scholarly journals Identification of Recycled Cooking Oil by Varying Number of Au/GO Coated Fiber Optic’s Loop Ring

2021 ◽  
Vol 15 ◽  
pp. 1-8
Author(s):  
Wan Maisarah Mukhtar ◽  
Nur Fatin Liyana Manaf ◽  
Razman Mohd Halim
Keyword(s):  
Gold Nanoparticles ◽  
Evanescent Field ◽  
Large Area ◽  
Frying Time ◽  
Fibre Optics ◽  
Coated Fiber ◽  
Casting Technique ◽  
Cooking Oil ◽  
Vis Spectroscopy ◽  
Loop Ring

This study investigates the effect gold nanoparticles (Au)/graphene oxide (GO) coated fibre optics with various number of loop ring in identifying recycled cooking oil based on their frying time. Various layers of gold nanoparticles (AuNP) suspension were deposited onto the substrate via drop casting technique. Few material characterizations were performed such as Fourier Transform Infrared (FTIR) spectroscopy, Ultraviolet Visible (UV-Vis) spectroscopy and refractometer analysis. Three macrobending structures of Au/GO coated fiber optic’s loop ring such as single, double and triple loops with diameter of 1.5cm were formed to generate large area of evanescent field around the fibre and to excite surface plasmon polaritons due to the interaction between AuNPs and analytes. Cooking oil samples with different frying time such as 14 minutes, 28 minutes and 42 minutes were prepared as analytes. The FTIR analysis revealed some changes in the transmittance percent of some bands as well as some slight shifts in the exact position of the bands due to the different of fatty acid composition. As the Au/GO coated fibre optics were immersed into the samples, the penetration depths were obtained as 142.75nm and 168.91nm at operating wavelengths of λ=1310nm and λ=1550nm, respectively. By using 1550nm operating wavelength due to its greater penetration depth than 1310nm, triple loop rings fibre optics coated with two layers of AuNP and one layer of GO exhibits a linear consistency with maximum sensitivity up to 69.17% due to the formation of large evanescent field around the loop area and intense SPP excitation.

Seed-mediated synthesis and PEG coating of gold nanoparticles for controlling morphology and sizes

MRS Advances ◽  
2020 ◽  
Vol 5 (63) ◽  
pp. 3353-3360
Author(s):  
Susana Helena Arellano Ramírez ◽  
Perla García Casillas ◽  
Christian Chapa González
Keyword(s):  
Gold Nanoparticles ◽  
Polyethylene Glycol ◽  
Room Temperature ◽  
Colloidal Stability ◽  
Infrared Spectrometry ◽  
Ammonium Bromide ◽  
Chloroauric Acid ◽  
Vis Spectroscopy ◽  
Seed Mediated ◽  
Peg Coating

AbstractA significant area of research is biomedical applications of nanoparticles which involves efforts to control the physicochemical properties through simple and scalable processes. Gold nanoparticles have received considerable attention due to their unique properties that they exhibit based on their morphology. Gold nanospheres (AuNSs) and nanorods (AuNRs) were prepared with a seed-mediated method followed of polyethylene glycol (PEG)-coating. The seeds were prepared with 0.1 M cetyltrimethyl-ammonium bromide (CTAB), 0.005 M chloroauric acid (HAuCl4), and 0.01 M sodium borohydride (NaBH4) solution. Gold nanoparticles with spherical morphology was achieved by growth by aggregation at room temperature, while to achieve the rod morphology 0.1 M silver nitrate (AgNO3) and 0.1 M ascorbic acid solution were added. The gold nanoparticles obtained by the seed-mediated synthesis have spherical or rod shapes, depending on the experimental conditions, and a uniform particle size. Surface functionalization was developed using polyethylene glycol. Morphology, and size distribution of AuNPs were evaluated by Field Emission Scanning Electron Microscopy. The average size of AuNSs, and AuNRs was 7.85nm and 7.96 x 31.47nm respectively. Fourier transform infrared spectrometry was performed to corroborate the presence of PEG in the AuNPs surface. Additionally, suspensions of AuNSs and AuNRs were evaluated by UV-Vis spectroscopy. Gold nanoparticles were stored for several days at room temperature and it was observed that the colloidal stability increased once gold nanoparticles were coated with PEG due to the shield formed in the surface of the NPs and the increase in size which were 9.65±1.90 nm of diameter for AuNSs and for AuNRs were 29.03±5.88 and 8.39±1.02 nm for length and transverse axis, respectively.

Optimization of Gold Nanoparticles Synthesis using Design of Experiments Technique

2017 ◽  
Vol 68 (7) ◽  
pp. 1518-1423
Author(s):  
Adina Turcu Stiolica ◽  
Mariana Popescu ◽  
Maria Viorica Bubulica ◽  
Carmen Nicoleta Oancea ◽  
Claudiu Nicolicescu ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
Zeta Potential ◽  
Design Of Experiments ◽  
Process Model ◽  
Sodium Citrate ◽  
Drug Carriers ◽  
Chloroauric Acid ◽  
Gold Colloids ◽  
Citrate Concentration ◽  
Vis Spectroscopy

Gold nanoparticles are considered the newest drug carriers for different diseases. Therefore it is appropriate continuous optimization of their preparation. In this study, gold colloids with an average size of 1 - 26 nm were obtained by the reduction of tetrachloroauric acid with trisodium citrate. The nanomaterials were characterized by UV-Vis spectroscopy and dynamic light scattering technique. In addition, zeta potential was measured for samples synthesized in order to determine the stability of the colloids. A Two-level Full Factorial design was chosen to determine the optimum set of process parameters (chloroauric acid concentration and sodium citrate concentration) and their effect on various gold nanoparticles characteristics (size and zeta potential). These effects were quantified using Design of Experiments (DoE) with 5 runs and 1 centerpoint. The selected objective and process model in this investigation are screening and interaction. Findings from this research show that to obtain particles larger than 35 nm, it is recommended to increase sodium citrate concentration, at low chloroauric acid values. These conditions will help to achieve smaller zeta potential, too.

An Effort to Making a Colorimitric Nano-Biosensor for Vibrio cholera Detection

2020 ◽  
Vol 16 (5) ◽  
pp. 793-804
Author(s):  
Naimeh Mahheidari ◽  
Jamal Rashidiani ◽  
Hamid Kooshki ◽  
Khadijeh Eskandari
Keyword(s):  
Gold Nanoparticles ◽  
Colorimetric Assay ◽  
Au Nanoparticle ◽  
Bacteria Detection ◽  
Great Promise ◽  
Bacterial Cells ◽  
Vibrio Cholera ◽  
Minimum Concentration ◽  
Vis Spectroscopy ◽  
Fast Procedure

Background: Today, nanoparticles hold great promise in biomedical researches and applications including bacteria detection. The rapid and sensitive outcomes of bacteria detection strategies using nanoparticle conjugates become determinative, especially in bacterial outbreaks. In the current research, we focused on detecting V. cholera bacteria and its toxin using a thiocyanate/Au nanoparticle. Thiocyanate adsorbed strongly on the surface of gold nanoparticles and changed the surface by enhancing surface plasmon resonance of gold nanoparticles. Objective: This method is tried to introduce a simple and fast procedure to assay vibrio cholera. So, it is observed by the naked eyes as well. Methods: We used two antibodies (Ab) for V. cholera detection: a) a primary antibody conjugated to magnetic nanoparticles (MNPs) for trapping V. cholera bacterial cells, and b) a secondary Abconjugated thiocyanate-GNPs as a colorimetric detector. Then, an immuno-magnetic separation system connected to a colorimetric assay was designed based on the GNPs. The results were measured by ultraviolet-visible (UV-Vis) spectroscopy. Results: The results showed that gold nanoparticles are an appropriate optical assay for detecting biological samples in a minimum concentration and also it can be easily seen by the naked eyes. The linear range of this biosensor is 3.2×104 to 28×104 cells per ml. Conclusion: In this research, a colorimetric immune assay based on gold nanoparticles was designed to improve the sensitivity of V. cholera detection. Also, this method can be used for the detection of other biological agents.

scholarly journals Protected Gold Nanoparticles with Thioethers and Amines As Surrogate Ligands

2013 ◽  
Vol 2013 ◽  
pp. 1-4 ◽  
Author(s):  
M. Rafiq H. Siddiqui
Keyword(s):  
Gold Nanoparticles ◽  
Variable Temperature ◽  
Size Control ◽  
Analytical Techniques ◽  
High Resolution Electron Microscopy ◽  
Phase Method ◽  
Two Phase ◽  
H Nmr ◽  
Resolution Electron ◽  
Vis Spectroscopy

Dodecyl sulfide, dodecyl amine, and hexylamine were shown to act as surrogate ligands (L) via metastable gold nanoparticles. By collating analytical and spectroscopic data obtained simultaneously, empirical formula Au24L was assigned. These impurity-free nanoparticles obtained in near quantitative yields showing exceptional gold assays (up to 98%Au) were prepared by a modification of the two-phase method. Replacement reactions on the Au24L showed that Au:L ratios may be increased (up to Au55:L (L= (H25C12)2S)) or decreased (Au12:L (L= H2NC12H25and H2NC6H13)) as desired. This work encompassing the role of analytical techniques used, that is, elemental analysis, variable temperature1H NMR, FAB mass spectrometry, UV-Vis spectroscopy, thin film X-ray diffraction, and high-resolution electron microscopy (HREM) has implications in the study of size control, purity, stability, and metal assays of gold nanoparticles.

scholarly journals Effects of Different Surfactant Charges on the Formation of Gold Nanoparticles by the LASiS Method

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2937
Author(s):  
Muhammad Zulfajri ◽  
Wei-Jie Huang ◽  
Genin-Gary Huang ◽  
Hui-Fen Chen
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Gold Nanoparticles ◽  
Laser System ◽  
Synthesis Process ◽  
Au Nps ◽  
Laser Fluences ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
532 Nm

The laser ablation synthesis in solution (LASiS) method has been widely utilized due to its significant prospects in laser microprocessing of nanomaterials. In this study, the LASiS method with the addition of different surfactant charges (cationic CTAB, nonionic TX-100, and anionic SDS) was used to produce Au NPs. An Nd:YAG laser system at 532 nm excitation with some synthetic parameters, including different laser fluences, ablation times, and surfactant concentrations was performed. The obtained Au NPs were characterized by UV-Vis spectroscopy, transmission electron microscopy, and zeta potential analyzer. The Au NPs exhibited the maximum absorption peak at around 520 nm for all samples. The color of Au NPs was changed from red to reddish by increasing the laser fluence. The surfactant charges also played different roles in the Au NPs’ growth during the synthesis process. The average sizes of Au NPs were found to be 8.5 nm, 5.5 nm, and 15.5 nm with the medium containing CTAB, TX-100, and SDS, respectively. Besides, the different surfactant charges induced different performances to protect Au NPs from agglomeration. Overall, the SDS and CTAB surfactants exhibited higher stability of the Au NPs compared to the Au NPs with TX-100 surfactant.

Punica granatum peel extracts mediated the green synthesis of gold nanoparticles and their detailed in vivo biological activities

2021 ◽  
Vol 10 (1) ◽  
pp. 882-892
Author(s):  
Sami Bawazeer ◽  
Abdur Rauf ◽  
Taufiq Nawaz ◽  
Anees Ahmed Khalil ◽  
Muhammad Sameem Javed ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
Muscle Relaxant ◽  
Biological Activities ◽  
Punica Granatum ◽  
Environmental Safety ◽  
Surface Plasma Resonance ◽  
Pomegranate Peel ◽  
Synthesis Of Nanoparticles ◽  
Vis Spectroscopy

Abstract Requirements for developing new methodologies to biosynthesize nanoparticles are increasing day by day. The typical chemical synthesis of nanoparticles has raised concerns regarding environmental safety and adverse impact on human health. Therefore, there is an urgent need to develop green synthesized nanoparticles that are considered to be safe, ecofriendly, and cost-effective as compared to chemical approaches. Hence, in this study, we synthesized and characterized pomegranate peel extract-based gold nanoparticles (PP-AuNPs) through UV-visible spectroscopy, FT-IR, and AFM microscopy. Furthermore, the biological activities like analgesic, muscle relaxant, and sedative properties of synthesized PP-AuNPs were also determined. The change of color to dark ruby indicates the formation of AuNPs. The surface plasma resonance (SPR) peak in the absorption spectra was shown at 525 nm by using (UV-Vis) spectroscopy. A single distinctive peak implied the shape of nanoparticles to be spherical. AFM images revealed that the biosynthesized nanoparticles were spherical in shape. Furthermore, the images confirm the uniform distribution of PP-AuNPs with particle sizes ranging from 4 to 16 nm. Different classes of phytochemicals were preliminarily identified in extracts. The analgesic effect of extracts (70.04%) and PP-AuNPs (81.98%) demonstrated a significant (p < 0.001) percent reduction in writhing at a dose of 100 and 15 mg·kg−1, respectively. A mild muscle relaxant effect was noted against both the tested samples while a significant sedative effect was observed for both samples; however, PP-AuNPs weres more sedative compared to the extract. Pomegranate peel extracts and synthesized PP-AuNPs were found to possess significant analgesic, muscle relaxant, and sedative properties.

scholarly journals Biosynthesis of Gold Nanoparticles Using Fusarium oxysporum f. sp. cubense JT1, a Plant Pathogenic Fungus

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Janki N. Thakker ◽  
Pranay Dalwadi ◽  
Pinakin C. Dhandhukia
Keyword(s):  
Antimicrobial Activity ◽  
Gold Nanoparticles ◽  
Chloride Solution ◽  
Pathogenic Fungus ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Plant Pathogenic Fungus ◽  
Extracellular Synthesis ◽  
Vis Spectroscopy ◽  
Methods Of Synthesis

The development of reliable processes for the synthesis of gold nanoparticles is an important aspect of current nanotechnology research. Recently, reports are published on the extracellular as well as intracellular biosynthesis of gold nanoparticles using microorganisms. However, these methods of synthesis are rather slow. In present study, rapid and extracellular synthesis of gold nanoparticles using a plant pathogenic fungus F. oxysporum f. sp. cubense JT1 (FocJT1) is reported. Incubation of FocJT1 mycelium with auric chloride solution produces gold nanoparticles in 60 min. Gold nanoparticles were characterized by UV-Vis spectroscopy, FTIR, and particle size analysis. The particles synthesized were of 22 nm sized, capped by proteins, and posed antimicrobial activity against Pseudomonas sp.

scholarly journals Aggregation of Gold Nanoparticles in Presence of the Thermoresponsive Cationic Diblock Copolymer PNIPAAM48-b-PAMPTMA6

Polymers ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 4066
Author(s):  
David Herrera Robalino ◽  
María del Mar Durán del Amor ◽  
Carmen María Almagro Gómez ◽  
José Ginés Hernández Cifre
Keyword(s):  
Gold Nanoparticles ◽  
High Ionic Strength ◽  
Solution Temperature ◽  
Trimethylammonium Chloride ◽  
Aggregation Process ◽  
Critical Solution Temperature ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Copolymer Poly ◽  
Positively Charged

The adsorption of the thermoresponsive positively charged copolymer poly(N-isopropylacrylamide)-block-poly(3-acrylamidopropyl)trimethylammonium chloride, PNIPAAM48-b-PAMPTMA6(+), onto negatively charged gold nanoparticles can provide stability to the nanoparticles and make the emerging structure tunable by temperature. In this work, we characterize the nanocomposite formed by gold nanoparticles and copolymer chains and study the influence of the copolymer on the expected aggregation process that undergoes those nanoparticles at high ionic strength. We also determine the lower critical solution temperature (LCST) of the copolymer (around 42 °C) and evaluate the influence of the temperature on the nanocomposite. For those purposes, we use dynamic light scattering, UV-vis spectroscopy and transmission electron microscopy. At the working PNIPAAM48-b-PAMPTMA6(+) concentration, we observe the existence of copolymer structures that trap the gold nanoparticles and avoid the formation of nanoparticles aggregates. Finally, we discuss how these structures can be useful in catalysis and nanoparticles recovery.

scholarly journals Biosynthesized gold nanoparticles-doped hydroxyapatite as antibacterial and antioxidant nanocomposite

2021 ◽  
Author(s):  
Is Fatimah ◽  
Putwi Widya Citradewi ◽  
Amri Yahya ◽  
Bambang Nugroho ◽  
Habibi Hidayat ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Antioxidant Activity ◽  
Particle Size ◽  
Gold Nanoparticles ◽  
Antibacterial Activity ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Dpph Scavenging Activity ◽  
Dpph Scavenging

Abstract The composite of green synthesized gold nanoparticles (Au NPs)-doped hydroxyapatite (HA) has been prepared. The gold nanoparticles were produced via bioreduction of HAuCl4 with Clitoria ternatea flower extract, and utilized in the synthesis of hydroxyapatite using Ca(OH)2 and ammonium diphosphate as precursor. The aim of this research is to study the structural analysis of the composite and antibacterial activity test toward Eschericia coli, Staphylococcus aureus, Klebsiela pneumoniae, and Streptococcus pyogenes. In addition, the antioxidant activity was evaluated using 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging method. The monitoring of gold nanoparticles formation was conducted by UV–vis spectroscopy and particle size analyses, meanwhile the synthesized composite was studied using X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The results showed that homogeneously dispersed gold nanoparticles in HA structure was obtained with the particle size ranging at 5-80 nm. The nanocomposite demonstrated antibacterial activity against tested bacteria. The nanocomposite expressed an antioxidant activity as shown by the DPPH scavenging activity of 66 and 58% at the concentration of 100 μg/mL and 50 μg/mL, respectively.

scholarly journals The Bio-fabrication of Gold Nanoparticles (AuNPs) by Green Method and Study of its Electrochemical Applications

2020 ◽  
Vol 1 (4) ◽  
pp. 22-25
Author(s):  
Azwan Morni
Keyword(s):  
Gold Nanoparticles ◽  
Ir Spectroscopy ◽  
Face Centered Cubic ◽  
X Ray Diffraction ◽  
Green Method ◽  
Oh Groups ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

This study reports a green method for the synthesis of gold nanoparticles (AuNPs) using the aqueous extract of Salix aegyptiaca extract. The effects of gold salt concentration, extract concentration and extract quantity were investigated on nanoparticles synthesis. Novel methods of ideally synthesizing AuNPs are thus thought that are formed at ambient temperatures, neutral pH, low costs and environmentally friendly fashion. AuNPs were characterized with different techniques such as UV–vis spectroscopy, FT-IR spectroscopy, X-ray diffraction, and TEM. FT-IR spectroscopy revealed that gold nanoparticles were functionalized with biomolecules that have primary carbonyl group, -OH groups and other stabilizing functional groups. TEM experiments showed that these nanoparticles are formed with various shapes and X-ray diffraction pattern showed high purity and face centered cubic structure of AuNPs. For electrochemical properties of AuNPs, a modified glassy carbon electrode using AuNPs (AuNPs/GCE) was investigated. The results show that electronic transmission rate between the modified electrode and [Fe (CN)6]3-/4- increased.

Sign in / Sign up

Export Citation Format

Share Document