scholarly journals Digitalisasi Perangkat Ukur Tinggi dan Berat Badan Balita pada Posyandu Padasuka Kecamatan Cimahi Tengah, Jawa Bara

2021 ◽  
Vol 5 (1) ◽  
Author(s):  
Hertog Nugroho ◽  
Ferry Satria ◽  
Griffani Megiyanto ◽  
Rifa Hanifatunnisa ◽  
Maya Rahayu ◽  
...  
Keyword(s):  
Community Service ◽  
Data Storage ◽  
Data Loss ◽  
Height Measurement ◽  
Community Partners ◽  
Measurement Results ◽  
Record Data ◽  
Local Residents ◽  
Recorded Data ◽  
Two Parameters

Posyandu activities, which include measuring height and weight, have become a routine for monitoring the growth and development of toddlers. Height and weight are important parameters in toddler development related to the prevention of malnutrition that can lead to stunting and other possible disorders.In general, Posyandu activities, in Indonesia, especially posyandu RW 14 Padasuka, Cimahi Tengah sub-district, are still carried out conventionally using cards to record data. There are many problems with data loss among parents due to inadequate documentation and a lot of data storage at the Posyandu which makes recorded data difficult to find when the data is needed. Measurement of height and weight that still uses conventional scales operated by Posyandu officers also makes the measurement results for each child can be different.Through Community Service program, we proposed to develop and implement a weight and height measurement device based on Arduino and a website. Data from these two parameters can be displayed on a web page that can be accessed by parents of Posyandu participants. The development of the tool has been successfully realized and the test shows an error of 0.19% and 0.88% compared to the measurement of manual tools (rulers and scales).Training with Posyandu Padasuka community partners, Cimahi Tengah has been carried out on September 19, 2020 and was attended by several Posyandu volunteers and local residents. The training went well and the equipment was handed over so that it could be used properly.

scholarly journals Community Service-Learning: Why Can’t Canada Be More Like Mexico?

2018 ◽  
Vol 4 (1) ◽  
pp. 39-59
Author(s):  
Victoria Calvert ◽  
Halia Valladares Montemayor
Keyword(s):  
Service Learning ◽  
Community Service ◽  
Undergraduate Students ◽  
National Level ◽  
Community Service Learning ◽  
Community Partners ◽  
Canadian Universities ◽  
Post Secondary ◽  
Volunteer Programs ◽  
The Government

  In Mexico, the community service strategy and requirements for undergraduate students are both longstanding and mandated by the Mexican Constitution. Students undertake a minimum of 480 hours of service during their undergraduate degrees, which are coordinated through their universities’ Social Service (SS) departments. Many Canadian universities and colleges offer community service through courses and volunteer programs; however, the practice and adoption levels vary widely. Student involvement with community partners, as represented through community service-learning (CSL) and volunteerism in Canada, are sponsored by many post-secondary institutions but are not driven by a national agenda. While, in Mexico, community service is documented at a departmental and institutional level for reporting to stakeholders and the government, in Canada, documentation of community service varies with the institutional mandate and is often sporadic or non-existent; the imperative for systematic student engagement and citizenship development has not been recognized at the national level. This research paper provides an overview of the community engagement practices in both countries, with the national patterns represented through a summative review of selected Canadian and Mexican universities. Suggestions for processes and practices for Canada are proposed based upon the Mexican model.

scholarly journals PENGELOLAAN DATA REKAM MEDIS MELALUI SISTEM PENOMORAN DAN PENYIMPANAN UNTUK MENINGKATKAN MUTU PELAYANAN KESEHATAN DI KLINIK GIGI DAN UMUM PURI MEDICAL

2019 ◽  
Vol 3 (2) ◽  
pp. 135
Author(s):  
Rahmi Septia Sari
Keyword(s):  
Health Care ◽  
Medical Record ◽  
Community Service ◽  
Storage System ◽  
Patient Data ◽  
Health Care Facilities ◽  
Medical Record Data ◽  
Care Facilities ◽  
Record Data ◽  
And Storage

Pemeliharaan dan pengambilan data rekam medis merupakan fungsi penting dalam pelayanan disetiap fasilitas asuhan kesehatan. Peningkatan tuntutan akan informasi kesehatan ini mengharuskan fasilitas untuk memelihara sistem informasi yang efektif dan efisien. Mengenai sistem penomoran, penyimpanan dan retensi dari manajemen rekam medis di Indonesia banyak jenisnya. Bentuk sistem penomoran dan penyimpanan yang baik merupakan tahap awal dalam pemberian pelayanan terhadap pasien. Pengambilan dan penyimpanan rekam medis yang tepat merupakan elemen penting dalam pemberian pelayanan. Perlu kehati-hatian dalam merencanakan sistem penomoran dan penyimpanan. Tujuan utama dalam melakukan pemberian penomoran adalah mengidentifikasi data pasien. Penulis berpendapat bahwa dengan menggunakan bentuk pemberian nomor metode apapun rahasia pasien dapat terjaga. Pemberian nomor ini dilakukan pada saat pasien mendaftar atau kontak dengan sarana pelayanan kesehatan. Hal tujuan utama dalam melakukan pemberian penomoran adalah mengidentifikasi data pasien. Pemberian nomor dilakukan pada saat pasien mendaftar atau kontak dengan sarana pelayanan kesehatan. Dalam kegiatan ini kami berusaha untuk mengoptimalkan sistem pelayanan kesehatan  di Klinik Puri Medical melalui penyuluhan tentang sistem penomoran dan penyimpanan data Rekam Medis  yang baik dan memudahkan petugas dalam pengambilan dan penyimpanan data Rekam Medis tersebut. Pelaksanaan Pengabdian kepada masyarakat ini kami menguraikan tentang pengelolaan data Rekam medis melalui tatacara sistem penomoran dan penyimpanan data Rekam Medis. Metode yang dilakukan dengan cara memberikan materi dan dipresentasikan serta didiskusikan dengan staf yang hadir dalam Pengabdian tersebut dengan beberapa tahap, antara lain dengan pemaparan materi tentang sistem penomoran dan penyimpanan yang disampaikan kepada staf/petugas bagian Rekam medik yang hadir dalam acara Pengabdian Kepada Masyarakat, setelah itu dilanjutkan dengan praktik lapangan, jika ada hal yang kurang dipahami dalam pelaksanaan maka akan dilanjutkan dengan tahap bimbingan dan konsultasi antara staf rekam medis dengan tim Pengabdian Kepada Masyarakat,tahap akhir dalam jangka beberapa minggu akan dilakukan monitoring dan evaluasi apakah ilmu yang di berikan telah teraplikasi dengan baik di klinik tersebut. Kata kunci: Rekam Medis, Penomoran, Pengarsipan, Klinik ABSTRACT Corresponding author: * [email protected]   Maintenance and retrieval of medical record data is an important function of service in every health care facility. This increasing demand for health information requires facilities to maintain effective and efficient information systems. Regarding the numbering, storage and retention systems of medical record management in Indonesia, there are many types. The form of a good numbering and storage system is the initial stage in providing services to patients. Proper collection and storage of medical records is an important element in the delivery of services. Care needs to be taken in planning the numbering and storage system. The main purpose in numbering is to identify patient data. The author believes that by using any method of giving numbers the patient's secret can be kept. Giving this number is done when the patient registers or contacts with health care facilities. The main goal in making numbering is to identify patient data. The number is given when the patient registers or contacts with health care facilities. In this activity we are trying to optimize the health service system at Puri Medical Clinic through counseling about the numbering system and storing good Medical Record data and facilitate the officers in retrieving and storing the Medical Record data. This Community Service Implementation describes the management of medical record data through the procedure for numbering and storing medical record data. The method is done by providing material and presented and discussed with the staff present at the Service with several stages, including the presentation of material about the numbering and storage system that was delivered to the staff / officers of the Medical Record section who attended the Community Service event, after it is continued with field practice, if there are things that are not understood in the implementation it will be continued with the guidance and consultation phase between the medical record staff and the Community Service Team, the final stage within a period of several weeks will be carried out monitoring and evaluation whether the knowledge provided has been applied well in the clinic. Keywords: Medical Record, Numbering, Archiving, Clinic

Deteksi Pertumbuhan Bagi Siswa di TK ‘Aisyiyah Batik Pekajangan Kedungwuni Pekalongan

2021 ◽  
Vol 1 ◽  
pp. 1120-1127
Author(s):  
Neti Mustikawati ◽  
Dian Kartikasari
Keyword(s):  
Nutritional Status ◽  
Community Service ◽  
Health Workers ◽  
Direct Detection ◽  
Growth Monitoring ◽  
Upper Arm ◽  
Normal Category ◽  
Measurement Results ◽  
Service Activity ◽  
Nutritional Status Of Children

AbstractThe nutritional status of children is one of the important indicators in assessing the health status of children. Assessment of the nutritional status of children is done by monitoring the growth of children. Growth monitoring can be carried out by measuring weight (BB), body length (PB) for children under 24 months of age or height (TB) for children aged 24 months and over, and measuring head circumference (LK), added to the measurement of the upper arm circumference (LLA/LILA). Growth monitoring is carried out every 3 months for children aged 0 to 24 months, and every 6 months for children aged 30 to 72 months. TK ‘Aisyiyah Batik Pekajangan is an early childhood education school (PAUD) which has a total number of students around 71 children. The school has carried out weighing and measuring height and measuring the circumference of the child's upper arm at the end of each semester (6 months) which are carried out independently by the teacher. The school also has equipment facilities in the form of weight scales and height measurements as well as measuring tapes. However, what has been done is limited to measurements that are documented in a reporting record. This monitoring was not followed up with conclusions from the measurement results to determine the nutritional status of children, because the assistance provided by health workers from the health centers was not optimal. The purpose of this community service activity is to identify the nutritional status of children. The community service method is carried out by direct detection through the measurement of BB, TB, LK, and LILA. This activity was carried out for 2 days and was attended by 59 children. The results of the activity showed that most of the children (78%) were in the category of good nutritional status, 10% were undernourished, 7% were obese, and 5% were overnourished. LILA data obtained 100% of children in the normal category and for LK data it was found that most (90%) children were in the normal category and 10% of children were microcephaly. There is still a need for a re-assessment to ensure the child's condition and follow-up in the form of collaboration between the school, parents, and also related health facilities to carry out management for children who are still experiencing problems in growth.Keywords: growth detection, nutritional status,kindergartner AbstrakStatus gizi anak merupakan salah satu indikator penting dalam penilaian status kesehatan anak. Penilaian status gizi anak dilakukan dengan cara memantau pertumbuhan anak. Pemantauan pertumbuhan dapat dilakukan dengan cara melakukan pengukuran berat badan (BB), panjang badan (PB) bagi anak usia di bawah 24 bulan atau tinggi badan (TB) bagi anak usia 24 bulan keatas, dan pengukuran lingkar kepala (LK) serta bisa pula ditambahkan dengan pengukuranl ingkar lengan atas (LLA/LILA). Pemantuan pertumbuhan dilakukan setiap 3 bulan sekali bagi anak yang berusia 0 sampai 24 bulan, dan setiap 6 bulan sekali bagi anak yang berusia 30 sampai 72 bulan. TK ‘Aisyiyah Batik Pekajangan merupakan sebuah sekolah pendidikan anak usia dini (PAUD) yang memiliki jumlah total siswa 71 anak. Selama ini pihak sekolah sudah melakukan penimbangan berat badan dan pengukuran tinggi badan serta pengukuran lingkar lenganatas anak pada setiap akhir semester (6 bulan) yang dilakukan secara mandiri oleh guru. Sekolah juga telah memiliki fasilitas alat berupa timbangan berat badan dan pengukur tinggi badan serta pita ukur. Namun yang dilakukan baru sebatas pengukuran saja yang didokumentasikan dalam sebuah catatan pelaporan. Pemantauan ini tidak ditindak lanjuti dengan kesimpulan dari hasil pengukuran untuk menentukan status gizi anak, karena belum optimalnya pendampingan yang dilakukan oleh petugas kesehatan dari pihak Puskesmas terkait. Tujuan dari kegiatan pengabdian masyarakat ini adalah untuk mengidentifikasi status gizianak. Metode pengabdian masyarakat dilakukan dengan deteksi secara langsung melalui kegiatan pengukuran BB, TB, LK, dan LILA. Kegiatan ini dilakukan selama 2 hari dan diikuti oleh 59 anak. Hasil kegiatan didapatkan data bahwa sebagian besar (78%) anak termasuk dalam kategori status gizi baik, 10% anak gizi kurang, 7% anak obesitas, dan 5% gizi lebih. Data LILA didapatkan 100% anak dalam kategori normal dan untuk data LK didapatkan bahwa sebagian besar (90%) anak masuk dalam kategori normal dan 10% anak microcephaly. Masih diperlukan adanya assessment ulang untuk memastikan kondisi anak dan tindak lanjut berupa kerjasama antara pihak sekolah, orang tua, dan juga fasilitas Kesehatan terkait guna melakukan tata laksana bagi anak-anak yang masih mengalami masalah dalam pertumbuhan.Kata kunci: deteksi pertumbuhan, status gizi, anak TK

Reliability Model of Fault-Tolerant Dual-Disk Redundant Array

2016 ◽  
Vol 685 ◽  
pp. 805-810 ◽  
Author(s):  
P.A. Rahman ◽  
E.A. Muraveva ◽  
M.I. Sharipov
Keyword(s):  
Data Storage ◽  
Hardware Implementation ◽  
Fault Tolerant ◽  
Storage Systems ◽  
Reliable Data ◽  
Reliability Model ◽  
Data Loss ◽  
Reliability Parameters ◽  
Mean Time ◽  
Disk Failure

This paper deals with data storage systems based on fault-tolerant dual-disk RAID-1, which are widely used as high-reliable data storage systems and have acceptable overhead expenses in hardware implementation. Advanced reliability model of dual-disk RAID-1 array based on Markov chains, which takes into consideration finite time of disk replacement after disk failure, different disk failure rate in array’s normal and rebuild states, and probability of read errors during array rebuild procedure, are also overviewed in this paper. Mathematical solution of reliability model, calculation formula for mean time to data loss, estimation of disk and array reliability parameters and MTTDL calculation example are also provided.

scholarly journals Validation of Different Filters for Center of Pressure Measurements by a Cross-Section Study

Technologies ◽  
2019 ◽  
Vol 7 (4) ◽  
pp. 68 ◽  
Author(s):  
Koltermann ◽  
Gerber ◽  
Beck ◽  
Beck
Keyword(s):  
Data Storage ◽  
Quantitative Methods ◽  
Center Of Pressure ◽  
Reference Group ◽  
Dominant Frequency ◽  
Pressure Curve ◽  
Measurement Results ◽  
Sampling Duration ◽  
Foot Position ◽  
Postural Performance

The measurement of the center of pressure (CoP) is one of the most frequently used quantitative methods for quantifying postural performance. Due to the complexity and the high biological variability of the postural control loop, a large number of different methods and parameters have been established to describe the CoP process. Furthermore, the methodological conditions such as the foot position, visual condition, sampling duration, and the data processing also have a relevant influence on the measurement results. In addition, there are various methods for recording the pressure curve, which differ in particular with regard to the filters used, the frequencies, and measurement times. The aim of the present study was the methodical comparison between different digital filters, measurement frequencies and times, and their effects on the CoP process based on a healthy reference group. The data acquisition was done with LabVIEW and the data storage was organized in a subject oriented data structure. Based on the presented results it could be seen that with a different dominant frequency in the spectrum of the group of test persons, certain filter types are required for the processing of CoP data. In the sampling range from 300 Hz to 1 kHz in the bipedal stand and 600 Hz to 1 kHz in the monopedal stand, the choice of measurement frequency had no influence on the filter result.

Effects of Powders on the Precision of a Powder Metallurgy Helical Gear

2007 ◽  
Author(s):  
Ming-Ta Yu ◽  
Chung-Biau Tsay
Keyword(s):  
Mathematical Model ◽  
Powder Metallurgy ◽  
Helical Gear ◽  
Precision Measurements ◽  
Manufacture Process ◽  
Measurement Results ◽  
Surface Deviations ◽  
Two Parameters ◽  
The Mathematical Model ◽  
The Relationship

This study refers to the conditions of practical powder metallurgy manufacture process, and proceeds to experiments and gear precision measurements as well as investigation on the effects of two parameters, powders and pitch circle radius, on gear precision. The relationship between gear parameters and gear surface deviations was derived from the mathematical model of the involute helical gear and the analysis of gear surface deviations. In accordance with the measurement results of experiments, an ideal correction on the parameters of a forming die is obtained from the computer simulations of gear surface deviations.

Applied Anthropology and Community Service-Learning

2010 ◽  
Vol 32 (2) ◽  
pp. 21-25
Author(s):  
T. Barone ◽  
Beth Ritter
Keyword(s):  
Higher Education ◽  
Service Learning ◽  
Experiential Learning ◽  
Community Service ◽  
Applied Anthropology ◽  
Community Service Learning ◽  
Pedagogical Approach ◽  
Community Partners

Community Service-Learning (CSL) in higher education is a pedagogical approach embraced by many disciplines as a form of experiential learning that is rewarding for students, faculty and community partners. Although applied anthropology and CSL seem natural partners, applied anthropologists have published very little on CSL experiences. In this presentation of our experience, we argue that applied anthropologists should consider participating and publishing on CSL. We believe with a little preparation applied anthropologists are ready to jump into CSL, and that this will benefit their communities, their students, their careers and the discipline.

Recognition of Surface Roughness Based on Fractal Theory and the Microscopic Images

2012 ◽  
Vol 241-244 ◽  
pp. 3030-3033
Author(s):  
Zhen Zhen Guan ◽  
Ming Hui Ye ◽  
Xiao Chun Yin ◽  
Xiao He Luo
Keyword(s):  
Surface Roughness ◽  
Fractal Theory ◽  
Fractal Dimensions ◽  
Measurement Methods ◽  
Microscopic Images ◽  
Measuring Surface ◽  
Measurement Resolution ◽  
Measurement Results ◽  
Practical Engineering ◽  
Two Parameters

Values of surface roughness are usually unstable with conventional measurement methods because of the affection of measurement resolution and signal sampling, in order to make the measurement results reflect the practical engineering surface accurately, a new method of measuring surface roughness based on microscopic images and fractal theory is proposed. The microscopic images are acquired and pretreated, the structure function method is used to calculate the fractal dimension and fractal proportion coefficient, experiment results show that the fractal dimensions of tested samples with same making method are equal basically, while the fractal proportion coefficients are changed with different surface roughness, the two parameters can express the surface state preferably.

Sign in / Sign up

Export Citation Format

Share Document