scholarly journals ASSESSMENT OF SELECTED HEAVY METALS IN DRINKING WATER CONSUMED WITHIN KATSINA METROPOLIS

2020 ◽  
Vol 4 (3) ◽  
pp. 531-537
Author(s):  
ABDULRASHID YUSUF ◽  
Abdurrahman Nuraddeen

The study involved the analysis of some selected heavy metals in drinking water consumed within Katsina Metropolis. The water samples were collected from Ajiwa dam raw water, taps, wells, boreholes, and sachet waters and the concentration of heavy metals (Cd, Pb, Cr, Co, and Ni), was determined using Atomic Absorption Spectrophotometer (AAS). The results obtained from the water analysis indicate that cadmium was not found in all the water samples. The concentrations range for lead were  (6.222-109.63)µg/L with maximum concentration value of 109.63 µg/L in Ajiwa dam raw water, above the World Health Organization (WHO) limit, nickel (0.72-6.99)µg/L with maximum concentration value of 6.99 µg/L in borehole water, within WHO limit, chromium (36-72)µg/L with maximum concentration value of 72 µg/L in well water, above WHO limit, cobalt  (4.758-9.516) µg/L with maximum concentration value of 9.516 µg/L in well water, within WHO limit. The results indicate that most of the concentrations of the heavy metals determined were within the WHO limit, except for chromium in well water which may arises from the Government activities of money recycling and incineration of old bank notes which does not affect other water sources in the area and lead in Ajiwa dam raw water which was further removed through water treatment processes. Moreover, the Analysis of Variance  (ANOVA)  indicate no significant difference in the means of the heavy metals concentrations in all the water samples analyzed, and this may be due to the same physicochemical factors and limited industrial activities in the study area

2018 ◽  
Vol 54 (4B) ◽  
pp. 240
Author(s):  
Phan Nhu Nguyet

The communities within Binh Dinh province in the Central Vietnam are reliant on groundwater as their primary supply of domestic and potable water. Meanwhile, it is seriously contaminated with fluoride that causing fluorosis problem for people. This study aims to investigate the link between severity of dental fluorosis rate in a population and fluoride concentration in drinking water in Tay Son area. A total of 50 well-water samples were collected and 220 people were surveyed by questionnaire from 50 households at 3 villages: Tay Phu, Binh Tuong, Tay Giang of Tay Son district, Binh Dinh province, Vietnam. The quantitative assessment of severity of dental fluorosis was done by calculating the Community Fluorosis Index (CFI) using Dean’s classification. Result of this study showed that fluoride concentration in well-water varied from 0.31 mg/L to 7.69 mg/L (mean 2.66 mg/L, SD: 2.18 mg/L) with 70 % of well-water samples above the maximum permissible limit of 1.5 mg/L of World Health Organization (WHO) drinking water standard. 100 % people surveyed was suffered from dental fluorosis and Dean scale of dental fluorosis ranged from level 2 to level 5. CFI varied from 3.45 to 4.13 above limit value (0.6). The community seriously suffered from dental fluorosis. The fluoride concentrations and Dean Index have high correlation (r = 0.580, p < 0.0001). Based upon results of this study, it is recommended that the government should supply drinking water with appropriate fluoride content for this community.


2011 ◽  
Vol 8 (1) ◽  
pp. 276-280 ◽  
Author(s):  
Olcay Kaplan ◽  
Nuran Cikcikoglu Yildirim ◽  
Numan Yildirim ◽  
Nilgun Tayhan

The drinking water quality is associated with the conditions of the water supply networks, the pollution and the contamination of groundwater with pollutants of both anthropogenic and natural origin. In this study, water samples were taken from four different waterworks in Tunceli, Turkey and heavy metals concentrations (As, Cu, Cd, Cr, Pb, Ni and Hg) were measured. Four sampling sites were pre-defined in different locations of the city. The obtained results showed that, the heavy metals concentrations in water samples did not exceed the values of WHO (World Health Organization), EC (Europe Community), EPA (Environment Protection Agency) and TSE-266 (Turkish Standard) guidelines.


2020 ◽  
Vol 18 (6) ◽  
pp. 1050-1064
Author(s):  
Isabel Cipriani-Avila ◽  
Jon Molinero ◽  
Eliza Jara-Negrete ◽  
Miren Barrado ◽  
César Arcos ◽  
...  

Abstract Chemical elements, which are present in drinking water, could vary due to water sources, treatment processes or even the plumbing materials. Most of these elements do not represent a threat, while others, such as heavy metals, have been proven to cause harmful effects over human and aquatic wildlife. In this study, the quality of drinking water in three cities in Ecuador, Quito, Ibarra and Guayaquil was assessed through a multielement analysis and the heavy metal pollution index (HPI). A total of 102 drinking water samples and six natural water samples were collected and analyzed. Within the scope of analysis, results show that water quality complies with local and international guidelines. HPI did not show significant differences in the water that is supplied to the different neighborhoods of the three cities studied. However, actions should be taken to protect the sources of water, especially in Guayaquil, due to the presence of lead and chromium. For instance, lead was found in 2.8% of the samples in concentrations above World Health Organization (WHO) recommended values. Thus, we suggest to assessing the quality and age of the plumbing system within the whole country, in order to avoid drinking water contamination with heavy metals.


2021 ◽  
Author(s):  
Md. Aminur Rahman ◽  
Md. Abul Hashem ◽  
Md. Sohel Rana ◽  
Md. Rashidul Islam

Abstract Safe drinking water is directly linked to good human health. An excessive amount of manganese (Mn) in drinking water supplies causes people show symptoms of neurotoxicity. In this study, the level of Mn in potable water sourced from tube wells located in 9 (nine) districts of Bangladesh was monitored. In total 170 (one hundred and seventy) water samples were collected and Mn was quantified by atomic absorption spectroscopy (AAS). The levels of Mn found in the tube well water samples of Sirajganj, Meherpur, Chuadanga, Jhenaidah, Magura, Faridpur, Jashore, Satkhira, and Khulna were 0.37–1.86, 0.10–4.11, 0.30–0.76, 0.26–0.94, 0.01–0.18, 0.21–1.78, 0.08–1.23, 0.05–0.27 and 0.01–2.11 mg/L, respectively. Results revealed that Mn level was beyond the highest contaminated levels of 0.1 mg/L and 0.4 mg/L, which are recommended by Bangladesh Drinking Standard (BDS) and World Health Organization (WHO), respectively. The maximum Mn contaminated level reached up to 4.11 mg/L (mean: 0.53 mg/L). The Mn level in tube well water exceeded 51.1% and 75.9% set by the recommended value of WHO and BDS, respectively. Furthermore, the calculated hazard quotient (HQ) value for Mn was observed to be greater than unity, indicating both children and adults risked potential non-carcinogenic health issues. The water supply authorities should take steps to provide Mn-free drinking water for communities.


2001 ◽  
Vol 67 (7) ◽  
pp. 3328-3330 ◽  
Author(s):  
M. S. Islam ◽  
A. Siddika ◽  
M. N. H. Khan ◽  
M. M. Goldar ◽  
M. A. Sadique ◽  
...  

ABSTRACT Five tube-wells in Matlab, Bangladesh, were selected for analysis of selected biophysicochemical parameters. The results showed that all tube-well water samples contained zooplankton and bacteria. Results for some of the parameters were outside the accepted limits recommended by the World Health Organization for drinking water. It is concluded that water from tube-wells should be treated if used as drinking water.


2018 ◽  
Vol 8 (3) ◽  
pp. 497-507
Author(s):  
Philip Ruciaka Kirianki ◽  
Edward Muchiri ◽  
Natasha Potgieter

Abstract Njoro sub-county in Kenya suffers from constant water shortages causing the residents to rely on both improved and unimproved water sources in the area. The households in the sub-county also use different household storage containers to store drinking water in times when water is not readily available. This study was therefore undertaken to assess selective physico-chemical parameters of water used by the population for drinking purposes using standard assessment methods. A total of 372 water source samples and 162 storage container water samples were tested over a period of three months. Turbidity (0.70–273.85 NTU), iron (0.7–2.10 mg/L), fluoride (0.15–4.01 mg/L), manganese (0.01–0.37 mg/L), and nitrate (0.09–27.90 mg/L) levels in water samples were generally higher than the Kenya Bureau of Standards (KEBS) and/or the World Health Organization (WHO) water quality recommendations for safe drinkable water. The results from this study support the need for continuous monitoring and treating drinking water at the points of collection and of consumption to minimize the long-term health effects on communities consuming this water.


2020 ◽  
Vol 9 (3) ◽  
Author(s):  
Hawraz Sami Khalid ◽  
Hoshyar Saadi Ali ◽  
Dhary Almashhadany

The present study was conducted to evaluate the quality of drinking water in randomly selected schools in Erbil city, Kurdistan Region, Iraq. The water quality indices such as the Heavy metal Pollution Index (HPI) and Heavy metal Evaluation Index (HEI) were applied to characterize water quality. Eighteen schools were incorporated and sampled for their water storage tanks available to students. Water samples and sediment samples from tanks floor were analyzed by Inductively Coupled Plasma Optical Emission Spectrometer for the determination of twenty-two metal elements. In drinking water samples, all detected metals did not exceed the permissible limits of the World Health Organization. The results of this study showed that the average values of HPI and HEI for As, Cd, Cr, Cu, Fe, Pb, Mn, Ni, and Zn were 54.442 and 0.221, respectively. According to data of the water quality indices, the schools drinking water quality are good and suitable for drinking in terms of heavy metals. However, sediments samples contained high concentrations of all elements including the toxic heavy metals (As, Cd, Cr, and Pb). Re-suspension of sediments into water column after refilling storage tanks can pose a serious threat to students drinking water from such vessels. It is therefore recommended that proper storage tanks are provided to the schools accompanied by continuous sanitation and hygiene practice to mitigate the corrosion of tanks to avoid health risks of toxic metal


2021 ◽  
Vol 5 (2) ◽  
pp. 112-116
Author(s):  
F., F. Akinola ◽  
M., O. Lasisi ◽  
B., S. Awe

Groundwater pollution has increased as a result of poor waste disposal practices in developing countries. The purpose of this study was to determine the levels of physicochemical parameters and heavy metal concentrations in order to investigate the impact of dumpsites on groundwater and soil quality in Erinfun community. Four (4) water samples were collected hand dug well and four (4) soil samples designated Ss1 to Ss4 were collected at distances of 10, 20, 30 and 40 m, respectively, away from the waste dumpsite. Physicochemical parameters and traces such as odour, colour, taste and temperature, as well as Biochemical Oxygen Demand, Chemical Oxygen Demand, Dissolve Oxygen, Total Dissolve Solid, pH, and chloride were measured in collected water samples. Collected soil samples were also analyzed for heavy metals such as Magnesium, Zinc, Iron, Chromium, and Lead. All the physical parameters of the water samples analysed were found not to be within the acceptable limit of World Health Organization and Nigerian Standard of Drinking Water Quality standards. The chemical constituents tested were within the acceptable limit of World Health Organization and Nigerian Standard of Drinking Water Quality except for the Biochemical Oxygen Demand, Chemical Oxygen Demand and Dissolve Oxygen of water samples 1 and 2, respectively. The concentration of trace metals in water sample test were within health limit except for Magnesium and Iron which has the highest concentrations in water sample 1 at 10 m away from dumpsite (61.00 mg/l and 0.46 mg/l). Consequently, open dumpsites are discouraged, and constructed standard landfills with appropriate monitoring guidelines are recommended.


2020 ◽  
Vol 3 (3a) ◽  
pp. 38-45
Author(s):  
JK Makpo ◽  
SM Ameh ◽  
A Asarya ◽  
YP Gambo

This work assessed the presence of heavy metals in water contaminated with petroleum products in Keffi Local Government Area. Two water sampling station were selected based on the stratified method of sampling of Antau River. Station A is located along Federal Government College Keffi popularly known as Antau Bridge where Agricultural and mechanical activities, with sales of petroleum product take place. Station B was located at Dadin Kowa known as Gada Manu where human activities such as bathing and washing takes place which served as control. The distance between stations is 1km. The procedural plan of this study was monthly sampling of water from both Stations. Materials such as funnel, sampling container, distilled water, conical flask, filter paper, 50ml polypropylene centrifuge tube, cooler were used. Heavy metal concentration was determined using X – ray Fluorescent Spectroscopy (XRF) at the Center for Energy Research and Training (CERT), Ahmadu Bello University Zaria. The water parameters of the four samples were determined using the Extech instrument. The result on Physico – chemical parameters revealed the values obtained from contaminated water samples to be pH (7.31), Dissolved Oxygen (1.14), Electrical Conductivity (8.22), Total Dissolved Solid (4.13), Temperature (27.45) and Salinity (0.091) while the controlled Station at point B were pH (7.43), DO (7.35), EC (3.14), TDS (1.54), Temperature (26.75), Salinity (0.o94) respectively. From the result obtained, the heavy metal contaminated samples had the following values: Mg (29.31±), Al (218.69±), Si (230.12±), S (1153.65±), Cl (54.25±), Ca (106.56±), Ti (23.66±), Cr (3.15±), Fe (15.92±), Cd (7.54±). For the control sample at point B, the following values were obtained: Mg (27.49±), Al (223.71±), Si (243.21±), S (94.84±), Cl (23.52±), Ca (28.44±), Ti (32.99±), Fe (16.63±), Cd (7.67±) respectively. The P-value was 0.8105 (p>0.05) for the water quality parameters while for the concentration of heavy metal P-value was 0.2054 (p>0.05). This implies that there was no significant difference between the concentrations of elements. However, the concentration values of heavy metals in the contaminated water at Station A and control water samples at Station B were higher than the World Health Organization values (Standard) for drinking water


Author(s):  
A. Ángeles ◽  
E. Quintero ◽  
I. Gaso ◽  
C. P. Zepeda ◽  
T. Palma ◽  
...  

To assess the quality of drinking water in respect to the content of radioactivity, usually is carried out an screening program in the locations of interest, that program consist in pick representative samples of drinking water from the wells in that locations, water samples are analyzed to measuring the gross alpha/beta radioactivity by a low background proportional counter or a liquid scintillation system. When some sample exceeds the normative limit then it must be known which radionuclides are in that sample. Expected radionuclides in water are the NORM (normal occurring radioactive material) from the natural radioactive chains. 226Ra is frequently present in drinking water and is one of most important radionuclide because its “radiotoxicity”, the WHO [World Health Organization, Guidelines for drinking-water Quality, (2016)] recommends a reference level for 226Ra of 1 Bq/L (the dose coefficient for 226Ra is 2.8 x 10-7 Sv/Bq). From a national program of drinking water screening in the Mexican Republic, the samples that exceeded the national normative limits were picked again in the same well and analyzed by LS (liquid Scintillation), using the method of two phases with a not water miscible scintillator cocktail. Results of concentrations of 226Ra from drinking water are presented. In general the content of 226Ra in drinking water samples was lower that the guide values recommended for the WHO.


Sign in / Sign up

Export Citation Format

Share Document