scholarly journals KANDUNGAN KIMIA DAN DIMENSI SERAT AKAR, CABANG DAN BATANG BAGIAN ATAS KAYU GMELINA DAN KAYU JATI DI HUTAN RAKYAT SULAWESI SELATAN

PERENNIAL ◽  
2007 ◽  
Vol 3 (1) ◽  
pp. 11
Author(s):  
. Syahidah ◽  
. Hikmah ◽  
A. Detti Yunianti
Keyword(s):  
Key Words ◽  
Wood Species ◽  
Chemical Component ◽  
Raw Material ◽  
Community Forest ◽  
Chemical Content ◽  
Fiber Dimensions

The wood species used in this research was gmelina wood from community forest, Maros Regency and jati wood from community forest, Barru Regency. For objective of the research, parts of the tree were taken a short cut (5 cm) from root, branch and top of the tree. All samples were tested their chemical component (cellulose, hemicellulose, lignin and extractives) and fiber dimensions with it’s derivates fiber. The results showed that root, branch and top of the tree of gmelina wood and jati wood from community forest can be used as a raw material for pulp and papers. Key words: Chemical content, Fiber Dimension, Gmelina Wood, Jati Wood, Community Forest

KONTRIBUSI HUTAN PINUS RAKYAT TERHADAP PENDAPATAN MASYARAKAT DI TANA TORAJA

PERENNIAL ◽  
2007 ◽  
Vol 3 (1) ◽  
pp. 32
Author(s):  
Daud Malamassam
Keyword(s):  
Key Words ◽  
Forest Product ◽  
Community Forest ◽  
Forest Farming ◽  
Proportional Allocation

A study on the contribution of community forest to the community income in Tana Toraja Regency was implemented with the aim of identifying the community forest contribution to owners income and formulating the effort that can be carried out for enhancing the contribution. As the result, the community forest contribution to owners income is still very low (2.94% in average). Based on analysis result, the potencial revenue of community forest farming in Tana Toraja Regency can be 2.3 larger than the present obtaining revenue. The mentioned potencial revenue can be more increased by developing a more proportional allocation of the revenue to the related farmers (related communities) Key words : Community forest, contribution, community income, forest product and benefit

scholarly journals Alien Wood Species as a Resource for Wood-Plastic Composites

2020 ◽  
Vol 11 (1) ◽  
pp. 44
Author(s):  
Sergej Medved ◽  
Daša Krapež Tomec ◽  
Angela Balzano ◽  
Maks Merela
Keyword(s):  
Wood Species ◽  
Dimensional Stability ◽  
Laser Scanning ◽  
Large Scale ◽  
Laser Scanning Microscopy ◽  
Raw Material ◽  
Confocal Laser ◽  
Alien Plant ◽  
Wood Plastic Composites ◽  
Plastic Composites

Since invasive alien species are one of the main causes of biodiversity loss in the region and thus of changes in ecosystem services, it is important to find the best possible solution for their removal from nature and the best practice for their usability. The aim of the study was to investigate their properties as components of wood-plastic composites and to investigate the properties of the wood-plastic composites produced. The overall objective was to test the potential of available alien plant species as raw material for the manufacture of products. This would contribute to sustainability and give them a better chance of ending their life cycle. One of the possible solutions on a large scale is to use alien wood species for the production of wood plastic composites (WPC). Five invasive alien hardwood species have been used in combination with polyethylene powder (PE) and maleic anhydride grafted polyethylene (MAPE) to produce various flat pressed WPC boards. Microstructural analyses (confocal laser scanning microscopy and scanning electron microscopy) and mechanical tests (flexural strength, tensile strength) were performed. Furthermore, measurements of density, thickness swelling, water absorption and dimensional stability during heating and cooling were carried out. Comparisons were made between the properties of six WPC boards (five alien wood species and mixed boards). The results showed that the differences between different invasive alien wood species were less obvious in mechanical properties, while the differences in sorption properties and dimensional stability were more significant. The analyses of the WPC structure showed a good penetration of the polymer into the lumens of the wood cells and a fine internal structure without voids. These are crucial conditions to obtain a good, mechanically strong and water-resistant material.

scholarly journals PEMBINAAN USAHA KECIL MENENGAH DALAM PEMBUATAN SABUN COLEK DI TEMBESI TOWER KELURAHAN TEMBESI

2021 ◽  
Vol 3 (1) ◽  
pp. 93-102
Author(s):  
Hazimah Hazimah ◽  
Zefri Azharman
Keyword(s):  
Small And Medium Enterprises ◽  
New Product ◽  
Raw Material ◽  
Product Positioning ◽  
Service Activity ◽  
Chemical Content ◽  
Long Time ◽  
Medium Businesses ◽  
Medium Enterprises ◽  
The Impact

UKM (small and medium enterprises) in the Tembesi Tower, Tembesi sub-district, are not developing well. This is indicated by the low turnover obtained by each UKM (small and medium enterprise) in 1 month. customer expectations. New products must be made so that these small and medium businesses can survive and continue to exist. The new product must have a distinctive and good quality so that the product positioning is clearer and able to compete with other products on the market. This service activity aims to provide a solution to this by creating a new product in the form of a dab soap that is safe for health and environmentally friendly. Some soaps circulating in the market only prioritize cleaning power, but the chemical content in the soap is harmful to health and the environment. The impact of conventional soap on health is irritation of the skin which, if left for a long time, the irritation will turn into eczema. In addition, conventional soap also harms the environment because the raw material for soap comes from petroleum which is difficult to be broken down by bacteria. Community service activities are carried out in the form of coaching. The service team expects to increase the income and advantages of UKM (small and medium businesses) in the Tembesi Tower and to be able to create jobs or open a business with a revolutionary cream soap product design.

scholarly journals ANALISIS KANDUNGAN SAPONIN PADA DAUN DAN TANGKAI DAUN Carica pubescens Lenne & K. Koch

el–Hayah ◽  
2016 ◽  
Vol 5 (4) ◽  
pp. 143 ◽  
Author(s):  
Eko Budi Minarno
Keyword(s):  
Raw Materials ◽  
Herbal Medicines ◽  
The Body ◽  
Raw Material ◽  
Ring Test ◽  
Tropical Species ◽  
Color Test ◽  
Natural Medicine ◽  
Chemical Content ◽  
Carica Pubescens

<p><em>Carica pubescens Lenne &amp; K. Koch is a tropical species that adapt to the plateau environment and low temperatures. In East Java, the plant is found in Cangar and Bromo region. Morphological, chemical content, and analysis of protein banding pattern on C. pubescens has been done, but more on the analysis of active compounds for pharmaceutical raw materials and its accumulation in the body of the plant has not been widely studied. Saponins on C. pubescens potential as a raw material of natural medicine in the treatment of Diabetes Mellitus (DM). This study aims to determine the content of saponin in leaf and petiole of C. pubescens in terms of absorbance values. Saponins were analyzed by qualitative form the foam test, color test, Thin Layer Chromatography (TLC) analytical and preparative. Quantitative test in the form of UV-Vis spectrophotometry results preparative TLC. This research was done at the Laboratory of Department of Biology and Chemistry UIN Maulana Malik Ibrahim Malang. The results showed that the leaf and petiole of C. pubescens positive for the saponins with the formation of stable foam for 60 seconds at 1.5 cm - 1.7 cm. The third positive samples containing saponins triterpene the ring test produces a brownish color. Isolation saponin by TLC shows the best ratio of eluent chloroform: methanol: water (14: 6: 1) compounds can be separated perfectly. Saponin absorbance values obtained three samples as follows: petiole samples from the region Cangar amounted to 0.852, leaf samples from the region Cangar amounted to 0.686, and leaf samples from Bromo region amounted to 0,629. The highest saponins found in organs petiole. Thus the petiole of C. pubescens has the potential to be used as a source of triterpene saponins which can be developed into a commercial herbal medicines.</em></p>

scholarly journals Scientistsʼ Warning on Climate Change and Medicinal Plants

Planta Medica ◽  
2019 ◽  
Vol 86 (01) ◽  
pp. 10-18 ◽  
Author(s):  
Wendy L. Applequist ◽  
Josef A. Brinckmann ◽  
Anthony B. Cunningham ◽  
Robbie E. Hart ◽  
Michael Heinrich ◽  
...  
Keyword(s):  
Climate Change ◽  
Medicinal Plants ◽  
Raw Material ◽  
Negative Effects ◽  
Medicinal Species ◽  
Temperature And Precipitation ◽  
Anthropogenic Habitat ◽  
Precipitation Regimes ◽  
Chemical Content ◽  
Mitigate Climate Change

AbstractThe recent publication of a World Scientistsʼ Warning to Humanity highlighted the fact that climate change, absent strenuous mitigation or adaptation efforts, will have profound negative effects for humanity and other species, affecting numerous aspects of life. In this paper, we call attention to one of these aspects, the effects of climate change on medicinal plants. These plants provide many benefits for human health, particularly in communities where Western medicine is unavailable. As for other species, their populations may be threatened by changing temperature and precipitation regimes, disruption of commensal relationships, and increases in pests and pathogens, combined with anthropogenic habitat fragmentation that impedes migration. Additionally, medicinal species are often harvested unsustainably, and this combination of pressures may push many populations to extinction. A second issue is that some species may respond to increased environmental stresses not only with declines in biomass production but with changes in chemical content, potentially affecting quality or even safety of medicinal products. We therefore recommend actions including conservation and local cultivation of valued plants, sustainability training for harvesters and certification of commercial material, preservation of traditional knowledge, and programs to monitor raw material quality in addition to, of course, efforts to mitigate climate change.

Influence de la monensine sur la composition des parois de quelques champignons filamenteux

1992 ◽  
Vol 38 (4) ◽  
pp. 277-283 ◽  
Author(s):  
Yahya Koulali ◽  
Jean-Louis Fonvieille ◽  
Jane-Marie Touze-Soulet ◽  
Émile Benizri ◽  
Robert Dargent
Keyword(s):  
Chemical Composition ◽  
Key Words ◽  
Botrytis Cinerea ◽  
Uronic Acid ◽  
Sclerotium Rolfsii ◽  
Total Lipids ◽  
Chemical Content ◽  
Neutral Sugars ◽  
Achlya Bisexualis

Walls of young hyphae of Achlya bisexualis, Botrytis cinerea, and Sclerotium rolfsii growing in the presence or the absence of monensin were isolated and their chemical content was determined. Monensin induced modified proportions of various monomers resulting in a reduction of the (neutral sugars + uronic acid)/amine sugar ratio of B. cinerea and S. rolfsii (species of group chitin–glucans), and of cellulose in A. bisexualis (species of group cellulose-glucans).The walls of hyphae grown in presence of monensin also contained less total lipids and proteins. These modificationsin chemical composition are related to changes in cytological structure. Key words: fungi, monensin, wall.

An Experimental Study to Find the Acoustic Quality Indicators of Mulberry Wood

2010 ◽  
Author(s):  
Hossein Mansour ◽  
Mehdi Behzad
Keyword(s):  
Wood Species ◽  
Musical Instrument ◽  
Musical Instruments ◽  
Raw Material ◽  
Test Case ◽  
High Quality ◽  
Perceptual Knowledge ◽  
Acoustical Properties ◽  
Acoustic Quality

Morus Alba or mulberry is a wood species that is broadly used in making musical instruments in Eastern countries. However, the mechanical and acoustical properties of this type of wood are not investigated properly. In this study a set of features, previously examined for other species, are applied to this wood and its acoustic quality is evaluated. Setar, a Persian musical instrument made of mulberry wood, is selected as the test case of this experiment. Different samples of wood are gathered and categorized based on their appropriateness for Setar construction. The quality of each sample is identified based on the Perceptual knowledge of professional Setar makers. The most effective features are then selected and their average values are calculated for high quality samples. The result of this study helps Setar makers to select proper raw material before making an instrument. In addition, this approach can be applied to other wood species used in music industry.

scholarly journals PENYELIDIKAN KELAYAKAN KIMIA DAN PENYEBARAN CADANGAN PASIR BESI DAERAH TIKU KABUPATEN AGAM UNTUK BAHAN BAKU SEMEN PADA PT. SEMEN PADANG

2018 ◽  
Vol 19 (1) ◽  
pp. 39-42
Author(s):  
Heri Prabowo
Keyword(s):  
Mineral Content ◽  
Mapping Method ◽  
Raw Material ◽  
Tio2 Content ◽  
Soil Layers ◽  
X Ray ◽  
Surface Data ◽  
Chemical Content ◽  
Method Analysis

The purpose of this research is to know the mineral content of iron sand and its spreading both vertically and horizontally with the purpose of providing information and data for local government of Agam district for the development and arrangement of environment along the coast. In order to obtain information about the depth of iron sand can be used geoelectric method because one of the physical properties of metal elements including iron is to have low resistivity. In this study used resistivity mapping method that aims to determine the variation of the arrangement of soil layers vertically and horizontally. The configuration used in this method is Schlumberger configuration. To know the chemical content of iron sand is done by taking samples of iron sand systematically and represented at some point. The sample was analyzed chemical composition by XRF method (X-Ray Fluorescence), then correlated with some surface data, so that the depiction of the quality of iron sand of Tiku Regency. From the interpretation of soil resistivity value on 2 paths it can be concluded that iron sand in Tiku Beach area is in depth 0 - 20 m. Chemical content of iron sand from XRF method analysis shows Fe2O3 percentage of 10 - 35%, with TiO2 content of 1 - 3%. The quality of iron sand can be used as raw material for cement maker.

Fonctionnalisation du δ-pyronène, un nouveau synthon terpénique

1996 ◽  
Vol 74 (10) ◽  
pp. 1852-1856 ◽  
Author(s):  
Marie Jeanne Quirin ◽  
Bernard Delmond ◽  
Martine Taran
Keyword(s):  
Key Words ◽  
Raw Material

δ-Pyronene, a terpenic synthon recently made industrially available from myrcene, has been characterized. It is an excellent raw material for the preparation of numerous intermediates used in the synthesis of perfumes and retinoids. Furthermore, new terpenic compounds including the cyclogeranyl skeleton have been prepared. Key words: terpenes, pyronenes, cyclogeranyl derivatives, perfumes. [Journal translation]

Sign in / Sign up

Export Citation Format

Share Document