scholarly journals Suitability of Teak Log Quality from Gunung Kidul and Bantul Yogyakarta Community Forest for Export Meubel Purpose

2021 ◽  
Vol 4 (02) ◽  
pp. 78-86
Author(s):  
Sushardi Mastap ◽  
Tibertius Agus Prayitno ◽  
Yustinus Suranto ◽  
Ganis Lukmandaru
Keyword(s):  
Wood Quality ◽  
Raw Material ◽  
Stand Age ◽  
Community Forest ◽  
Tukey Test ◽  
Age Class ◽  
Teak Wood

Natural defect or poor log quality are common in community teak forests. Furniture manufacturers typically use these log types for export purposes. The aim of this study is to determine the effect of community teak forest location and teak stand age affect on teak wood quality. Three teak forest locations were Bantul and two locations in Gunung Kidul. The teak stand age class namely 6, 8, and 10 years old. The data was analyzed using SPSS 20.0 with Tukey test. The result showed that brittleness defect, sapwood defect, and different wooden knot defects were significant in all locations, while log straightness defect was found only in Dlingo. Similarly, all teak stand age (6, 8, and 10 years old) also produced the same defects such as brittleness defect, sapwood defect, and wood knot defect, while the straightness defect at the age of 10 years old was different from to other two teak stand age (6 and 8-year-old). Average teak log defects were straightness defect 1.87-3.53%, brittleness defect 1.19–6.21%, sapwood defect 1.49-4.82 cm, and wood knot defect 5.10-11.46 cm. However, the teak log quality still met the SNI 7534.2-2010 and 7535.2-2010 as raw material for exporting furniture.

scholarly journals Epiphytic lichens as indicator of land-use pattern and forest harvesting in a community forest in west Nepal

2012 ◽  
Vol 8 ◽  
pp. 24-32 ◽  
Author(s):  
Pramod Nag ◽  
Himanshu Rai ◽  
Dalip Kumar Upreti ◽  
Sanjeeva Nayaka ◽  
Rajan Kumar Gupta
Keyword(s):  
Land Use ◽  
Forest Harvesting ◽  
Conservation Strategy ◽  
Stand Age ◽  
Epiphytic Lichens ◽  
Community Forest ◽  
Land Use Pattern ◽  
Community Based ◽  
Lichen Diversity ◽  
Use Pattern

Human inhabitance and agriculture have fundamentally altered global pattern of biodiversity and ecosystem processes. Therefore, integration of community-based approach is an effective conservation strategy. Community forestry is an important community-based approach, which can help in conserving local ecological assets in a sustainable manner. Lichens are known to be more sensitive indicators of ecosystem functions and disturbances than any other cryptogam and vascular plant community. Present study reports a preliminary assessment of epiphytic lichens in a community forest in Dadeldhura district, west Nepal, in order to identify potential indicator of forest health and land-use pattern. Epiphytic (corticolous) lichens were sampled from ten land-use units (LUU), using narrow frequency grids of 10 cm × 50 cm, each divided into five sampling units of 10 cm × 10 cm, on the bark of selected tree species. Quercus leucotrichophora was the dominant phorophyte followed by Pinus roxburghii, Rhododendron arboreum and Myrica esculenta. Foliose parmeloid (Parmotrema spp., Heterodermia spp., Hypotrachyna spp., Bulbothrix spp., Canoparmelia spp., Canomaculina spp.) was the most abundant lichen group, found inhabiting all the phorophytes followed by crustose, fruticose and dimorphic growth forms. Maximum diversity of parmeloid lichens was recorded on older stand of Quercus while younger stands usually harbored crustose lichens (e.g., Lecanora spp., Basidia spp.). Though the lichen diversity increased from outer fringes of the forest to the core, the vegetation stand age was not distributed in any consistent pattern suggesting unconstrained harvesting of the forest. Lichen diversity was found constrained by phorophyte determinants (stand age, aspect, and bark properties) and community harvesting of the forest.doi: http://dx.doi.org/10.3126/botor.v8i0.5555 Botanica Orientalis – Journal of Plant Science (2011) 8: 24-32

scholarly journals Evaluation of the Starch Quantification Methods of Musa paradisiaca, Manihot esculenta, and Dioscorea trífida Using Factorial Experiments

2018 ◽  
Vol 2018 ◽  
pp. 1-7
Author(s):  
J. J. Lafont-Mendoza ◽  
C. A. Severiche-Sierra ◽  
J. Jaimes-Morales
Keyword(s):  
Manihot Esculenta ◽  
Extraction Method ◽  
Area Under The Curve ◽  
Raw Material ◽  
Factorial Experiments ◽  
Average Percentage ◽  
Musa Paradisiaca ◽  
Tukey Test ◽  
Vis Spectroscopy ◽  
Two Factors

Background. Starch and its products are used in a variety of ways for both the food and nonfood industries. A factorial experiment is carried out with two factors to explain the behavior of the percentage of starch, where the factors correspond to the extraction method and to the raw material. Method. Three methods were used in triplicate: the first followed the official technique of the Association of Official Analytical Chemists (AOAC), to perform acid hydrolysis and quantification of starch by Titulation; the second method involved the colorful reaction with iodine using the UV equipment to measure the absorbance and calculate the percentage of starch; as a third method the FTIR was used, through which the concentration of the starch was calculated by the area under the curve obtained from the spectrum. Results. there is an effect of both the method and the raw material on the percentage of starch, while there was no effect of the interaction; the Tukey test indicates that the highest average percentage of extraction occurs with the extraction method by Titulation and with the starch of Manihot esculenta. Conclusion. It is used as raw material. The method of quantification of starch by UV-VIS spectroscopy was the best for the study samples because it presented less deviation in relation to the FTIR and Titulation methods.

scholarly journals pH of exudate test in the physiological quality of crambe seeds

2016 ◽  
Vol 46 (6) ◽  
pp. 1014-1018 ◽  
Author(s):  
Charline Zaratin Alves ◽  
Lennis Afraire Rodrigues ◽  
Carlos Henrique Queiroz Rego ◽  
Josué Bispo da Silva
Keyword(s):  
Pearson Correlation ◽  
Raw Material ◽  
Mean Values ◽  
Tukey Test ◽  
Physiological Quality ◽  
The Subject ◽  
The Mean ◽  
C 30

ABSTRACT: Crambe is a rapeseed with high oil content and can be used as a winter cover or as a source of raw material for the production of biodiesel, however espite the growing interest in the culture, research on the subject is still incipient, especially concerning the seed production and analysis technology. The purpose of this study is to evaluate the physiological quality of crambe seeds, 'FMS Brilhante' cultivar, by testing the pH of exudate. Five seed lots were submitted to the determination of water content and the tests of germination and vigor (first count, emergence and tetrazolium). In the conduction of pH exudate test, temperatures (25 and 30oC), and periods of seed imbibition in water (15, 30 and 45 minutes) were tested. The experiment was conducted in a completely randomized manner, with four replicates, and the mean values were compared by the Tukey test at 5% probability; Pearson correlation between the pH of the exudate and initial tests was also made. Testing the pH of exudate is promising for separating lots of crambe seeds and the following combinations of 25°C/30 minutes or 30°C/45 minutes can be used.

scholarly journals Slenderness of trees in black locust stands

2018 ◽  
Vol 79 (2) ◽  
pp. 113-117
Author(s):  
Szymon Bijak ◽  
Katarzyna Orzoł
Keyword(s):  
Standard Deviation ◽  
Black Locust ◽  
Robinia Pseudoacacia ◽  
Habitat Type ◽  
Stand Age ◽  
Age Classes ◽  
Breast Height ◽  
Age Class ◽  
Crown Length ◽  
Research Material

Abstract This paper investigates the slenderness of black locust (Robinia pseudoacacia) trees in relation to the biosocial status of the trees, stand age class, crown parameters and habitat type. The research material was collected on 35 research plots in the Sława Śląska, Sulechów and Głogów forest districts in western Poland and comprises 1058 trees. For each tree, we measured height (h) as well as diameter at breast height (d) and determined its biosocial status (Kraft class), crown length (CL) and relative crown length (rCL). The age class and habitat type were assessed at the plot level. Because the obtained values for slenderness (s=h/d) diverged significantly from the normal distribution, we used Kruskal-Wallis and Mann-Whitney tests to investigate the influence of the above-mentioned parameters on the h/d ratio. Black locust slenderness ranged from 0.31 to 1.95 with an average of 0.91 (standard deviation 0.24). It furthermore differed significantly between Kraft classes (the higher the biosocial status, the lower the slenderness) and age classes (the older the trees, the lower their slenderness). We also found a significant effect of the habitat type (in oligotrophic sites trees formed more slender trunks than in mesotrophic sites) and crown parameters on the h/d ratio (decreasing with increasing crown length and relative crown length). The obtained results suggest that the slenderness of black locust does not differ substantially from native broadleaved trees in Poland.

scholarly journals Structural products made of beech wood: quality assessment of the raw material

2020 ◽  
Vol 78 (5) ◽  
pp. 961-970
Author(s):  
Michele Brunetti ◽  
Michela Nocetti ◽  
Benedetto Pizzo ◽  
Giovanni Aminti ◽  
Corrado Cremonini ◽  
...  
Keyword(s):  
Quality Assessment ◽  
Wood Quality ◽  
Beech Wood ◽  
Raw Material

Raw material factors affecting the quota of structural wood in sawmill production

2019 ◽  
Vol 107 ◽  
pp. 124-130
Author(s):  
MAREK WIERUSZEWSKI ◽  
RADOSŁAW MIRSKI ◽  
ADRIAN TROCIŃSKI
Keyword(s):  
Raw Materials ◽  
Wood Quality ◽  
Strength Properties ◽  
Solid Wood ◽  
Wood Products ◽  
Raw Material ◽  
Factors Affecting ◽  
Research Technology ◽  
Main Indicator ◽  
Round Wood

Construction wood has to meet high requirements for loads capacity. Thanks to the selection and adequate classification of raw materials it is possible to decide how specific wood products can and should be used. The usage of solid wood for structural elements purposes has been precisely classified and specified in standardized requirements. Twelve classes of structural timber, ranging from C14 to C50, have been identified for softwood. Only part of Polish raw wood meets the standards of strength classes required in the building industry, as its strength corresponds to classes C24 and C30. A conclusion from research on the assortment structure of the raw materials in Poland was formed that it is particularly important to sort wood effectively according to its quality and intended use during processing. The material and strength efficiency is the main indicator of rational use of wood. The research resulted in setting the initial classification limits of selected round wood groups according to its strength. Properties determining the possibilities of obtaining a high quality product from the available raw wood material were taken into account in the research. Crucial factor was to select the proper research technology of determining dependencies between the applied research methodology and the defined wood quality, sorting class and strength class. The lower limit of availability of raw material with appropriate technical characteristics is determined during the selection of the research formula.

GENETIC IMPROVEMENT OF FIBER LENGTH AND COARSENESS BASED ON PAPER PRODUCT PERFORMANCE AND MATERIAL VARIABILITY – A REVIEW

IAWA Journal ◽  
2004 ◽  
Vol 25 (4) ◽  
pp. 401-414 ◽  
Author(s):  
Brian K. Via ◽  
Michael Stine ◽  
Todd F. Shupe ◽  
Chi-Leung So ◽  
Leslie Groom
Keyword(s):  
Specific Gravity ◽  
Wood Quality ◽  
Product Performance ◽  
Raw Material ◽  
Pulp Yield ◽  
Quality Trait ◽  
Paper Strength ◽  
Improvement Program ◽  
Tracheid Length ◽  
Strength And Stiffness

Improvement of specific gravity through tree breeding was an early choice made in the mid 20th century due to its ease of measurement and impact on pulp yield and lumber strength and stiffness. This was often the first, and in many cases, the only wood quality trait selected for. However, from a product standpoint, increased specific gravity has shown to lower many paper strength and stiffness properties and has been assumed to be directly attributable to increased fiber coarseness. As a result, it is currently not clear which fiber trait would best benefit a tree improvement program for paper products. This review found coarseness to be perhaps more important to paper strength and stiffness whereas tracheid length showed better promise from a breeding point of view due to its independence from specific gravity. However, both traits possessed strong heritability and influence on product performance and thus both would be beneficial to breed for depending on organizational goals and end product mix. The objective of this paper is to review and prioritize coarseness and tracheid length from both an end use and raw material perspective. To aid in prioritization, the variation, correlation, and heritability of both traits were reviewed along with significant genetic and phenotypic correlations. Variation trends within and between families as well as within a tree were reviewed.

scholarly journals KANDUNGAN KIMIA DAN DIMENSI SERAT AKAR, CABANG DAN BATANG BAGIAN ATAS KAYU GMELINA DAN KAYU JATI DI HUTAN RAKYAT SULAWESI SELATAN

PERENNIAL ◽  
2007 ◽  
Vol 3 (1) ◽  
pp. 11
Author(s):  
. Syahidah ◽  
. Hikmah ◽  
A. Detti Yunianti
Keyword(s):  
Key Words ◽  
Wood Species ◽  
Chemical Component ◽  
Raw Material ◽  
Community Forest ◽  
Chemical Content ◽  
Fiber Dimensions

The wood species used in this research was gmelina wood from community forest, Maros Regency and jati wood from community forest, Barru Regency. For objective of the research, parts of the tree were taken a short cut (5 cm) from root, branch and top of the tree. All samples were tested their chemical component (cellulose, hemicellulose, lignin and extractives) and fiber dimensions with it’s derivates fiber. The results showed that root, branch and top of the tree of gmelina wood and jati wood from community forest can be used as a raw material for pulp and papers. Key words: Chemical content, Fiber Dimension, Gmelina Wood, Jati Wood, Community Forest

scholarly journals INFLUENCE OF FOREST STAND DENSITY ON PINUS SYLVESTRIS ROUNDWOOD QUALITY IN EVEN-AGED MIXED SCOTS PINE STANDS IN MYRTILLOSA MEL. MESOTROPHIC SITE TYPE

2021 ◽  
Vol 3 ◽  
pp. 208-215
Author(s):  
Ziedonis Miklašēvičs
Keyword(s):  
Pinus Sylvestris ◽  
Tree Species ◽  
Prediction Models ◽  
Wood Quality ◽  
Research Work ◽  
Stand Density ◽  
Forest Stand ◽  
Raw Material ◽  
Quality Characteristic ◽  
Round Wood

Among different development directions for better forest utilization, the purposefully detailed assessment of wood quality as raw material, faciliating improved wood utilization in manufacturing of traditional roundwood products as well as brand new products, proves to be very perspective. Roundwood quality features substantially differ depending on forest stand geographic location, growing site conditions, tending of forest stands and other circumstances [2], [3], [11]. Therefore, the economical estimation of more important tree species in Latvia should not be based only on scientific conclusions made in other countries, so particular research is needed for this purpose. Pine (Pinus sylvestris) is the most widespread tree species in Latvia, therefore a research work provided the characteristic of round wood obtained from pine tree stem is an actual point from several aspects, as it is necessary;to create early prediction models of roundwood quality; to plan harvesting purposes;to create the data basis of economically more relevant domestic tree species;to provide the further development of roundwood quality assessment methods;to estimate the competitiveness of Latvia pine timber in the world marketThe main goal of study is to work out the quality characteristic of pine roundwood manufactured in final felling sites depending on timber formation damages- bark abrasion caused side drought.  

Sign in / Sign up

Export Citation Format

Share Document