scholarly journals Effects of Elevated Temperatures on the Properties of High Strength Cement Paste Containing Silica Fume

2021 ◽  
Author(s):  
Nabil Abdelmelek ◽  
Éva Lublóy
Keyword(s):  
Compressive Strength ◽  
Ambient Temperature ◽  
Silica Fume ◽  
Cement Paste ◽  
Elevated Temperatures ◽  
High Strength ◽  
Supplementary Cementitious Materials ◽  
Cement Matrix ◽  
Strength Concrete ◽  
Residual Compressive Strength

High strength concrete (HSC) production is worldwide increased and gradually replacing the normal strength concrete (NSC). The cement matrix of concrete is the essential part that governs the behavior and strength of concrete. Several researchers have focused on the performance of hardened cement paste (HCP) at ambient temperature such as using different types of supplementary cementitious materials (SCM). However, the performance of HCP after exposure to elevated temperatures requires further evaluation. The present study investigates the influence of different replacements of silica fume (SF) to cement and different water/binder ratios (w/b) on the compressive strength of HCP before and after exposure to elevated temperatures. Eighteen mixes have been prepared and tested. Results of compressive strength tests at ambient temperature were ranged from 58 to 102 MPa depending on the difference of w/b. Furthermore, a new method has been adopted for comparing the responses of HCP at elevated temperatures "heat endurance". Results showed that using SF enhances the residual compressive strength of HCP after exposure to elevated temperatures due to the pozzolanic reaction and the filler contribution. Mixes containing 6%, 12%, and 15% of SF have shown the highest relative residual compressive strength values for 0.30, 0.35, and 0.40 w/b, respectively. Consequently, the results were significantly affected by changing the w/b ratio. Finally, different measurement techniques were provided to support the work, including Thermo-Gravimetric (TG), Computed Tomography (CT), and Scanning Electron Microscope (SEM) analysis to characterize the loss of mass, porosity, and micro-structure alteration of HCP.

scholarly journals Physical and Mechanical Properties of High-Strength Concrete Modified with Supplementary Cementitious Materials after Exposure to Elevated Temperature up to 1000 °C

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 532 ◽  
Author(s):  
Jianwei Zhou ◽  
Dong Lu ◽  
Yuxuan Yang ◽  
Yue Gong ◽  
Xudong Ma ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Physical Properties ◽  
Water Absorption ◽  
High Strength Concrete ◽  
Elevated Temperatures ◽  
High Strength ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Strength Concrete

This paper presents the experimental findings of a study on the influence of combining usage of supplementary cementitious materials (SCMs) on the performance of high-strength concrete (HSC) subjected to elevated temperatures. In this study, four types of HSC formulations were prepared: HSC made from cement and fly ash (FA), HSC made from cement and ultra-fine fly ash (UFFA), HSC made from cement and UFFA-metakaolin (MK), and HSC made from cement and FA-UFFA-MK. Mechanical and physical properties of HSC subjected to high temperatures (400, 600, 800, and 1000 °C) were studied. Furthermore, the relation between residual compressive strength and physical properties (loss mass, water absorption, and porosity) of HSC was developed. Results showed that the combined usage of SCMs had limited influence on the early-age strength of HSC, while the 28-d strength had been significantly affected. At 1000 °C, the residual compressive strength retained 18.7 MPa and 23.9 MPa for concretes containing 30% UFFA-5% MK and 10% FA-20% UFFA-5% MK, respectively. The specimen containing FA-UFFA-MK showed the best physical properties when the temperature raised above 600 °C. Combined usage of SCMs (10% FA-20% UFFA-5% MK) showed the lowest mass loss (9.2%), water absorption (10.9%) and porosity (28.6%) at 1000 °C. There was a strongly correlated relation between residual strength and physical properties of HSC exposed to elevated temperatures.

scholarly journals The impact of metakaolin, silica fume and fly ash on the temperature resistance of high strength cement paste

2021 ◽  
Author(s):  
Nabil Abdelmelek ◽  
Eva Lubloy
Keyword(s):  
Fly Ash ◽  
Silica Fume ◽  
Cement Paste ◽  
Elevated Temperatures ◽  
High Strength ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Temperature Resistance ◽  
Maximum Temperatures ◽  
The Impact

AbstractThe effects of elevated temperatures on the properties of high-strength cement paste (HSCP) based on metakaolin (MK), silica fume (SF), and fly ash (FA) were studied in the current experimental research. The resistance of HSCP against elevated temperatures was evaluated as well. The new method is expressed by the total area under each curve of strength, known as “temperature resistance”, is adopted. Results of the HSCP mixtures containing MK, SF, and FA with replacements ratios of 9%, 6% and 15% have shown excellent temperature resistance at all levels of maximum temperatures, respectively. Properties added to HSCP by these supplementary cementitious materials (SCM) such as decreasing the amount of CaO and increasing the amounts of SiO2 and Al2O3 have minimized the harmful effects of the use of pure ordinary Portland cement (OPC) at elevated temperatures. The results have shown also that the grinding fineness of OPC influences the amount of optimum replacement of the used SCM on HSCP at elevated temperatures. Hence, the amount of optimum replacement of MK blended with CEM I 42.5 N was 9% whereas, the amount of optimum replacement of MK blended with CEM I 52.5 N shifted to 3%. Finally, the fineness of cement of 4500 cm2 g−1 has shown a better-elevated temperature resistance compared to the cement with a fineness of 4000 cm2 g−1 in case of using pure OPC.

Analysis of Post-Combustion High-Strength Concrete Compressive Strength Using Polypropylene Fibers

2020 ◽  
Vol 26 (1) ◽  
pp. 118-127
Author(s):  
Teuku Budi Aulia ◽  
Muttaqin Muttaqin ◽  
Mochammad Afifuddin ◽  
Zahra Amalia
Keyword(s):  
Compressive Strength ◽  
Thermal Stress ◽  
Silica Fume ◽  
High Temperatures ◽  
High Strength Concrete ◽  
High Strength ◽  
Polypropylene Fibers ◽  
Concrete Compressive Strength ◽  
Strength Concrete ◽  
Maximum Value

High-strength concrete is vulnerable to high temperatures due to its high density. The use of polypropylene fibers could prevent structure explosion by forming canals due to melted fibers during fire, thus release its thermal stress. This study aims to determine the effect of polypropylene fibers on compressive strength of high-strength concrete after combustion at 400ºC for five hours. High-strength concrete was made by w/c-ratio 0.3 with cement amount 550 kg/m3 and added with silica fume 8% and superplasticizer 4% by cement weight. The variations of polypropylene fibers were 0%, 0.2% and 0.4% of concrete volume. The compression test was carried out on standard cylinders Ø15/30 cm of combustion and without combustion specimens at 7 and 28 days. The results showed that compressive strength of high-strength concretes without using polypropylene fibers decreased in post-combustion compared with specimens without combustion, i.e., 0.81% at 7 days and 23.42% at 28 days. Conversely, the use of polypropylene fibers can increase post-combustion compressive strength with a maximum value resulted in adding 0.2% which are 25.52% and 10.44% at 7 and 28 days respectively. It can be concluded that the use of polypropylene fibers is effective to prevent reduction of high-strength concrete compressive strength that are burned at high temperatures.

Mechanical properties of low-strength concrete at exposure to elevated temperatures

2017 ◽  
Vol 8 (4) ◽  
pp. 418-439 ◽  
Author(s):  
Muhammad Masood Rafi ◽  
Tariq Aziz ◽  
Sarosh Hashmat Lodi
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Ambient Temperature ◽  
Elevated Temperatures ◽  
Explosive Spalling ◽  
Content Type ◽  
Strength Concrete ◽  
Testing Programme ◽  
Low Strength ◽  
Low Strength Concrete

Purpose This paper aims to present the results of testing of low-strength concrete specimens exposed to elevated temperatures. These data are limited in the existing literature and do not exist in Pakistan. Design/methodology/approach An experimental testing programme has been employed. Cylindrical specimens of 100 × 200 mm were used in the testing programme. These were heated at temperatures which were varied from 100°C to 900°C in increment of 100°C. Similar specimens were tested at ambient temperature as control specimens. The compressive and tensile properties of heat treated specimens were determined. Findings The colour of concrete started to change at 300°C and hairline cracks appeared at 400°C. Explosive spalling was observed in few specimens in the temperature range of 400°C-650°C which could be attributed to the pore pressure generated by steam. Significant loss of concrete compressive strength occurred on heating temperatures larger than 600°C, and the residual compressive strength was found to be 15 per cent at 900°C. Residual tensile strength of concrete became less than 10 per cent at 900°C. The loss of concrete stiffness reached 85 per cent at 600°C. Residual Poisson’s ratio of concrete increased at high temperatures and became nearly six times larger at 900°C as compared to that at ambient temperature. Research limitations/implications The parameters of the study included heating temperature and effects of temperature on strength and stiffness properties of the concrete specimens. Practical implications Building fire incidents have increased in Pakistan. As a large number of reinforced concrete (RC) buildings exist in the country, the data related to elevated temperature properties of concrete are required. These data are not available in Pakistan presently. The study aims at providing this information for the design engineers to enable them to assess and increase fire resistance of RC structural members. Originality/value The presented study is unique in its nature in that there is no published contribution to date, to the best of authors’ knowledge, which has been carried out to assess the temperature-dependent mechanical properties of concrete in Pakistan.

scholarly journals Effect of silica fume and lateral confinement on fire endurance of high strength concrete columns

2006 ◽  
Vol 33 (1) ◽  
pp. 93-102 ◽  
Author(s):  
V K.R Kodur ◽  
R McGrath
Keyword(s):  
Silica Fume ◽  
Fire Resistance ◽  
High Strength Concrete ◽  
Elevated Temperatures ◽  
Experimental Studies ◽  
High Strength ◽  
Concrete Columns ◽  
Main Concern ◽  
Strength Concrete ◽  
Fire Endurance

Fire represents one of the most severe environmental conditions, and therefore should be properly accounted for in the design of structural members. The increased use of high strength concrete (HSC) in buildings has raised concerns regarding the behaviour of such concrete in fire. In particular, spalling at elevated temperatures, as identified in studies by a number of laboratories, is a main concern. In this paper, results from experimental studies on the fire resistance of HSC columns are presented. A comparison is made of the fire resistance performance of HSC columns with and without silica fume and with different confinement configurations. The effect of silica fume and the effect of confinement on the fire performance of HSC columns will be discussed. The results show that the fire endurance of HSC columns with higher silica fume content is lower and the reduced tie spacing and the provision of cross-ties are beneficial in minimizing the spalling in HSC.Key words: fire resistance, high strength concrete, reinforced concrete columns, spalling.

scholarly journals Fire Performance of Heavyweight Self-Compacting Concrete and Heavyweight High Strength Concrete

Materials ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 822 ◽  
Author(s):  
Farhad Aslani ◽  
Fatemeh Hamidi ◽  
Qilong Ma
Keyword(s):  
Compressive Strength ◽  
Mass Loss ◽  
Modulus Of Elasticity ◽  
High Strength Concrete ◽  
Elevated Temperatures ◽  
High Strength ◽  
Self Compacting Concrete ◽  
Strength Concrete ◽  
Magnetite Content ◽  
Hardened State

In this study, the fresh and hardened state properties of heavyweight self-compacting concrete (HWSCC) and heavyweight high strength concrete (HWHSC) containing heavyweight magnetite aggregate with 50, 75, and 100% replacement ratio, and their performance at elevated temperatures were explored experimentally. For fresh-state properties, the flowability and passing ability of HWSCCs were assessed by using slump flow, T500 mm, and J-ring tests. Hardened-state properties including hardened density, compressive strength, and modulus of elasticity were evaluated after 28 days of mixing. High-temperature tests were also performed to study the mass loss, spalling of HWSCC and HWHSC, and residual mechanical properties at 100, 300, 600 and 900 °C with a heating rate of 5 °C/min. Ultimately, by using the experimental data, rational numerical models were established to predict the compressive strength and modulus of elasticity of HWSCC at elevated temperatures. The results of the flowability and passing ability revealed that the addition of magnetite aggregate would not deteriorate the workability of HWSCCs and they retained their self-compacting characteristics. Based on the hardened densities, only self-compacting concrete (SCC) with 100% magnetite content, and high strength concrete (HSC) with 75 and 100% magnetite aggregate can be considered as HWC. For both the compressive strength and elastic modulus, decreasing trends were observed by introducing magnetite aggregate to SCC and HSC at an ambient temperature. Mass loss and spalling evaluations showed severe crack propagation for SCC without magnetite aggregate while SCCs containing magnetite aggregate preserved up to 900 °C. Nevertheless, the mass loss of SCCs containing 75 and 100% magnetite content were higher than that of SCC without magnetite. Due to the pressure build-up, HSCs with and without magnetite showed explosive spalling at high temperatures. The residual mechanical properties analysis indicated that the highest retention of the compressive strength and modulus of elasticity after exposure to elevated temperatures belonged to HWSCC with 100% magnetite content.

scholarly journals Strength and Microstructural Investigation of Quaternary Blended High-Strength Concrete

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Ayele Bereda ◽  
Belachew Asteray
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
High Strength Concrete ◽  
Setting Time ◽  
Ceramic Powder ◽  
High Strength ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Microstructural Investigation ◽  
Strength Concrete

This research focuses on studying the effect of different supplementary cementitious materials (SCMs) such as waste ceramic powder (WCP), lime powder (LP), and ground granulated blast furnace slag (GGBS) in combination on strength characteristics and microstructure of quaternary blended high-strength concrete. To achieve the aims of the study, necessary physical and chemical composition tests were done for the raw materials. Then, mixes were designed into control mix with 100% Ordinary Portland Cement (OPC) and experimental mixes containing 30%, 40%, 50%, and 60% of GGBS, WCP, and LP in combination. Tests were conducted during casting and at curing ages of 7 and 28 days. Accordingly, the control mix which is concrete grade 50 (C-50) as per American Concrete Institute (ACI) mix design is used as a reference for comparison of test results with those specimens produced by partial replacement of SCMs. The characterizations of high-strength concrete are done using consistency, setting time, workability, compressive strength, flexural strength, and morphological tests. The optimum percentage replacement is 50% OPC replacement by 30% GGBS + 10% WCP + 10% LP. Based on the experimental investigations, the workability increases as the replacement level of SCMs increases from 30% to 60% by weight. Compressive strength and flexural strength results increase up to 11.41% and 20% when the percentage replacement increases from 30% to 50% of SCMs replacement at 28 days of curing time, respectively. There are also improvement in the microstructure and significant cost saving due to replacing OPC partially with SCMs with proportions mentioned above. Therefore, the practice of utilizing increased percentage of SCMs in quaternary blend in concrete can be beneficial for the construction industry and sustainability without compromising the quality of the concrete product.

scholarly journals Behavior of High Strength Concrete Subjected to Elevated Temperature

2019 ◽  
Vol 9 (2) ◽  
pp. 2997-3000
Keyword(s):  
Compressive Strength ◽  
High Strength Concrete ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
High Strength ◽  
Air Cooling ◽  
Split Tensile Strength ◽  
Strength Concrete ◽  
Hardened Properties ◽  
Compressive Strength Of Concrete

The High strength concrete defined as per IS 456 as the concrete having characteristic compressive strength more than 65 MPa. The concrete when subject to fire i.e. elevated temperatures loses its properties at a rapid rate. In the present investigation, ordinary vibrated concrete of M90 grade was developed as per the IS 10262. The hardened properties of concrete like compressive strength and split tensile strength were determined for concrete at ordinary temperature. The concrete specimens were subjected to elevated temperatures of 400oC, 600 oC, and 800 oC and then the specimens were brought to room temperature under different cooling regimes like air cooling and water quenching. The compressive residual strength of concrete was determined and a typical compared was made with the control specimen. The decrease in compressive strength of concrete at 800 oC was high compared to that at 400 oC.

Sign in / Sign up

Export Citation Format

Share Document