Overview of a more simplified new channel model to synthesize total attenuation time series for satellite communication systems at Ka and Q/V bands

2013 ◽  
Vol 22 (2-4) ◽  
pp. 59-70 ◽  
Author(s):  
X. Boulanger ◽  
G. Carrie ◽  
L. Castanet ◽  
L. Feral



2021 ◽  
Vol 2 ◽  
Author(s):  
Joan Palacios ◽  
Nuria González-Prelcic ◽  
Carlos Mosquera ◽  
Takayuki Shimizu ◽  
Chang-Heng Wang

5G and future cellular networks intend to incorporate low earth orbit (LEO) satellite communication systems (SatCom) to solve the coverage and availability problems that cannot be addressed by satellite-based or ground-based infrastructure alone. This integration of terrestrial and non terrestrial networks poses many technical challenges which need to be identified and addressed. To this aim, we design and simulate the downlink of a LEO SatCom compatible with 5G NR, with a special focus on the design of the beamforming codebook at the satellite side. The performance of this approach is evaluated for the link between a LEO satellite and a mobile terminal in the Ku band, assuming a realistic channel model and commercial antenna array designs, both at the satellite and the terminal. Simulation results provide insights on open research challenges related to analog codebook design and hybrid beamforming strategies, requirements of the antenna terminals to provide a given SNR, or required beam reconfiguration capabilities among others.



2020 ◽  
Vol 10 (15) ◽  
pp. 5041
Author(s):  
Zaixue Wei ◽  
Qipeng Tang ◽  
Jian Geng ◽  
Sibo Chen ◽  
Lin Sang ◽  
...  

Channel modeling is crucial to the development and evaluation of modern wireless communication systems including satellite communication system, since there might be critical safty-of-life applications. Also, the channel model is of great importance to the performance evaluation of mobile communication systems. In recent years, encouraged by the widely application of unmanned aerial vehicles, the research on channel modeling for aerial and aeronautical communications attract lots of interests. In the published articles, stationary and non-stationary channel models have been developed for air-to-ground communications based on regular shaped geometry-based stochastic model (RS-GBSM). The modeling of air-to-air or satellite-to-aircraft (S2A) communication is still quite simple or completely lacking. For obtaining more precise model of S2A channel, this paper presents an analytical non-stationary S2A channel mode based on RS-GBSM with considerations on line-of-sight path, specular reflection path, and ground scattering path. Analytical expressions of the channel impulse responses, the transfer functions, the auto-correlation functions, and the Doppler power spectrum density based on 3-path model are derived and simulated. Also, the distributions of the path antennation, the path delay, and the normalized Doppler shift based on uniform distribution of the scatterers are derived, simulated and fitted.



2019 ◽  
Vol 13 (4) ◽  
pp. 374-381
Author(s):  
Tao Kai ◽  
Sun Xiaoyun ◽  
Wang Yang ◽  
Jingchun Li

Background: As the multimedia service develops and the transmission rate in terrestrial communication systems increases rapidly, satellite communication needs to improve the transmission rate and throughput. Multiple Input Multiple Output (MIMO) techniques can increase the system capacity significantly by introducing the space dimension, as the system bandwidth remains the same. Therefore, utilization of MIMO for satellite communications to increase the capacity is an important research topic. So MIMO techniques for multibeam satellite communications are researched in the dissertation. Objective: The goal of this work is improving the capacity of the satellite system. Multi-beam and dual-polarized technologies are applied to a satellite system to improve the capacity further. Methods: In this paper, we first introduce a multi-beam dual-polarized satellite multi-put and multiout (MBDP-S-MIMO) system which combines the full frequency multiplexing and dual-polarization technologies. Then the system model and channel model are first constructed. At last, to improve the capacity further, BD and BD-ZF precoding algorithms are applied to MBDP-S-MIMO and their performance is verified by simulation. Results: Simulation results show the performance of the BD precoding algorithm gets better with the growth of the XPD at the receiver and is almost not affected by the growth of the channel polarization correlation coefficient. In addition, with the growth of the users’ speed, the performance becomes worse. Conclusion: The multi-beam dual-polarized satellite MIMO system has high capacity, and it has certain application prospects for satellite communication.



2012 ◽  
Vol 2012 ◽  
pp. 1-16 ◽  
Author(s):  
Nicolas Jeannin ◽  
Laurent Féral ◽  
Henri Sauvageot ◽  
Laurent Castanet ◽  
Frédéric Lacoste

The design and optimization of propagation impairment techniques for space telecommunication systems operating at frequencies above 20 GHz require a precise knowledge of the propagation channel both in space and time. For that purpose, space-time channel models have to be developed. In this paper the description of a model for the simulation of long-term rain attenuation time series correlated both in space and time is described. It relies on the definition of a stochastic rain field simulator constrained by the rain amount outputs of the ERA-40 reanalysis meteorological database. With this methodology, realistic propagation conditions can be generated at the scale of satellite coverage (i.e., over Europe or USA) for many years. To increase the temporal resolution, a stochastic interpolation algorithm is used to generate spatially correlated time series sampled at 1 Hz, providing that way valuable inputs for the study of the performances of propagation impairment techniques required for adaptive SatCom systems operating at Ka band and above.



2007 ◽  
Vol 25 (6) ◽  
pp. 575-601 ◽  
Author(s):  
Joël Lemorton ◽  
Laurent Castanet ◽  
Frédéric Lacoste ◽  
Carlo Riva ◽  
Emilio Matricciani ◽  
...  




Sign in / Sign up

Export Citation Format

Share Document