scholarly journals Chemical and mechanical methods on fruit setting and pomological traits of Chinese jujube (Ziziphus jujuba Mill.) under Czech agro climatic condition

2020 ◽  
Vol 197 (6) ◽  
pp. 17-25
Author(s):  
Saket Mishra ◽  
Mithun Tarafdar ◽  
Ravi Kumar Singh
Keyword(s):  
Climatic Condition ◽  
Fruit Set ◽  
The Other ◽  
Not Given ◽  
Chinese Jujube ◽  
Mechanical Methods ◽  
Fruit Setting ◽  
Different Types ◽  
Ziziphus Jujuba ◽  
Bud Breaking

Abstract. The aim of this research was conducted to improve fruit set using different types of treatments and to find out the best treatment on the basis of number of fruits and pomological traits. For the research, ten years old 12 Lang cultivar of jujube trees and 3 seedlings from open pollinated of Ukraine genotypes were used. The tree spacing was 3.50×1.26 m. Spraying of Borax showed that average numbers of fruits were higher than the other treatments, average values of height, weight, width and thickness were also higher than the other treatments. On the other hand Urea and Girdling gave poor results in both years. In case of seedlings, different treatments for fruit setting have not given good results. Spraying with different treatments did not affect fruit-setting and pomological characteristics as well, in a larger scale. In 2006, bud breaking started in jujube cultivars on 28th April and in seedlings on 6th May. In 2007, bud breaking started in jujube cultivars 11 days earlier and 10 days earlier on 26th April in seedling. In jujube cultivars, there were some variations in the dates of flowering during 2006; the average date of flowering was 26th June in 2006 for all cultivars of jujube. In seedlings, flowering started on 6th July 2006. During 2007 flowering started in jujube cultivar jujube cultivars started flowering 12 days earlier and seedlings 22 days earlier. During 2006, fruit set started in jujube cultivars and seedlings, on 12th July and 14th July respectively. During 2007, fruit set started in jujube cultivars and seedlings on 1st July and 10th July respectively. In 2007 fruit set in jujube cultivars started 11 days earlier and in seedlings 4 days earlier. During 2006, ripening started in jujube cultivars and seedlings on 26th Sept. During 2007 ripening started in jujube cultivars and seedlings on 2nd and 10th Sep. respectively. In 2007, ripening started in jujube cultivars 24 days earlier and seedlings 16 days earlier. Statistical evaluations of the data showed the differences between 2006 and 2007.

Growth and yield of 3 hybrid papayas (Carica papaya L.) under mulched and bare ground conditions

2000 ◽  
Vol 40 (5) ◽  
pp. 747 ◽  
Author(s):  
R. J. Elder ◽  
W. N. B. Macleod ◽  
D. J. Reid ◽  
R. L. Gillespie
Keyword(s):  
Carica Papaya ◽  
Fruit Set ◽  
Fruit Weight ◽  
The Other ◽  
Growth And Yield ◽  
Stem Height ◽  
Bare Ground ◽  
Fruit Setting ◽  
Ground Conditions ◽  
Intermediate Time

At Yarwun (151.3˚E, 23.75˚S), Australia, papaya Hybrid 29 yielded twice as much fruit as Hybrid 11 and 30% more than Hybrid 13. The plots mulched with coarse grass hay yielded 50% more fruit than the plots with bare ground. The highest yielding treatment, Hybrid 29 + mulch, averaged the equivalent of 81 t/ha.year over the 16.5-month harvest period. The yields were achieved in spite of inadequate water supply due to drought and the loss of 877 plants from 1441 plant positions (4 plants per position) due to the 3 phytoplasma diseases; dieback, yellow crinkle and mosaic. Hybrid 29 produced higher yields than the other hybrids by flowering early on shorter plants with thicker stems and setting more fruit that commenced lower down on the stem. Hybrid 13 was intermediate in size and the amount of fruit setting between Hybrid 29 and Hybrid 11 but was the slowest to flower and set fruit. Hybrid 11 had the thinnest and tallest stems, flowered at an intermediate time between the other 2 hybrids and produced fewer flowers and fruit resulting in the lowest yield. Mulching increased stem height and thickness, promoted earlier flowering and increased fruit set, yield and average fruit weight

Study on Pollination Characteristics and Hybrid Offspring Analysis on Hickory (Carya cathayensis)

2012 ◽  
Vol 610-613 ◽  
pp. 3289-3297
Author(s):  
Zheng Jia Wang ◽  
Ian Qin Huang ◽  
You Jun Huang ◽  
Bing Zhang ◽  
Bing Song Zheng
Keyword(s):  
Fruit Set ◽  
Female Parent ◽  
Female Flower ◽  
Phenotypic Characteristics ◽  
Ornamental Tree ◽  
Significant Difference ◽  
Fruit Setting ◽  
Different Types ◽  
Carya Cathayensis

Hickory (Carya cathayensis) is an important ornamental tree in China. Crossbreeding is carried out with hickory as female parent, pollinating with pecan (C. illinoensis) pollen and other different types of pollen treatments. Fruit set percentage, fruits and seeds characters, pollen germination in vitro and situ and identification of seedling using AFLP and RAPD are studied in order to get pollination characteristics on hickory. The results showed that hickory and pecan pollens were not germination on 14 different components media. Hickory pollens start germinating on the female flower stigma pollinated after 8 h and universal after 24 h using Scanning electron microscopy (SEM). There is a small amount of fruits under cover treatment, without-pollination treatment and 2, 4-D treatment. The rate of fruit setting is the biggest up to 42.2% when female flowers are pollinated with mixed pollen within populations on hickory. Among harvested fruits and seeds, fruit phenotypic characteristics show large variation when pollinating with pecan. Fruits and seeds weight and size are significant difference comparing with the control. The frequency of polyembryony is about 9.04%. Offsprings of C. cathayensis × C. illinoensis are not true hybrids using AFLP and RAPD analysis. The variation of fruits is due to xenia effect. These results suggested that apomixis mechanism might exist on hickory.

Circulating Anticoagulant (Antifactor VIII) Treated with Immunosuppressive Drugs

1969 ◽  
Vol 21 (02) ◽  
pp. 249-258 ◽  
Author(s):  
L. A Sherman ◽  
M. A Goldstein ◽  
H. S Sise
Keyword(s):  
Factor Viii ◽  
Conventional Therapy ◽  
Immunosuppressive Drugs ◽  
The Other ◽  
Not Given ◽  
Factor Viii Concentrates ◽  
Short Courses

SummaryThree cases have been presented who had a circulating antifactor VIII anticoagulant developing spontaneously in non-hemophilic subjects. Following two short courses of azathioprine in one case there were transient incomplete remissions of a degree not seen in the previous 4 months of observation. In the other two cases complete remissions were observed within three weeks of beginning administration of 6-mercaptopurine. In one of these, a brief relapse was retreated successfully. In 4 other cases not given these drugs and in cases reported in the literature, such a rapid remission was not seen to occur spontaneously and happened only infrequently in cases given corticosteroids. On the basis of this experience, we suggest that in the treatment of antifactor VIII, if the disorder shows no improvement with conventional therapy (blood, factor VIII concentrates, and corticosteroids), a trial with immunosuppressive drugs is warranted.

Comparative Surface Imaging Study of Multifocal Diffractive Intraocular Lenses

2021 ◽  
Author(s):  
Hyeck Soo Son ◽  
Jung Min Lee ◽  
Ramin Khoramnia ◽  
Chul Young Choi
Keyword(s):  
Imaging Study ◽  
The Other ◽  
Intraocular Lenses ◽  
Optical Surface ◽  
Diffractive Optic ◽  
Atomic Force ◽  
Acceptable Range ◽  
Different Types ◽  
Concentric Pattern

Abstract Purpose To analyse and compare the surface topography and roughness of three different types of diffractive multifocal IOLs. Methods Using scanning electron microscope (SEM, Inspect F, 5.0 KV, maximum magnification up to 20,000) and atomic force microscope (AFM, Park Systems, XE-100, non-contact, area profile comparison, 10 × 10 µm, 40 × 40 µm), the surface quality of the following diffractive IOLs was studied: the AcrySof IQ PanOptix (Alcon, USA), the AT LARA 829MP (Carl Zeiss Meditec, Germany), and Tecnis Symfony (Johnson&Johnson Vision, USA). The measurements were made over three representative areas (central non-diffractive optic, central diffractive optic, and diffractive step) of each IOL. Roughness profile in terms of mean arithmetic roughness (Ra) and root-mean-squared roughness (Rq) values were obtained and compared statistically. Results In SEM examination, all IOLs showed a smooth optical surface without any irregularities at low magnification. At higher magnification, Tecnis Symfony showed unique highly regular, concentric, and lineate structures in the diffractive optic area which could not be seen in the other studied diffractive IOLs. The differences in the measured Ra and Rq values of the Tecnis Symfony were statistically significant compared to the other models (p < 0.05). Conclusion Various different topographical traits were observed in three diffractive multifocal IOLs. The Ra values of all studied IOLs were within an acceptable range. Tecnis Symfony showed statistically significant higher surface Ra values at both central diffractive optic and diffractive step areas. Furthermore, compared to its counterparts, Tecnis Symfony demonstrated highly ordered, concentric pattern in its diffractive surfaces.

RADIATION EXPOSURE TO THE BACK WITH DIFFERENT TYPES OF APRONS

2021 ◽  
Author(s):  
Seung Wan Hong ◽  
Tae Won Kim ◽  
Jae Hun Kim
Keyword(s):  
Radiation Exposure ◽  
Effective Dose ◽  
Exposure Time ◽  
The Other ◽  
Lead Apron ◽  
Type Group ◽  
Air Kerma ◽  
Different Types ◽  
The Relationship

Abstract Physicians and nurses stand with their back towards the C-arm fluoroscope when using the computer, taking things out of closets and preparing drugs for injection or instruments for intervention. This study was conducted to investigate the relationship between the type of lead apron and radiation exposure to the backs of physicians and nurses while using C-arm fluoroscopy. We compared radiation exposure to the back in the three groups: no lead apron (group C), front coverage type (group F) and wrap-around type (group W). The other wrap-around type apron was put on the bed instead of on a patient. We ran C-arm fluoroscopy 40 times for each measurement. We collected the air kerma (AK), exposure time (ET) and effective dose (ED) of the bedside table, upper part and lower part of apron. We measured these variables 30 times for each location. In group F, ED of the upper part was the highest (p &lt; 0.001). ED of the lower part in group C and F was higher than that in group W (p = 0.012). The radiation exposure with a front coverage type apron is higher than that of the wrap-around type and even no apron at the neck or thyroid. For reducing radiation exposure to the back of physician or nurse, the wrap-around type apron is recommended. This type of apron can reduce radiation to the back when the physician turns away from the patient or C-arm fluoroscopy.

scholarly journals MITOTIC CROSSING OVER AND NONDISJUNCTION IN TRANSLOCATION HETEROZYGOTES OF ASPERGILLUS

Genetics ◽  
1976 ◽  
Vol 82 (4) ◽  
pp. 605-627
Author(s):  
Etta Käfer
Keyword(s):  
Selective Advantage ◽  
The Other ◽  
Translocation Chromosome ◽  
Crossing Over ◽  
Selective Marker ◽  
Reciprocal Translocations ◽  
Poor Growth ◽  
Different Types ◽  
Diploid Genotype ◽  
One Step

ABSTRACT To analyze mitotic recombination in translocation heterozygotes of A. nidulans two sets of well-marked diploids were constructed, homo- or heterozygous for the reciprocal translocations T1(IL;VIIR) or T2(IL;VIIIR) and heterozygous for selective markers on IL. It was found that from all translocation heterozygotes some of the expected mitotic crossover types could be selected. Such crossovers are monosomic for one translocated segment and trisomic for the other and recovery depends on the relative viabilities of these unbalanced types. The obtained segregants show characteristically reduced growth rates and conidiation dependent on sizes and types of mono- and trisomic segments, and all spontaneously produce normal diploid sectors. Such secondary diploid types either arose in one step of compensating crossing over in the other involved arm, or—more conspicuously—in two steps of nondisjunction via a trisomic intermediate.—In both of the analyzed translocations the segments translocated to IL were extremely long, while those translocated from IL were relatively short. The break in I for T1(I;VII) was located distal to the main selective marker in IL, while that of T2(I;VIII) had been mapped proximal but closely linked to it. Therefore, as expected, the selected primary crossover from the two diploids with T2(I;VIII) in coupling or in repulsion to the selective marker, showed the same chromosomal imbalance and poor growth. These could however be distinguished visually because they spontaneously produced different trisomic intermediates in the next step, in accordance with the different arrangement of the aneuploid segments. On the other hand, from diploids heterozygous for T1(I;VII) mitotic crossovers could only be selected when the selective markers were in coupling with the translocation; these crossovers were relatively well-growing and produced frequent secondary segregants of the expected trisomic, 2n+VII, type. For both translocations it was impossible to recover the reciprocal crossover types (which would be trisomic for the distal segments of I and monosomic for most of groups VII or VIII) presumably because these were too inviable to form conidia.—In addition to the selected segregants of expected types a variety of unexpected ones were isolated. The conditions of selection used favour visual detection of aneuploid types, even if these produce only a few conidial heads and are not at a selective advantage. For T2(I;VIII) these "non-selected" unbalanced segregants were mainly "reciprocal" crossovers of the same phenotype and imbalance as the selected ones. For T1(I;VII) two quite different types were obtained, both possibly originating with loss of the small VII-Itranslocation chromosome. One was isolated when the selective marker in repulsion to T1(I;VII) was used and, without being homo- or hemizygous for the selective marker, it produced stable sectors homozygous for this marker. The other was obtained from both coupling and repulsion diploids and showed a near-diploid genotype; it produced practically only haploid stable sectors of the type expected from monosomics, 2n-1 for the short translocation chromosome.

scholarly journals Development of Speech Recognition Systems in Emergency Call Centers

Symmetry ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 634
Author(s):  
Alakbar Valizada ◽  
Natavan Akhundova ◽  
Samir Rustamov
Keyword(s):  
Speech Recognition ◽  
Markov Model ◽  
Hidden Markov ◽  
Call Centers ◽  
The Other ◽  
Language Models ◽  
Emergency Call ◽  
Acoustic Model ◽  
Different Types ◽  
Recognition Systems

In this paper, various methodologies of acoustic and language models, as well as labeling methods for automatic speech recognition for spoken dialogues in emergency call centers were investigated and comparatively analyzed. Because of the fact that dialogue speech in call centers has specific context and noisy, emotional environments, available speech recognition systems show poor performance. Therefore, in order to accurately recognize dialogue speeches, the main modules of speech recognition systems—language models and acoustic training methodologies—as well as symmetric data labeling approaches have been investigated and analyzed. To find an effective acoustic model for dialogue data, different types of Gaussian Mixture Model/Hidden Markov Model (GMM/HMM) and Deep Neural Network/Hidden Markov Model (DNN/HMM) methodologies were trained and compared. Additionally, effective language models for dialogue systems were defined based on extrinsic and intrinsic methods. Lastly, our suggested data labeling approaches with spelling correction are compared with common labeling methods resulting in outperforming the other methods with a notable percentage. Based on the results of the experiments, we determined that DNN/HMM for an acoustic model, trigram with Kneser–Ney discounting for a language model and using spelling correction before training data for a labeling method are effective configurations for dialogue speech recognition in emergency call centers. It should be noted that this research was conducted with two different types of datasets collected from emergency calls: the Dialogue dataset (27 h), which encapsulates call agents’ speech, and the Summary dataset (53 h), which contains voiced summaries of those dialogues describing emergency cases. Even though the speech taken from the emergency call center is in the Azerbaijani language, which belongs to the Turkic group of languages, our approaches are not tightly connected to specific language features. Hence, it is anticipated that suggested approaches can be applied to the other languages of the same group.

Plausibility and Aesthetic Interpretation

1977 ◽  
Vol 7 (2) ◽  
pp. 327-340 ◽  
Author(s):  
Denis Dutton
Keyword(s):  
Scientific Inquiry ◽  
The Other ◽  
Inquiry Science ◽  
Works Of Art ◽  
Different Types ◽  
Logical Structures ◽  
The One

If a catalogue were made of terms commonly used to affirm the adequacy of critical interpretations of works of art, one word certain to be included would be “plausible.” Yet this term is one which has received precious little attention in the literature of aesthetics. This is odd, inasmuch as I find the notion of plausibility central to an understanding of the nature of criticism. “Plausible” is a perplexing term because it can have radically different meanings depending on the circumstances of its employment. ln the following discussion, I will make some observations about the logic of this concept in connection with its uses in two rather different contexts: the context of scientific inquiry on the one hand, and that of aesthetic interpretation on the other. In distinguishing separate senses of “plausible,” I shall provide reason to resist the temptation to imagine that because logical aspects of two different types of inquiry—science and criticism—happen to be designated by the same term, they may to that extent be considered to have similar logical structures.

Comparison of two types of inocula during acclimation and stable operation for nitrophenol biodegradation in an anaerobic-aerobic SBR

2006 ◽  
Vol 54 (10) ◽  
pp. 39-45
Author(s):  
A. Vargas ◽  
D. González ◽  
A. Estival ◽  
G. Buitrón
Keyword(s):  
Wastewater Treatment ◽  
Treatment Plant ◽  
The Other ◽  
Stable Operation ◽  
Reaction Phase ◽  
Toxic Compound ◽  
Anaerobic Wastewater Treatment ◽  
Significant Difference ◽  
Different Types ◽  
Batch Bioreactors

This work presents a comparison of two inocula used for the acclimation of two anaerobic-aerobic sequencing batch bioreactors used for toxic wastewater treatment. The bioreactors were acclimated with different types of sludge: one coming from an anaerobic wastewater treatment plant and the other one from a conventional aerobic activated sludge plant. The model toxic compound was p-nitrophenol, which is reduced to p-aminophenol during the initial anaerobic phase of the reaction, and later mineralized during a posterior aerated reaction phase. Biodegradation of the compounds was monitored using UV/Vis spectrophotometry. After acclimation stabilization of the sludge and of the process was also monitored. Results show that there is no significant difference in acclimation times and stability of the process between the two employed inocula, and thus an originally anaerobic inoculum presents no apparent advantage over a more easily accessible aerobic one.

scholarly journals Escherichia coli O157:H7 SURVIVAL IN TRADITIONAL AND LOW LACTOSE YOGURT DURING FERMENTATION AND COOLING PERIODS

2017 ◽  
Vol 18 (0) ◽  
Author(s):  
Camila Sampaio Cutrim ◽  
Raphael Ferreira de Barros ◽  
Robson Maia Franco ◽  
Marco Antonio Sloboda Cortez
Keyword(s):  
Escherichia Coli ◽  
The Other ◽  
Lactose Hydrolysis ◽  
Escherichia Coli O157 ◽  
E Coli ◽  
Gas Formation ◽  
Whole Milk ◽  
Milk Contamination ◽  
Different Types ◽  
Fermentation Period

Abstract The purpose of this study was to evaluate the behavior of E. coli O157:H7 during lactose hydrolysis and fermentation of traditional and low lactose yogurt. It also aimed to verify E. coli O157:H7 survival after 12 h of storage at 4 ºC ±1 ºC. Two different types of yogurts were prepared, two with whole milk and two with pre-hydrolyzed whole milk; in both groups one yogurt was inoculated with E. coli O157:H7 and the other one was not inoculated. The survival of E. coli and pH of yogurt were determined during fermentation and after 12-h refrigeration. The results showed that E. coli O157:H7 was able to grow during the fermentation period (from 4.34 log CFU.mL-1 to 6.13 log CFU.mL-1 in traditional yogurt and 4.34 log CFU.mL-1 to 6.16 log CFU.mL-1 in low lactose yogurt). The samples with E. coli O157:H7 showed gas formation and syneresis. Thus, E. coli O157:H7 was able to survive and grow during fermentation of traditional and low lactose yogurts affecting the manufacture technology. Moreover, milk contamination by E. coli before LAB addition reduces the growth of L. bulgaricus and S. thermophilus especially when associated with reduction of lactose content.

Sign in / Sign up

Export Citation Format

Share Document