scholarly journals Estimating the Uplift Bearing Capacity of Belled Piers Adjacent to Sloping Ground by Numerical Modeling Based on Field Tests

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Yangchun Han ◽  
Jiulong Cheng ◽  
Weifeng Zheng ◽  
Shijun Ding
Keyword(s):  
Numerical Modeling ◽  
Bearing Capacity ◽  
Attenuation Coefficient ◽  
Slope Angle ◽  
Field Tests ◽  
Embedment Depth ◽  
Sloping Ground ◽  
Foundation Model ◽  
The Difference ◽  
The Impact

In order to evaluate the uplift bearing capacity of belled piers beside slopes, a series of numerical simulations are carried out based on field tests data. First, a number of uplift loading tests of full-scale belled piers are carried out on the project site of transmission line in Anhui Province, China. Second, a slope-foundation model for numerical modeling is proposed and calibrated based on field tests data. The behavior of belled piers adjacent to slopes subject to uplift load is studied by numerical modeling. The impact of three parameters, including distance (a) from the belled pier to the crest of the slope, slope angle (β), and embedment depth (h) of the belled pier, has been investigated on the uplift capacity of the belled pier. Based on the simulation results, an attenuation coefficient (ω) is put forward for evaluating the reduction of uplift bearing capacity of the belled pier. The results show that the coefficient ω is negatively correlated with distance a and depth h, and the influence of distance a is greater than that of depth h according to the results of variance analysis, but the difference is not significant by F test. Moreover, the empirical equation between attenuation coefficient ω and three key factors a, β, and h had been presented by a series of fitting.

Case study: Prediction and field tests of railway noise and effects of a low-height noise barrier

2020 ◽  
Vol 68 (4) ◽  
pp. 303-314
Author(s):  
Yuna Park ◽  
Hyo-In Koh ◽  
University of Science and Technology, Transpo ◽  
University of Science and Technology, Transpo ◽  
University of Science and Technology, Transpo ◽  
...  
Keyword(s):  
High Speed ◽  
Field Tests ◽  
Residential Areas ◽  
Railway Systems ◽  
Railway Noise ◽  
Sound Levels ◽  
Noise Barrier ◽  
The Difference ◽  
Reduction Effect ◽  
The Impact

Railway noise is calculated to predict the impact of new or reconstructed railway tracks on nearby residential areas. The results are used to prepare adequate counter- measures, and the calculation results are directly related to the cost of the action plans. The calculated values were used to produce noise maps for each area of inter- est. The Schall 03 2012 is one of the most frequently used methods for the production of noise maps. The latest version was released in 2012 and uses various input para- meters associated with the latest rail vehicles and track systems in Germany. This version has not been sufficiently used in South Korea, and there is a lack of standard guidelines and a precise manual for Korean railway systems. Thus, it is not clear what input parameters will match specific local cases. This study investigates the modeling procedure for Korean railway systems and the differences between calcu- lated railway sound levels and measured values obtained using the Schall 03 2012 model. Depending on the location of sound receivers, the difference between the cal- culated and measured values was within approximately 4 dB for various train types. In the case of high-speed trains, the value was approximately 7 dB. A noise-reducing measure was also modeled. The noise reduction effect of a low-height noise barrier system was predicted and evaluated for operating railway sites within the frame- work of a national research project in Korea. The comparison of calculated and measured values showed differences within 2.5 dB.

Capacity of dynamically embedded plate anchors as assessed through field tests

2015 ◽  
Vol 52 (1) ◽  
pp. 87-95 ◽  
Author(s):  
A.P. Blake ◽  
C.D. O’Loughlin ◽  
C. Gaudin
Keyword(s):  
Bearing Capacity ◽  
Plate Thickness ◽  
Field Tests ◽  
Free Fall ◽  
Embedment Depth ◽  
Circular Plates ◽  
Centrifuge Tests ◽  
Plate Anchor ◽  
Central Shaft ◽  
Bearing Capacity Factor

A dynamically embedded plate anchor (DEPLA) is a rocket-shaped anchor that penetrates to a target depth in the seabed by the kinetic energy obtained through free-fall and by the anchor’s self-weight. After embedment, the central shaft is retrieved leaving the anchor flukes vertically embedded in the seabed. The flukes constitute the load bearing element as a plate anchor. This paper presents and considers field data on the embedment depth loss due to the plate anchor keying process and the subsequent bearing capacity factor of the plate anchor element. The loss in plate anchor embedment was significantly higher than that reported from corresponding centrifuge tests and is reflected in the larger padeye displacements required to mobilize peak capacity in the field tests. Measured plate capacities and plate rotations during keying indicate that the end of keying coincides with the peak anchor capacity. Experimental bearing capacity factors are in the range Nc = 14.3–14.6, which is appreciably higher than existing solutions for vanishingly thin circular plates. The higher Nc for the DEPLA is considered to be due to a combination of the cruciform fluke arrangement and the fluke (or plate) thickness.

scholarly journals Numerical analysis of reinforced embankment slopes made up of pozzolanic waste materials

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Vidya N. Patil ◽  
Hemant S. Chore ◽  
Vishwas A. Sawant
Keyword(s):  
Fly Ash ◽  
Bearing Capacity ◽  
Numerical Study ◽  
Slope Angle ◽  
Waste Materials ◽  
Embedment Depth ◽  
Embankment Slope ◽  
Edge Distance ◽  
Critical Slope ◽  
Grid Reinforcement

AbstractThe paper presents the numerical study of the bearing capacity behavior of the model footing placed on the top of reinforced embankment slopes made up of Pozzolanic waste materials such as fly ash and ground granulated blast furnace slag (GGBFS). The present investigation is aimed at studying the efficacy of the different types of reinforcement (geogrid and rubbergrid) in improving the load bearing capacity of the embankment slopes made up of waste materials. The effect of various parameters such as slope angle, location of the footing with slope crest, embedment depth of the reinforcement is studied on the strength behavior of the embankment. The analysis is carried out on unreinforced fly ash and GGBFS embankments for three slope angles and three locations of the footing with respect to slope crest, i.e., edge distance. The fly ash slopes reinforced with geogrid and rubber grid reinforcement is also analyzed for all the three slope angles and edge distances as that in unreinforced fly ash embankment slope and further, for various embedment depths of the layer of reinforcement. The GGBFS embankment reinforced with geogrid layer is analyzed with respect to critical slope angle and edge distance and optimum embedment depth of the reinforcement deduced from the unreinforced fly ash and GGBFS embankment and reinforced fly ash embankment. The analysis demonstrated that the load carrying capacity of the embankment slope decreases with increase in slope angle and edge distance in respect of unreinforced and reinforced fly ash slope and the optimum embedment depth ratio seems to be 1.2. Further, the rubbergrid reinforcement is found to perform better than the geogrid. The performance of geogrid reinforced GGBFS embankment is also noteworthy. The study underscores the effective utilization of Pozzolanic waste materials as the embankment slope and the rubbergrid derived out of discarded tyres.

Evaluation of the impact of public investment programs on social and economic performance of territories

2019 ◽  
pp. 109-123
Author(s):  
I. E. Limonov ◽  
M. V. Nesena
Keyword(s):  
Bayesian Modeling ◽  
Positive Impact ◽  
Public Investment ◽  
Difference In Differences ◽  
The Public ◽  
Export Activity ◽  
Regional Investment ◽  
The Difference ◽  
The Impact ◽  
Development Institution

The purpose of this study is to evaluate the impact of public investment programs on the socio-economic development of territories. As a case, the federal target programs for the development of regions and investment programs of the financial development institution — Vnesheconombank, designed to solve the problems of regional development are considered. The impact of the public interventions were evaluated by the “difference in differences” method using Bayesian modeling. The results of the evaluation suggest the positive impact of federal target programs on the total factor productivity of regions and on innovation; and that regional investment programs of Vnesheconombank are improving the export activity. All of the investments considered are likely to have contributed to the reduction of unemployment, but their implementation has been accompanied by an increase in social inequality.

The Use of Multimedia and its Impact on Bangladeshi EFL Learners at Tertiary Level

2020 ◽  
Vol 4 (2) ◽  
pp. 150
Author(s):  
Farzana Sharmin Pamela Islam
Keyword(s):  
Language Learning ◽  
Academic Writing ◽  
Teaching And Learning ◽  
English Language ◽  
Capital City ◽  
Tertiary Level ◽  
Language Classroom ◽  
The Difference ◽  
The Government ◽  
The Impact

As 21st century is the era of modern technologies with different aspects, it offers us to make the best use of them. After tape recorder and overhead projector (OHP), multimedia has become an important part of language classroom facilities for its unique and effective application in delivering and learning lesson. Although in many parts of Bangladesh, a South Asian developing country, where English enjoys the status of a foreign language, the use of multimedia in teaching and learning is viewed as a matter of luxury. However, nowadays the usefulness and the necessity of it are well recognized by the academics as well as the government. The study aims to focus on the difference between a traditional classroom void of multimedia and multimedia equipped classrooms at university level by explaining how multimedia support the students with enhanced opportunity to interact with diverse texts that give them more in-depth comprehension of the subject. It also focuses on audio-visual advantage of multimedia on the students’ English language learning. The study has followed a qualitative method to get an in-depth understanding of the impact of using multimedia in an English language classroom at tertiary level. For this purpose, the data have been collected from two different sources. Firstly, from students’ written response to  an open ended question as to their comparative experience of learning  lessons with and without multimedia facilities; and secondly, through  observation of English language classes at a private university of Dhaka, the capital city of Bangladesh. The discussion of the study is limited to  the use of multimedia in English language classroom using cartoons, images and music with a view to enhance students’ skills in academic writing, critical analysis of image and critical appreciation of music. For this purpose, cartoons in English language, images from Google and music from You Tube have got focused discussion in this paper.

scholarly journals X-ray Shielding, Mechanical, Physical, and Water Absorption Properties of Wood/PVC Composites Containing Bismuth Oxide

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2212
Author(s):  
Worawat Poltabtim ◽  
Ekachai Wimolmala ◽  
Teerasak Markpin ◽  
Narongrit Sombatsompop ◽  
Vichai Rosarpitak ◽  
...  
Keyword(s):  
Impact Strength ◽  
Water Absorption ◽  
Attenuation Coefficient ◽  
Bismuth Oxide ◽  
Morphological Properties ◽  
Linear Attenuation Coefficient ◽  
X Rays ◽  
Equivalent Thickness ◽  
X Ray ◽  
The Impact

The potential utilization of wood/polyvinyl chloride (WPVC) composites containing an X-ray protective filler, namely bismuth oxide (Bi2O3) particles, was investigated as novel, safe, and environmentally friendly X-ray shielding materials. The wood and Bi2O3 contents used in this work varied from 20 to 40 parts per hundred parts of PVC by weight (pph) and from 0 to 25, 50, 75, and 100 pph, respectively. The study considered X-ray shielding, mechanical, density, water absorption, and morphological properties. The results showed that the overall X-ray shielding parameters, namely the linear attenuation coefficient (µ), mass attenuation coefficient (µm), and lead equivalent thickness (Pbeq), of the WPVC composites increased with increasing Bi2O3 contents but slightly decreased at higher wood contents (40 pph). Furthermore, comparative Pbeq values between the wood/PVC composites and similar commercial X-ray shielding boards indicated that the recommended Bi2O3 contents for the 20 pph (40 ph) wood/PVC composites were 35, 85, and 40 pph (40, 100, and 45 pph) for the attenuation of 60, 100, and 150-kV X-rays, respectively. In addition, the increased Bi2O3 contents in the WPVC composites enhanced the Izod impact strength, hardness (Shore D), and density, but reduced water absorption. On the other hand, the increased wood contents increased the impact strength, hardness (Shore D), and water absorption but lowered the density of the composites. The overall results suggested that the developed WPVC composites had great potential to be used as effective X-ray shielding materials with Bi2O3 acting as a suitable X-ray protective filler.

scholarly journals Soil Moisture Dynamics in Response to Precipitation and Thinning in a Semi-Dry Forest in Northern Mexico

Water ◽  
2021 ◽  
Vol 13 (1) ◽  
pp. 105
Author(s):  
Argelia E. Rascón-Ramos ◽  
Martín Martínez-Salvador ◽  
Gabriel Sosa-Pérez ◽  
Federico Villarreal-Guerrero ◽  
Alfredo Pinedo-Alvarez ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Forest Management ◽  
Water Availability ◽  
Dry Forest ◽  
Rainfall Events ◽  
Rainfall Characteristics ◽  
Northern Mexico ◽  
The Difference ◽  
The Impact ◽  
Moisture Dynamics

Understanding soil moisture behavior in semi-dry forests is essential for evaluating the impact of forest management on water availability. The objective of the study was to analyze soil moisture based in storm observations in three micro-catchments (0.19, 0.20, and 0.27 ha) with similar tree densities, and subject to different thinning intensities in a semi-dry forest in Chihuahua, Mexico. Vegetation, soil characteristics, precipitation, and volumetric water content were measured before thinning (2018), and after 0%, 40%, and 80% thinning for each micro-catchment (2019). Soil moisture was low and relatively similar among the three micro-catchments in 2018 (mean = 8.5%), and only large rainfall events (>30 mm) increased soil moisture significantly (29–52%). After thinning, soil moisture was higher and significantly different among the micro-catchments only during small rainfall events (<10 mm), while a difference was not noted during large events. The difference before–after during small rainfall events was not significant for the control (0% thinning); whereas 40% and 80% thinning increased soil moisture significantly by 40% and 53%, respectively. Knowledge of the response of soil moisture as a result of thinning and rainfall characteristics has important implications, especially for evaluating the impact of forest management on water availability.

scholarly journals Alternative Control of Phragmidium rubi-idaei Infecting Two Rubus Species

Plants ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1452
Author(s):  
Raluca-Maria Pârlici ◽  
Aurel Maxim ◽  
Stefania Mirela Mang ◽  
Ippolito Camele ◽  
Lucia Mihalescu ◽  
...  
Keyword(s):  
Organic Farming ◽  
Plant Pathogens ◽  
Field Experiments ◽  
Control Sample ◽  
Field Tests ◽  
In Vitro Tests ◽  
Rust Disease ◽  
Conidia Germination ◽  
The Impact

Organic berry plantations have been gaining popularity among farmers during recent years. Even so, farmers experience serious challenges in disease control management, which is a concern in organic farming. Phragmidiumrubi-idaei (DC) P. Karst is the pathogen responsible for blackberry and raspberry rust disease, one of the most present and active diseases in plantations. The antifungal certified products found on the organic farming market offer the opportunity for an efficient control strategy over plant pathogens in fruit shrub plantations. In this study, 5 natural based products—namely Altosan, Mimox, Canelys, Zitron, and Zeolite—were tested for their fungistatic effect over P. rubi-idaei. The experiments were carried out under laboratory conditions, performing observations over the impact of organic products, used at different concentration levels, on rust conidia germination. Moreover, field experiments were conducted in order to evaluate the efficiency of different treatments for rust control on raspberry (‘Polka’, ‘Veten’ and ‘Heritage’) and blackberry (‘Thorn Free’, ‘Chester’ and ‘Loch Ness’) varieties. Data analysis based on ANOVA tests showed significant differences between the tested variants and the control sample at p < 0.001. Furthermore, LSD test confirmed differences between all substances tested (p < 0.005). The natural products Canelys (formulated with cinnamon) and Zytron (based on citrus extract) have proven the highest inhibitory capacity for conidia germination during in vitro tests registering values of 80.42% and 78.34%, respectively. The same high inhibitory rates against rust pathogen were kept also in the field tests using the same two natural-based products mentioned earlier. In addition, outcomes from this study demonstrated that Zeolite is not recommended for raspberry or blackberry rust control.

scholarly journals 216. Are Automatic Antimicrobial Stop Orders an Effective Stewardship Tool for Urinary Tract and Intra-Abdominal Infections?

2020 ◽  
Vol 7 (Supplement_1) ◽  
pp. S110-S110
Author(s):  
Christina Maguire ◽  
Dusten T Rose ◽  
Theresa Jaso
Keyword(s):  
Urinary Tract ◽  
Antimicrobial Therapy ◽  
Source Control ◽  
Clostridioides Difficile ◽  
Days Of Therapy ◽  
Before And After ◽  
The Difference ◽  
Tract Infections ◽  
Length Of Therapy ◽  
The Impact

Abstract Background Automatic antimicrobial stop orders (ASOs) are a stewardship initiative used to decrease days of therapy, prevent resistance, and reduce drug costs. Limited evidence outside of the perioperative setting exists on the effects of ASOs on broad spectrum antimicrobial use, discharge prescription duration, and effects of missed doses. This study aims to evaluate the impact of an ASO policy across a health system of adult academic and community hospitals for treatment of intra-abdominal (IAI) and urinary tract infections (UTI). ASO Outcome Definitions ASO Outcomes Methods This multicenter retrospective cohort study compared patients with IAI and UTI treated before and after implementation of an ASO. Patients over the age of 18 with a diagnosis of UTI or IAI and 48 hours of intravenous (IV) antimicrobial administration were included. Patients unable to achieve IAI source control within 48 hours or those with a concomitant infection were excluded. The primary outcome was the difference in sum length of antimicrobial therapy (LOT). Secondary endpoints include length and days of antimicrobial therapy (DOT) at multiple timepoints, all cause in hospital mortality and readmission, and adverse events such as rates of Clostridioides difficile infection. Outcomes were also evaluated by type of infection, hospital site, and presence of infectious diseases (ID) pharmacist on site. Results This study included 119 patients in the pre-ASO group and 121 patients in the post-ASO group. ASO shortened sum length of therapy (LOT) (12 days vs 11 days respectively; p=0.0364) and sum DOT (15 days vs 12 days respectively; p=0.022). This finding appears to be driven by a decrease in outpatient LOT (p=0.0017) and outpatient DOT (p=0.0034). Conversely, ASO extended empiric IV LOT (p=0.005). All other secondary outcomes were not significant. Ten patients missed doses of antimicrobials due to ASO. Subgroup analyses suggested that one hospital may have influenced outcomes and reduction in LOT was observed primarily in sites without an ID pharmacist on site (p=0.018). Conclusion While implementation of ASO decreases sum length of inpatient and outpatient therapy, it may not influence inpatient length of therapy alone. Moreover, ASOs prolong use of empiric intravenous therapy. Hospitals without an ID pharmacist may benefit most from ASO protocols. Disclosures All Authors: No reported disclosures

Sign in / Sign up

Export Citation Format

Share Document