Effects of Curing Method on Properties and Salt-Scaling Resistance of Concrete under Lab Testing

2021 ◽  
Author(s):  
Greg Richards ◽  
Medhat Shehata
Keyword(s):  
Fly Ash ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Alkali Concentration ◽  
Salt Scaling ◽  
High Calcium ◽  
Curing Methods ◽  
Curing Method ◽  
High Alkali ◽  
Scaling Resistance

This paper presents a study of the effect of curing on the salt-scaling resistance of concrete containing supplementary cementitious materials (SCMs) under lab conditions. Two curing methods were examined: moist curing and wrapping in a tight plastic sheet. Wrapping concrete slabs in plastic was adopted to represent curing methods that do not supply the concrete with additional water. The two curing methods produced different scaling results; however, the outcomes did not change in terms of meeting or failing the acceptance limit. Curing in plastic wraps produced higher carbonation depth prior to exposing the sample to the salt solution. This could have contributed, partly, to the higher scaling obtained in wrapped samples, other than the sample with 40% high-calcium fly ash. For this sample, there is evidence that curing using plastic wraps maintained high alkali concentration in the surface concrete, which could have enhanced the pozzolanic activity of the fly ash at the surface.

scholarly journals Effects of Curing Method on Properties and Salt-Scaling Resistance of Concrete under Lab Testing

2021 ◽  
Author(s):  
Greg Richards ◽  
Medhat Shehata
Keyword(s):  
Fly Ash ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Alkali Concentration ◽  
Salt Scaling ◽  
High Calcium ◽  
Curing Methods ◽  
Curing Method ◽  
High Alkali ◽  
Scaling Resistance

This paper presents a study of the effect of curing on the salt-scaling resistance of concrete containing supplementary cementitious materials (SCMs) under lab conditions. Two curing methods were examined: moist curing and wrapping in a tight plastic sheet. Wrapping concrete slabs in plastic was adopted to represent curing methods that do not supply the concrete with additional water. The two curing methods produced different scaling results; however, the outcomes did not change in terms of meeting or failing the acceptance limit. Curing in plastic wraps produced higher carbonation depth prior to exposing the sample to the salt solution. This could have contributed, partly, to the higher scaling obtained in wrapped samples, other than the sample with 40% high-calcium fly ash. For this sample, there is evidence that curing using plastic wraps maintained high alkali concentration in the surface concrete, which could have enhanced the pozzolanic activity of the fly ash at the surface.

scholarly journals Effects of Curing Method on Properties and Salt-Scaling Resistance of Concrete under Lab Testing

2021 ◽  
Author(s):  
Greg Richards ◽  
Medhat Shehata
Keyword(s):  
Fly Ash ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Alkali Concentration ◽  
Salt Scaling ◽  
High Calcium ◽  
Curing Methods ◽  
Curing Method ◽  
High Alkali ◽  
Scaling Resistance

This paper presents a study of the effect of curing on the salt-scaling resistance of concrete containing supplementary cementitious materials (SCMs) under lab conditions. Two curing methods were examined: moist curing and wrapping in a tight plastic sheet. Wrapping concrete slabs in plastic was adopted to represent curing methods that do not supply the concrete with additional water. The two curing methods produced different scaling results; however, the outcomes did not change in terms of meeting or failing the acceptance limit. Curing in plastic wraps produced higher carbonation depth prior to exposing the sample to the salt solution. This could have contributed, partly, to the higher scaling obtained in wrapped samples, other than the sample with 40% high-calcium fly ash. For this sample, there is evidence that curing using plastic wraps maintained high alkali concentration in the surface concrete, which could have enhanced the pozzolanic activity of the fly ash at the surface.

scholarly journals Effect of High Calcium Fly Ash, Ladle Furnace Slag, and Limestone Filler on Packing Density, Consistency, and Strength of Cement Pastes

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 301
Author(s):  
Eleftherios K. Anastasiou
Keyword(s):  
Fly Ash ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Strength Development ◽  
Ladle Furnace ◽  
Limestone Filler ◽  
Cement Pastes ◽  
High Calcium ◽  
High Calcium Fly Ash ◽  
Furnace Slag

Environmental considerations and technical benefits have directed research towards reducing cement clinker content in concrete, and one of the best ways to do this is to replace cement with supplementary cementitious materials. High calcium fly ash, ladle furnace slag, and limestone filler were investigated as supplementary cementitious materials in cement pastes, and binary mixtures were produced at 10%, 20%, and 30% cement replacement rates for each material. The water requirement for maximum packing and for normal consistency were obtained for each paste, and strength development was determined at 3, 7, 28, and 90 days for the 20% replacement rate. Furthermore, two ternary mixtures at 30% cement replacement were also prepared for maximum packing density and tested for compressive strength development. The results showed that high calcium fly ash decreased cement paste packing and increased water demand but contributed to strength development through reactivity. Ladle furnace slag and limestone filler, on the other hand, were less reactive and seemed to contribute to strength development through the filler effect. The ternary paste with 70% cement, 20% high calcium fly ash, and 10% limestone filler showed equivalent strength development to that of the reference cement paste.

scholarly journals Strength, Shrinkage and Early Age Characteristics of One-Part Alkali-Activated Binders with High-Calcium Industrial Wastes, Solid Reagents and Fibers

2021 ◽  
Vol 5 (12) ◽  
pp. 315
Author(s):  
Dhruv Sood ◽  
Khandaker M. A. Hossain
Keyword(s):  
Fly Ash ◽  
Sodium Metasilicate ◽  
Cementitious Materials ◽  
Industrial Wastes ◽  
Supplementary Cementitious Materials ◽  
Powder Form ◽  
High Calcium ◽  
Dry Mixing ◽  
Alkali Activated Binders ◽  
Alkali Activated

Alkali-activated binders (AABs) are developed using a dry mixing method under ambient curing incorporating powder-form reagents/activators and industrial waste-based supplementary cementitious materials (SCMs) as precursors. The effects of binary and ternary combinations/proportions of SCMs, two types of powder-form reagents, fundamental chemical ratios (SiO2/Al2O3, Na2O/SiO2, CaO/SiO2, and Na2O/Al2O3), and incorporation of polyvinyl alcohol (PVA) fibers on fresh state and hardened characteristics of 16 AABs were investigated to assess their performance for finding suitable mix compositions. The mix composed of ternary SCM combination (25% fly-ash class C, 35% fly-ash class F, and 40% ground granulated blast furnace slag) with multi-component reagent combination (calcium hydroxide and sodium metasilicate = 1:2.5) was found to be the most optimum binder considering all properties with a 56 day compressive strength of 54 MPa. The addition of 2% v/v PVA fibers to binder compositions did not significantly impact the compressive strengths. However, it facilitated mitigating shrinkage/expansion strains through micro-confinement in both binary and ternary binders. This research bolsters the feasibility of producing ambient cured powder-based cement-free binders and fiber-reinforced, strain-hardening composites incorporating binary/ternary combinations of SCMs with desired fresh and hardened properties.

Effect of ground granulated blast funrnace slag and fly ash on strength, permeability, and under-water abrasion of fine-grained concrete

2020 ◽  
Vol 71 (7) ◽  
pp. 775-788
Author(s):  
Quyet Truong Van ◽  
Sang Nguyen Thanh
Keyword(s):  
Fly Ash ◽  
Concrete Strength ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Chloride Permeability ◽  
Cement Replacement ◽  
Fine Grained ◽  
Granulated Blast Furnace Slag ◽  
Compressive Strength Test ◽  
Economic Ground

The utilisation of supplementary cementitious materials (SCMs) is widespread in the concrete industry because of the performance benefits and economic. Ground granulated blast furnace slag (GGBFS) and fly ash (FA) have been used as the SCMs in concrete for reducing the weight of cement and improving durability properties. In this study, GGBFS at different cement replacement ratios of 0%, 20%, 40% and 60% by weight were used in fine-grained concrete. The ternary binders containing GGBFS and FA at cement replacement ratio of 60% by weight have also evaluated. Flexural and compressive strength test, rapid chloride permeability test and under-water abrasion test were performed. Experimental results show that the increase in concrete strength with GGBFS contents from 20% to 40% but at a higher period of maturity (56 days and more). The chloride permeability the under-water abrasion reduced with the increasing cement replacement by GGBFS or a combination of GGBFS and FA

scholarly journals New Approach for the Determination of Radiological Parameters on Hardened Cement Pastes with Coal Fly Ash

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 475
Author(s):  
Ana María Moreno de los Reyes ◽  
José Antonio Suárez-Navarro ◽  
Maria del Mar Alonso ◽  
Catalina Gascó ◽  
Isabel Sobrados ◽  
...  
Keyword(s):  
Fly Ash ◽  
Activity Concentration ◽  
Gamma Ray ◽  
Coal Fly Ash ◽  
Cementitious Materials ◽  
New Method ◽  
Supplementary Cementitious Materials ◽  
Hardened Cement ◽  
Cement Pastes ◽  
Activity Concentrations

Supplementary cementitious materials (SCMs) in industrial waste and by-products are routinely used to mitigate the adverse environmental effects of, and lower the energy consumption associated with, ordinary Portland cement (OPC) manufacture. Many such SCMs, such as type F coal fly ash (FA), are naturally occurring radioactive materials (NORMs). 226Ra, 232Th and 40K radionuclide activity concentration, information needed to determine what is known as the gamma-ray activity concentration index (ACI), is normally collected from ground cement samples. The present study aims to validate a new method for calculating the ACI from measurements made on unground 5 cm cubic specimens. Mechanical, mineralogical and radiological characterisation of 28-day OPC + FA pastes (bearing up to 30 wt % FA) were characterised to determine their mechanical, mineralogical and radiological properties. The activity concentrations found for 226Ra, 212Pb, 232Th and 40K in hardened, intact 5 cm cubic specimens were also statistically equal to the theoretically calculated values and to the same materials when ground to a powder. These findings consequently validated the new method. The possibility of determining the activity concentrations needed to establish the ACI for cement-based materials on unground samples introduces a new field of radiological research on actual cement, mortar and concrete materials.

scholarly journals Long-term mechanical and shrinkage properties of cementitious grouts for structural repair

2019 ◽  
Vol 4 ◽  
pp. 9-15
Author(s):  
Md Shamsuddoha ◽  
Götz Hüsken ◽  
Wolfram Schmidt ◽  
Hans-Carsten Kühne ◽  
Matthias Baeßler
Keyword(s):  
Fly Ash ◽  
Flexural Strength ◽  
Cementitious Materials ◽  
Response Surfaces ◽  
Supplementary Cementitious Materials ◽  
Strength Development ◽  
Structural Repair ◽  
Positive Effects ◽  
Micro Silica

Grouts have numerous applications in construction industry such as joint sealing, structural repair, and connections in precast elements. They are particularly favoured in rehabilitation of structures due to penetrability and convenience of application. Grouts for repair applications typically require high-performance properties such as rapid strength development and superior shrinkage characteristics. Sometimes industrial by-products referred as supplementary cementitious materials (SCM) are used with neat cement due to their capabilities to provide binding properties at delayed stage. Micro silica, fly ash and metakaolin are such SCMs, those can modify and improve properties of cement products. This study aims at investigating long-term mass loss and linear shrinkage along with long-term compressive and flexural strength for grouts produced from ultrafine cement and SCMs. A series of mixtures were formulated to observe the effect of SCMs on these grout properties. Properties were determined after 365 days of curing at 23oC and 55% relative humidity. The effect of SCMs on the properties are characterised by statistical models. Response surfaces were constructed to quantify these properties in relation to SCMs replacement. The results suggested that shrinkage was reduced by metakaolin, while micro silica and fly ash had positive effects on compressive and flexural strength, respectively.

Effect of w/cm and Composition on Correlations of Concrete Electrical Resistivity and Chloride Migration Coefficients

2016 ◽  
Vol 711 ◽  
pp. 21-28
Author(s):  
Francisco J. Presuel-Moreno
Keyword(s):  
Electrical Resistivity ◽  
Steady State ◽  
Fly Ash ◽  
Laboratory Experiments ◽  
Chloride Ion ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Ion Migration ◽  
Resistivity Measurements ◽  
Chloride Migration

The performance with regard to chloride penetration of specimens made with three base compositions (supplementary cementitious materials: 20% fly ash, 20% fly ash + 8% silica fume, and 50% slag replacement by weight of cement), and water-to-cementitious ratios of 0.35, 0.41, or 0.47 were investigated here. In this investigation, laboratory experiments were carried out to study the correlation between electrical resistivity and non-steady state chloride ion migration coefficients (Dnssm) of concrete. NT Build 492 was used to determine chloride migration coefficients. Rapid migration tests and resistivity measurements were performed several times over two years, and the non-steady state migration coefficient (Dnssm) vs. resistivity values were correlated. Experimental results show that a good correlation was found between electrical resistivity and Dnssm. Based on the relationships developed from this investigation, it appears that the correlations are age and composition dependent.

The Effect of Homogenization Procedure on Mechanical Properties of High-Performance Concrete with Partial Replacement of Cement by Supplementary Cementitious Materials

2019 ◽  
Vol 292 ◽  
pp. 102-107 ◽  
Author(s):  
Josef Fládr ◽  
Petr Bílý ◽  
Karel Šeps ◽  
Roman Chylík ◽  
Vladimír Hrbek
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Water Content ◽  
High Performance ◽  
High Performance Concrete ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Depth Of Penetration ◽  
Cement Additive

High-performance concrete is a very specific type of concrete. Its production is sensitive to both the quality of compounds used and the order of addition of particular compounds during the homogenization process. The mechanical properties were observed for four dosing procedures of each of the three tested concrete mixtures. The four dosing procedures were identical for the three mixes. The three mixes varied only in the type of supplementary cementitious material used and in water content. The water content difference was caused by variable k-value of particular additives. The water-to-binder ratio was kept constant for all the concretes. The additives used were metakaolin, fly ash and microsilica. The comparison of particular dosing procedures was carried out on the values of basic mechanical properties of concrete. The paper compares compressive strength and depth of penetration of water under pressure. Besides the comparsion of macro-mechanical properties, the effect of microsilica and fly ash additives on micro-mechanical properties was observed with the use of scanning electron microscopy (SEM) and nanoindentation data analysis. Nanoindentation was used to determine the thickness and strength of interfacial transition zone (ITZ) for different sequence of addition of cement, additive and aggregate. The thickness obtained by nanoindentation was further investigated by SEM EDS line scanning.

Effect of Curing Temperature on Hardened Concrete Properties

2005 ◽  
Vol 1914 (1) ◽  
pp. 97-104 ◽  
Author(s):  
W. Micah Hale ◽  
Thomas D. Bush ◽  
Bruce W. Russell ◽  
Seamus F. Freyne
Keyword(s):  
Fly Ash ◽  
Cementitious Materials ◽  
Curing Temperature ◽  
Supplementary Cementitious Materials ◽  
Cold Weather ◽  
Strength Development ◽  
Hardened Concrete ◽  
Hardened Properties ◽  
Hot Weather ◽  
Materials Used

Often, concrete is not mixed or placed under ideal conditions. Particularly in the winter or the summer months, the temperature of fresh concrete is quite different from that of concrete mixed under laboratory conditions. This paper examines the influence of supplementary cementitious materials on the strength development (and other hardened properties) of concrete subjected to different curing regimens. The supplementary cementitious materials used in the research program were ground granulated blast furnace slag (GGBFS), fly ash, and a combination of both materials. The three curing regimens used were hot weather curing, standard curing, and cold weather curing. Under the conditions tested, the results show that the addition of GGBFS at a relatively low replacement rate can improve the hardened properties for each curing regimen. This improvement was noticeable not only at later ages but also at early ages. Mixtures that contained both materials (GGBFS and fly ash) performed as well as and, in most cases, better than mixtures that contained only portland cement in all curing regimens.

Sign in / Sign up

Export Citation Format

Share Document