scholarly journals Investigation of effect of maize varieties on selected physical properties

2021 ◽  
Vol 9 (1) ◽  
pp. 8-16
Author(s):  
Idowu D. O ◽  
◽  
Onifade T. B. ◽  
Keyword(s):  
Bulk Density ◽  
Coefficient Of Friction ◽  
Geometric Mean ◽  
Angle Of Repose ◽  
Engineering Properties ◽  
Unit Weight ◽  
Equivalent Diameter ◽  
True Density ◽  
Processing Equipment ◽  
Maize Varieties

The engineering properties of some selected variety of maize (SM39, SM40 and Oba Super 6) which is needed in the design and development of a functional handling and processing equipment for the crop was studied. The seeds were bought from the Agricultural settlements in Ogbomoso South-Western Nigeria. The selected properties are size, shape, weight, true density, and bulk density, angle of repose, coefficient of friction, and moisture content. The results of the experiments showed that the mean length was between 8.7 and 9.78 mm; width, 7.69 and 8.26 mm; thickness, 4.11 and 4.60 mm; geometric mean diameter, 7.17 and 7.78 mm; equivalent diameter, 6.62 and 6.62 mm; unit weight, 0.22 and 0.24 g; true density, 954.25 and 1245 kg/m3; bulk density, 734.45 and 752.23 kg/m3, and angle of repose of the three varieties are between 29.20 and 36.60. While the average values of static coefficient of friction measured was between 0.39 and 0.49. The results from this experiment showed that the effect of varieties is significant on the engineering properties of maize. The results obtained from these studies will be useful for the design and manufacturing of operating system for handling and processing of different varieties of maize. Keywords: Engineering properties, design, processing equipment, manufacturing, varities.

scholarly journals Engineering Properties of Peeled and Unpeeled Multiplier Onion

2020 ◽  
Vol 8 (3) ◽  
pp. 232-238
Author(s):  
Dawn C.P. Ambrose
Keyword(s):  
Mechanical Properties ◽  
Physical Properties ◽  
Coefficient Of Friction ◽  
Angle Of Repose ◽  
Engineering Properties ◽  
True Density ◽  
Crushing Strength ◽  
Frictional Properties ◽  
Allium Cepa L ◽  
Multiplier Onion

Multiplier onion (Allium cepa L. var aggregatum. Don.) is mainly used for its unique flavour in seasoning dishes. The unpeeled onions are processed at farm level by means of primary processing and by secondary processing various products like paste, flakes, powder could be produced from peeled onions. For the design of processing and handling equipment knowledge of engineering properties is essential. The engineering properties of peeled and unpeeled multiplier onion were determined. The average values of the physical properties of unpeeled onion were recorded for bulk density and true density as 636.621 and 1526.825 kg/m3 respectively. Similarly for peeled onions, the bulk and true density were 627.03 and 1108.74 kg/m3 respectively. The moisture present in peeled and unpeeled onion was 77.66 % and 74.43% (w.b) respectively. The TSS of multiplier onion was found to be 20° Brix for both peeled and unpeeled samples. The colour values were also measured using colour flex meter for the peeled and unpeeled onions. The frictional properties including coefficient of friction, filling and emptying angle of repose were also measured. Mechanical properties were determined by using a texture analyser. The firmness was measured in terms of penetrating force and crushing strength which were recorded to be 8.59 N and 124.93 N respectively for peeled and 12.00 N and 138.35 N respectively for unpeeled onions.

scholarly journals Physical Attributes and Modelling of Trans- Himalayan Seabuckthorn Berries

2017 ◽  
Vol 5 (3) ◽  
pp. 391-397 ◽  
Author(s):  
SWAPNIL G. JAISWAL ◽  
BHUSHAN R. DOLE ◽  
SANGRAM K. SATPATHY ◽  
S.N. NAIK
Keyword(s):  
Bulk Density ◽  
Surface Area ◽  
Geometric Mean ◽  
Polynomial Model ◽  
Angle Of Repose ◽  
True Density ◽  
North Eastern ◽  
Mean Diameter ◽  
Physical Attributes ◽  
In Trans

Seabuckthorn is a highly perishable fruit found in trans-Himalayan region and North-Eastern part of India. It has enormous nutritional and medicinal properties. Physical attributes of fruits play an important role in the design of machines to meet various harvest and post harvest operations. In the present study properties like dimensions, true density, bulk density, sphericity, porosity and angle of repose were measured and correlated with the mass of the fruit. In addition linear, polynomial, quadratic, logarithmic and exponential models were used for mass and surface area. The length, diameter, thousand berry weight, geometric mean diameter, arithmetic mean diameter, surface area, aspect ratio, angle of repose, sphericity, porosity, true density, bulk density, moisture content were found in the range of 6.5-7.5, 4.74-6.28, 362.67-910.14, 5.49-6.99, 6.17-6.24, 76.87-154.76, 72.81-83.73, 3.59-6.82, 65.84-90.47, 17.05-60.07, 647.19-1399.24, 453.81-725.88, 84.53-87.34 respectively. Polynomial model was suited to be best for mass with length and diameter. Polynomial model between surface area and geometric mean diameter gave highest R2 of 0.981.

Effect of moisture content on physical properties of cashew nut of different varieties

2016 ◽  
Vol 44 (2) ◽  
Author(s):  
Shrikant Baslingappa Swami ◽  
N.J. Thakor A.M. Gawai
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Bulk Density ◽  
Surface Area ◽  
Geometric Mean ◽  
Angle Of Repose ◽  
True Density ◽  
Cashew Nut ◽  
Mean Diameter ◽  
Effect Of Moisture

<p>The physical properties, viz., geometric diameter, surface area, sphericity, volume, bulk density, true density and angle of repose was measured for  four  cashew varieties <em>viz</em>., <em>Vengurle 1, Vengurle 3, Vengurle 4</em>  and <em>Vengurle 7</em> at different moisture content (15 to 87% db). For <em>Vengurle</em> 1 as the moisture content increased, the physical properties i.e., geometric mean diameter, volume, surface area, true density and angle of repose increased from 20.8 to 22.1 mm, 3485 to 4416 mm<sup>3</sup>, 1355 to 1540 mm<sup>2</sup>, 984 to 1030 kg m<sup>-3</sup> and 32 to 37˚, respectively. The sphericity and bulk density decreased from 74.2 to 71.4 per cent and 490 to 418 kg m<sup>-3</sup> respectively. For <em>Vengurle 3</em> geometric mean diameter, volume, surface area, true density and angle of repose increased from 27.2 to 28.6 mm, 7912 to 9169 mm<sup>3</sup>, 2320 to 2567 mm<sup>2</sup>, 1020 to 1048 kg m<sup>-3</sup> and 33 to 35.5˚, respectively. The sphericity and bulk density decreased from 75.5 to 75.2 per cent and 531 to 470 kg m<sup>-3</sup> respectively. For <em>Vengurle 4</em> the geometric mean diameter, volume, surface area, true density and angle of repose increased from 21.0 to 24.1mm, 3362 to 5113 mm<sup>3</sup>, 1391 to 1828 mm<sup>2</sup>, 970 to 1030 kg m<sup>-3</sup> and 32.5 to 38˚,  respectively. The sphericity and bulk density decreased from 65.8 to 66.8 per cent, 517 to 462 kg m<sup>-3</sup>, respectively. For <em>Vengurle 7</em> the geometric mean diameter, volume, surface area, true density and angle of repose increased from 24.2 to 24.9 mm, 5102 to 5547 mm<sup>3</sup>, 1840 to 1941 mm<sup>2</sup>, 998 to 1045 kg m<sup>-3</sup> and 33 to 38˚, respectively. The sphericity and bulk density decreased from 65.4 to 65.8 per cent, 518 to 438 kg m<sup>-3</sup>, respectively.</p>

scholarly journals Physical properties of cumin and caraway seeds

2013 ◽  
Vol 27 (4) ◽  
pp. 491-494 ◽  
Author(s):  
D. Zare ◽  
A. Bakhshipour ◽  
G. Chen
Keyword(s):  
Aspect Ratio ◽  
Moisture Content ◽  
Physical Properties ◽  
Bulk Density ◽  
Geometric Mean ◽  
Equivalent Diameter ◽  
True Density ◽  
Mean Width ◽  
Mean Diameter ◽  
Constant Moisture Content

Abstract Physical properties of cumin and caraway seeds were measured and compared at constant moisture content of 7.5% w.b. The average thousand mass of grain, mean length, mean width, mean thickness, equivalent diameter, geometric mean diameter, surface area, volume, sphericity, aspect ratio, true density, bulk density and porosity were measured for cumin and caraway. There are significant differences (p<0.01) in most physical properties of cumin and caraway, except porosity and sphericity

scholarly journals Physical and engineering properties of BARI released three groundnut varieties

2020 ◽  
Vol 44 (4) ◽  
pp. 609-620
Author(s):  
MA Hoque
Keyword(s):  
Aspect Ratio ◽  
Geometric Mean ◽  
Angle Of Repose ◽  
Engineering Properties ◽  
True Density ◽  
Water Displacement ◽  
Mean Diameter ◽  
Length Width ◽  
Displacement Angle ◽  
Agricultural Machines

The knowledge of the physical characteristics of particles is essential for the designer of agricultural machines. The study was aimed to determine physical and engineering properties of three selected varieties of groundnuts cultivated in Bangladesh such as Dhaka-1, BARI Badam-8 and BARI Badam-9 at safe storage moisture content of 7.5%. One hundred groundnut pods and kernels were randomly selected and the length, width and thickness were measured using a vernier caliper. The geometric mean diameter, sphericity, aspect ratio was calculated using standard formula and measured values. Bulk density, true density, mass and porosity were found through direct weighing and water displacement. Angle of repose of pods and kernels was also measured on wood, glass and mild steel sheet surfaces. BARI Badam-9 had the highest pod geometric mean diameter and BARI Badam-8 had the highest kernel geometric mean diameter. Sphericity of groundnut pod was the highest for Dhaka-1. Surface area of pod and aspect ratio of both pod and kernel were the highest in BARI Badam-9. Porosity of the pod was the least for BARI Badam-8. Angle of repose of kernel varied on wood and glass. But it was similar for kernel on MS sheet for the varieties. This result will be useful to design and develop groundnut processing equipment for different varietal variability Bangladesh J. Agril. Res. 44(4): 609-620, December 2019

scholarly journals MEMPELAJARI KARAKTERISTIK FISIK BIJI KAKAO (Theobrema cacao L.) PADA SUHU PENGERINGAN YANG BERBEDA

2021 ◽  
Vol 10 (2) ◽  
pp. 200
Author(s):  
Sri Waluyo ◽  
Tri Wahyu Saputra ◽  
Nikita Permatahati
Keyword(s):  
Physical Properties ◽  
Bulk Density ◽  
Surface Area ◽  
Geometric Mean ◽  
Economic Value ◽  
Angle Of Repose ◽  
True Density ◽  
Cocoa Beans ◽  
Process Step ◽  
Drying Temperature

Drying is a common process step for agricultural grain products for ease of handling and to achieve the desired quality levels. One of the commodities that have high economic value produced by farmers in Lampung Province is cocoa beans. The drying process may change the physical properties of the cocoa beans and affect the processing of cocoa beans at a later stage. This study aims to determine the effect of drying temperature on changes in the physical properties of cocoa beans such as dimension, volume, weight, surface area, true density, bulk density, porosity, sphericity, and angle of repose. This research was applied to fresh non-fermented cocoa beans in testing. The cocoa beans were dried at temperatures of 40, 50 or 60oC. The research data were then statistically tested using paired sample T-Test at the 95% level to determine whether there is any effect of drying temperature on changes in its physical properties. The results showed a significant effect of drying temperature on weight, volume, geometric mean diameter (Dg), surface area, bulk density, porosity, and angle of repose of cocoa beans. Meanwhile, the sphericity and true density parameters did not significantly change. Keywords: cocoa beans, drying, physical properties

scholarly journals Comparative Studies on Dimensional, Gravimetric and Frictional Properties of Chhattisgarh Popular Paddy Varieties for Suitability of Flaked Rice (Paha)

2020 ◽  
pp. 145-151
Author(s):  
Rahul Dahare ◽  
Tankesh Kumar Nishad ◽  
Bhupendra Sahu
Keyword(s):  
Aspect Ratio ◽  
Bulk Density ◽  
Average Length ◽  
Geometric Mean ◽  
Angle Of Repose ◽  
True Density ◽  
Frictional Properties ◽  
Mean Diameter ◽  
Length Width ◽  
Different Characteristics

The present study on different characteristics of some selected varieties of paddy was undertaken to study dimensional, gravimetric and frictional properties of paddy. The physical properties such as average length, width, thickness, geometric mean diameter, aspect ratio, sphericity, volume, surface area, L/B ratio, true density, bulk density, porosity, angle of repose and coefficient of friction on different surfaces of paddy varieties were measured to have an initial information of the input. All varieties have different dimensional properties, for the length of Rajeshwari, Durgeshwari and Mahamaya paddy variety 9.21 to 9.34 mm, for width 2.41 to 2.79 mm and for thickness 1.83 to 2.45 mm respectively. The geometric mean diameter and aspect ratio for Rajeshwari, Durgeshwari and Mahamaya paddy variety was observed 3.43 to 4.08 mm and 25.21 to 30.13% respectively. True density and bulk density of Rajeshwari, Durgeshwari and Mahamaya paddy variety were observed 1056.86 to 1350.43 kg/m3 and 580.18 to 695.77 kg/m3 respectively. The angle of repose of Rajeshwari, Durgeshwari and Mahamaya paddy variety was observed 42.23° to 48.51°.

Studies on engineering properties of multiplier onion

2021 ◽  
Vol 45 (01) ◽  
pp. 11-18
Author(s):  
B. B. Devojee ◽  
A. Carolin Rathinakumari ◽  
A. K. Dave ◽  
Senthil Kumaran
Keyword(s):  
Geometric Mean ◽  
Physical And Mechanical Properties ◽  
Shape Index ◽  
Angle Of Repose ◽  
Engineering Properties ◽  
Onion Bulb ◽  
Vegetable Crops ◽  
Onion Bulbs ◽  
Successful Design ◽  
Multiplier Onion

The knowledge of physical and mechanical properties of onion bulb is important for successful design of any planter. Multiplier onion is propagated through bulbs and bulbs are planted manually. Manual planting of onion bulb is highly labour intensive (80-100 man-days ha-1) due to the close plant geometry (plant to plant and row to row spacing is 10 × 15 cm) among the vegetable crops. Engineering properties of multiplier onion were determined in order to design and develop a tractor operated raised bed onion bulb planter. In multiplier onion each onion comprises of 4-5 bulbs. These bulbs were cleaned, separated into single bulbs and divided in to 9 categories manually based on their individual weight viz., <2g, 2-3 g, 3-4 g, 4-5 g, 5-6 g, 6-7 g, 7-8 g, 8-9 g, >9 g. The onion bulb had a moisture content of 80.62±0.87 %. It was observed that the properties varied for different sizes of onion grades and the grades had highly significant effect on most of the properties. The linear dimensions of onion bulbs viz., length, width, thickness for nine grades ranged from 21.21±2.60 to 32.31±3.30 mm, 13.54±1.77 to 30.95±2.91 mm and 10.91±1.40 to 22.63±2.15 mm. The geometric mean diameter, sphericity, shape index and projected area all ranged from 28.22±2.04 to 14.54±0.96 mm, 0.87±0.06 to 0.69±0.08, 1.78±0.32 to 1.22±0.14 and 5.50±0.51 to 1.55±0.30 cm2, respectively. The one hundred onion bulb weight, bulk density, true density were in the range of 1185±19.59 to 121.6±6.30 g, 793.20± 9.45 to 480.19±13.13 kg.m-3, 1086± 205.22 to 1013.6±348.85 kg.m-3, respectively. The angle of repose decreased with increase in size of onion bulbs. The interaction between sphericity, shape index and angle of repose indicated that as the size of the onion size increase angle of repose decreased.

scholarly journals Study on some engineering attributes of pine nut (Pinus pinea) to the design of processing equipment

2010 ◽  
Vol 56 (No. 3) ◽  
pp. 99-106 ◽  
Author(s):  
S.M.T. Gharibzahedi ◽  
V. Etemad ◽  
J. Mirarab-Razi ◽  
M. Fos hat
Keyword(s):  
Moisture Content ◽  
Geometric Mean ◽  
Seed Mass ◽  
Static Friction ◽  
Terminal Velocity ◽  
Angle Of Repose ◽  
Engineering Properties ◽  
Pine Nut ◽  
Length Width ◽  
Glass Surfaces

Moisture-dependent engineering properties of pine nut were studied at 6.3, 8.2, 10.8, 14.5, 18.9, and 20.1% moisture content (dry basis). The length, width, thickness, and geometric mean diameter increased significantly (P &lt; 0.05) from 21.75 to 21.85 mm, 7.39 to 7.47 mm, 6.07 to 6.14 mm, and 9.89 to 9.98 mm, respectively, with an increase in moisture content from 6.3% to 20.1%, whereas the increase in sphericity from 45.49% to 45.69% was not significant. Similarly, thousand seed mass, true density, porosity, terminal velocity, and angle of repose increased (P &lt; 0.05) from 0.85 to 0.93 kg, 1043.3 to 1071 kg/m3, 41.31% to 44.57%, 8.67 to 8.83 m/s, and 35.4&deg; to 39&deg;, respectively, with an increase in moisture content under the experimental condition. Moreover, the bulk density decreased significantly (P &lt; 0.05) from 612.3 to 593.6 kg/m3. Coefficient of static friction increased (P &lt; 0.05) from 0.251 to 0.292, 0.241 to 0.271, 0.227 to 0.262, and 0.218 to 0.247 on plywood, galvanized iron sheet, stainless steel, and glass surfaces, respectively, with an increase in moisture content from 6.3% to 20.1%.

scholarly journals Evaluation and Modeling Some Engineering Properties of Three Safflower Varieties

2015 ◽  
Vol 47 (4) ◽  
pp. 23-40
Author(s):  
F. Shahbazi
Keyword(s):  
Moisture Content ◽  
Geometric Mean ◽  
Static Friction ◽  
Terminal Velocity ◽  
Galvanized Steel ◽  
Angle Of Repose ◽  
Engineering Properties ◽  
Seed Moisture Content ◽  
Seed Moisture ◽  
Static Coefficient Of Friction

Abstract Several physical properties of three safflower cultivars (IL-111, LRV51-51 and Zarghan279) at moisture contents of 10, 15, 20 and 25% were determined and compared. All the linear dimensions, geometric mean diameter and sphericity of safflower seeds increase linearly with increase in seed moisture content. The values of geometric properties were higher for IL-111cultivar than the LRV51-51 and Zarghan279 cultivars. The values of the bulk densities decreased, whereas the thousand seeds mass, true density and porosity were increased with increase in seed moisture content. All the gravimetric properties for the three cultivars of safflower were significantly different (p<0.05). The values of the terminal velocity for all cultivars were significantly increased as the moisture content increased. The terminal velocity for the three cultivars of safflower were significantly different (p<0.05). On the two different surfaces, the coefficient of static friction of the IL-111 cultivar was significantly greater than that of the other cultivars. The static coefficient of friction was higher on plywood and lower for galvanized steel. The values of the angle of repose increased with increase of the moisture content. The values of the angle of repose for Zarghan279 cultivar were higher than the IL-111, LRV51-51 cultivars.

Sign in / Sign up

Export Citation Format

Share Document