scholarly journals USE OF DYNAMIC BLOCKS FOR CREATION OF ELECTRONIC IMAGE LIBRARIES OF TYPICAL FIXING ELEMENTS BY AUTO CAD RESOURCES

2021 ◽  
pp. 108-117
Author(s):  
Tetjana Gnitetska ◽  
Galyna Gnitetska ◽  
Evgeniy Pustovit
Keyword(s):  
Computer Aided Design ◽  
Educational Process ◽  
Design System ◽  
Resource Saving ◽  
Design Work ◽  
Image Libraries ◽  
Kyiv Polytechnic Institute ◽  
Aided Design ◽  
The Impact ◽  
Auto Cad

The use of electronic libraries of parameterized images of objects made in the form of dynamic blocks in the practice of design work refers to resource-saving technologies that are actively used in modern production. The article considers an example of creating parameterized simplified images of fasteners using dynamic blocks of the computer-aided design system AutoCAD. Dynamic blocks can be used to create electronic image libraries of technological, design, electrical and other elements. The algorithm considered in the article to create dynamic blocks of simplified images of fasteners is introduced into the educational process at the Kyiv Polytechnic Institute named after Igor Sikorsky in the course "Engineering and Computer Graphics" and can be used in design practice. The testing of this algorithm in the training process yielded a positive result. When using parameterized drawings, students understand more deeply the impact of each parameter on the design of the object.

Structural Analysis of Product and Computer-Aided Assembly Planning in AssemBL Software Package

2018 ◽  
pp. 11-33
Author(s):  
A. N. Bozhko
Keyword(s):  
Computer Aided Design ◽  
State Of The Art ◽  
Graph Model ◽  
Design System ◽  
Assembly Planning ◽  
Complex Products ◽  
Assembly Sequences ◽  
Computer Aided ◽  
Cad Cam ◽  
Aided Design

Computer-aided design of assembly processes (Computer aided assembly planning, CAAP) of complex products is an important and urgent problem of state-of-the-art information technologies. Intensive research on CAAP has been underway since the 1980s. Meanwhile, specialized design systems were created to provide synthesis of assembly plans and product decompositions into assembly units. Such systems as ASPE, RAPID, XAP / 1, FLAPS, Archimedes, PRELEIDES, HAP, etc. can be given, as an example. These experimental developments did not get widespread use in industry, since they are based on the models of products with limited adequacy and require an expert’s active involvement in preparing initial information. The design tools for the state-of-the-art full-featured CAD/CAM systems (Siemens NX, Dassault CATIA and PTC Creo Elements / Pro), which are designed to provide CAAP, mainly take into account the geometric constraints that the design imposes on design solutions. These systems often synthesize technologically incorrect assembly sequences in which known technological heuristics are violated, for example orderliness in accuracy, consistency with the system of dimension chains, etc.An AssemBL software application package has been developed for a structured analysis of products and a synthesis of assembly plans and decompositions. The AssemBL uses a hyper-graph model of a product that correctly describes coherent and sequential assembly operations and processes. In terms of the hyper-graph model, an assembly operation is described as shrinkage of edge, an assembly plan is a sequence of shrinkages that converts a hyper-graph into the point, and a decomposition of product into assembly units is a hyper-graph partition into sub-graphs.The AssemBL solves the problem of minimizing the number of direct checks for geometric solvability when assembling complex products. This task is posed as a plus-sum two-person game of bicoloured brushing of an ordered set. In the paradigm of this model, the brushing operation is to check a certain structured fragment for solvability by collision detection methods. A rational brushing strategy minimizes the number of such checks.The package is integrated into the Siemens NX 10.0 computer-aided design system. This solution allowed us to combine specialized AssemBL tools with a developed toolkit of one of the most powerful and popular integrated CAD/CAM /CAE systems.

scholarly journals Computer-aided design of multi-purpose steel headframes for mines with a new technical level

2020 ◽  
Vol 174 ◽  
pp. 01048
Author(s):  
Elena Kassikhina ◽  
Vladimir Pershin ◽  
Nina Rusakova
Keyword(s):  
Cross Sections ◽  
Computer Aided Design ◽  
Information Technologies ◽  
Three Dimensional ◽  
Numerical Control ◽  
Technical Level ◽  
Resource Saving ◽  
Existing Structures ◽  
Set Up ◽  
Aided Design

The existing structures of the steel sinking headgear and permanent headframe do not meet the requirements of resource saving (metal consumption and manpower input at installation), and the present methods of the headframe designing do not fully reflect recent possibilities of applying of the advanced information technologies. Technical level of the modern software makes it possible for designers to set up multiple numerical experiments to create a computer simulation that allows solving the problem without field and laboratory experiments, and therefore without special costs. In this regard, a mathematical simulation has been developed and based on it, software to select cross-sections of multi- purpose steel headframe elements and to calculate proper weight of its metal structures depending on the characteristics and hoisting equipment. A headframe drawing is displayed, as the results of the software work, including list of elements, obtained optimal hoisting equipment in accordance with the initial data. The software allows speeding up graphic work and reducing manpower input on calculations and paper work. The software allows developing a three-dimensional image of the structure and its functional blocks, based on the obtained initial parameters, as well as developing control software for units with numerical control (NC) in order to manufacture multi-purpose headframes.

Computer Aided Design of Transmission Components of Liquid Stirred Tank

2011 ◽  
Vol 109 ◽  
pp. 711-714
Author(s):  
Ying Jiang ◽  
Jie Liu
Keyword(s):  
Computer Aided Design ◽  
Automatic Generation ◽  
Structure Design ◽  
Stirred Tank ◽  
Design System ◽  
Design Requirement ◽  
Design Efficiency ◽  
The Common ◽  
Aided Design ◽  
Develop System

Secondary develop system can realize design automation of the common parts, so that software system can automatically inquire the chart and get data, then this could really release design personnel and improve the design efficiency. By secondary develop system of stirred tank users can respectively carry on the design according to their own needs. So secondary develop system has the function of automatic generation graphics, and can generate CAD drawings complying with the design requirement, so it reflected the intelligent performance of the design system. Secondary develop system is able to complete the automatic design of common parts, and can greatly improve the quality and efficiency of design, so it has very important use value. This design realizes the function of automatic graphics generation of transmission of stirred tank, and can generate structure design of common belt wheel.

Use of the designer's experience in systems of computer-aided design and artificial intelligence

2021 ◽  
pp. 89-95
Author(s):  
А.И. Гайкович ◽  
С.И. Лукин ◽  
О.Я. Тимофеев
Keyword(s):  
Artificial Intelligence ◽  
Fuzzy Sets ◽  
Computer Aided Design ◽  
Design Tool ◽  
Design System ◽  
Design Problems ◽  
General Arrangement ◽  
Computer Aided ◽  
A Chain ◽  
Aided Design

Процесс создания проекта судна или корабля рассматривается как преобразование информации, содержащейся в техническом задании на проектирование, нормативных документах и знаниях проектанта, в информацию, объем которой позволяет реализовать проект. Проектирование может быть представлено как поиск решения в пространстве задач. Построение цепочки последовательно решаемых задач составляет методику проектирования. Проектные задачи могут быть разбиты на две группы. Первая группа ‒ это полностью формализуемые задачи, для решения которых есть известные алгоритмы. Например, построение теоретического чертежа по известным главным размерениям и коэффициентам формы. Ко второй группе задач можно отнести трудно формализуемые или неформализуемые задачи. Например, к задачам этого типа можно отнести разработку общего расположения корабля. Важнейшим инструментом проектирования современного корабля или судна является система ав­томатизированного проектирования (САПР). Решение САПР задач первой группы не представляет проблемы. Введение в состав САПР задач второй группы подразумевает разработку специального ма­тематического аппарата, базой для которого, которым является искусственный интеллект, использующий теорию нечетких множеств. Однако, настройка искусственных нейронных сетей, создание шкал для функций принадлежности элементов нечетких множеств и функций предпочтений лица принимающего решения, требует участие человека. Таким образом, указанные элементы искусственного интеллекта фиксируют качества проек­танта как специалиста и создают его виртуальный портрет. The process of design a project of a ship is considered as the transformation of information contained in the design specification, regulatory documents and the designer's knowledge into information, the volume of which allows the project to be implemented. Designing can be represented as a search for a solution in the space of problems. The construction of a chain of sequentially solved tasks constitutes the design methodology. Design problems can be divided into two groups. The first group is completely formalizable tasks, for the solution of which there are known algorithms. For example, the construction of ship's surface by known main dimensions and shape coefficients. Tasks of the second group may in­clude those which are difficult to formalize or non-formalizable. For example, tasks of this type can include develop­ment of general arrangement of a ship. The most important design tool of a modern ship or vessel is a computer-aided design system (CAD). The solu­tion of CAD problems of the first group is not a problem. Introduction of tasks of the second group into CAD implies development of a special mathematical apparatus, the basis for which is artificial intelligence, which uses the theory of fuzzy sets. However, the adjustment of artificial neural networks, the creation of scales for membership functions of fuzzy sets elements and functions of preferences of decision maker, requires human participation. Thus, the above elements of artificial intelligence fix the qualities of the designer as a specialist and create his virtual portrait.

Pathfinder Algorithm Modification for CPLD and FPGA Routing Stage

2021 ◽  
Vol 26 (5) ◽  
pp. 399-409
Author(s):  
M.A. Zapletina ◽  
◽  
S.V. Gavrilov ◽  
◽  
Keyword(s):  
Computer Aided Design ◽  
Digital Circuits ◽  
Routing Algorithm ◽  
Design Flow ◽  
Negative Effect ◽  
Industrial Projects ◽  
Placement And Routing ◽  
Aided Design ◽  
The Impact

One of the main advantages of FPGA and CPLD is the high development speed; therefore, the importance of effective computer-aided design tools for modern microcircuits of these classes cannot be overestimated. Placement and routing are the most time-consuming stages of FPGA/CPLD design flow. The quality of results of these stages is crucial to the final perfor-mance of custom digital circuits implemented on FPGA/CPLD. The paper discusses an approach to accelerating the routing stage within the layout synthesis flow for FPGA/CPLD by introducing a few algorithmic improvements to a routing procedure. The basic routing algorithm under study is a modified Pathfinder for a mixed routing resource graph. Pathfinder is a well-known negotiation-based routing algorithm that works on the principle of iteratively eliminating congestions of chip routing resources. For experiments, the sets of test digital circuits ISCAS'85, ISCAS'89, LGSynth'89 and several custom industrial projects were used. The impact of the proposed algorithmic improvements was analyzed using four FPGA/CPLD architectures. It has been established that due to the improvements of the algorithm proposed in the paper, the average reduction in routing time was from 1.3 to 2.6 times, depending on the FPGA/CPLD architecture, with no significant negative effect on the timing characteristics of the designed circuits.

Highways Design Taking into Account Climatic Features in the Route Area

2021 ◽  
pp. 125-136
Author(s):  
Т. В. Самодурова ◽  
Н. Ю. Алимова ◽  
О. А. Волокитина ◽  
О. В. Гладышева
Keyword(s):  
Bearing Capacity ◽  
Computer Aided Design ◽  
Systematic Approach ◽  
Weather Conditions ◽  
Design Stage ◽  
Design System ◽  
Computer Aided ◽  
Calculation Methodology ◽  
Aided Design ◽  
Climatic Features

Постановка задачи. Для получения оптимальных проектных решений, удовлетворяющих условиям безопасности движения в сложных погодных условиях, необходимо сравнение вариантов автомобильных дорог по условиям снегонезаносимости. Такие расчеты должны стать составной частью системы автоматизированного проектирования САПР-АД. Результаты. Предложен системный поход к решению задачи, определен перечень информации, необходимой для проведения расчетов. Выполнен анализ результатов исследований по снегозаносимости дорог, проводимых в России и за рубежом. Предложены расчетные схемы и модели для оценки вариантов продольного профиля и земляного полотна автомобильной дороги по снегозаносимости. Предложены решения для оценки вариантов плана трассы с использованием карт с расчетными параметрами метелей. Выводы. Реализация предложенной методики проведения расчетов позволит на стадии проектирования оценить варианты автомобильной дороги по условиям снегозаносимости. Statement of the problem. In order to obtain optimal design solutions that meet the conditions of safety traffic in difficult weather conditions, it is necessary to compare the options of highways according to the snow tolerance conditions. Such calculations should become an integral part of the CAD-AD computer-aided design system. Results. A systematic approach to solving the problem is set forth, a list of information necessary for calculations is identified. The results analysis of studies on the snow-bearing capacity of roads conducted in Russia and abroad is carried out. Calculation schemes and models are suggested to evaluate options for the longitudinal profile and the roadbed for the snow-bearing capacity. Solutions for evaluating variants of the route plan using maps with calculated parameters of snowstorms are proposed. Conclusions. The implementation of the proposed calculation methodology will make it possible at the design stage to evaluate the options of the highway according to the conditions of the snow-bearing capacity.

Sign in / Sign up

Export Citation Format

Share Document