scholarly journals Sistem Pendukung Keputusan Pemberian Bantuan Kepada Keluarga Kurang Mampu Menggunakan Metode AHP

2021 ◽  
Vol 4 (1) ◽  
pp. 32-37
Author(s):  
Bobby Gersonta Ginting ◽  
Fricles A Sianturi

Poverty is a problem that is still faced by several countries in the world, especially in Indonesia. Poverty is a condition / condition of the inability of individuals / groups of people to meet the necessities of life, both physical and economic conditions. The system of providing assistance carried out by the Social Service of North Sumatra Province uses the Analytical Hierarchy Process method. The method used in this aid system is the Analytical Hierarchy Process method in the Social Service of North Sumatra Province. The results of the weighted assumptions for each criterion are relative in nature. The criteria used in determining the receipt of assistance are job criteria, income criteria, nutritional consumption criteria (chicken, meat, milk), criteria for sources of information, criteria for medical ability, criteria for the last education of the head of the family. The method used in this research is the AHP method. AHP method is one of the methods used in the Decision Support System to determine the provision of this assistance is the Analytical Hierarchy Process (AHP). After getting the consistency index value, then look for the consistency ratio value (CR) by dividing the consistency index by the consistency random index (RI), namely CR = C1 / R1 CR = 0.09975 / 1.24 = 0.0891, the requirement for consistency CR <0.1 then the CR value that is obtained from the comparison above it is consistent.

2019 ◽  
Vol 11 (01) ◽  
pp. 35-45
Author(s):  
Rizaldy Khair

Loans for civil servants and police employees must be given to employees who are entitled to receive them. Lending without any criteria makes other employees not accept them. Lending using criteria ensures that the employee given the loan is an employee who deserves to receive it. The ahp method is able to complete the selection of employees who are eligible for the loan. Because of the criteria that can determine the weight value for each attribute, and then proceed with a ranking process that will select the best alternative from a number of alternatives. In this case, the alternative in question is the one who is entitled to receive a loan based on attributes, or determining criteria in selecting employees who are eligible to receive loans. Based on the ranking, Juliana Situmorang's employee has the highest score of 0.977 compared to other employees. The ahp method is the right step in determining employees who are eligible to receive loans.


Author(s):  
Yunandar Yunandar ◽  
Hefni Effendi ◽  
Widiatmaka Widiatmaka ◽  
Yudi Setiawan

The cultivation of Alabio ducks (Anas Platyrynchos Borneo) so far is still natural and only involves one parameter; furthermore, each location has different characteristics. The hierarchical structure constructed has a ranking of importance as an alternative option for ducks' development in peatland ecosystems. This research aims to formulate a strategy for duck production in the Hulu Sungai Utara Regency. AHP (Analytical Hierarchy Process) method in this study is used to structure the decision-making flow from goals and alternatives and weigh the variables. Data collection was carried out with duck farming experts from academia, farmer groups, and policymakers. This study found that the availability of feed, both sago (0.254) and bran (0.218), is a significant component from an ecological perspective. Distance to market (0.307) and hatchery location (0.287) is an economic variable. The social part consists of distance from the settlement (0.443) and labor availability (0.247). Meanwhile, the availability of feed (0.282), hatchery technology (0.269), and Mina ducks (0.251) are the development strategies for duck cultivation in swamp areas, and economic stimulus (0.93) is the final contributor.


2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Mochammad Sobandi Dwi Putra ◽  
Septi Andryana ◽  
Fauziah ◽  
Aris Gunaryati

The selection of quality gemstones requires a special ability to select and assess the quality of gemstones to be traded. The diversity of types of gemstones and consumers becomes an obstacle in itself when the knowledge and ability of individuals to analyze the quality of gemstones is minimal. The decision-making method used is Fuzzy Analytical Hierarchy Process (F-AHP) method which is widely used in various sectors. F-AHP is easy to adapt to many decision issues; the research proposes a decision-making system using the F-AHP algorithm to analyze the quality of gemstones. The results obtained with the use of F-AHP model in the selection of quality gemstones show the highest quality of gemstones of all stones compared, Rubi 1, with a weight value of 0.152942.


2021 ◽  
Vol 5 (2) ◽  
pp. 149-160
Author(s):  
Nehemia Hadiwijaya ◽  
Jenie Sundari

Abstract-Supplier selection is one of the important things in purchasing activities for companies. Supplier selection is a multi-criteria problem which includes quantitative and qualitative factors. One method that can be used for supplier selection is the AHP (Analytical Hierarchy Process) method. The problems that will be discussed in this study are: (1) how is the order of priority criteria and sub-criteria in the selection of suppliers at PT Garuda Hidrotive International? (2) which supplier / supplier should PT Garuda Hidrotive International choose based on the AHP method? The sampling technique uses judgment sampling because the AHP method requires dependence on a group of experts according to the types of specialists involved in decision making. Based on the results of the analysis, the advice that can be given is, if the company will develop a partnership with suppliers, the company is preferred to choose supplier X as a supplier food chemical for the company because supplier X is the best supplier that has the highest overall value. With this partnership, the supply chain performance between suppliers and companies will be better and can facilitate the overall production activities. 


2019 ◽  
Vol 3 (1) ◽  
pp. 1-9
Author(s):  
Dimas Novrisal ◽  
Farah Almira ◽  
Eva Febrianty

Company is required to compete and being innovated to carry out work program strategies in order to improve the service quality while deliver goods to consumers. Due to limited resources, companies need to prioritize work programs based on existing criteria. The purpose of this study is the selection of work program priorities using the analytical hierarchy process method at PT. Garuda Indonesia Cargo. This research begins with determining the criteria and alternatives that are carried out for making questionnaires, then distributing questionnaires to get priority criteria and alternatives using the AHP method. The results of data processing using the Analytical Hierarchy Process (AHP) method obtained the sequence results from each of the highest to lowest criteria and the highest weighted results were the quality criteria with the final weight value 0.71 after that followed the profit criteria with the final weight 0.29. After obtained the heightened criteria, the optimal alternative selected is Equipment with a weight value of 0.46, and followed by HR with a weight value of 0.38, then Infrastructure with a final weight value of 0.16.


Author(s):  
E. Tazik ◽  
Z. Jahantab ◽  
M. Bakhtiari ◽  
A. Rezaei ◽  
S. Kazem Alavipanah

Landslides are among the most important natural hazards that lead to modification of the environment. Therefore, studying of this phenomenon is so important in many areas. Because of the climate conditions, geologic, and geomorphologic characteristics of the region, the purpose of this study was landslide hazard assessment using Fuzzy Logic, frequency ratio and Analytical Hierarchy Process method in Dozein basin, Iran. At first, landslides occurred in Dozein basin were identified using aerial photos and field studies. The influenced landslide parameters that were used in this study including slope, aspect, elevation, lithology, precipitation, land cover, distance from fault, distance from road and distance from river were obtained from different sources and maps. Using these factors and the identified landslide, the fuzzy membership values were calculated by frequency ratio. Then to account for the importance of each of the factors in the landslide susceptibility, weights of each factor were determined based on questionnaire and AHP method. Finally, fuzzy map of each factor was multiplied to its weight that obtained using AHP method. At the end, for computing prediction accuracy, the produced map was verified by comparing to existing landslide locations. These results indicate that the <b>combining the three methods</b> Fuzzy Logic, Frequency Ratio and Analytical Hierarchy Process method are relatively good estimators of landslide susceptibility in the study area. According to landslide susceptibility map about 51% of the occurred landslide fall into the high and very high susceptibility zones of the landslide susceptibility map, but approximately 26 % of them indeed located in the low and very low susceptibility zones.


Author(s):  
Irfan Muhamad Ramadon ◽  
Erry Rimawan ◽  
Rini Kristianti ◽  
Suryadi .

The development of a nation is inseparable from the factors / roles of industry both in services and manufacturing. This is because of manufacturing and service industries are very profitable fields by various parties. The problem at PT ABC related to the procurement sector is that there are no methods for making decisions when there are many criteria and many decision makers. This affects when PT. ABC wants to buy a Rubber Dumper XP500-R as a safety unit, based on this problem the most appropriate method is Analytical Hierarchy Process. AHP method applied by the Expert Choice (EC) software can help choose the right supplier. AHP is used because it can calculate priority assesments for many criteria and many decision makers. The results of this priority assesments are CV Rafindo Raya (0.36570) as the first rank followed by CV Rekatama Tehnik (0.23320) as second, PT Dharma Geliat Sejahtera as rthird (0.22170), and the last is PT Emka Jaya Mandiri (0 , 18002).


Author(s):  
Gede Adi Aryanata ◽  
Putu Suta Adya Dharma Rahadi ◽  
Yanu Prapto Sudarmojo

This research discuss about how to predict a match result by using data mining as the foundation to make a conclusion. In this research, Analytical Hierarchy Process (AHP) is used as a main data mining method for making a prediction. AHP works by using pre-existing data events as training data to obtain predictions of future data results. This research uses four parameters to predict the result of international Dota 2 match. Those parameters are experience per minutes (XPM) and gold per minutes (GPM), matchmaking ratio (MMR) point, 3 head to head matches result, and the last 10 results matches. In its implementation, the four parameters are given different rules and priority levels to support the performance of the AHP method. The result of this study has a satisfactory level of accuracy regarding the victory estimation of the match.


2020 ◽  
Vol 16 (1) ◽  
pp. 45-52
Author(s):  
Dinar Ajeng Kristiyanti ◽  
Garth Wishnuwardhana Pangemanan

To determine the best Judo athlete, Rajawali Judo Club of Battalion Arhanud 1 Divif 1 Kostrad has several obstacles such as making a decision in determining the best Judo athlete by the Coach and the Achievement Development which only based on experience which is estimated without the existence of any system. This results in subjectivity and the absence of a strong basis for competent objective decision making which then triggers gaps between athletes. The absence of specific criteria creates that result in not targeting the selection of the best Judo athletes. For this reason, a method, in this case, is needed to choose the AHP (Analytical Hierarchy Process) method and a number of criteria as indicators in determining the best Judo athlete. While the referenced criteria are Self-Dropping Technique (Ukemi), Slamming Technique (Nage-waza), Lockdown or Lying Technique (Katame-waza), Discipline and Achievement. The purpose of this study is expected to produce statistical data as an evaluation material for the training team to minimize or even eliminate the gap between fellow Judo athletes at the Rajawali Judo Club of Battalion Arhanud 1 Divif 1 Kostrad. The result of this study is based on Analytical Hierarchy Process calculations, obtained the most important priority criteria in determining the best Judo athlete in which the Achievement criteria with value  0.325 or equivalent to 32%, then followed by Disciplinary criteria with value 0.227 or equivalent to 23%, Slamming Technique criteria (Nage-waza) with value 0.211 or equivalent to 21%, Lockdown/Laying Technique criteria (Katame-waza) with value 0.125 or equivalent to 12% and in the last rank the Self-Dropping Technique criteria (Ukemi) with value 0.112 or equivalent to 11%.


Author(s):  
Adhika Pramita Widyassari ◽  
Teguh Yuwono

  Strategies to buy a house, consumers often experience problems in determining the house to be purchased, because each house has different characteristics. These characteristics will be used as reference considerations in determining which house to buy. In this study, the AHP (Analytical Hierarchy Process) method was used to weight the criteria and test the level of consistency with the pairwise comparison matrix. If the matrix has been consistent, then it can be continued to rank to determine the chosen alternative by using input weighting criteria obtained from the AHP method. To overcome the above problems, it is necessary to build a decision support system by implementing a ranking that can make it easier to determine House Selection using the AHP (Analytical Hierarchy Process) method. Of the 9 sample houses in the Cepu area, the highest was the Housing of Zam Zam Cepu Type 38/78 with a total value of 2,84564719.


Sign in / Sign up

Export Citation Format

Share Document