scholarly journals Analysis of Production Efficiency Broiler Chicken Farm on Pattern Partnership of Contract Farming in Kampar District

2020 ◽  
Vol 3 (1) ◽  
pp. 60-70
Author(s):  
Elsyintia Dwi Putri ◽  
Cepriadi Cepriadi ◽  
Fajar Restuhadi
Keyword(s):  
Analytical Method ◽  
Broiler Chicken ◽  
Production Efficiency ◽  
Efficiency Analysis ◽  
Production Costs ◽  
Analysis Method ◽  
Contract Farming ◽  
Maximum Profit ◽  
Chicken Farm ◽  
Dea Method

Chicken broiler is the main commodities  and largest in Indonesia, where Kampar district into production centre in the province of Riau. According to the company's partners, breeder who partnered with the pattern contract farming hasn't been able to combine the use of livestock production facilities as well as labor. This resulted in not maximizing the profits obtained by breeders. The purpose of the research was to analyze broiler chicken farming and analyze the efficiency of broiler chicken production. Analytical method used is the analysis method of broiler chicken flocks and the DEA method. Respondents needed is 40 farmers who have partnered with the contract farming pattern. The results showed that the production costs of Rp.180.031.229 /period, revenue Rp.203.573.865/period, so that the profit amounting to Rp 23.542.636/period with R/C ratio of 1.13. The results of the efficiency analysis show that inefficient farmers are more numerous than those who have been efficient. It showed breeders hasn't been able to use the minimum input produce output that is optimal and maximum profit.

The Poultry Meat Production Technical Efficiency Analysis Model Based on Intelligent Devices

2015 ◽  
Vol 713-715 ◽  
pp. 2181-2184
Author(s):  
Xiang Jie Niu ◽  
Hua Li
Keyword(s):  
Neural Network ◽  
Production Efficiency ◽  
Rbf Neural Network ◽  
Efficiency Analysis ◽  
Poultry Meat ◽  
Meat Production ◽  
Analysis Method ◽  
Analysis Model ◽  
Neural Network Algorithm ◽  
Intelligent Devices

The paper focuses on the poultry meat production efficiency analysis methods. In the poultry meat production procedure, the randomness is strong due to the various complex factors in the poultry meat production which will reduce the production efficiency. In order to avoid the defects of the traditional algorithms, the paper proposes the poultry meat production efficiency analysis method based on RBF neural network algorithm. The effect factors in the poultry meat production will be sifted as the basic data for production efficiency analysis. The RBF neural network model is built and the output results are used to analyze the poultry meat production efficiency with intelligent devices. The experiment results illustrate the improved algorithm can increase the poultry meat production efficiency.

scholarly journals Methods of Measuring the Efficiency of Commercial Banks: an Example of Polish Banks

Ekonomika ◽  
2008 ◽  
Vol 84 ◽  
Author(s):  
Grazyna Wozniewska
Keyword(s):  
Commercial Banks ◽  
Balance Sheet ◽  
Efficiency Analysis ◽  
Data Envelopment ◽  
Financial Indicators ◽  
Analysis Method ◽  
Bank Efficiency ◽  
Efficiency Measures ◽  
Dea Method ◽  
Non Parametric

Efficiency analysis is essential for the evaluation of banks’ performance. To estimate banks’ efficiency, we can apply different methods. Analysis of financial indicators is the most popular efficiency analysis method in banks, but the number of financial indicators can be really big and make the interpretation of the results more difficult. Another way to estimate efficiency measures is the nonparametric frontier method - Data Envelopment Analysis (DEA). This method has become increasingly popular in measuring bank efficiency in the countries with developed banking systems.The main aim of this article is to present the results of efficiency analysis, computed by means of both methods, i. e. the classical index of balance sheet characteristics and the non-parametric DEA method.The analysis was carried out in the biggest banks operating in Poland in 2000-2007. The empirical results show that the efficiency measures give a similar although not identical picture of Polish commercial banks’ performance. These results (yielded by both methods) are complementary to each other and suggest that the non-parametric DEA method is really valuable and worth applying in bank practice.The work presents also the reasons that would explain the achieved results. It also compares both methods, their potentials and limitations in applying them to banking.

scholarly journals ANALISIS MEKANISME KERJA SAMA USAHA AYAM POTONG MENURUT TINJAUAN EKONOMI ISLAM

2019 ◽  
Vol 3 (1) ◽  
pp. 190-205
Author(s):  
Nova Haryani ◽  
Ismaulina Ismaulina ◽  
Nurul A'la
Keyword(s):  
Data Analysis ◽  
Broiler Chicken ◽  
Secondary Data ◽  
Primary Data ◽  
Business Owner ◽  
Analysis Method ◽  
Data Presentation ◽  
Collection Data ◽  
Chicken Farm ◽  
Descriptive Qualitative

This study aims to determine the mechanism of cooperation between the business of broiler chicken in Blang Raleue Village, Simpang Kramat Subdistrict. Overview of the Islamic Economy on the mechanism of cooperation between the business of the three-broiler chicken in Blang Raleue Village, Simpang Kramat Sub-district. This research is a descriptive qualitative study. To obtain data the author uses observation and interview techniques. The type of data used is primary data obtained directly from the business owner of the three-piece broiler chicken in Blang Raleue Village, Simpang Kramat District. Secondary data obtained from notes, books, journals and others related to the problems that the authors examine. The data analysis method used is descriptive qualitative, namely data collection, data presentation, and conclusion drawing. The results of this study indicate that the contents of the cooperation contract in the three-broiler chicken farm in the Blang Raleue Village of Simpang Kramat Subdistrict have not fully complied with the syirkah concept. But there are also some contents of the cooperation contract that are in accordance with the concept of syirkah.

PROFITABILITAS USAHA PETERNAKAN AYAM BROILER DENGAN TIPE KANDANG YANG BERBEDA

2020 ◽  
Vol 2 (1) ◽  
Author(s):  
Nurul Mukminah ◽  
Rita Purwasih
Keyword(s):  
Economic Analysis ◽  
Production Cost ◽  
Broiler Chicken ◽  
Production Costs ◽  
Different Types

This study aims to determine and compare the profitability of different types of broiler chicken farms (open and cloused houses) in Subang Regency. This study involved 9 farmers consisting of 5 farmers with closed house and 4 farmers with open house who partnered with PT. Surya Unggas Mandiri (PT. SUM). Production costs taken are 2 production periods from May-August 2018. Data are analyzed using economic analysis and descriptive methods. The results showed that the production cost per period per 1000 birds closed house was higher (Rp. 27.656.768,-) compared to open house (Rp. 24.975.671,-). The revenue per period per 1000 birds of closed house is higher (Rp. 30.606.931,-) compared to open house (Rp. 25.788.618,-). The profit of farmers who use closed house is higher (Rp. 2.621/period/bird) than open house (Rp.417,-). The profitability in close house s is 9.48% and is very feasible to develop

THE USE OF LINEAR PROGRAMMING TECHNIQUES TO OPTIMIZE FARM SIZE

2019 ◽  
pp. 93-100
Author(s):  
T. Movchan ◽  
V. Artеmov ◽  
D. Bulysheva
Keyword(s):  
Land Use ◽  
Linear Programming ◽  
Deep Understanding ◽  
Minimum Cost ◽  
Production Costs ◽  
Farm Size ◽  
Analysis Method ◽  
Microsoft Excel ◽  
Management Activity ◽  
Economic Zones

It is recommended to implement forecasting management models in the area of land use and protection by applying linear programming methods to optimize the size of farms, which land is located in different natural and economic zones. Analysis and assessment of land use in natural-economic zones is a type of management activity for deep understanding of the dialectic of a managed object development and true assessment of its moving forces. This enables to simulate the situation of land use, to identify a specific goal, to choose the means to achieve it and to obtain the optimum result. The implementation of the proposed forecast models of the optimal farm size is carried out by linear programming in three ways (northwest corner method, minimum cost method and What-If analysis method, that uses Solver, a Microsoft Excel add-in program). The implementation of the above approaches is based on the example of four farms and five natural-economic zones. The obtained solutions show that the best result is attained by using Solver for What-If analysis method, a Microsoft Excel add-in program. The northwest corner method gives the worst result, but this is the simplest solution. The minimum cost method depends on the researcher qualification and produces the result that is most often found between the results obtained by the northwest corner method and the "Solver" procedure. When using the method of the northwest corner a program of consideration of different options for the distribution of land resources and the choice of the optimal solution was developed. This allows to find an optimal result of land allocation according to the result, which is similar to the result of the procedure "Solver", but it is more adapted for the direct participation of the researcher in the process of solving problems. There is an opportunity to improve the result by changing the original data, which simulates the forecast of the distribution of farm land in natural-economic zones, while minimizing production costs. In the absence of access to computers, the solutions obtained by the northwest corner and the minimum cost methods can be improved by the potential method.

Predicting the number of fiber roots in lola drafting based on multi-field coupling

2020 ◽  
Vol 90 (23-24) ◽  
pp. 2769-2781
Author(s):  
Xin rong Li ◽  
LiuBo Wu ◽  
Zhaoning Bu ◽  
Lidong Liu
Keyword(s):  
Change Point ◽  
Production Efficiency ◽  
Slip Rate ◽  
Sharp Decrease ◽  
Coupling Model ◽  
Production Costs ◽  
Weak Effect ◽  
Field Coupling ◽  
Theoretical Support ◽  
New Type

Pullout theory is very important in improving efficiency, quality, and production costs. Because production efficiency is too low for mechanical drafting equipment, a simple multi-field coupling model of fiber mechanics based on conserving momentum is proposed that considers the distribution of the fiber speed point, slip rate, and friction mechanics. When the roller draft multiple is increased, the position near the rear roller clamp mouth in the draft area will show a sharp decrease of fiber, which is caused by the rapid movement of the front fiber to drive the floating fiber movement, and it is also the existence of the fiber change point. When the roller spacing increases, the draft efficiency decreases, although the pressure applied by the roller to the fibrous strip has a weak effect on the draft efficiency. This research increases our understanding of drawing and provides theoretical support for the design of a new type of drawing.

Cooling Process for Directional Solidification in Directed Energy Deposition

2018 ◽  
Author(s):  
Keiya Ishiyama ◽  
Ryo Koike ◽  
Yasuhiro Kakinuma ◽  
Tetsuya Suzuki ◽  
Takanori Mori
Keyword(s):  
Directional Solidification ◽  
Thermal Gradient ◽  
Large Scale ◽  
Energy Deposition ◽  
Production Efficiency ◽  
Production Costs ◽  
Special Structure ◽  
Mechanical Stiffness ◽  
Directed Energy Deposition ◽  
Directed Energy

Additive manufacturing (AM) for metals has attracted attention from industry because of its great potential to enhance production efficiency and reduce production costs. Directed energy deposition (DED) is a metal AM process suitable to produce large-scale freeform metal products. DED entails irradiating the baseplate with a laser beam and launching the metal powder onto the molten spot to produce a metal part on the baseplate. Because the process enables powder from different materials to be used, DED is widely applicable to valuable production work such as for a dissimilar material joint, a graded material, or a part with a special structure. With regard to parts with a special structure, directional solidification can prospectively be used in the power plant and aerospace industries because it can enhance the stiffness in a specific direction via only a simple process. However, conventional approaches for directional solidification require a special mold in order to realize a long-lasting thermal gradient in the part. On the other hand, from the viewpoint of thermal distribution in a produced part, DED is able to control the gradient by controlling the position of the molten pool, i.e., the position of the laser spot. Moreover, unlike casting, the thermal gradient can be precisely oriented in the expected direction, because the laser supplies heat energy on the regulated spot. In this study, the applicability of DED to directional solidification in Inconel® 625 is theoretically and experimentally evaluated through metal structure observation and Vickers hardness measurements. Furthermore, the effect of two different cooling processes on directional solidification is also considered with the aim of improving the mechanical stiffness of a part produced by DED. The observations and experimental results show that both the cooling methods (baseplate cooling and intermittent treatment with coolant) are able to enhance the hardness while retaining the anisotropy.

Sign in / Sign up

Export Citation Format

Share Document