scholarly journals Simplified method of analysis of adjacent precast “deck free” concrete box beams used in accelerated bridge construction

Author(s):  
Masrra Jajjawi

The prefabricated bridge is common method in construction since it provides controlled environmental conditions and long-term durability. These adjacent precast box beams are placed side by side with 15mm gaps, the top flanges connected with longitudinal shear keys poured on-site to assist in truckload distribution. Since the concrete-filled joints provide transverse shear rigidity, the load transferred from one beam to another takes place through transverse shear. A parametric study is conducted to investigate the accuracy of simplified analysis method in CHBDC for shear-connected beams to the adjacent box beams. A 3D finite-element was conducted on a wide range of box beams to obtain their magnification factors for moment and shear when subjected to truck loading. The obtained results were correlated with CHBDC and a more reliable simplified equations for distribution factors was developed. Special attention was given to the limitations of CHBDC simplified method and how it can be revised to include the adjacent box-beam.

2021 ◽  
Author(s):  
Masrra Jajjawi

The prefabricated bridge is common method in construction since it provides controlled environmental conditions and long-term durability. These adjacent precast box beams are placed side by side with 15mm gaps, the top flanges connected with longitudinal shear keys poured on-site to assist in truckload distribution. Since the concrete-filled joints provide transverse shear rigidity, the load transferred from one beam to another takes place through transverse shear. A parametric study is conducted to investigate the accuracy of simplified analysis method in CHBDC for shear-connected beams to the adjacent box beams. A 3D finite-element was conducted on a wide range of box beams to obtain their magnification factors for moment and shear when subjected to truck loading. The obtained results were correlated with CHBDC and a more reliable simplified equations for distribution factors was developed. Special attention was given to the limitations of CHBDC simplified method and how it can be revised to include the adjacent box-beam.


TAPPI Journal ◽  
2018 ◽  
Vol 17 (04) ◽  
pp. 231-240
Author(s):  
Douglas Coffin ◽  
Joel Panek

A transverse shear strain was utilized to characterize the severity of creasing for a wide range of tooling configurations. An analytic expression of transverse shear strain, which accounts for tooling geometry, correlated well with relative crease strength and springback as determined from 90° fold tests. The experimental results show a minimum strain (elastic limit) that needs to be exceeded for the relative crease strength to be reduced. The theory predicts a maximum achievable transverse shear strain, which is further limited if the tooling clearance is negative. The elastic limit and maximum strain thus describe the range of interest for effective creasing. In this range, cross direction (CD)-creased samples were more sensitive to creasing than machine direction (MD)-creased samples, but the differences were reduced as the shear strain approached the maximum. The presented development provides the foundation for a quantitative engineering approach to creasing and folding operations.


2020 ◽  
pp. 66-73
Author(s):  
A. Simonova ◽  
S. Chudakov ◽  
R. Gorenkov ◽  
V. Egorov ◽  
A. Gostry ◽  
...  

The article summarizes the long-term experience of practical application of domestic breakthrough technologies of preventive personalized medicine for laboratory diagnostics of a wide range of socially significant non-infectious diseases. Conceptual approaches to the formation of an integrated program for early detection and prevention of civilization diseases based on these technologies are given. A vision of the prospects for the development of this area in domestic and foreign medicine has been formed.


Author(s):  
S.V. Borshch ◽  
◽  
R.M. Vil’fand ◽  
D.B. Kiktev ◽  
V.M. Khan ◽  
...  

The paper presents the summary and results of long-term and multi-faceted experience of international scientific and technical cooperation of Hydrometeorological Center of Russia in the field of hydrometeorology and environmental monitoring within the framework of WMO programs, which indicates its high efficiency in performing a wide range of works at a high scientific and technical level. Keywords: World Meteorological Organization, major WMO programs, representatives of Hydrometeorological Center of Russia in WMO


2017 ◽  
Vol 68 (3) ◽  
pp. 599-601
Author(s):  
Dan Paul Stefanescu ◽  
Oana Roxana Chivu ◽  
Claudiu Babis ◽  
Augustin Semenescu ◽  
Alina Gligor

Any economic activity carried out by an organization, can generate a wide range of environmental implications. Particularly important, must be considered the activities that have a significant negative effect on the environment, meaning those which pollute. Being known the harmful effects of pollution on the human health, the paper presents two models of utmost importance, one of the material environment-economy interactions balance and the other of the material flows between environmental factors and socio-economic activities. The study of these models enable specific conditions that must be satisfied for the economic processes friendly coexist to the environment for long term, meaning to have a minimal impact in that the residues resulting from the economic activity of the organization to be as less harmful to the environment.


HortScience ◽  
1997 ◽  
Vol 32 (3) ◽  
pp. 436E-436
Author(s):  
Martin P.N. Gent

The persistence of effects of paclobutrazol or uniconazol on stem elongation was determined for several years after large-leaf Rhododendron and Kalmia latifolia were treated with a single-spray application of these triazol growth-regulator chemicals. Potted plants were treated in the second year from propagation, and transplanted into the field in the following spring. The elongation of stems was measured in the year of application and in the following 2 to 4 years. Treatments with a wide range of doses were applied in 1991, 1992, or 1995. For all except the most-dilute applications, stem elongation was retarded in the year following application. At the highest doses, stem growth was inhibited 2 years following application. The results could be explained by a model of growth regulator action that assumed stem elongation was inversely related to amount of growth regulator applied. The dose response coefficient for paclobutrazol was less than that for uniconazol. The dose that inhibited stem elongation one-half as much as a saturating dose was about 0.5 and 0.05 mg/plant, for paclobutrazol and uniconazol, respectively. The dose response coefficient decreased exponentially with time after application, with an exponential time constant of about 2/year. The model predicted a dose of growth regulator that inhibited 0.9 of stem elongation immediately after application would continue to inhibit 0.5 of stem elongation in the following year.


2019 ◽  
Vol 20 (3) ◽  
pp. 251-264 ◽  
Author(s):  
Yinlu Feng ◽  
Zifei Yin ◽  
Daniel Zhang ◽  
Arun Srivastava ◽  
Chen Ling

The success of gene and cell therapy in clinic during the past two decades as well as our expanding ability to manipulate these biomaterials are leading to new therapeutic options for a wide range of inherited and acquired diseases. Combining conventional therapies with this emerging field is a promising strategy to treat those previously-thought untreatable diseases. Traditional Chinese medicine (TCM) has evolved for thousands of years in China and still plays an important role in human health. As part of the active ingredients of TCM, proteins and peptides have attracted long-term enthusiasm of researchers. More recently, they have been utilized in gene and cell therapy, resulting in promising novel strategies to treat both cancer and non-cancer diseases. This manuscript presents a critical review on this field, accompanied with perspectives on the challenges and new directions for future research in this emerging frontier.


Author(s):  
Ilana Seager ◽  
Douglas S. Mennin ◽  
Amelia Aldao

Generalized anxiety disorder (GAD) is a debilitating condition characterized by excessive, pervasive, uncontrollable, and paralyzing worries about a wide range of future situations. Individuals with this condition frequently find themselves stuck in worry and tension cycles in futile attempts at reducing uncertainty and increasing control. GAD has been associated with substantial impairments in functioning and reduced quality of life. GAD remains poorly understood, and the long-term efficacy and end-state functioning resulting from treatment are weaker compared to other anxiety disorders. Some treatments (e.g., emotion regulation therapy, acceptance-based behavioral therapy) have improved efficacy, partly by targeting emotional dysfunction. Basic psychopathology research has focused on identifying the role of negative affect in GAD, so little is known about how positive affect is experienced and regulated in this disorder. This is particularly important in light of the overlap of this condition with major depressive disorder, which is characterized by low or suppressed positive emotion. Developing such an understanding is essential to further improve the efficacy of emotion-based treatments. This chapter reviews current and future directions in the study of positive affect in GAD. The chapter reviews the nascent research on positive affect and GAD, then illustrates dimensions of future work.


Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1598
Author(s):  
Chih-Yu Chung ◽  
Yu-Ju Chen ◽  
Chia-Hui Kang ◽  
Hung-Yun Lin ◽  
Chih-Ching Huang ◽  
...  

Carbon quantum dots (CQDs) are emerging novel nanomaterials with a wide range of applications and high biocompatibility. However, there is a lack of in-depth research on whether CQDs can cause acute or long-term adverse reactions in aquatic organisms. In this study, two different types of CQDs prepared by ammonia citrate and spermidine, namely CQDAC and CQDSpd, were used to evaluate their biocompatibilities. In the fish embryo acute toxicity test (FET), the LD50 of CQDAC and CQDSpd was about 500 and 100 ppm. During the stage of eleutheroembryo, the LD50 decreased to 340 and 55 ppm, respectively. However, both CQDs were quickly eliminated from embryo and eleutheroembryo, indicating a lack of bioaccumulation. Long-term accumulation of CQDs was also performed in this study, and adult zebrafish showed no adverse effects in 12 weeks. In addition, there was no difference in the hatchability and deformity rates of offspring produced by adult zebrafish, regardless of whether they were fed CQDs or not. The results showed that both CQDAC and CQDSpd have low toxicity and bioaccumulation to zebrafish. Moreover, the toxicity assay developed in this study provides a comprehensive platform to assess the impacts of CQDs on aquatic organisms in the future.


Author(s):  
Alyssa T Brooks ◽  
Hannah K Allen ◽  
Louise Thornton ◽  
Tracy Trevorrow

Abstract Health behavior researchers should refocus and retool as it becomes increasingly clear that the challenges of the COVID-19 pandemic surpass the direct effects of COVID-19 and include unique, drastic, and ubiquitous consequences for health behavior. The circumstances of the pandemic have created a natural experiment, allowing researchers focusing on a wide range of health behaviors and populations with the opportunity to use previously collected and future data to study: (a) changes in health behavior prepandemic and postpandemic, (b) health behavior prevalence and needs amidst the pandemic, and (c) the effects of the pandemic on short- and long-term health behavior. Our field is particularly challenged as we attempt to consider biopsychosocial, political, and environmental factors that affect health and health behavior. These realities, while daunting, should call us to action to refocus and retool our research, prevention, and intervention efforts


Sign in / Sign up

Export Citation Format

Share Document