scholarly journals Enrichment Opak Kelor Ikan Modifikasi dan Dampaknya pada Anak Stunting di Kabupaten Lombok Utara

2020 ◽  
Vol 5 (1) ◽  
pp. 9
Author(s):  
Fifi Luthfiyah ◽  
Susilo Wirawan
Keyword(s):  
Raw Materials ◽  
Intervention Research ◽  
Health Intervention ◽  
Observational Method ◽  
Traditional Foods ◽  
Before And After ◽  
Research Problems

Stunting prevalence (5-12 years) is 34.4% which is the highest number in the NTB region compared to 10 other regencies / cities (NTB Province average of 14.9%) (Riskesdas, 2013). Fish Kelor Opak (OKI) is one of the traditional foods that can be strived to reduce Stunting (very short) in nutrient-prone groups in North Lombok Regency. In the three years of Health Intervention Research, problems still arise that quite disturb the sustainability of OKI consumption. There are not yet many traditional Opak craftsmen who produce Fish Kelor Opac (OKI) because of the ability of the craftsmen to provide raw materials and need modification of the materials, so that people like it. The purpose of this study was to modify Fish Moringa Opaque and its effects on stunting children. Descriptive observational method with emphasis on making Moringa Fish Opaque with different fish ingredients. The best products are given to children stunting. The results showed that modified Fish Opaque Moringa was made which had better taste, shape and texture than before. There is a difference in BB in children with stunting + OKI (P1) before and intervention is 2.07 kg, compared to P0 of 0.56 kg and There is a difference in TB in children with stunting + OKI (P1) before and after the intervention of 0.54 cm compared to P0 of 0.4 cm.

scholarly journals Innovative passive reinforcements for the gradual stabilization of a landslide according with the observational method

Landslides ◽  
2021 ◽  
Author(s):  
Lorenzo Brezzi ◽  
Alberto Bisson ◽  
Davide Pasa ◽  
Simonetta Cola
Keyword(s):  
Monitoring System ◽  
Low Cost ◽  
Economic Losses ◽  
Fe Model ◽  
Site Conditions ◽  
Observational Method ◽  
Rainy Period ◽  
Sustainable Solutions ◽  
Before And After ◽  
Set Up

AbstractA large number of landslides occur in North-Eastern Italy during every rainy period due to the particular hydrogeological conditions of this area. Even if there are no casualties, the economic losses are often significant, and municipalities frequently do not have sufficient financial resources to repair the damage and stabilize all the unstable slopes. In this regard, the research for more economically sustainable solutions is a crucial challenge. Floating composite anchors are an innovative and low-cost technique set up for slope stabilization: it consists in the use of passive sub-horizontal reinforcements, obtained by coupling a traditional self-drilling bar with some tendons cemented inside it. This work concerns the application of this technique according to the observational method described within the Italian and European technical codes and mainly recommended for the design of geotechnical works, especially when performed in highly uncertain site conditions. The observational method prescribes designing an intervention and, at the same time, using a monitoring system in order to correct and adapt the project during realization of the works on the basis of new data acquired while on site. The case study is the landslide of Cischele, a medium landslide which occurred in 2010 after an exceptional heavy rainy period. In 2015, some floating composite anchors were installed to slow down the movement, even if, due to a limited budget, they were not enough to ensure the complete stabilization of the slope. Thanks to a monitoring system installed in the meantime, it is now possible to have a comparison between the site conditions before and after the intervention. This allows the evaluation of benefits achieved with the reinforcements and, at the same time, the assessment of additional improvements. Two stabilization scenarios are studied through an FE model: the first includes the stabilization system built in 2015, while the second evaluates a new solution proposed to further increase the slope stability.

Use of mapping technology in health intervention research

2004 ◽  
Vol 52 (3) ◽  
pp. 142-146 ◽  
Author(s):  
Wilbert M. Gesler ◽  
Matthew Hayes ◽  
Thomas A. Arcury ◽  
Anne H. Skelly ◽  
Sally Nash ◽  
...  
Keyword(s):  
Intervention Research ◽  
Health Intervention ◽  
Mapping Technology

Development of two dosimetry systems based on basic violet dye for possible use as radiation dosimeters

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Nehad Magdy ◽  
Sameh Gafar
Keyword(s):  
Gamma Ray ◽  
Raw Materials ◽  
Absorbed Dose ◽  
Chemical Yield ◽  
Radiation Sensitivity ◽  
Vital Role ◽  
Radiation Chemical ◽  
Content Type ◽  
Before And After

Purpose The purpose of this research paper is to study a comparison between two dosimetry systems, both of them based on basic violet dye (BV). Design/methodology/approach The first system depends on (BV) (incorporating polyvinyl alcohol) as a thin-film dosimeter. The second system also relies on (BV) as a solution dosimeter, which is more sensitive to gamma rays. The two prepared film/solutions have a considerable signal that decreases upon irradiation and the strength of the signal decreases with increasing radiation dose. Findings The gamma ray absorbed dose for these dosimeters was found to be up to 35 kGy for films and 1 kGy for the liquid phase. All dosimetric characteristics as radiation chemical yield, additive substance, dose-response function, radiation sensitivity, also before and after-irradiation stability under various conditions were considered. Practical implications It is expected the vital role of gamma radiation on this dye in its two forms or two media. This reveals their wide applications in the field of gamma irradiation processing. Originality/value These two dosimetry systems which depend upon the same dye are safe to handle, inexpensive, available raw materials and can be applied in various dosimetry applications as mentioned above.

scholarly journals Tension mechanical properties of recycled glass-epoxy composite material

2012 ◽  
pp. 189-198 ◽  
Author(s):  
Jelena Petrovic ◽  
Darko Ljubic ◽  
Marina Stamenovic ◽  
Ivana Dimic ◽  
Slavisa Putic
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Composite Material ◽  
Composite Materials ◽  
Modulus Of Elasticity ◽  
Epoxy Composite ◽  
Raw Materials ◽  
Mechanical Tests ◽  
Recycled Glass ◽  
Before And After

The significance of composite materials and their applications are mainly due to their good properties. This imposes the need for their recycling, thus extending their lifetime. Once used composite material will be disposed as a waste at the end of it service life. After recycling, this kind of waste can be used as raw materials for the production of same material, which raises their applicability. This indicates a great importance of recycling as a method of the renowal of composite materials. This study represents a contribution to the field of mechanical properties of the recycled composite materials. The tension mechanical properties (tensile strength and modulus of elasticity) of once used and disposed glass-epoxy composite material were compared before and after the recycling. The obtained results from mechanical tests confirmed that the applied recycling method was suitable for glass-epoxy composite materials. In respect to the tensile strength and modulus of elasticity it can be further assessed the possibility of use of recycled glass-epoxy composite materials.

scholarly journals Alternative foaming agents for fabrication of glass foam

2021 ◽  
Vol 11 (5) ◽  
pp. 39-48
Author(s):  
Ildikó Fóris ◽  
Gábor Mucsi
Keyword(s):  
Raw Materials ◽  
Powder Mixtures ◽  
Foaming Agent ◽  
Foaming Agents ◽  
Heat Treated ◽  
Specimen Density ◽  
Before And After ◽  
Different Temperatures ◽  
Glass Foam ◽  
Eggshell Waste

Glass foam tablets were produced from container glass bottles (CGB) using eggshell waste (ESW) and perlite (P) as foaming agent in different portions. The ground raw materials (CGB, ESW, P) were homogenized and pressed with hydraulic piston press machine at different pressures (in the case of P containing tablets 30 MPa and ESW containing tablets 15 MPa, 30 MPa and 40 MPa were used).The obtained glass tablets were heat treated at different temperatures (in the case of P containing tablets 800 °C, 900°C, 1000°C and 1100°C, and ESW containing tablets 600 °C, 700 °C, 800 °C and 900 °C were used). The study shows the specimen density of tablets before and after heat treatment, as well as the true density of the powder mixtures before tableting and the abrasion resistance of the glass foam products.

scholarly journals Tingkat Kepatuhan Wajib Pajak Badan Usaha Mikro Kecil dan Menengah Setelah Diberlakukan Tarif 1 % (Final) PPh (Studi Kasus di KPP Pratama Pontianak)

2016 ◽  
Vol 5 (2) ◽  
pp. 144
Author(s):  
Sari Zawitri ◽  
Elsa Sari Yuliana
Keyword(s):  
Tax Compliance ◽  
Tax Revenue ◽  
Corporate Tax ◽  
Narrative Case Study ◽  
Policy Suggestions ◽  
Before And After ◽  
Research Problems ◽  
Gross Income ◽  
The Government

Year 2015 is the year for developing Tax Payer and the year of issuance of GovernmentRegulation No. 46 Year 2013, which imposed 1% tax to SMEs with a turnover (gross income)from Rp 1 to a maximum of Rp 4.8 billion per year. The research problems are formulated: (1)How does the level of tax compliance in KPP Pratama Pontianak before and after the 1% taxpolicies for SME corporate tax payer? (2) What efforts made by the tax authorities in improvingtax payer compliance company in terms of delivering the tax obligations on KPP PratamaPontianak. The research method was an exploratory, descriptive, narrative case study approachto the object KPP Pratama Pontianak. Outcomes of this study are expected KPP PratamaPontianak be an example or reference for other KPP in performing their duties and functions aspublic service on tax. The results showed that there was a slight increase tax payer compliance inKPP Pontianak after their policy of 1% per month tax on turnover (gross income), whencompared with the prior policy. Suggestions for the government, in this case the DirectorateGeneral of Taxation, in formulating tax policy in order to maximize tax revenue. 

Sign in / Sign up

Export Citation Format

Share Document