scholarly journals The, K.M. A Study on the Relationship Between Matric Suction and the Void Ratio and Moisture Content of a Compacted Unsaturated Soil

2018 ◽  
Author(s):  
Minh The Kieu ◽  
András Mahler
Keyword(s):  
Moisture Content ◽  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Void Ratio ◽  
Clayey Soil ◽  
Matric Suction ◽  
Moisture Ratio ◽  
Distinct Advantage ◽  
State Variables ◽  
Test Procedures

The volumetric behaviour of compacted unsaturated soils is particularly complex due to the co-existence of three different phases: solid, liquid and air. Matric suction has been perceived as a significant influence on the volumetric behaviour of unsaturated soils and has been used as one of the constitutive variables for most the constitutive models of unsaturated soils in the literature. However, suction-controlled works are complex in practice since they generally require special test procedures and advanced equipment, and usually are very time-consuming. Thus, some researchers have tried to seek alternative frameworks that use the traditional choice of state variables to simulate the behaviour of unsaturated soils. Recently, Kodikara [1] proposed the MPK framework to interpret the behaviour of compacted unsaturated soil in the void ratio (e) – net stress (p) – moisture ratio (ew ) space. The distinct advantage of the model is that it is based on traditional constant moisture content compaction testing which is more common and simple than constant suction loading. The MPK framework has been shown to be capable of presenting the volumetric behaviour of compacted unsaturated soils. However, this framework is expected to use not only for compacted soil but for the behaviour of unsaturated soil in general. The incorporation of soil suction within the MPK framework can be helpful for creating a correlation with previous models which used matric suction as a constitutive variable. This paper presents the development of LWSBS for one clayey soil in Hungary within the MPK framework and then suction is incorporated, which is related to void ratio and moisture ratio through SWCC.

scholarly journals Interpretation of the loading–wetting behaviour of compacted soils within the “MPK” framework. Part I: Static compaction

2016 ◽  
Vol 53 (5) ◽  
pp. 783-805 ◽  
Author(s):  
Tanvirul Islam ◽  
Jayantha Kodikara
Keyword(s):  
Moisture Content ◽  
Unsaturated Soils ◽  
Void Ratio ◽  
Swelling Pressure ◽  
The State ◽  
Moisture Ratio ◽  
Parameter Determination ◽  
Compacted Soils ◽  
Pressure Development ◽  
State Path

Depending on the state paths, loading–wetting of compacted unsaturated soils can exhibit complex volumetric behaviour, such as swelling, collapse, collapse followed by swelling, swelling followed by collapse, and swelling pressure development. Microscopically, these behaviours arise from complex interactions among applied stresses, air–water pressure deficit or suction at the water menisci, moisture content or degree of saturation in the voids, and the nature of the micro- and macrosoil aggregates of compacted soils that depend on the level of suction. While significant advances have been made in modelling hydromechanical behaviour of compacted unsaturated soils taking these interactions into account, input parameter determination requires advanced testing equipment and the testing processes can be very time-consuming. In 2012, a relatively simple and practical framework within the void ratio – moisture ratio (water volume / solid volume) – net stress space (referred to as the MPK framework) has been proposed by Kodikara to explain–predict these state paths. A desirable feature of this framework is that it identifies a direct link between the well-known compaction curve and the compacted soil constitutive behaviour. This paper presents a comprehensive series of tests on statically compacted soils, the results of which are in close agreement with this framework. Two soil types, namely lightly reactive kaolin and more reactive clay (referred to as Merri Creek soil), were used in the testing. The soils were prepared with different moisture contents from the dry state and statically compacted at constant water content to obtain void ratio – moisture ratio – net stress constitutive surfaces, as well as soil specimens for state path tests. The state path test results of yielding under loading, collapse under wetting, swelling pressure development, and change in yield pressure due to wetting are explained within this framework. In addition, some published data on a silty soil mixture were also analysed, highlighting that the framework is valid, regardless of the degree of reactivity of the soil. Suction was not measured in the authors’ experiments, as it was not required to explain the above state paths according to this framework. However, it is recognised that suction is the conjugate state variable to the moisture content. Therefore, in future experiments, suction will be measured and its role will be fully explained within the framework, adding more generality.

scholarly journals Relative performance of two unsaturated soil models using different constitutive variables

2014 ◽  
Vol 51 (12) ◽  
pp. 1423-1437 ◽  
Author(s):  
Martí Lloret-Cabot ◽  
Simon J. Wheeler ◽  
Jubert A. Pineda ◽  
Daichao Sheng ◽  
Antonio Gens
Keyword(s):  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Water Retention ◽  
Experimental Tests ◽  
Experimental Results ◽  
Degree Of Saturation ◽  
State Variables ◽  
Retention Behaviour ◽  
Model Predictions ◽  
Water Retention Behaviour

Mechanical and water retention behaviour of unsaturated soils is investigated in the context of two well established coupled constitutive models, each of which is formulated in terms of a different set of stress state variables or constitutive variables. Incremental relationships describing the volume change and variation of the degree of saturation are derived for each model. These incremental relationships are used to simulate a set of experimental tests on compacted Speswhite kaolin previously reported in the literature. Six individual tests, involving isotropic compression and various forms of shearing, are analyzed in the context of the incremental forms developed, and the model predictions are then compared against experimental results. The results show that, although each constitutive model uses a different set of constitutive variables and a different scheme for coupling mechanical and water retention behaviour, the two sets of model predictions are similar and both sets provide a reasonable match to the experimental results, suggesting that both models are able to capture the relevant features of unsaturated soil behaviour, despite expressing the constitutive laws in different ways.

scholarly journals Effect of soil moisture content on the bearing capacity of small bored piles in the unsaturated soil of Maringá, Paraná, Brazil

2021 ◽  
Vol 337 ◽  
pp. 03006
Author(s):  
Verônica Ricken Marques ◽  
Antonio Belincanta ◽  
Mary-Antonette Beroya-Eitner ◽  
Jorge Luis Almada Augusto ◽  
Ewerton Guelssi ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Bearing Capacity ◽  
Water Content ◽  
Unsaturated Soil ◽  
Soil Layer ◽  
Matric Suction ◽  
Load Test ◽  
Degree Of Saturation ◽  
Static Load Test

In this study, the influence of soil moisture on the bearing capacity of piles founded in an unsaturated clay soil was investigated. The soil studied, composing the upper soil layer in Maringá, Brazil, is lateritic, has degree of saturation between 37% and 70% and has collapsible behaviour when wet. The bearing capacity was determined by full-scale load tests following the Brazilian Standard for Static Load Test. Two pile lengths, 4 m and 8 m, were considered. To analyse the influence of soil moisture, two tests were performed for each pile length: one in soil in its natural moisture content and another in pre-moistened soil. Results show that for both pile lengths, an increase in water content caused a significant reduction in bearing capacity, which is attributed to the decrease in the matric suction of the soil. This is confirmed by the results of the initial evaluation made on the variation of matric suction and its contribution to the bearing capacity with changes in water content. In summary, this study confirms that the pile bearing capacity in unsaturated soil is dependent on soil water content, highlighting the fact that the approach of assuming full saturation condition in the evaluation of the pile bearing capacity in such soil may give erroneous results. Moreover, this study demonstrate that the empirical methods most commonly used in Brazil for pile bearing capacity determination, the Décourt & Quaresma and Aoki & Velloso methods, are overly conservative when applied to the Maringá soil.

Modeling the unsaturated soil zone in slope stability analysis

2014 ◽  
Vol 51 (12) ◽  
pp. 1384-1398 ◽  
Author(s):  
L. L. Zhang ◽  
Delwyn G. Fredlund ◽  
Murray D. Fredlund ◽  
G. Ward Wilson
Keyword(s):  
Shear Strength ◽  
Stability Analysis ◽  
Slope Stability ◽  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Matric Suction ◽  
Slope Stability Analysis ◽  
Engineering Practice ◽  
Rate Of Increase ◽  
Nonlinear Shear

The linear form of the extended Mohr–Coulomb shear strength equation uses a [Formula: see text] parameter to quantify the rate of increase in shear strength relative to matric suction. When the [Formula: see text] value is unknown, a [Formula: see text] equal to 15° is sometimes used in the slope stability study to assess the influence of matric suction on the stability of a slope. In many cases, however, a [Formula: see text] value of zero is used, signifying that the effect of matric suction is ignored. Experiment results have shown that the relationship between the shear strength of an unsaturated soil and matric suction is nonlinear. Several semi-empirical estimation equations have been proposed relating the unsaturated shear strength to the soil-water characteristic curve. In this paper, the results of a study using two-dimensional slope stability analysis along with an estimated nonlinear shear strength equations is presented. The effects of using an estimated nonlinear shear strength equation for the unsaturated soils are illustrated using three example problems. Several recommendations are made for engineering practice based on the results of the example problems. If the air-entry value (AEV) of a soil is smaller than 1 kPa, the effect of matric suction on the calculated factor of safety is trivial and the [Formula: see text] value can be assumed to be zero. If the AEV of a soil is between 1 and 20 kPa, the nonlinear equations of unsaturated shear strength should be adopted. For soils with an AEV value between 20 and 200 kPa, an assumed [Formula: see text] value of 15° provides a reasonable estimation of the effects of unsaturated shear strength in most cases. For soils with an AEV greater than 200 kPa, [Formula: see text] can generally be assumed to be equal to the effective angle of internal friction, [Formula: see text], in applications where geotechnical structures have matric suctions around 100 kPa.

Model for the prediction of shear strength with respect to soil suction

1996 ◽  
Vol 33 (3) ◽  
pp. 379-392 ◽  
Author(s):  
S K Vanapalli ◽  
D G Fredlund ◽  
D E Pufahl ◽  
A W Clifton
Keyword(s):  
Shear Strength ◽  
Soil Water ◽  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Characteristic Curve ◽  
Experimental Studies ◽  
Matric Suction ◽  
Glacial Till ◽  
Soil Suction ◽  
Soil Water Characteristic Curve

Experimental studies on unsaturated soils are generally costly, time-consuming, and difficult to conduct. Shear strength data from the research literature suggests that there is a nonlinear increase in strength as the soil desaturates as a result of an increase in matric suction. Since the shear strength of an unsaturated soil is strongly related to the amount of water in the voids of the soil, and therefore to matric suction, it is postulated that the shear strength of an unsaturated soil should also bear a relationship to the soil-water characteristic curve. This paper describes the relationship between the soil-water characteristic curve and the shear strength of an unsaturated soil with respect to matric suction. Am empirical, analytical model is developed to predict the shear strength in terms of soil suction. The formulation makes use of the soil-water characteristic curve and the saturated shear strength parameters. The results of the model developed for predicting the shear strength are compared with experimental results for a glacial till. The shear strength of statically compacted glacial till specimens was measured using a modified direct shear apparatus. Specimens were prepared at three different water contents and densities (i.e., corresponding to dry of optimum, and wet of optimum conditions). Various net normal stresses and matric suctions were applied to the specimens. There is a good correlation between the predicted and measured values of shear strength for the unsaturated soil. Key words: soil-water characteristic curve, shear strength, unsaturated soil, soil suction, matric suction.

Laboratory testing on an unsaturated soil: equipment, procedures, and first experimental results

1999 ◽  
Vol 36 (1) ◽  
pp. 1-12 ◽  
Author(s):  
C Rampino ◽  
C Mancuso ◽  
F Vinale
Keyword(s):  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Soil Mechanics ◽  
Stress Path ◽  
Matric Suction ◽  
Silty Sand ◽  
Compression Tests ◽  
Water Drainage ◽  
Triaxial Cell ◽  
Unsaturated Soil Mechanics

This paper describes two new apparatuses recently developed at the Università di Napoli Federico II (Italy) in order to test soils under unsaturated conditions. The related experimental procedures and the first results obtained on a dynamically compacted silty sand are also discussed. The devices mentioned are a Bishop and Wesley stress-path cell and a Wissa oedometer, modified to control matric suction and to measure all the stress-strain variables relevant to unsaturated soil mechanics. Specific experimental procedures were established to perform tests under general conditions and were carefully verified during several tests. Using the triaxial cell, isotropic and anisotropic compression stages were carried out under constant suction levels of 0, 100, 200, and 300 kPa. Furthermore, two deviator stages were performed following different stress paths and water drainage conditions. Using the oedometer, an additional suction level (400 kPa) was investigated during compression tests driven up to 5 MPa of vertical net stress (sigmav - ua). This research is a part of a major project in progress at the Dipartimento di Ingegneria Geotecnica of Naples; it is aimed at the experimental analysis of the behaviour of several dynamically compacted soils and at the numerical modelling of boundary problems related to earth structures.Key words: unsaturated soils, equipment layout, silty sand, matric suction.

The Experimental Study of the Influence of the Matric Suction on the Unsaturated Soil Strength

2014 ◽  
Vol 580-583 ◽  
pp. 514-517 ◽  
Author(s):  
Cui Ran Liu
Keyword(s):  
Experimental Study ◽  
Shear Strength ◽  
Moisture Content ◽  
Unsaturated Soil ◽  
Matric Suction ◽  
Saturated Soil ◽  
Triaxial Apparatus ◽  
Soil Shear Strength ◽  
Soil Triaxial Apparatus ◽  
Water Contents

With modified unsaturated soil triaxial apparatus, unsaturated soil shear strength of the tests under the condition of different water contents are done. Experimental results show that the matric suction exist in unsaturated soil and increases with the decrease of moisture content. And the shear strength of unsaturated soil is higher than that of saturated soil. Shear strength of unsaturated soil varies as the matric suction and water content. The shear strength increases when the matric suction increases. when soil tend to be saturated, the matric suction will tend to be zero. And the shear strength of unsaturated soil values gradually close to the strength of the saturated soil.

Influence of stress history on the strength parameters of an unsaturated statically compacted soil

1999 ◽  
Vol 36 (2) ◽  
pp. 251-261 ◽  
Author(s):  
Tomoyoshi Nishimura ◽  
Yasunari Hirabayashi ◽  
Delwyn G Fredlund ◽  
Julian K-M Gan
Keyword(s):  
Shear Strength ◽  
Unsaturated Soil ◽  
Stress Ratio ◽  
Matric Suction ◽  
Strength Parameter ◽  
Direct Shear ◽  
State Variables ◽  
Total Stress ◽  
Stress History ◽  
Compacted Soil

Unsaturated soils are generally near the ground surface and are commonly overconsolidated due to environmental effects. The stress state variables for an unsaturated, in situ profile consist of the net total stress, (σ - ua), and matric suction, (ua - uw), where σ is the total stress (in three directions), ua is the pore-air pressure, and uw is the pore-water pressure. These stress state variables control the behavior of the unsaturated soil. A total stress ratio, TSR, was used in this study as a measure of the stress history. The total stress ratio is defined as the ratio of the compaction pressure to the current confining pressure. Shear tests were conducted using a modified direct shear apparatus on a statically compacted unsaturated soil subjected to various total stress ratios with controlled matric suction. The shear strength parameters (i.e., ϕ', ϕb, and c') for an unsaturated soil were measured using the modified direct shear apparatus. The total stress ratio influences the shear strength parameter ϕb of a compacted soil. The shear strength parameter ϕb decreases with matric suction regardless of the loading history. For a compacted soil with a total stress ratio of 1.0, ϕb was higher than that for the soil tested at a total stress ratio greater than 1.0, regardless of increase in matric suction, and was shown to be influenced by loading history.Key words: unsaturated soil, shear strength, stress history, compacted soil, direct shear test, matric suction.

scholarly journals Safety Factor of Unsaturated Soil Slopes considering the Intermediate Principal Stress Effect and Different Profiles of Matric Suction

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Zhaoxin Li ◽  
Changguang Zhang ◽  
Jingyuan Zhao ◽  
Qing Yan
Keyword(s):  
Shear Strength ◽  
Principal Stress ◽  
Safety Factor ◽  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Matric Suction ◽  
Intermediate Principal Stress ◽  
Stress Effect ◽  
Soil Slopes ◽  
The Stability

Profiles of matric suction are critical for assessing the stability of unsaturated soil slopes, and the strength of unsaturated soils is affected by the intermediate principal stress. This study presents a theoretical formulation of safety factor for infinite unsaturated soil slopes under four different profiles of matric suction using the limit equilibrium method. The unified shear strength equation under plane strain conditions is adopted to capture the effect of intermediate principal stress on the strength of unsaturated soils. The proposed formulation of safety factor is found to have good comparability and broad applicability. The validity of the proposed formulation is demonstrated by comparing its predictions with the results of the extended shear strength method and the finite element method available in the literature. Parametric studies show that the effect of intermediate principal stress on the stability of unsaturated soil slopes is significant; the difference of safety factor among four suction profiles is pronounced, and the safety factor is highest for a linear suction profile. In addition, the safety factor changes with the infiltration depth in two stages, decreases with the slope angle, and increases with effective strength parameters. The results of this study are capable of providing beneficial guidance for optimization designs and disaster preventions of unsaturated soil slopes.

scholarly journals A Review on the Resilient Response of Unsaturated Subgrade Soils

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Xuanxuan Chu
Keyword(s):  
Moisture Content ◽  
Unsaturated Soils ◽  
Resilient Modulus ◽  
Model Development ◽  
Matric Suction ◽  
Affecting Factors ◽  
Wetting And Drying ◽  
Subgrade Soils ◽  
Subgrade Modulus ◽  
Resilient Response

Considering the great contribution of subgrade modulus to the overall performance of roads or railways, it is crucial to provide the best prediction of resilient modulus for their foundations. Incorporating the seasonal variation of moisture content, the resilient modulus variation of unsaturated soils will be accurately predicted. This paper aims to introduce and discuss the knowledge about resilient response of unsaturated soils and emphasize the effects of humidity. A literature review on resilient response of unsaturated soils is presented based on the previous studies. The affecting factors (i.e., wetting and drying, moisture content, and matric suction) were discussed. The prediction model development of the resilient response of unsaturated soils was presented. The limitations and advantages of the model were analyzed and compared. It reveals that the current models were limited regarding stress conditions, moisture content, matric suction, and soil types, and further studies are still needed to achieve a better understanding of resilient response of unsaturated soils.

Sign in / Sign up

Export Citation Format

Share Document