capacity ◽  
Load Bearing ◽  
The Real ◽  
International Airport ◽  
Fast Reconstruction

The age of currently operated concrete airfield pavements in Poland exceeds 30 years opera-tion period many times. Such a long working life of airfield pavements forced to search for the efficient and fast technologies of their reconstruction. The article described in detail the technologies of fast reconstruction of airfield concrete slabs using prefabricated slabs. The addressed technology guarantees the reconstruction and even the improvement of the condi-tion of load-bearing capacity of mentioned airfield slabs which was confirmed during labora-tory tests, field tests and practically verified in the real operation in the International Airport Kraków-Balice.

scholarly journals Geotechnical Properties of Anthropogenic Soils in Road Engineering

2020 ◽  
Vol 12 (12) ◽  
pp. 4843
Author(s):  
Andrzej Głuchowski ◽  
Katarzyna Gabryś ◽  
Emil Soból ◽  
Raimondas Šadzevičius ◽  
Wojciech Sas
Keyword(s):  
Cyclic Loading ◽  
Bearing Capacity ◽  
Construction Material ◽  
Bottom Ash ◽  
Field Tests ◽  
Recycled Concrete ◽  
Concrete Aggregate ◽  
Test Results ◽  
Anthropogenic Soils ◽  
Road Engineering

The construction of a roads network consumes high amounts of materials. The road materials are required to fulfill high standards like bearing capacity and low settlement susceptibility due to cyclic loading. Therefore, crushed aggregates are the primary subbase construction material. The material-intensity of road engineering leads to depletion of natural resources, and to avoid it, the alternative recycled materials are required to be applied to achieve sustainable development. The anthropogenic soils (AS), which are defined as man-made unbound aggregates, are the response to these requirements. For the successful application of the AS, a series of geotechnical laboratory and field tests were conducted. In this article, we present the set of 58 test results, including California Bearing Ratio (CBR) bearing capacity tests, oedometric tests, and cyclic CBR tests, to characterize the behavior of three AS types and to compare its reaction with natural aggregate (NA). The AS tested in this study are recycled concrete aggregate (RCA), fly ash and bottom ash mix (BS), and blast furnace slag (BFS). The results of the tests show that the AS has similar characteristics to NA, and in some cases, like compression characteristic, RCA and BFS behave a stiffer response to cyclic loading. The test results and analysis presented here extend the knowledge about AS compressibility and AS response to cyclic loading.

scholarly journals Estimating the Uplift Bearing Capacity of Belled Piers Adjacent to Sloping Ground by Numerical Modeling Based on Field Tests

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Yangchun Han ◽  
Jiulong Cheng ◽  
Weifeng Zheng ◽  
Shijun Ding
Keyword(s):  
Numerical Modeling ◽  
Bearing Capacity ◽  
Attenuation Coefficient ◽  
Slope Angle ◽  
Field Tests ◽  
Embedment Depth ◽  
Sloping Ground ◽  
Foundation Model ◽  
The Difference ◽  
The Impact

In order to evaluate the uplift bearing capacity of belled piers beside slopes, a series of numerical simulations are carried out based on field tests data. First, a number of uplift loading tests of full-scale belled piers are carried out on the project site of transmission line in Anhui Province, China. Second, a slope-foundation model for numerical modeling is proposed and calibrated based on field tests data. The behavior of belled piers adjacent to slopes subject to uplift load is studied by numerical modeling. The impact of three parameters, including distance (a) from the belled pier to the crest of the slope, slope angle (β), and embedment depth (h) of the belled pier, has been investigated on the uplift capacity of the belled pier. Based on the simulation results, an attenuation coefficient (ω) is put forward for evaluating the reduction of uplift bearing capacity of the belled pier. The results show that the coefficient ω is negatively correlated with distance a and depth h, and the influence of distance a is greater than that of depth h according to the results of variance analysis, but the difference is not significant by F test. Moreover, the empirical equation between attenuation coefficient ω and three key factors a, β, and h had been presented by a series of fitting.

Experimental and large-scale field tests of grid-anchor system performance in increasing the ultimate bearing capacity of granular soils

2016 ◽  
Vol 53 (7) ◽  
pp. 1047-1058 ◽  
Author(s):  
M. Mosallanezhad ◽  
N. Hataf ◽  
S.H. Sadat Taghavi
Keyword(s):  
Bearing Capacity ◽  
Large Scale ◽  
Field Tests ◽  
Experimental Tests ◽  
Ultimate Bearing Capacity ◽  
Soil Reinforcement ◽  
Granular Soils ◽  
Anchor System ◽  
Scale Field ◽  
Large Scale Field

Soil reinforcement by means of geogrid is an effective method of increasing the ultimate bearing capacity (UBC) of granular soils. In this study a new system, created by adding cubic anchors to ordinary geogrids, is introduced to increase the UBC of granular soils. This system is called “grid-anchor” (G-A). To analyse the performance of the G-A system in increasing the UBC of granular soils, 45 experimental tests and 9 field tests were performed, the results of which show that the G-A system is 1.8 times more capable than ordinary geogrids in increasing the UBC in square foundations. Furthermore, the failure of soil reinforced by the ordinary geogrid takes place at a settlement of 9% of the foundation width, while the same value for the G-A system is almost 13%.

Subgrade reaction and load-settlement characteristics of gravelly cobble deposits by plate-load tests

1998 ◽  
Vol 35 (5) ◽  
pp. 801-810 ◽  
Author(s):  
Ping-Sien Lin ◽  
Li-Wen Yang ◽  
C Hsein Juang
Keyword(s):  
Bearing Capacity ◽  
Field Tests ◽  
Load Test ◽  
Subgrade Reaction ◽  
Plate Load Test ◽  
Modulus Of Subgrade Reaction ◽  
High Rise ◽  
Undisturbed Samples ◽  
Load Tests ◽  
Mat Foundations

This paper presents the result of plate-load tests conducted on a gravelly cobble deposit in Taichung Basin, Taiwan. The geologic formation of the gravelly cobble deposit makes it very difficult to obtain large undisturbed samples for laboratory testing. These field tests provide an opportunity to examine the applicability of existing theories on bearing capacity and subgrade reaction in this geologic formation. The modulus of subgrade reaction is of particular importance in the local practice of designing high-rise buildings on mat foundations. The results of the plate-load tests on this soil deposit are analyzed and discussed.Key words: plate-load test, gravelly cobble deposit, modulus of subgrade reaction, bearing capacity.

Sign in / Sign up

Export Citation Format

Share Document