scholarly journals Effects of polypropylene fibers on ultra high performance concrete at elevated temperature

2020 ◽  
Vol 21 ◽  
pp. 11-16
Author(s):  
Ahmed Maher Seyam ◽  
Samir Shihada ◽  
Rita Nemes
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Elevated Temperature ◽  
Fire Resistance ◽  
Quartz Sand ◽  
High Performance ◽  
High Performance Concrete ◽  
Mineral Admixture ◽  
Ultra High Performance Concrete ◽  
Polypropylene Fibres

This paper presents an experimental study to evaluate the influence of polypropylene on fire resistance of ultra-high performance concrete (UHPC). Concrete mixtures are prepared by using different percentages of polypropylene fibres 0%, 0.75% and 1.5%, by volume. Samples are heated to 250 or 500 °C, for exposures 2.5 or 5 hours, and tested after cooling for compressive strength and flexural tensile strength. The research includes the use of mineral admixture of a recognized, polypropylene fibre, quartz sand, superplasticizers and without using any type of aggregates other than the quartz sand. The effect on subjected samples to elevated temperature up to 250 ºC and 500 ºC for durations 2.5 hours and 5 hours was studied for each mix and comparing the results of compressive strength and tensile strength among the mixes. Results obtained, showed that adding 0.75% of polypropylenes fibres only to a concrete mixture, improved the fire resistance of the concrete by 27% and 72% when the samples exposed to 250 ºC and 500 ºC for 2.5 hours respectively, compared with concrete mixes without fibres. In addition, the residual strength was improved by 39% and 14% when the samples exposed to 250 ºC and 500 ºC for 5 hours, respectively.

scholarly journals Meta-Analysis of Fiber Impact on Mechanical Properties of Ultra-High Performance Concrete

2020 ◽  
Author(s):  
Faiq M. Al-Zwainy ◽  
Hussam k. Risan ◽  
Rana I. K. Zaki
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
High Strength Concrete ◽  
High Performance ◽  
High Performance Concrete ◽  
Meta Analysis ◽  
High Strength ◽  
Ultimate Compressive Strength ◽  
Ultra High Performance Concrete

The purpose of this study was to conduct a meta-analysis that shows the influence of fiber on ultimate compressive strength and tensile strength of ultra-high performance concrete. The internet scholarly search engines and ScienceDirect article references were used to illustrate the papers concerning the experimental investigations of mechanical properties of ultra-high strength concrete with and without fiber with clearly, completely and comparative raw data. The normal concrete test results were dismissed from this search. Seven trials were identified based on the adopted inclusion and exclusion criteria above. The meta-analysis based on standardized mean difference was carried out on the basis of a fixed-effects model for the major outcomes of the ultimate compressive and tensile properties of ultra-high performance concrete. A total of 888 test specimens were enrolled in these seven trials. The combined analysis yielded a sign of a significant improvement in ultimate compressive strength and tensile strength of ultra-high strength concrete with fiber addition of 2% by concrete volume. The summary effect size of ultimate compressive strength was 2.34 while a more improvement in term of tensile strength with effect size of 2.64. By addition fiber of 2% provides a significant benefit in mechanical properties of ultra-high performance concrete.

A Stress Analysis of the Post-Tensioned Anchorage Zones Using UHPC

2017 ◽  
Vol 737 ◽  
pp. 500-504 ◽  
Author(s):  
Jee Sang Kim ◽  
Tae Hong Kim
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Prestressed Concrete ◽  
High Performance ◽  
High Performance Concrete ◽  
Fe Analysis ◽  
Zone Size ◽  
Ultra High Performance Concrete ◽  
Normal Concrete ◽  
Post Tensioned

Researches on Ultra High Performance Concrete (UHPC) have been conducted worldwide owing to its outstanding durability and strength performances compared to those of normal concrete. The application of UHPC to prestressed concrete structures, which may seem to be the most appropriate and beneficial, may result significant improvement in the design of anchorage zones due to its high compressive and tensile strength. The size of anchorage blocks and amounts of reinforcements may be reduced drastically. This paper examines the stress magnitudes and distributions of post-tensioned anchorage zones using UHPC which have nominal compressive strength levels of 120, 150 and 180 MPa respectively, by FE analysis. The analytic results are verified with the existing experimental work of 180MPa UHPC. It can be concluded that the use of UHPC to post-tensioned members gives significant reduction of anchorage zone size and no reinforcements are required.

Compressive Strength of Various Types of Concrete Exposed to Elevated Temperature

2020 ◽  
Vol 309 ◽  
pp. 62-67
Author(s):  
Kateřina Horníková ◽  
Marek Foglar
Keyword(s):  
Compressive Strength ◽  
Elevated Temperature ◽  
High Temperatures ◽  
High Performance ◽  
High Performance Concrete ◽  
Experimental Results ◽  
Experimental Program ◽  
Polypropylene Fibres ◽  
Compressive Strength Of Concrete ◽  
Air Entrained Concrete

This paper presents the results of experimental program focused on change of compressive strength of concrete exposed to elevated temperature. The change of compressive strength was studied for several types of concrete with different properties (common concrete, air-entrained concrete, concrete with polypropylene fibres, high performance concrete with steel fibres and concrete with basalt fibres). The samples were exposed to high temperatures up to 1000 0C at, the compressive strength was measured at the elevated temperature. This paper presents results of this experiment and comparison of experimental results with available data from literature and valid Eurocodes.

scholarly journals Ultra-high-performance concrete with local high unburned carbon fly ash

DYNA ◽  
2021 ◽  
Vol 88 (216) ◽  
pp. 38-47
Author(s):  
Joaquín Abellán García ◽  
Nancy Torres Castellanos ◽  
Jaime Antonio Fernandez Gomez ◽  
Andres Mauricio Nuñez Lopez
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
High Performance ◽  
High Performance Concrete ◽  
Unburned Carbon ◽  
High Tech ◽  
Ultra High Performance Concrete ◽  
Conventional Concrete ◽  
The Cost

Ultra-high-performance concrete (UHPC) is a kind of high-tech cementitious material with superb mechanical and durability properties compared to other types of concrete. However, due to the high content of cement and silica fume used, the cost and environmental impact of UHPC is considerably higher than conventional concrete. For this reason, several efforts around the world have been made to develop UHPC with greener and less expensive local pozzolans. This study aimed to design and produce UHPC using local fly ash available in Colombia. A numerical optimization, based on Design of Experiments (DoE) and multi-objective criteria, was performed to obtain a mixture with the proper flow and highest compressive strength, while simultaneously having the minimum content of cement. The results showed that, despite the low quality of local fly ashes in Colombia, compressive strength values of 150 MPa without any heat treatment can be achieved.

scholarly journals Mechanical Properties and Environmental Evaluation of Ultra-High-Performance Concrete with Aeolian Sand

Materials ◽  
2020 ◽  
Vol 13 (14) ◽  
pp. 3148 ◽  
Author(s):  
Hongyan Chu ◽  
Fengjuan Wang ◽  
Liguo Wang ◽  
Taotao Feng ◽  
Danqian Wang
Keyword(s):  
Compressive Strength ◽  
Environmental Impact ◽  
Young’S Modulus ◽  
High Performance ◽  
High Performance Concrete ◽  
Young's Modulus ◽  
Ultra High Performance Concrete ◽  
Aeolian Sand ◽  
Binder Ratio ◽  
Water Binder Ratio

Ultra-high-performance concrete (UHPC) has received increasing attention in recent years due to its remarkable ductility, durability, and mechanical properties. However, the manufacture of UHPC can cause serious environmental issues. This work addresses the feasibility of using aeolian sand to produce UHPC, and the mix design, environmental impact, and mechanical characterization of UHPC are investigated. We designed the mix proportions of the UHPC according to the modified Andreasen and Andersen particle packing model. We studied the workability, microstructure, porosity, mechanical performance, and environmental impact of UHPC with three different water/binder ratios. The following findings were noted: (1) the compressive strength, flexural strength, and Young’s modulus of the designed UHPC samples were in the ranges of 163.9–207.0 MPa, 18.0–32.2 MPa, and 49.3–58.9 GPa, respectively; (2) the compressive strength, flexural strength, and Young’s modulus of the UHPC increased with a decrease in water/binder ratio and an increase in the steel fibre content; (3) the compressive strength–Young’s modulus correlation of the UHPC could be described by an exponential formula; (4) the environmental impact of UHPC can be improved by decreasing its water/binder ratio. These findings suggest that it is possible to use aeolian sand to manufacture UHPC, and this study promotes the application of aeolian sand for this purpose.

Sign in / Sign up

Export Citation Format

Share Document