scholarly journals Analysis of growing degree-days as a climate impact indicator in a region with extreme annual air temperature amplitude

2010 ◽  
Vol 42 (2) ◽  
pp. 143-154 ◽  
Author(s):  
EA Grigorieva ◽  
A Matzarakis ◽  
CR de Freitas
Keyword(s):  
Air Temperature ◽  
Climate Impact ◽  
Growing Degree Days ◽  
Degree Days ◽  
Impact Indicator ◽  
Temperature Amplitude

scholarly journals Long-Term Trends in Air Temperature Distribution and Extremes, Growing Degree‐Days, and Spring and Fall Frosts for Climate Impact Assessments on Agricultural Practices in Nebraska

2012 ◽  
Vol 51 (11) ◽  
pp. 2060-2073 ◽  
Author(s):  
Kari E. Skaggs ◽  
Suat Irmak
Keyword(s):  
Air Temperature ◽  
Central City ◽  
Agricultural Practices ◽  
Growing Season ◽  
Growing Degree Days ◽  
Degree Days ◽  
Temperature Changes ◽  
Growing Season Length ◽  
Average Maximum

AbstractAir temperature influences agricultural practices and production outcomes, making detailed quantifications of temperature changes necessary for potential positive and negative effects on agricultural management practices to be exploited or mitigated. Temperature trends of long-term data for five agricultural locations, ranging from the subhumid eastern to the semiarid western parts of Nebraska, were studied to determine local temperature changes and their potential effects on agricultural practices. The study quantified trends in annual and monthly average maximum and minimum air temperature (Tmax and Tmin), daily temperature range (DTR), total growing degree-days, extreme temperatures, growing‐season dates and lengths, and temperature distributions for five heavily agricultural areas of Nebraska: Alliance, Central City, Culbertson, Fremont, and Hastings. July and August were the months with the greatest decreases in Tmax for the central part of Nebraska—Culbertson, Hastings, and Central City. Alliance, Culbertson, and Fremont had year-round decreases in DTR. Central City and Hastings experienced growing‐season decreases in DTR. Increases in growing‐season length occurred at rates of 14.3, 16.7, and 11.9 days century−1 for Alliance, Central City, and Fremont, respectively. At Hastings, moderately earlier last spring frost (LS) at a rate of 6.6 days century−1 was offset by an earlier (2.7 days century−1) first fall frost (FF), resulting in only a 3.8 days century−1 longer growing season. There were only slight changes in LS and FF dates of around 2 days earlier and 1 day later per century, respectively, for Culbertson.

Comparison of two air temperature based models for predicting phenophase occurrence in Persian lilacs (Syringa chinensis) cultivar Red Rothomagensis

1990 ◽  
Vol 68 (5) ◽  
pp. 1113-1116 ◽  
Author(s):  
Gary W. Moorman ◽  
James L. Rosenberger ◽  
Leslie A. Gladstone
Keyword(s):  
Mathematical Models ◽  
Key Words ◽  
Growth Model ◽  
Air Temperature ◽  
Growing Degree Days ◽  
Bud Break ◽  
Degree Days ◽  
Flower Bud ◽  
Phenological Data ◽  
Vegetative Bud

Phenological data collected for 9–11 years from genetically uniform Persian lilacs (Syringa chinensis L.) cultivar Red Rothomagensis were analyzed to determine whether the number of days elapsed between vegetative bud break and flower bud break is correlated with either the accumulated growing degree-days or the average daily temperature. The lack of statistically significant correlations between these variables suggests these mathematical models cannot accurately predict the onset of flower bud break for this cultivar. Key words: degree-days, growth model, phenology.

Evaluation of Finger Millet Varieties under Rainfed Condition of Eastern India

2017 ◽  
Vol 4 (03) ◽  
Author(s):  
M. K. Singh ◽  
VINOD KUMAR ◽  
SHAMBHU PRASAD
Keyword(s):  
Field Experiment ◽  
Finger Millet ◽  
Yield Potential ◽  
Growing Degree Days ◽  
Eastern India ◽  
Degree Days ◽  
Rainfed Condition ◽  
Net Returns ◽  
Humid Environment ◽  
Use Efficiency

A field experiment was carried out during the kharif of 2014 and 2015 to evaluate the yield potential, economics and thermal utilization in eleven finger millet varieties under the rainfed condition of the sub-humid environment of South Bihar of Eastern India. Results revealed that the significantly higher grain yield (20.41 q ha-1), net returns (Rs 25301) and B: C ratio (1.51) was with the finger millet variety ‘GPU 67’ but was being at par to ‘GPU28’and ‘RAU-8’, and significantly superior over remaining varieties. The highest heat units (1535.1oC day), helio-thermal units (7519.7oC day hours), phenothermal index (19.4 oC days day-1) were recorded with variety ‘GPU 67’ followed by ‘RAU 8’ and ‘GPU 28’ and lowest in ‘VL 149’ at 50 % anthesis stage. Similarly, the highest growing degree days (2100 oC day), helio-thermal units (11035.8 oC day hours) were noted with ‘GPU 67’ followed by ‘RAU 8’ and ‘GPU 28’ at maturity. The highest heat use efficiency (0.97 kg ha-1 oC day) and helio-thermal use efficiency (0.19 kg ha-1 oC day hour) were in ‘GPU 67’ followed by ‘VL 315’.

scholarly journals Determining the critical period for weed control in high-yielding cotton using common sunflower as a mimic weed

2019 ◽  
Vol 33 (6) ◽  
pp. 800-807 ◽  
Author(s):  
Graham W. Charles ◽  
Brian M. Sindel ◽  
Annette L. Cowie ◽  
Oliver G. G. Knox
Keyword(s):  
Weed Control ◽  
Critical Period ◽  
Yield Loss ◽  
Field Studies ◽  
Growing Degree Days ◽  
Degree Days ◽  
Weed Density ◽  
High Level ◽  
The Cost ◽  
Planting Season

AbstractField studies were conducted over six seasons to determine the critical period for weed control (CPWC) in high-yielding cotton, using common sunflower as a mimic weed. Common sunflower was planted with or after cotton emergence at densities of 1, 2, 5, 10, 20, and 50 plants m−2. Common sunflower was added and removed at approximately 0, 150, 300, 450, 600, 750, and 900 growing degree days (GDD) after planting. Season-long interference resulted in no harvestable cotton at densities of five or more common sunflower plants m−2. High levels of intraspecific and interspecific competition occurred at the highest weed densities, with increases in weed biomass and reductions in crop yield not proportional to the changes in weed density. Using a 5% yield-loss threshold, the CPWC extended from 43 to 615 GDD, and 20 to 1,512 GDD for one and 50 common sunflower plants m−2, respectively. These results highlight the high level of weed control required in high-yielding cotton to ensure crop losses do not exceed the cost of control.

scholarly journals Growth and Development of Purple Nutsedge Based on Days or Thermal Units

2015 ◽  
Vol 33 (2) ◽  
pp. 165-173 ◽  
Author(s):  
R.S.O. Lima ◽  
E.C.R. Machado ◽  
A.P.P. Silva ◽  
B.S. Marques ◽  
M.F. Gonçalves ◽  
...  
Keyword(s):  
Plant Growth ◽  
Mathematical Models ◽  
Growth And Development ◽  
Dry Matter ◽  
Cyperus Rotundus ◽  
Growing Degree Days ◽  
Plant Growth And Development ◽  
Degree Days ◽  
Purple Nutsedge ◽  
Independent Trials

This work was carried out with the objective of elaborating mathematical models to predict growth and development of purple nutsedge (Cyperus rotundus) based on days or accumulated thermal units (growing degree days). Thus, two independent trials were developed, the first with a decreasing photoperiod (March to July) and the second with an increasing photoperiod (August to November). In each trial, ten assessments of plant growth and development were performed, quantifying total dry matter and the species phenology. After that, phenology was fit to first degree equations, considering individual trials or their grouping. In the same way, the total dry matter was fit to logistic-type models. In all regressions four temporal scales possibilities were assessed for the x axis: accumulated days or growing degree days (GDD) with base temperatures (Tb) of 10, 12 and 15 oC. For both photoperiod conditions, growth and development of purple nutsedge were adequately fit to prediction mathematical models based on accumulated thermal units, highlighting Tb = 12 oC. Considering GDD calculated with Tb = 12 oC, purple nutsedge phenology may be predicted by y = 0.113x, while species growth may be predicted by y = 37.678/(1+(x/509.353)-7.047).

CHLOROGENIC ACID CONTENT OF SUNFLOWER SEED FLOUR AS AFFECTED BY SEEDING AND HARVEST DATE

1976 ◽  
Vol 56 (4) ◽  
pp. 901-905 ◽  
Author(s):  
D. G. DORRELL
Keyword(s):  
Chlorogenic Acid ◽  
Acid Content ◽  
Vegetative Growth ◽  
Sunflower Seed ◽  
Growing Season ◽  
Growing Degree Days ◽  
Degree Days ◽  
Normal Field ◽  
Seed Flour ◽  
Seeding Date

The effect of seeding date on the chlorogenic acid content of sunflower seed flour was determined by seeding the cultivars Krasnodarets and Peredovik at seven dates, starting on 14 May, over 3 yr. Sequential plantings were made at increments of approximately 70 growing degree days (base = 5.6 C). Plants were harvested at normal field maturity. The time and rate of deposition of chlorogenic acid was determined by harvesting plants at 7-day intervals from 21 to 49 days after flowering. The seeds were dehulled and defatted before determining the chlorogenic acid content of the flour. Chlorogenic acid content declined steadily from an average of 4.22% for the first seeding to 3.30% for the last seeding. About one-half of the total chlorogenic acid was present 21 days after flowering. Deposition continued rapidly for the next 14 days then the level began to stabilize. Delay in seeding tended to shorten the period of vegetative growth and shift the deposition of chlorogenic acid to a cooler portion of the growing season. It is suggested that a combination of these factors caused the reduction in chlorogenic acid content of sunflower flour.

scholarly journals Mid-Holocene climate change in Europe: a data-model comparison

2007 ◽  
Vol 3 (3) ◽  
pp. 499-512 ◽  
Author(s):  
S. Brewer ◽  
J. Guiot ◽  
F. Torre
Keyword(s):  
Climate Change ◽  
Data Model ◽  
General Circulation ◽  
Model Comparison ◽  
General Circulation Models ◽  
Growing Degree Days ◽  
Degree Days ◽  
European Continent ◽  
Holocene Climate Change ◽  
Correct Location

Abstract. We present here a comparison between the outputs of 25 General Circulation Models run for the mid-Holocene period (6 ka BP) with a set of palaeoclimate reconstructions based on over 400 fossil pollen sequences distributed across the European continent. Three climate parameters were available (moisture availability, temperature of the coldest month and growing degree days), which were grouped together using cluster analysis to provide regions of homogenous climate change. Each model was then investigated to see if it reproduced 1) similar patterns of change and 2) the correct location of these regions. A fuzzy logic distance was used to compare the output of the model with the data, which allowed uncertainties from both the model and data to be taken into account. The models were compared by the magnitude and direction of climate change within the region as well as the spatial pattern of these changes. The majority of the models are grouped together, suggesting that they are becoming more consistent. A test against a set of zero anomalies (no climate change) shows that, although the models are unable to reproduce the exact patterns of change, they all produce the correct signs of change observed for the mid-Holocene.

Sign in / Sign up

Export Citation Format

Share Document